Search results for: 'boart gener hire for spare'

Make: Atlas Copco Model: Mustang F-13 Year: 2011 Hours: 5,302 Serial Number: CRG112662111-1 Accessories: Surplus Rods & Spare Parts Capacity; HQ: 800 Metres PQ: 350 Metres Open Hole: 650 Metres (Depends on Type of Rods used) - Upgraded from Original Spec (Completed by Atlas Copco) - Hydraulic System (Bigger Pumps) & Gear Box (Rotation Unit) + Bigger Cooling Pack to Hydraulic - Two Speed Main Winch @ 8 Tonne Pullback - Head @ 13 Tonne Pullback - 140 Trido Flush Pump Track Mounted Multipurpose Drill Rig Location: Tasmania, Australia Learn More

Make: Desco Model: DSMP 600 - Minimal Use (Always stored out of weather) Spares Include; - Liners - Valves - Valve Seats - Drive Rods - Seals Duplex Piston Mud Pump Location: Western Australia Learn More

Make: Gardner Denver Type: 5x6 Engine: Kubota V3300 4 Cylinder Water Cooled - Diesel Driven - Manual Clutch - Belt Drive - Pulsation Dampener - OTECO Pin Pressure Valve - 200 Litre Fuel Tank Dimensions; Length: 2,950 Width: 1,500 Height: 2,300 Weight: 2.4 Tonne Skid Mounted Duplex Mud Pump Location: Queensland, Australia Learn More

Make: Sandvik Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Track Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Exploration Drill Masters EDM Model: 95K Year: 2018 Hours: 32,431 Drill Head Hours: 32,431 Compressor Hours: 32,431 Onboard Air Pack: Sullair 1,150 CFM / 500 PSI Air Compressor - Spare Parts available (can provide a detailed list with pricing) - EDM MK2 Core Rod Feeder (For additional $USD350,000) Track Mounted Drill Rig Location: United States of America Learn More

Make: AFHTechFLOW Package Type: Gas Heating & Pressure Regulating Skid Application: Fuel gas conditioning for gas engine / generator Year: October 2014 Fluid: Natural Gas / Fuel Gas Typical End Use: GE Jenbacher Gas Generator Fuel Gas Train Electrical Supply: 415 V, 3-phase, 50 Hz Heater Power Load: ~11 kW Gas Inlet Connection: Flanged pipeline inlet Gas Outlet Connection: Flanged connection to engine gas train Drains: Heater vessel drain Relief: PSVs vented to atmosphere Earthing: Dedicated skid earth lug Nominal Gas Flow: 330 Nm³/hr Maximum Flow Rate: 330 Nm³/hr Inlet Pressure (Operating): 35 – 90 barg Inlet Pressure (Design / MAOP): 102 barg (upstream of regulator PRV2301) Outlet Pressure (Operating): 4 barg Inlet Temperature: 2 – 60 °C Outlet Temperature: 0 – 40 °C Design Temperature Range: -15 to +60 °C Gas Quality Assumption: Pipeline Quality Natural Gas Gas Heating System; - Electric gas heater, 10.8 kW - Explosion-protected heater suitable for Zone 1 - Carbon steel pressure vessel heater housing - 100 NB, Class 600 - Designed to AS 1210 PT100 RTD temperature elements; - Element sheath over-temperature protection - Heater outlet temperature control Thyristor-controlled heater system; - Control panel supplied separately for non-hazardous area installation - Heater pressure safety relief valve Pressure Control & Safety; - Primary pressure regulator (carbon steel body) - Over-pressure shut-off valve with fracture disk - Pressure safety relief valve (PSV) - Pressure gauges with block and bleed valves - Manual isolation ball valves (Class 800) Gas Filtration & Separation; - Cyclone separator for liquid droplet removal - Particle filter rated >3 µm - Designed to prevent condensate and solids entering engine gas train Fuel Gas Conditioning Skid Location: Queensland, Australia Learn More

Make: Iveco Model: Acco 2350G Year: 1993 KM's: 221,000 Engine: Cummins 6 Cylinder Transmission: 9 Speed Road Ranger GVM: 35,000 kg - 12.00 R 20 Tyres - 90% Tyres All Round Plus Spares - 7.5 Metre Tray - 2,200 Litre Bunded Fuel Cell - 7,500 Litre Center Mount Water Tank - New Clutch Tray Truck Location: Western Australia Learn More

Make: Boart Longyear Length: 3 Metre Condition: Good Quantity: 104 (312 Metres) - 60% Life Left - Variety of Shorts HQ Drill Pipe / Rods Location: Western Australia Learn More

Drill Rig Make: UDR Model: 650 Year: 1996 Engine: Rebuilt 4 Cylinder Detroit - Rebuilt Drill Head - Main Ram Rebuilt - New Holdback and Microfeed Valves - New Cameron Gauge - New Main Winch Hydraulic Motor - New Secondary Valve Bank - Jack Legs Resealed and New Piston Seals - New Hydraulic Charge Pump - Hydraulic Pumps tested and making full pressure - Bean Pump Pistons just replaced - New Mast Slides - Outrigger Front Jack Legs - Spare Pulldown Ropes (New) - Rebushed Foot Clamps with New HQ and PQ Slips (NQ Slips included too) Truck Make: Mack Model: Quantum 435 HP Twin Steer Truck Mounted Drill Rig Location: New South Wales, Australia Learn More

Make: Doosan Model: G100 Year: 2023 Engine: Cummins F3.8 with 82 kW Generator: Stamford AGC250 - Diesel Powered with 100 kVA and 80 kW - Included Socket Combination according to DGUV - FI type B (2x CEE-16A-230V, 1x CEE-32A-400V, 1x CEE-63A-400V - FI type B and 1x CEE-125A-400V - FI type A) - Closed Bottom Environmental Tub - Digital Programmable Dashboard including 50/60 Hz Switching - Standard 176 Litre Tank for 11 Hours Operation - Auto Start/Stop with Customer Signal for Start & Stop - Ground Spike with Cable Quantity: 10 Portable Generators Location: Germany Learn More

Make: Atlas Copco Model: E-Air V1100 VSD Year: 2020 Hours: 2,405 Skid Mounted Air Compressor Location: Queensland, Australia Learn More

Make: Black Diamond Model: HJGW400 Year: 2023 Hours: 260 Engine: Cummins 4BTA Bean Pump: AD413, Max PSI: 550, Max RPM: 500, KW: 2.4, KPA: 3,792, HP: 3.2, GPM: 9, LPM: 34 Rod Bin: 80 m Mayhew Jr 3M Rods (Near New) Capability: 200M with 6” Hammer Hole Diameter: 110 - 305 mm Max Drilling Depth: 400 m Rotation Torque: 3,500 Nm Rotation Speed: 0-200 RPM Feeding Capacity: 100 Kn Feed Stroke: 200 Kn Drill Rod Length: 6 m Travel Speed: 2.5 km/h Dimensions (L x W x H - Transportation): 6,700 mm x 1,800 mm x 2,650 mm Dimensions (Working): 4,350 mm x 2,850 mm x 7,320 mm Weight: 9.5 Tonne Track Mounted Geothermal Drill Rig Location: Queensland, Australia Learn More

Make: FMC Model: L1122D Engine: Yanmar 4TNV Rated Pressure: 1,000 PSI Design Flowrate: 50 US GPM - Linde Hydraulic Pump (Coupled to the Diesel via Adaptor) - Linde Hydraulic Motor (Driving FMC Pump) - Flexible coupling between Pump and Hydraulic Motor (Comes with Guard) - Oil Cooler (Comes with Cooling Oil Tank) - Boart Longyear Pressure Relief Valve (Adjustable) - Rated up to 1,100 PSI - Hydac 1 Litre Bladder Accumulator - Maquarrie Control Panel - Structural Steel Base with Lifting Eyes - Battery Skid Mounted Mud Pump Location: New South Wales, Australia Learn More

Make: FMC Model: L1122D Engine: Yanmar 4TNV Rated Pressure: 1,000 PSI Design Flowrate: 50 US GPM - Linde Hydraulic Pump (Coupled to the Diesel via Adaptor) - Linde Hydraulic Motor (Driving FMC Pump) - Flexible coupling between Pump and Hydraulic Motor (Comes with Guard) - Oil Cooler (Comes with Cooling Oil Tank) - Boart Longyear Pressure Relief Valve (Adjustable) - Rated up to 1,100 PSI - Hydac 1 Litre Bladder Accumulator - Maquarrie Control Panel - Structural Steel Base with Lifting Eyes - Battery Skid Mounted Mud Pump Location: New South Wales, Australia Learn More

Rig Make: Edson Model: CP-Tiga Series Year: 1994 - Repair History since 2021 available - Off Road from November 2022 to October 2025 for repairs (Rear Diff) - Serviced and Ready - Aluminium Traction Tracks/Ramps - Mounted Auger & Drill Bit - Spare Auger Extensions (Plain) - 1x 1.5 Metre Concrete Cutting Drill Bit - 1x 1.0 Metre Concrete Cutting Drill Bit - Rock Drilling Bit - Soil Sampler - Other Spare Parts & Fittings Vehicle Make: Toyota Landcruiser Model: 79 Series Year: 2000 KM's: 443,920 - Spare Tyre - Spare Brake Drums (Need to be machined) Ute Mounted Drill Rig Location: Victoria, Australia Learn More

Make: Mobile Drill Model: B37 Year: 2012 Refurbished Year: 2025 (Comprehensively Rebuilt & Upgraded) Hours: 1,830 Engine: John Deere 4045TF285 Diesel Engine @ 99 HP Feed Stroke: 4 Metres with 15,700 lb Retract Force Rod Pull: 6 Metres Haul/Wireline/Jib Winch: 8,500 lb Front Mounted Recovery Winch: 20,000 lb Track Base: Remote Controlled MT-20 with Engineered FOPS for operator safety Rebuild & Upgrade; - Traverse Assembly & Traverse Box replaced and upgraded - New Toa-Tone SP8000 Sonic Drill Head (Oscillation Head) - New Hydrovane Compressor - New Tracks for improved mobility and stability - Upgraded Spindle Attachment - Full Service Completed with regular servicing history maintained Includes; - Dump Mast - Triple Clamp with Make & Break - Auto SPT Hammer - Bean W1122D Pump - Caterpillar CAT 430 Injection Pump - 10 Speed Mobile Drill Head - 30 Metres Sonic Tooling (140 mm Casing / 115 m Barrel) - Spares + Consumables - Upgraded Sonic Tooling to Boart Longyear standard Track Mounted Sonic + Conventional Drill Rig Location: Queensland, Australia Learn More

Make: Weir Minerals Model: MHD-100HV Rated RPM: 186 kW @ 2,200 RPM Suction Diameter: 150 mm Discharge Diameter: 200 mm Suction Flange: 406 OD x 200 ID 8 Holes 21 Dia. On 356 PCD Discharge Flange: 368 OD x 150 ID 8 Holes 21 Dia. On 324 PCD - Hydraulic Powered Highwall Pump Unit Location: Western Australia Learn More

Drill Rig Make: Boart Longyear Model: LF160C Year: 2020 Installed Power: 194 kW Working Pressure: 380 bar Head Torque: 665 I / 90 II daNm Head Rotation: 250 I / 1,050 II RPM Feed Force: 7,000 daN Retract Force: 17,000 daN Feed Length: 7,200 mm Tracks Make: Strickland Track Mounted Drill Rig Location: Queensland, Australia Learn More

Drill Rig Make: Boart Longyear Model: LF160C Year: 2022 Installed Power: 194 kW Working Pressure: 380 bar Head Torque: 665 I / 90 II daNm Head Rotation: 250 I / 1,050 II RPM Feed Force: 7,000 daN Retract Force: 17,000 daN Feed Length: 7,200 mm Tracks Make: Strickland Model: 6000428 Year: 2022 Track Mounted Drill Rig Location: Queensland, Australia Learn More

Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - Warman Clamps - Under Casing Clamps - Wireline and Main Winch - Rod Bin - Auger Carrying Rack at Front of Rig - Auto SPT - Silvan Pump - Repair Kit for Silvan Pump - All New Suction and Hydraulic Hoses for Pump with Camlocks - 2x Mud Tanks (1,000 L & 500 L - Plastic) - 1x 7x5 Trailer with Fold Out Canopy + 12 Volt Fridge & Esky (In a locked container) - 2x Gas Bottles & Cookers (Mounted on Front of Trailer) - 2x 20 Litre Water Containers (Mounted on Front of Trailer) Down Hole Gear - 10x 3m PQ Rods Plus Shorts - 10x 3m HQ Rods Plus Shorts - 10x 3m NQ Rods Plus Shorts - 10x 3m Junior Mayhew Rods with Spanner Flats Plus 2x 1.5 m - 5x 100mm x 1.5m Augers Plus Bit & 20 Pins - 2x 1.5 NMLC Core Barrels - 6x NMLC Core Bits - 4x Impreg & 2x Surface Set - 40x Core Lifters / 6x Cases / 40x Stop Rings - 2x NMLC Reamers - 2x BQ Reamers - 3x BQ Core Bits - 2x 1.5m NQ3 Core Barrels - 2x Sets of Splits - 1x 3m NQ3 Core Barrel - 2x Locking Couplings - 2x Adaptor Couplings - Box of Barrel Spares - 1x HQ/NQ Overshot - 1x Set of PQ, HQ, NQ Inner Tube Wrenches - 10x 75mm Shelby Tubes Plus Drive Head - 10x 50mm Shelby Tubes Plus Drive Head - 2x SPT Samplers - 2x Pulling Plugs - 1x Spare Water Swivel Plus 2x Repair Kits - 1x Repair Kit for Rig Swivel - Many Subs to Facilitate all the Drilling Requirements - Stillsons - 2x 36" Inch, 2x 24" Inch & 2x 18" Inch - 1x Gas Mig Welder - 1x Honda 3.5 kVA Powered Generator - 1x PQ Birds Mouth for Water Return to Mud Tanks - 1x HQ Birds Mouth for Water Return to Mud Tanks - New Suction and Delivery Hoses - 1x 100mm Down Hole Hammer with 2x Bits 118mm *New* - 1x 75mm Down Hole Hammer with 2x Bits 95mm *New* - 2x 1.5m HQ3 Core Barrels - 2x 3m HQ3 Outer & Inner Splits - 1x 3m NQ3 Outer & Inner Splits - 4x HQ3 Core Bits - 20x HQ3 Core Lifters, Stop Rings & Cases Support Truck Make: Mitsubishi Model: Canter Year: 2009 Type: 4x4 - Hydraulic Hi-Ab Crane - 500 Litre Water Tank - 400 Litre Diesel Tank for Rig & 12 Volt Pump - 1x kVA Inverter - Wired so diesel pump won't engage until the switch is turned on in the locked tool box. - 1x Centrifugal Pump 1 1/2" Inch plus Suction and Delivery Hoses with Camlocks - 2x Tool Boxes - 1x Box of Hand Spanners & Sockets - Fitted Drill Rod Bins & Core Barrel Bins - Currently Registered until May 2025 Tracked Mounted Drill Rig Support Truck + Down Hole Gear Package Location: New South Wales, Australia Learn More