Search results for: 'dozer shale prime head hire cip cjt64 cfm'

Make: Atlas Copco Model: Mustang F-13 Year: 2011 Hours: 5,302 Serial Number: CRG112662111-1 Accessories: Surplus Rods & Spare Parts Capacity; HQ: 800 Metres PQ: 350 Metres Open Hole: 650 Metres (Depends on Type of Rods used) - Upgraded from Original Spec (Completed by Atlas Copco) - Hydraulic System (Bigger Pumps) & Gear Box (Rotation Unit) + Bigger Cooling Pack to Hydraulic - Two Speed Main Winch @ 8 Tonne Pullback - Head @ 13 Tonne Pullback - 140 Trido Flush Pump Track Mounted Multipurpose Drill Rig Location: Tasmania, Australia Learn More

Drill Rig Make: Thor Year: 2007 Hours: 1,905 Air Compressor: 600 CFM / 350 PSI Max. Diameter Depth: 130 mm Max. Aircore Depth: 150 mm Wheel Base: MB 6x6 Drill Angles: 55 to 90 degrees - 3 Axle SPV (No Load Over Axle Mass Limits) Rig Truck Make: Mercedes Benz Model: Actros 3341A Year: 2006 Engine: 54194500455057 VIN: WDB9301832L123007 Type: 6x6 GVM: 33,000 kg Support Truck Make: Tatra Year: 2007 Engine Number: T3C92881608002752 VIN: TNU28PR257KO42431 Water Capacity: 2,500 Litres Fuel Capacity: 4,500 Litres - 3 Axle Rigid Vehicle (No Trailer over 4.5 Tonne Gross) Pig Trailer Make: Park Body Builders Year: 2008 VIN: 6T9T23WA18017E011 - 1 Axle Trailer / Semi-Trailer Truck Mounted Drill Rig Water & Fuel Support Truck Location: Western Australia Learn More

Drill Rig Hours: 457 Engine: Perkins 4.236 Air Compressor: Sullair 600 CFM / 200 PSI Air Compressor Engine: Caterpillar CAT 3208 @ 250 HP Compressor Hours: 29 Drilling Method: Air Core & RAB Drilling Depth: 120 m Drilling Angles: 55 to 90 degrees Drill Rod Specifications: 3" Inch Air Core Additional Equipment; - Dump Mast - 4 Metre Head Travel - Auto Rod Spinners - Automatic Brake Outs - Onboard Cyclone - Water Injection Dust Suppression Truck Make: Hino Model: GT1J Series 2 Year: 2007 KM's: 13,264 GVM: 13,000 kg GCM: 21,000 kg Support Truck Make: Hino Model: GT 8J (GT 1322) Year: 2008 KM's: 83,514 GVM: 13,000 kg GCM: 21,000 kg Water Capacity: 2,500 Litres Fuel Capacity: 4,500 Litres Truck Mounted Drill Rig Tray Top Water & Fuel Support Truck Location: Western Australia Learn More

Drill Rig Make: KL Model: 150 Year: 1996 Hours: 8,120 Engine: Cummins Air Compressor: 800 CFM / 280 PSI Drilling Method: Air Core & RAB Drilling Depth: 120 m Drilling Angles: 55 to 90 degrees Drill Rod Specifications: 3" Inch Air Core / 3.5" Inch RC Rods (Slimline RC) Mounted: Morooka MST-2500 with Mercedes Benz Engine Serial Number: 95/016 Additional Equipment; - Dump Mast - 4 Metre Head Travel - Auto Rod Spanners - Automatic Brake Outs - Onboard Cyclone - Water Injection Dust Suppression Dimensions; Height: 3 m Length: 6 m Width: 3 m Support Truck Make: Iveco Year: 2011 Type: 4x4 Water Capacity: 2,500 Litres Fuel Capacity: 4,500 Litres Track Mounted Drill Rig Bulk Water & Fuel Support Truck Location: Western Australia Learn More

Make: VersaDrill Model: KmN1.4sm Year: 2022 Hours: 3,500 Depth Capacity: N Size @ 2,294 m (7,526 ft) Rotary Head Ratio: 1:2,33 Speed: 0 to 1,250 RPM Spindle Interior Dimension: 124 mm (4.9" Inches) Hydraulic Motor: 160 CC Variable Track Mounted Core Drill Rig Location: United States of America Learn More

Make: Tsurumi Model: 80SFQ211 Discharge: 80 mm Frequency: 50 Hz Total Head Max.: 44 m Capacity Max.: 1.94 m3/min Phase: 3 Induction Motor Output: 11 kW Voltage: 380/400/415 Current: 22.5/21.0/21.0 - Sea Water Quality - Installed & Commissioned (Never Used) Quantity: 2 Submersible Pumps Location: Western Australia Learn More

Make: Norton Clipper Model: 70184693006 BBL350 3 Phase Cutting Length: 500 mm Bore Maximum Cutting Depth: 125 mm Blade: 500 mm x 25.4 mm Maximum Material Height: 355 mm - 4.0kW / 415 Volt - Stay level blade guard - Conveyor cart with non-slip rubber and tilt lock wheels - Water return channels - Fully protected blade support shaft - Crank controlled cutting depth adjustment and head locking device - Accurate and stable cut - Dry and clean area improving users comfort - Users safety and bearings protection - Shock-free cutting, good pressure control for better cutting quality - Accurate cutting depth adjustment and straight through cutting Economical Block Saw Location: Western Australia Learn More

Make: Gardner Denver Type: 5x6 Engine: Kubota V3300 4 Cylinder Water Cooled - Diesel Driven - Manual Clutch - Belt Drive - Pulsation Dampener - OTECO Pin Pressure Valve - 200 Litre Fuel Tank Dimensions; Length: 2,950 Width: 1,500 Height: 2,300 Weight: 2.4 Tonne Skid Mounted Duplex Mud Pump Location: Queensland, Australia Learn More

Make: Austex Model: X1550 Hours: 5,200 - Setup to be removed from truck - New Head fitted to rig in 2025 - MWL Rod Loader fitted in 2025 - Major Overhaul to meet MDG15 Compliance 2025 - Can Include the Rod Sloop (that matches truck) for the extra price @ $26,900 ex GST Drill Rig Location: New South Wales, Australia Learn More

Make: Western Star Model: 4900 Year: 1994 KM's: 695,477 Hours: 18,429 Type: 6x4 Prime Mover Truck Location: Queensland, Australia Learn More

Make: Kenworth Model: T404 Year: 1999 KM's: 697,090 Type: 6x4 Prime Mover Truck Location: Queensland, Australia Learn More

Make: Sandvik Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Track Mounted Drill Rig Location: Queensland, Australia Learn More

Rig Make: Reichdrill Model: T-100 Year: 1992 Hours: 3,567 Engine: Cummins (700 HP) Pull Up: 50 Tonne Pull Down: 20 Tonne Capacity: 1,200 m - Hydraulic Pipe Handler attached to Mast - 2 Speed Head - 140 RPM Max. Rotation - 132,000 lb Torque - Manual Slips w/ Dies to suit 2 3/8" Inch, 2 7/8" Inch & 3 1/2" Inch Pipe - Has sat for 3 years, need some refurbishment - Heavy Duty, Deep Water Rig Carrier Make: Custom Miles: 17,064 Engine: Cummins Crane Carrier Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Exploration Drill Masters EDM Model: 95K Year: 2018 Hours: 32,431 Drill Head Hours: 32,431 Compressor Hours: 32,431 Onboard Air Pack: Sullair 1,150 CFM / 500 PSI Air Compressor - Spare Parts available (can provide a detailed list with pricing) - EDM MK2 Core Rod Feeder (For additional $USD350,000) Track Mounted Drill Rig Location: United States of America Learn More

Make: Geoprobe Model: 7822DT Year: 2025 Hours: 319 - Geoprobe GH63 Hammer - Tethered and Wireless Remote - 4 Speed Head (4,000 ft-lbf @ 750 RPM) - Dual Winch Kit - 3' Mast Extension - 7" Inch Breakout Kit - H Feed Control / CPT Valve Kit - 140 lbs Auto Drop Hammer - Anvil Hanger - ADH Drive Cap AWJ, Pin Down - 5' Extruder with Moyno 3L6 - Helper Side - 53" Inch Toolbox - Open Storage Box - Drop Rack System w/ Rod Rack - Yoke Vise & Mounting Bracket - High Speed Water Swivel w/ Float - Float Sub NWJ Pin Assembly Track Mounted Drill Rig Location: United States of America Learn More

Make: Schramm Model: AD400AC Year: 2012 Hours: 10,600 Mast Top Head Travel: 4.7 m Mast Slide (Dump): 2.38 m Pullback Capacity: 13,607 kg (30,000 lb) - Rod Loader with 120 Metre Capacity of 3.5" Inch x 3 Metre RC Rods (Rods Not Included) - FMC EO413 Water Injection Pump (82 LPM @ 48 Bar / Max Pressure: 103 Bar) - Rotary Head (0-146 RPM / 6,022 Nm (4,442 ft lb) - 800 Litre Fuel Tank - 1,000 Litre Water Tank Refurbishments; - All Hydraulic Pumps fully reconditioned (Only have less than 4,000 hours) - Compressor fully reconditioned (Less than 4,000 hours) - Complete Mast changed (Less than 4,000 hours) - Engine & Hydraulic Cooler (Less than 4,000 hours) - CAT 3406 Engine (10,600 hours) Fully Reconditioned & In stock, can arrange to fit to rig for extra - Sullair Air Compressor 20/12 H 1,150 CFM / 1,800 RPM to 1,350 CFM / 1,800 RPM (Max Discharge Pressure: 500 PSI @ 1,150 CFM & 350 PSI @ 1,350 CFM) - Fully Reconditioned (Little less than 8,000 hours) Track Mounted Drill Rig Location: New Caledonia Learn More

Rig Make: Schramm Model: T685WS Year: 2007 Hours: 1,624 Engine: MTU 12V-2000 Pullback: 74,000 lbs Air Compressor: Sullair 1,350 CFM / 350 PSI to 1,150 CFM / 500 PSI - Winch - Hammer Lubricator - Water Injection with Soap Pump - Set Up for 25x Lengths of 4 1/2" Inch Drill Pipe - 6" Inch & 8" Inch Hammers - Diverters - Subs - Wrenches - Tooling, etc. Truck Make: Sterling Model: LT9500 Miles: 1,729 Truck Mounted Drill Rig Location: United States of America Learn More

Rig Make: Schramm Model: T555 Year: 2004 Hours: 10,445 Engine: Caterpillar C15 565 HP Diesel Torque: 75,348 lbs @ 0-131 RPM Pullback: 40,000 lbs Pulldown: 30,000 lbs Air Compressor: Sullair 1,050 CFM / 350 PSI - Engine Preheater - FMC Bean Water Injection Pump - Pipe Trough - 300 Feet of Drill Pipe - Stabiliser - DTH Hammer - Table Bushings Truck Make: Sterling Year: 2004 Miles: 29,972 Engine: Mercedes Benz 450 HP Diesel Truck Mounted Drill Rig Location: United States of America Learn More

Rig Make: Schramm Model: T660 Rotadrill Year: 1984 Hours: 4,131 Air Compressor: GHH 750 CFM / 250 PSI @ 2,100 RPM Deck Engine: Detroit 8V92 Diesel Winch Pullback: 44,000 lbs - Caterpillar Water Injection System - Set Up as Top Head Air Rotary - 7 Rod Carousel - Hammer Oiler Truck Make: Brigadier Engine: Caterpillar 3208 Miles: 41,546 Transmission: 13 Speed GVW: 53,320 lbs FVW: 15,320 lbs RVW: 38,000 lbs Drill Pipe; - 4 1/2" Inch - 220' Foot Bottle Neck Truck Mounted Drill Rig Location: United States of America Learn More

Make: Compressor Systems Australia Pty Ltd (CSI) Year: 2012 Vessel Type: Vertical Gas Coalescer Vessel Designed Service: Coal Seam Gas (CSG) Design Code: AS 1210:2010 Hazard Level: B (AS 4343) Registered Design Number: Q26409 - Does NOT INCLUDE Control System Module or Wiring Mechanical (Each Vessel); Internal Volume: 460 L Orientation: Vertical Shell Material: AS1548 PT460NR Head Material: AS1548 PT460 Corrosion Allowance: 3 mm PWHT: Nil Weight; Empty: ~550 kg Full: ~850 kg Pressure & Temperature; Design Pressure: –101.3 kPa to 1,000 kPa Maximum Operating Pressure: 930 kPa Hydrostatic Test Pressure: 1,500 kPa Design Temperature: –10 °C to + 85 °C MDMT: –31 °C Maximum Operating Temperature: 50 °C Internals; - Replaceable coalescing filter elements (micron rating TBC) - Bottom liquid sump with drain connection - Top removable head for element access Total Installed Coalescing Volume: ~920 L Pressure Regulation; Make: Fisher (Emerson) Model: Big Joe® Type 630 Function: Downstream pressure control following coalescing Maximum Differential Pressure: 250 PSIG Casing Pressure: As per manufacturer nameplate Instrumentation; Level / Condensate Monitoring: Rosemount Transmitter Tag: BB76-LIT-700034B - Instrumentation associated with condensate collection and drain system - High-pressure rated instrument chamber Configuration & Key Features; - Parallel twin-vessel (A/B) arrangement - Individual isolation valves per coalescer - Common inlet and outlet headers Designed for: - High-availability CSG operations - Online maintenance - Reduced pressure drop - Protection of downstream compression, metering, and pipelines Asset Classification; Twin Coal Seam Gas (CSG) Coalescer Vessel and Pressure Regulation Skid AS 1210 Pressure Equipment – Hazard Level B Skid Assembly; Overall Dimensions (Approx.): 8.4 m (L) × 2.5 m (W) × 3.8 m (H) - Structural steel skid, gal with grated deck - Integrated access ladder and elevated maintenance platform - Painted carbon steel pipework - Outdoor-rated for field installation Twin Gas Coalescer & Pressure Regulation Skid Location: Queensland, Australia Learn More