Search results for: 'brand gener hire for side'

Make: Sandvik Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Track Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Caterpillar Model: D9 Hours: Approx. 1,300 Engine: Caterpillar C18 @ 477 HP Track Shoes: 610 mm Track Rollers: 8 + 8 (Both Sides) - SS Ripper - SU Single Tilt Blade - Air Conditioned Cabin Track Mounted Crawler Bulldozer Location: India Learn More

Make: Terex Model: Hi-Ranger TM105 Year: 2007 Hours: 1,026 / 711 (PTO) Working Height: 105' Foot / 32 Metre Side Reach: 51' Foot / 15.5 Metre - 66kV Insulated Boom - Flashing Beacons - In Date until 12/2030 *Truck Is Not Included* Elevating Work Platform Location: Western Australia Learn More

Make: Tow Haul Model: 165TH Year: 2023 Tyres: 27:00R49 - 165 Short Tonne - 150 Tonne Metric - Brand New & Never Assembled (13 Pieces & 3 Containers) - Visibility Package - Auto Lube System - Rear Winch *Picture is stock of a different unit* Trailer Location: Canada Learn More

Make: Rockdrill Model: RD700 Hours: 33,037 - Mounted on Modified Caterpillar Log Skidder - Recently Replaced Skidder Turbo - Deutz 6 Cylinder Turbocharged Power Pack - 2x Brand New Hydraulic Pumps & 1x Used - Onboard Sullair 500 CFM / 350 PSI Air Compressor with Caterpillar CAT 3208 Engine (Hours: 4,924) - 150x Metres of RC Rods - 4x Hammers inc. 1x Open Water Bore Hammer and Blade Bits - Several Pallets of Spare Parts, Consumables, and Spare Tyre - Blade on Front for ease of Track/Pad Set Up - Hasn't been operated in 2 years but has since deteriorated a few hoses and ram seals from sitting - Emergency Stop System needs work - Started every 4 months to keep oil around internals but needs work before job - Not Registered Modified Log Skidder Drill Rig Location: Queensland, Australia Learn More

Make: Wacker Neuson Model: TH412 Year: 2020 Hours: Less than 500 Engine: Yanmar 3TNV80FT @ 25HP Chassis Operating Pressure: 5,510 PSI / 380 bar Hydraulic Operating Pressure: 3,190 PSI / 220 bar Payload Max: 1,250 kg Payload Lift Max: 1,250 kg Lift Bucket Swivel: 4,537 mm Dimensions Length: 3,944 mm (2,991 mm w/out Bucket) Width: 1,564 mm Height: 5,280 mm (1,995 mm Just Cab) Weight: 2,750 kg - Forklift Attachment - Side Shift - Air Conditioning / Heating & Ventilation - ROPS / FOPS tested with VSG safety window on right side - Front, Roof & Rear Wipers - Heated Rear Window - Tilt Display - Sun Shade - Bottle Holder - Storage Net - LED Work Lights (1x Front & 1x On Cab Roof) Telehandler Location: Western Australia Learn More

Type: Cavins 80 Tonne Model C (Chinese Copy) Slips: 2 3/8" Inch / 2 7/8" Inch / 3 1/2" Inch Condition: Brand New Tubing Spider Location: Victoria, Australia Learn More

Make: Geoprobe Model: 7822DT Year: 2025 Hours: 319 - Geoprobe GH63 Hammer - Tethered and Wireless Remote - 4 Speed Head (4,000 ft-lbf @ 750 RPM) - Dual Winch Kit - 3' Mast Extension - 7" Inch Breakout Kit - H Feed Control / CPT Valve Kit - 140 lbs Auto Drop Hammer - Anvil Hanger - ADH Drive Cap AWJ, Pin Down - 5' Extruder with Moyno 3L6 - Helper Side - 53" Inch Toolbox - Open Storage Box - Drop Rack System w/ Rod Rack - Yoke Vise & Mounting Bracket - High Speed Water Swivel w/ Float - Float Sub NWJ Pin Assembly Track Mounted Drill Rig Location: United States of America Learn More

Make: AFHTechFLOW Package Type: Gas Heating & Pressure Regulating Skid Application: Fuel gas conditioning for gas engine / generator Year: October 2014 Fluid: Natural Gas / Fuel Gas Typical End Use: GE Jenbacher Gas Generator Fuel Gas Train Electrical Supply: 415 V, 3-phase, 50 Hz Heater Power Load: ~11 kW Gas Inlet Connection: Flanged pipeline inlet Gas Outlet Connection: Flanged connection to engine gas train Drains: Heater vessel drain Relief: PSVs vented to atmosphere Earthing: Dedicated skid earth lug Nominal Gas Flow: 330 Nm³/hr Maximum Flow Rate: 330 Nm³/hr Inlet Pressure (Operating): 35 – 90 barg Inlet Pressure (Design / MAOP): 102 barg (upstream of regulator PRV2301) Outlet Pressure (Operating): 4 barg Inlet Temperature: 2 – 60 °C Outlet Temperature: 0 – 40 °C Design Temperature Range: -15 to +60 °C Gas Quality Assumption: Pipeline Quality Natural Gas Gas Heating System; - Electric gas heater, 10.8 kW - Explosion-protected heater suitable for Zone 1 - Carbon steel pressure vessel heater housing - 100 NB, Class 600 - Designed to AS 1210 PT100 RTD temperature elements; - Element sheath over-temperature protection - Heater outlet temperature control Thyristor-controlled heater system; - Control panel supplied separately for non-hazardous area installation - Heater pressure safety relief valve Pressure Control & Safety; - Primary pressure regulator (carbon steel body) - Over-pressure shut-off valve with fracture disk - Pressure safety relief valve (PSV) - Pressure gauges with block and bleed valves - Manual isolation ball valves (Class 800) Gas Filtration & Separation; - Cyclone separator for liquid droplet removal - Particle filter rated >3 µm - Designed to prevent condensate and solids entering engine gas train Fuel Gas Conditioning Skid Location: Queensland, Australia Learn More

Suitable for Mineral Exploration with Ingersoll Rand T3W, Atlas Copco TH60 or Similar Includes; - Western Rubber 25CM-4 Top Swivel - Discharge Gooseneck - Side Air Inlet Swivel with Quill Reverse Circulation Drilling Swivels Package Location: United States of America Learn More

Make: Tatra Model: OTA 7815-2 Year: 2007 KM's: 162,000 GVM: 41,000 kg GCM: 71,000 kg Type: 8x8 - Hiab 0992230 Crane - Handrails - Fold Away Ladders (Both Sides) - Air Conditioned Cab (Just been serviced) - Ring Feeder - 70mm Tow Hitch Flat Top Tray Truck Location: Western Australia Learn More

Make: Doosan Model: G100 Year: 2023 Engine: Cummins F3.8 with 82 kW Generator: Stamford AGC250 - Diesel Powered with 100 kVA and 80 kW - Included Socket Combination according to DGUV - FI type B (2x CEE-16A-230V, 1x CEE-32A-400V, 1x CEE-63A-400V - FI type B and 1x CEE-125A-400V - FI type A) - Closed Bottom Environmental Tub - Digital Programmable Dashboard including 50/60 Hz Switching - Standard 176 Litre Tank for 11 Hours Operation - Auto Start/Stop with Customer Signal for Start & Stop - Ground Spike with Cable Quantity: 10 Portable Generators Location: Germany Learn More

Make: Atlas Copco Model: E-Air V1100 VSD Year: 2020 Hours: 2,405 Skid Mounted Air Compressor Location: Queensland, Australia Learn More

Make: Black Diamond Model: HJGW400 Year: 2023 Hours: 260 Engine: Cummins 4BTA Bean Pump: AD413, Max PSI: 550, Max RPM: 500, KW: 2.4, KPA: 3,792, HP: 3.2, GPM: 9, LPM: 34 Rod Bin: 80 m Mayhew Jr 3M Rods (Near New) Capability: 200M with 6” Hammer Hole Diameter: 110 - 305 mm Max Drilling Depth: 400 m Rotation Torque: 3,500 Nm Rotation Speed: 0-200 RPM Feeding Capacity: 100 Kn Feed Stroke: 200 Kn Drill Rod Length: 6 m Travel Speed: 2.5 km/h Dimensions (L x W x H - Transportation): 6,700 mm x 1,800 mm x 2,650 mm Dimensions (Working): 4,350 mm x 2,850 mm x 7,320 mm Weight: 9.5 Tonne Track Mounted Geothermal Drill Rig Location: Queensland, Australia Learn More

Make: FMC Model: L1122D Engine: Yanmar 4TNV Rated Pressure: 1,000 PSI Design Flowrate: 50 US GPM - Linde Hydraulic Pump (Coupled to the Diesel via Adaptor) - Linde Hydraulic Motor (Driving FMC Pump) - Flexible coupling between Pump and Hydraulic Motor (Comes with Guard) - Oil Cooler (Comes with Cooling Oil Tank) - Boart Longyear Pressure Relief Valve (Adjustable) - Rated up to 1,100 PSI - Hydac 1 Litre Bladder Accumulator - Maquarrie Control Panel - Structural Steel Base with Lifting Eyes - Battery Skid Mounted Mud Pump Location: New South Wales, Australia Learn More

Hammers; 1x Halco 8" Inch Hammer - Running 8" Inch Bits - 1x Used & 1x New 1x Halco 8" Inch Hammer - With Integral Spiral Stabiliser to give 10" Inch OD - Running 10" Inch Bits with Retention; 2x Used - Good Condition & 1x Brand New Drill Pipe; Length: 4.5" Inch Type: 2 7/8" Inch IF Threads - Most Near New - Done 6x Bores (All less than 100 Metres) - Cleaned & Greased - Fitted with Thread Caps & Plugs Drill Pipe & Hammers Package Location: South Australia Learn More

Make: Hydco Model: 8V92 Year: 2021 Hours: 7,370 - New Air Side at 500 hours - Pistons, Rings, Barrels, etc. all out of Hydco - New Blower fitted in December with 60 hours - New Fuel Rack and Tune Up completed - Spare PRV's 1,800 CFM 900 PSI Skid Mounted Booster Location: Northern Territory, Australia Learn More

Make: Weir Minerals Model: MHD-100HV Rated RPM: 186 kW @ 2,200 RPM Suction Diameter: 150 mm Discharge Diameter: 200 mm Suction Flange: 406 OD x 200 ID 8 Holes 21 Dia. On 356 PCD Discharge Flange: 368 OD x 150 ID 8 Holes 21 Dia. On 324 PCD - Hydraulic Powered Highwall Pump Unit Location: Western Australia Learn More

Make: Caterpillar Model: 773G Year: 2014 Hours: 23,585 Idle Hours: 13,606 - New Tank - 3x Adjustable Rear Spray Heads - 2x Side Spray Heads - Hose Reel - Water Cannon - Top Fill Water Truck Location: United States of America Learn More

Make: Everdigm Model: Rocky B180 Bit Shank: N180 Shank Connection: API 8-5/8" Inch Reg. Pin Piston Stroke: 5.75" Inch Cylinder Bore: 12.28" Inch Hole Sizes: 18" Inch ~ 26" Inch Wrench Size: A/F 14" Inch - Brand New - Bailing Subs/Break Out Plate, etc. - Hammer forklift cradle included - 19” Hammer bit included (unused) RS Hammer Location: Queensland, Australia Learn More