Search results for: 'blast gener high for stage'

Make: Caterpillar Model: MD6290 Year: 2012 Hours: 7,934 Track Mounted Rotary Blast Hole Drill Rig Location: United Kingdom Learn More

Make: Caterpillar Model: MD6240 Year: 2015 Hours: 6,727 Track Mounted Rotary Blast Hole Drill Rig Location: United Kingdom Learn More

Make: Caterpillar Model: MD6240 Year: 2016 Track Mounted Rotary Blast Hole Drill Rig Location: United Kingdom Learn More

Capacity: 14,000 Litre Pump: Stalker 80HL - Sand Blasted and Painted - Water Cannon - Spray Bars Water Truck Body Location: Western Australia Learn More

Make: Gardner Denver Model: 200-FXX-001 Type: 5x8 - High Pressure - Fully Refurbished Skid Mounted Mud Pump Location: Queensland, Australia Learn More

Make: Geoprobe Model: 7822DT Year: 2025 Hours: 319 - Geoprobe GH63 Hammer - Tethered and Wireless Remote - 4 Speed Head (4,000 ft-lbf @ 750 RPM) - Dual Winch Kit - 3' Mast Extension - 7" Inch Breakout Kit - H Feed Control / CPT Valve Kit - 140 lbs Auto Drop Hammer - Anvil Hanger - ADH Drive Cap AWJ, Pin Down - 5' Extruder with Moyno 3L6 - Helper Side - 53" Inch Toolbox - Open Storage Box - Drop Rack System w/ Rod Rack - Yoke Vise & Mounting Bracket - High Speed Water Swivel w/ Float - Float Sub NWJ Pin Assembly Track Mounted Drill Rig Location: United States of America Learn More

Make: AFHTechFLOW Package Type: Gas Heating & Pressure Regulating Skid Application: Fuel gas conditioning for gas engine / generator Year: October 2014 Fluid: Natural Gas / Fuel Gas Typical End Use: GE Jenbacher Gas Generator Fuel Gas Train Electrical Supply: 415 V, 3-phase, 50 Hz Heater Power Load: ~11 kW Gas Inlet Connection: Flanged pipeline inlet Gas Outlet Connection: Flanged connection to engine gas train Drains: Heater vessel drain Relief: PSVs vented to atmosphere Earthing: Dedicated skid earth lug Nominal Gas Flow: 330 Nm³/hr Maximum Flow Rate: 330 Nm³/hr Inlet Pressure (Operating): 35 – 90 barg Inlet Pressure (Design / MAOP): 102 barg (upstream of regulator PRV2301) Outlet Pressure (Operating): 4 barg Inlet Temperature: 2 – 60 °C Outlet Temperature: 0 – 40 °C Design Temperature Range: -15 to +60 °C Gas Quality Assumption: Pipeline Quality Natural Gas Gas Heating System; - Electric gas heater, 10.8 kW - Explosion-protected heater suitable for Zone 1 - Carbon steel pressure vessel heater housing - 100 NB, Class 600 - Designed to AS 1210 PT100 RTD temperature elements; - Element sheath over-temperature protection - Heater outlet temperature control Thyristor-controlled heater system; - Control panel supplied separately for non-hazardous area installation - Heater pressure safety relief valve Pressure Control & Safety; - Primary pressure regulator (carbon steel body) - Over-pressure shut-off valve with fracture disk - Pressure safety relief valve (PSV) - Pressure gauges with block and bleed valves - Manual isolation ball valves (Class 800) Gas Filtration & Separation; - Cyclone separator for liquid droplet removal - Particle filter rated >3 µm - Designed to prevent condensate and solids entering engine gas train Fuel Gas Conditioning Skid Location: Queensland, Australia Learn More

Make: Compressor Systems Australia Pty Ltd (CSI) Year: 2012 Vessel Type: Vertical Gas Coalescer Vessel Designed Service: Coal Seam Gas (CSG) Design Code: AS 1210:2010 Hazard Level: B (AS 4343) Registered Design Number: Q26409 - Does NOT INCLUDE Control System Module or Wiring Mechanical (Each Vessel); Internal Volume: 460 L Orientation: Vertical Shell Material: AS1548 PT460NR Head Material: AS1548 PT460 Corrosion Allowance: 3 mm PWHT: Nil Weight; Empty: ~550 kg Full: ~850 kg Pressure & Temperature; Design Pressure: –101.3 kPa to 1,000 kPa Maximum Operating Pressure: 930 kPa Hydrostatic Test Pressure: 1,500 kPa Design Temperature: –10 °C to + 85 °C MDMT: –31 °C Maximum Operating Temperature: 50 °C Internals; - Replaceable coalescing filter elements (micron rating TBC) - Bottom liquid sump with drain connection - Top removable head for element access Total Installed Coalescing Volume: ~920 L Pressure Regulation; Make: Fisher (Emerson) Model: Big Joe® Type 630 Function: Downstream pressure control following coalescing Maximum Differential Pressure: 250 PSIG Casing Pressure: As per manufacturer nameplate Instrumentation; Level / Condensate Monitoring: Rosemount Transmitter Tag: BB76-LIT-700034B - Instrumentation associated with condensate collection and drain system - High-pressure rated instrument chamber Configuration & Key Features; - Parallel twin-vessel (A/B) arrangement - Individual isolation valves per coalescer - Common inlet and outlet headers Designed for: - High-availability CSG operations - Online maintenance - Reduced pressure drop - Protection of downstream compression, metering, and pipelines Asset Classification; Twin Coal Seam Gas (CSG) Coalescer Vessel and Pressure Regulation Skid AS 1210 Pressure Equipment – Hazard Level B Skid Assembly; Overall Dimensions (Approx.): 8.4 m (L) × 2.5 m (W) × 3.8 m (H) - Structural steel skid, gal with grated deck - Integrated access ladder and elevated maintenance platform - Painted carbon steel pipework - Outdoor-rated for field installation Twin Gas Coalescer & Pressure Regulation Skid Location: Queensland, Australia Learn More

Model: 600X Engine: John Deere Tier 4F - Stage V - Model: 4045CI550 @ 173 HP Pull Down Force: 7,000 kg Retract Force: 10,000 kg Feed Down Speed: 0-23 m/min Feed Retract Speed: 0-13.5 m/min Feed Stroke: 2.1 m Mast Dumping: 950 mm Rod Rack Capacity: 100 ft AWJ + 100 ft NQ Auger Rack Capacity: 50 ft of 3 1/4" Inch Hollowed Augers Features; - Engine Leveler - Engine Controller Unit - Pulling/Carrier Winch - 3x Night Lights - 2x Mud Pumps; Progressive Cavity Pump & Piston Pump - High Capacity Winch & Wireline Winch - Double Rod Clamp Breakout System - Automatic SPT Hammer - 16 Speed Rotation Head - Driller Platform - Toolbox Optional Features; - 4x Camera CCTV System - DSE Power Unit Parameters - Drilling Parameters - JD (John Deere) Link Track Mounted Multipurpose Hydraulic Drill Rig Location: United Arab Emirates Learn More

Make: Doosan Model: G100 Year: 2023 Engine: Cummins F3.8 with 82 kW Generator: Stamford AGC250 - Diesel Powered with 100 kVA and 80 kW - Included Socket Combination according to DGUV - FI type B (2x CEE-16A-230V, 1x CEE-32A-400V, 1x CEE-63A-400V - FI type B and 1x CEE-125A-400V - FI type A) - Closed Bottom Environmental Tub - Digital Programmable Dashboard including 50/60 Hz Switching - Standard 176 Litre Tank for 11 Hours Operation - Auto Start/Stop with Customer Signal for Start & Stop - Ground Spike with Cable Quantity: 10 Portable Generators Location: Germany Learn More

Make/Model: DE881 Engine: Cummins QSL9 Inline 6 Cylinder Tier 3 Depth Capacity (Coring): 2,223 m (7,291 ft) N Size Depth Capacity (Reverse Circulation): 450 m (1,470 ft) in Size Feed Force: 11.4 Tonne (25,350 lbf) Pull Force: 23 Tonne (50,700 lbf) Feed Length (Stroke): 7.32 m Speed Up: 65.4 m/min Speed Down: 49 m/min Features; - DA555 Diamond/RC Rod Handler - Hands Free Breakout Tool - FOPS Fitted over the Control Panel - Jaws for N, H & P Size Rod Handler and Rod Clamps - Starter Rods included for N, H & P Sizes - Rotating Rod Guard with Interlock - Front Mount Diesel Engine - Sophisticated Microfeed System - Water/Mud Pump - Water Swivel - Acoustic Enclosure on Engine - Powerful Top Drive Rotation Unit - Self-Energizing Rod Clamp - 1x Rod Clamp to support B, N, H, P & S Rod Sizes; 44.5 to 177.8 mm - Auxiliary Hydraulic Outlets - Multiple Guarding - Onboard Rod Storage - Remote Wedge Interlock Kit - Deck Mounted Wireline Winch - Wireline Counter / Cleaner / Overrun Cut Out - Left-Hand Hydraulic Operated Walkway with Stairs - Fluid Catch Tray (Under Engine) - High Pressure Filter Kit - Hose Sleeving on High Risk Hoses - Airline Oiler + Options Drill Rig Location: TBA (New Build - Built to Order) Learn More

Make/Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Features; - Radio Remote Tramming with No Driver Compartment - FOPS Fitted over Control Panel - Rotating Rod Guard with Interlock - "P" Size Rotation Unit with Chuck Drive and Hollow Spindle - Stepless Rotation Speed Control - Pilot Hydraulic Controls - Self-Propelled Drill Unit - 1x Rod Clamp to support B, N, H, P & S Rod Sizes; 44.5 to 177.8 mm - Fits in a high cube 40' Foot closed Shipping Container - Hydraulically Operated Left-Hand and Right-Hand Walkways - Tier 3 or Stage 5 / Tier 4 Diesel Engine Models Available - Wireline Spooler - Fire Suppression System - Main Winch Travel Limiter - Safety Spin capable of making up and breaking out of Rod Joints during tripping operations + Options Track Mounted Drill Rig Location: TBA (New Build - Built to Order) Learn More

Make: MPI Model: NF500 Year: 2024 Hours: 11 - Triplex - Oversize transmission cooler fitted to radiator support - All high pressure piping, Cameron Gauges, PRV’s, etc. have test certificates - Pulsation Dampener has design registration certificates - Transmission has lock indicators visible to the operator - Transmission has over temp alarms and lights, and “quick to neutral” to further protect the transmission - Dual post battery isolators and starter isolators - Test certificates and register for the hydraulic hosing for the self- loading legs Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn More

Make: MPI Model: NF500 Year: 2024 Hours: 26 - Triplex - Oversize transmission cooler fitted to radiator support - All high pressure piping, Cameron Gauges, PRV’s, etc. have test certificates - Pulsation Dampener has design registration certificates - Transmission has lock indicators visible to the operator - Transmission has over temp alarms and lights, and “quick to neutral” to further protect the transmission - Dual post battery isolators and starter isolators - Test certificates and register for the hydraulic hosing for the self- loading legs Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn More

Drill Bits; Model: DHD380 Size: 8" Inch / 9" Inch / 10" Inch - T45 & T51 - 85 mm to 135 mm - Includes some Shank Adaptors and Couplings, etc. Quantity: Approx. 200 Shank Adaptors; Make: Sandvik Model: HL1000T45 / HL1000T51 - Third Shank but size unknown; 3" Inch Blast Hole Bits Hammer Rock Drill Bits Location: Northern Territory, Australia Learn More

Model: HD-500 Engine: Detroit 8V-92TA / 450HP @ 2,100 RPM Flow Rate: Up to 7.5 BPM / 315 GPM / 1,200 LPM High Pressure: Up to 13,500 PSI Dimensions; Length: 6,058 mm Width: 2,438 mm Height: 2,591 mm Weights; Unit Weight: 11,000 kg Frame Max: 15,000 kg Stacking Mass: 194,000 kg Skid Mounted Triplex Pump Unit Location: United Arab Emirates Learn More

Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - Warman Clamps - Under Casing Clamps - Wireline and Main Winch - Rod Bin - Auger Carrying Rack at Front of Rig - Auto SPT - Silvan Pump - Repair Kit for Silvan Pump - All New Suction and Hydraulic Hoses for Pump with Camlocks - 2x Mud Tanks (1,000 L & 500 L - Plastic) - 1x 7x5 Trailer with Fold Out Canopy + 12 Volt Fridge & Esky (In a locked container) - 2x Gas Bottles & Cookers (Mounted on Front of Trailer) - 2x 20 Litre Water Containers (Mounted on Front of Trailer) Down Hole Gear - 10x 3m PQ Rods Plus Shorts - 10x 3m HQ Rods Plus Shorts - 10x 3m NQ Rods Plus Shorts - 10x 3m Junior Mayhew Rods with Spanner Flats Plus 2x 1.5 m - 5x 100mm x 1.5m Augers Plus Bit & 20 Pins - 2x 1.5 NMLC Core Barrels - 6x NMLC Core Bits - 4x Impreg & 2x Surface Set - 40x Core Lifters / 6x Cases / 40x Stop Rings - 2x NMLC Reamers - 2x BQ Reamers - 3x BQ Core Bits - 2x 1.5m NQ3 Core Barrels - 2x Sets of Splits - 1x 3m NQ3 Core Barrel - 2x Locking Couplings - 2x Adaptor Couplings - Box of Barrel Spares - 1x HQ/NQ Overshot - 1x Set of PQ, HQ, NQ Inner Tube Wrenches - 10x 75mm Shelby Tubes Plus Drive Head - 10x 50mm Shelby Tubes Plus Drive Head - 2x SPT Samplers - 2x Pulling Plugs - 1x Spare Water Swivel Plus 2x Repair Kits - 1x Repair Kit for Rig Swivel - Many Subs to Facilitate all the Drilling Requirements - Stillsons - 2x 36" Inch, 2x 24" Inch & 2x 18" Inch - 1x Gas Mig Welder - 1x Honda 3.5 kVA Powered Generator - 1x PQ Birds Mouth for Water Return to Mud Tanks - 1x HQ Birds Mouth for Water Return to Mud Tanks - New Suction and Delivery Hoses - 1x 100mm Down Hole Hammer with 2x Bits 118mm *New* - 1x 75mm Down Hole Hammer with 2x Bits 95mm *New* - 2x 1.5m HQ3 Core Barrels - 2x 3m HQ3 Outer & Inner Splits - 1x 3m NQ3 Outer & Inner Splits - 4x HQ3 Core Bits - 20x HQ3 Core Lifters, Stop Rings & Cases Support Truck Make: Mitsubishi Model: Canter Year: 2009 Type: 4x4 - Hydraulic Hi-Ab Crane - 500 Litre Water Tank - 400 Litre Diesel Tank for Rig & 12 Volt Pump - 1x kVA Inverter - Wired so diesel pump won't engage until the switch is turned on in the locked tool box. - 1x Centrifugal Pump 1 1/2" Inch plus Suction and Delivery Hoses with Camlocks - 2x Tool Boxes - 1x Box of Hand Spanners & Sockets - Fitted Drill Rod Bins & Core Barrel Bins - Currently Registered until May 2025 Tracked Mounted Drill Rig Support Truck + Down Hole Gear Package Location: New South Wales, Australia Learn More

Make: Brevini Year: 2017 Hours: 0 (Complete Overhaul in June 2025) Weight: 1,650 kg - All Hydraulics and Electrics have been fully re-conditioned - 55kW Electric Motor driving a hydraulic pump, which in turn drives a reciprocating high pressure water pump with a maximum output of 90L/min of water at 180 Bar pressure. - The complete pump system has been designed to run continuously and all equipment is housed within a fully enclosed cover. - As the motor drives a hydraulic pump, the high pressure water output is fully adjustable while the motor runs at a constant speed, unlike a high pressure water pump that is direct driven by a fixed speed electric motor. Additionally, because the hydraulic circuit incorporates an unloader valve, it is possible to switch the high pressure water on and off without the need to stop the motor or bypass high pressure water into a holding tank. - The hydraulics system is of robust construction containing 300L of oil and an integrated oil cooler. - The system can also be used as a 55 kW hydraulic power pack. Skid Mounted Pump Location: Queensland, Australia Learn More

Make: Gardner Denver Model: SCH2500 Year: 1990 approx. Engine: Cummins 6 BTA 5.9 Serial Number: 2711468 - Includes Drill Rods and Sampling Equipment Complete Overhaul; - Hammer HPRI - New Head Injectors on Fuel Pump - Track and Final Drives - Oil Cooler Replaced with CAT Cooler and mounted on left hand side Hydratrack Track Mounted Blast Hole Drill Rig Location: Queensland, Australia Learn More

Make: Komatsu Model: D155AX-7 Year: 2014 Hours: 3,683 Engine: Komatsu SAA6D140E-6 @ 360 HP Horsepower: 360 HP Automatic Transmission: Komatsu TORQFLOW Max. Speed Forward: 11.6 km/h Max. Speed Reverse: 14 km/h Hydraulic System: CLSS Tare: 39,700 kg Shoe Width: 610 mm Blade Width: 4,060 mm - SS Ripper - Unique Torque Converter with Auto Lock-Up - EU Stage IIIB - Selectable Working Modes - Adjustable Eco-Gauge and Idle Caution Track Mounted Crawler Dozer Location: New Zealand Learn More