Search results for: 'hiab for siev in deg ram bean'

Rig Make: Revathi Model: T650WM - Air Compressor - FMC Bean Pump - Duplex Mud Pump - Fire Extinguisher Truck Make: Volvo Model: FM9 Year: 2005 KM's: 362,000 Type: 10x4 Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Model: Single Ram PSI: 3,000 Bore Size: 11" Inch Temp Class: T-20/250 Dimensions: 82.5" x 29.8" x 22.6" Weight: 3,813 lb Blowout Preventer BOP Location: Queensland, Australia Learn More

Make: Rockdrill Model: RD700 Hours: 33,037 - Mounted on Modified Caterpillar Log Skidder - Recently Replaced Skidder Turbo - Deutz 6 Cylinder Turbocharged Power Pack - 2x Brand New Hydraulic Pumps & 1x Used - Onboard Sullair 500 CFM / 350 PSI Air Compressor with Caterpillar CAT 3208 Engine (Hours: 4,924) - 150x Metres of RC Rods - 4x Hammers inc. 1x Open Water Bore Hammer and Blade Bits - Several Pallets of Spare Parts, Consumables, and Spare Tyre - Blade on Front for ease of Track/Pad Set Up - Hasn't been operated in 2 years but has since deteriorated a few hoses and ram seals from sitting - Emergency Stop System needs work - Started every 4 months to keep oil around internals but needs work before job - Not Registered Modified Log Skidder Drill Rig Location: Queensland, Australia Learn More

Rig Make: Schramm Model: T555 Year: 2004 Hours: 10,445 Engine: Caterpillar C15 565 HP Diesel Torque: 75,348 lbs @ 0-131 RPM Pullback: 40,000 lbs Pulldown: 30,000 lbs Air Compressor: Sullair 1,050 CFM / 350 PSI - Engine Preheater - FMC Bean Water Injection Pump - Pipe Trough - 300 Feet of Drill Pipe - Stabiliser - DTH Hammer - Table Bushings Truck Make: Sterling Year: 2004 Miles: 29,972 Engine: Mercedes Benz 450 HP Diesel Truck Mounted Drill Rig Location: United States of America Learn More

Make: Tatra Model: OTA 7815-2 Year: 2007 KM's: 162,000 GVM: 41,000 kg GCM: 71,000 kg Type: 8x8 - Hiab 0992230 Crane - Handrails - Fold Away Ladders (Both Sides) - Air Conditioned Cab (Just been serviced) - Ring Feeder - 70mm Tow Hitch Flat Top Tray Truck Location: Western Australia Learn More

Drill Rig Make: UDR Model: 650 Year: 1996 Engine: Rebuilt 4 Cylinder Detroit - Rebuilt Drill Head - Main Ram Rebuilt - New Holdback and Microfeed Valves - New Cameron Gauge - New Main Winch Hydraulic Motor - New Secondary Valve Bank - Jack Legs Resealed and New Piston Seals - New Hydraulic Charge Pump - Hydraulic Pumps tested and making full pressure - Bean Pump Pistons just replaced - New Mast Slides - Outrigger Front Jack Legs - Spare Pulldown Ropes (New) - Rebushed Foot Clamps with New HQ and PQ Slips (NQ Slips included too) Truck Make: Mack Model: Quantum 435 HP Twin Steer Truck Mounted Drill Rig Location: New South Wales, Australia Learn More

Make: Black Diamond Model: HJGW400 Year: 2023 Hours: 260 Engine: Cummins 4BTA Bean Pump: AD413, Max PSI: 550, Max RPM: 500, KW: 2.4, KPA: 3,792, HP: 3.2, GPM: 9, LPM: 34 Rod Bin: 80 m Mayhew Jr 3M Rods (Near New) Capability: 200M with 6” Hammer Hole Diameter: 110 - 305 mm Max Drilling Depth: 400 m Rotation Torque: 3,500 Nm Rotation Speed: 0-200 RPM Feeding Capacity: 100 Kn Feed Stroke: 200 Kn Drill Rod Length: 6 m Travel Speed: 2.5 km/h Dimensions (L x W x H - Transportation): 6,700 mm x 1,800 mm x 2,650 mm Dimensions (Working): 4,350 mm x 2,850 mm x 7,320 mm Weight: 9.5 Tonne Track Mounted Geothermal Drill Rig Location: Queensland, Australia Learn More

Make: Black Diamond Model: HJGW400 Year: 2023 Hours: 260 Engine: Cummins 4BTA Bean Pump: AD413, Max PSI: 550, Max RPM: 500, KW: 2.4, KPA: 3,792, HP: 3.2, GPM: 9, LPM: 34 Rod Bin: 80 m Mayhew Jr 3M Rods (Near New) Capability: 200M with 6” Hammer Hole Diameter: 110 - 305 mm Max Drilling Depth: 400 m Rotation Torque: 3,500 Nm Rotation Speed: 0-200 RPM Feeding Capacity: 100 Kn Feed Stroke: 200 Kn Drill Rod Length: 6 m Travel Speed: 2.5 km/h Dimensions (L x W x H - Transportation): 6,700 mm x 1,800 mm x 2,650 mm Dimensions (Working): 4,350 mm x 2,850 mm x 7,320 mm Weight: 9.5 Tonne Track Mounted Geothermal Drill Rig Location: Queensland, Australia Learn More

Rig Make: UDR Model: 1000 Hours: 270 (Since Engine Rebuild) Engine: Detroit GM 6V-71 (Completely Rebuilt) - Head Rebuilt, All New Selectors, Gear Train, Bearings and Upgraded to Splined Output Spindle and Shaft (17 Hours used since) - Genuine Sandvik Parts Used - Hydraulic Motor tested (when apart and in good condition) - No Cylinder leaks - Lots of Hoses replaced - Slight leak from Control Panel - Good gauges and spool valves - Hydraulic Tank repaired, cleaned, and new filters and new oil (12 hours ago) - Bean Pump has new fluid end and in good condition - Table Modified to accept 400 mm Casing and running 300 mm Square Slips Plate - Original UDR Table available - Rod Safety Cage Included Truck Make: International Model: Acco T2650 Engine: Cummins 350 Big Cam Transmission: 18 Speed Road Ranger Type: 8x4 - No Oil Leaks - Lots spent for Rego - Cab has minimal rust - Tyres New 3 years ago and done 7,000 km's since Truck Mounted Drill Rig Location: South Australia Learn More

Make: Mobile Drill Model: B37 Year: 2012 Refurbished Year: 2025 (Comprehensively Rebuilt & Upgraded) Hours: 1,830 Engine: John Deere 4045TF285 Diesel Engine @ 99 HP Feed Stroke: 4 Metres with 15,700 lb Retract Force Rod Pull: 6 Metres Haul/Wireline/Jib Winch: 8,500 lb Front Mounted Recovery Winch: 20,000 lb Track Base: Remote Controlled MT-20 with Engineered FOPS for operator safety Rebuild & Upgrade; - Traverse Assembly & Traverse Box replaced and upgraded - New Toa-Tone SP8000 Sonic Drill Head (Oscillation Head) - New Hydrovane Compressor - New Tracks for improved mobility and stability - Upgraded Spindle Attachment - Full Service Completed with regular servicing history maintained Includes; - Dump Mast - Triple Clamp with Make & Break - Auto SPT Hammer - Bean W1122D Pump - Caterpillar CAT 430 Injection Pump - 10 Speed Mobile Drill Head - 30 Metres Sonic Tooling (140 mm Casing / 115 m Barrel) - Spares + Consumables - Upgraded Sonic Tooling to Boart Longyear standard Track Mounted Sonic + Conventional Drill Rig Location: Queensland, Australia Learn More

Air Core Drill Rig - New Comp Rotation Head - Deck Engine - Main Feed Ram - Radiator Hydraulic Pump - Tilting Rod Bin - Onboard Air Compressor Hours: 100 Approx. Compressor Capacity: 600 CFM / 230 PSI - Cradle for Cyclone Pump points for Booster Bean Pump - Dump Mast - Has been water boring for the last 5 years - Too many spares to list Truck Make: Hino Model: GT Year: 2014 KM's: 64,000 Type: 4x4 Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Type: FMC1622 Bean Mud Pump Parts *For more information, contact us* Location: Queensland, Australia Learn More

Make: G&K Model: 850 Engine: Caterpillar CAT 3208 (Rebuilt) Hours: 200 approx. - Replaced Extensive Hydraulic Hoses - Bean Pump on deck - 72 Metres of 4" Inch Waterbore Drill Pipe, comes with Head Tubes and Air Swivel Lots of Spares; - 2x Spare Heads -2x Spare Winches -1x Spare Wireline Drilling Capacity; 12" Inch Hole: Approx. 200 + Metres NQ: 800 Metres HQ: 600 Metres Truck Mounted Waterbore / Diamond Drill Rig Location: Victoria, Australia Learn More

Rig Make: UDR Model: 650 Onboard Compressor: Sullair 1,150 CFM / 350 PSI Air Compressor - Set up for Waterbores, RC and Aircore - Table opens up to allow 14” inch casing or bit - Recent major service of Air End, Separator Filter & New Oil - New Head Slides - New Jib Ram - New Pull Down Ropes - Head Serviced Includes; - Cyclone & Splitter - New Bull Hose - 25x Used 4” Inch RC Rods with Inner Tubes - 2x Head Tubes - Air RC Swivel - Mud Rotary Swivel - Hydraulic Breakout Arm - 4” Inch Airdrill RC Hammer (in Good Condition) & 2x Hammer Tubes - 7x 5” Inch Hammer Bits (Used) - 1x 4” Inch Back Hammer - 1x 8” Inch Aircore Bit - 4” Inch Aircore Bits (2x New & 3x Used) - Blow Up Sub - 1x 4 ½” Inch PDC Bit - 6” Inch Casing Elevator Set - Diverter Box with 20x Rubbers - Stuffing Box - Rod Spanner to suit - Dig Out Sub Rig Truck Make: Volvo Year: 2012 - Twin Steer Option 1 – Water Bore Drilling Equipment (Additional $15,400 ex GST) - 12” Inch Blade Bit (Near New) - 7 7/8” Inch Blade Bit - 8” Inch Tri-Cone Med Formation (Near New) - 6” Inch Shreps Hammer with 6” Inch & 8” Inch Bits (New) - Adaptor Subs to suit - Rod Spanners to suit - Casing Elevators Option 2 – RC Rods (Additional $55,000 ex GST) - 180 Metres of RC 4” Inch Remet Rod String (New) Option 3 – Hooklift Truck + Bins ($55,000 ex GST) Truck Make: Isuzu Year: 2000 - Hooklift Truck Bins; 1st Bin: 6x5 Gardner Denver Mud Pump with Perkins Engine 2nd Bin: To carry PVC and Gravel 3rd Bin: To carry Water Suttles Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Rig Make: Mayhew Model: 1000 Hours: 16,000 Rig Truck Make: Mack Model: Quantum Year: 2005 KM's: 750,000 Includes; - Onboard Sullair 350/750 Air Compressor (Low Hour) - Onboard 5/4 Mud Pump - 4 Pot Bean Pump - GD 2000 Table - Mayhew 1000 Draw Works - 4 Long Stroke Jacks - All Powered off Truck Engine - All Variable Speed Hydraulic Drive - Isolators - Mine Spec - Excellent Tyres - Air Conditioning - 2 UHF Radio - Jump Start - E Stop - Isolators - Plastic Rollover Guards - Good Rubber Skirting Under Table - 2 Tool Boxes - Fire Extinguisher - All service records available - Rig has had extensive rebuilds every second year Support Truck Make: Volvo Model: FL10 Year: 1995 Includes; - Holds 6,500 L of Water - Jump Start, E Stop, Isolators - Ample Toolboxes, Storage - Slide Out Safety Rails - Storage on Top of Water Tank - Spare Tyre Tracks - All New Paint - New Drive Tyres, Steer Good Tyres - Certified ROPS - Air Conditioning - UHF Radios - Fire Extinguisher - Hydraulic Water Pump - Can hold 90 m 5" Inch PVC & Plenty of Rods Compressor Make: Sullair Model: 350/1100 or 500/900 Year: 2006 Hours: 2,000 - Computerised CAT C15 Manual Sullair Control System - Split Intercooler & Compressor Oil Cooler Mounting - Cabinet Braces - Receiver Bracing - Remote E Stop - Jump Start Receptacle - Isolators, Mine Spec - Connected to 4,000 L Diesel Fuel Tank underneath (Can pump diesel out of bulk tank) Truck Mounted Drill Rig & Support Truck Package Location: Queensland, Australia Learn More

Make: Schramm Model: T660 H Rotadrill Engine: Caterpillar CAT 3406B DITA @ 450 HP Pulldown: 30,000 lbs Pullback: 44,000 lbs Capacity: 5" Inch Rams / 350 m R/C 4 1/2" Inch Remet Rods Stroke: 6.5 m Top Drive: R/C Head Twin Motor 2 Speed / 0-160 RPM @ 38,000 lbs / 0-53 RPM @ 75,000 lbs Onboard Air Compressor: Sullair 900 CFM / 350 PSI Mounting: Caterpillar CAT 325 Wide Track Track Mounted Drill Rig Location: New Zealand Learn More

Drill Rig Make: Schramm Model: T685 Year: 2007 Engine: Cummins QSK19 Pullback Rating (Hoist Capacity): 33,884 kg Compressor: 2022 (Rebuild) Sullair DC 1,350 CFM / 500 PSI with Caterpillar C18 Compressor Hours: 3,200 (Shown) Triplex Pump: Bean 535 Pump Table Opening: 20" Inch Dual Breakouts: Metzke Hydraulic Breakout Tong Clutch: Direct Drive Set Up Rotation Head: Airdrill - Fold Down Walkways - Guarding (Spin cage with inter lock) - KL Road Loader (Hydraulic fixed) - 685WS Mast Truck Make: MAN Model: TGS 41.480 Year: 2008 KM's: 70,000 Transmission: Automatic Type: 8x8 - Mine Spec Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Rig Make: Hydrapower Model: Explorer 500 Year: 2007 Hours: 6,700 Engine: Cummins CPAK-6BTA Turbo After Cooled 6 Cylinder (176 HP @ 2,500 RPM) Rig Hydraulics; - Sauer Danfoss proportionally controlled control valves - Sauer closed loop pump on Rotary Drive Sauer open loop pump on auxiliary functions Rotary Drive; - Hydrapower Gearbox - Steel Casing with floating hollow spindle and hydraulic head lock and swing - Two Speed, 0 - 225 RPM & 0 - 966 RPM - Low speed torque to 4150 Nm - High speed torque to 966 Nm Head Travel: 6.8 m Main Winch; -Max. Pull: 4,200 kg -Max. Line Speed: 28 m/min Wireline Winch; Max. Pull: 780 kg Max. Line Speed: 83 m/min Pulldown; - Electrically controlled with dial for speed control Pull Down Capacity: 7000 kg Pull Out Capacity: 11,500 kg Mast; - Fitted with 2.0 m mast dump for angle drilling - Standard length is 10 m, supplied with hydraulically operated breakout spanner and top pulley swivel - Supplied with hydraulic circuit with quick-connect couplings for optional breakout table - Brakeout Table with Split Type Table - Bean Pump - 5x6 Gardner Denver Mud Pump (Hydraulic Driven) Truck Make: MAN Model: M2000 Year: 2005 KM's: 75,000 - Not registered - Some gearbox problems Truck Mounted Drill Rig Location: New South Wales, Australia Learn More

Make: DB Model: Traserscreen DB-40M Transport Length: 2,300 mm Transport Width: 1,520 mm Transport Height: 1,925 mm Weight: 500 kg Mobile Compact Sieve Screen Location: Slovakia Learn More

Make: DB Model: Traserscreen DB-15XL Transport Length: 2,310 mm Transport Width: 1,380 mm Transport Height: 1,657 mm Weight: 350 kg Mobile Compact Sieve Screen Location: Slovakia Learn More