Search results for: 'high for skid bottom mi'

Make: Gardner Denver Model: 8FXX172 Year: 1990 Skid Mounted Duplex Mud Pump Location: Queensland, Australia Learn More

Rig Make: EDM Model: 2000 Year: 2010 (2x) & 2012 Engine: Cummins QSM-11 Tier 3 Diesel Pullback: 40,000 Main Winch: 40,000 Max. Tophead Torque: 9,000 (800 Torque @ 1,500 RPM) - Set Up for Exploration Drilling (5-150 RPM Tophead in Low Gear) - Core Drilling Applications (150-1,500 RPM Tophead in High Gear) - No Air Compressor - No Mud Pump - FMC (Bean) Water Pump (140 l/min or 35 GPM) - Sliding Angle Mast (Up to 45 Degrees with 2,000 mm Mast Dump) - High Speed Wireline Winch for Coring - Hydraulic Rod Break Out - Rod Spinner with 11,000 Breakout Torque Quantity: 3 Approx. Drill Depths; Dual Tube RC Pipe: 350 m BQ Coring Pipe: 2,800 m NQ Coring Pipe: 2,000 m HQ Coring Pipe: 1,500 m PQ Coring Pipe: 1,100 m Rig Truck Make: International Model: 7601 (2010) / 7500 (2010) / 7600 (2012) Year: 2019 (2x) & 2012 Type: 8x4 Truck Mounted Drill Rig Location: Chile Learn More

Make: Geoprobe Model: 7822DT Year: 2025 Hours: 319 - Geoprobe GH63 Hammer - Tethered and Wireless Remote - 4 Speed Head (4,000 ft-lbf @ 750 RPM) - Dual Winch Kit - 3' Mast Extension - 7" Inch Breakout Kit - H Feed Control / CPT Valve Kit - 140 lbs Auto Drop Hammer - Anvil Hanger - ADH Drive Cap AWJ, Pin Down - 5' Extruder with Moyno 3L6 - Helper Side - 53" Inch Toolbox - Open Storage Box - Drop Rack System w/ Rod Rack - Yoke Vise & Mounting Bracket - High Speed Water Swivel w/ Float - Float Sub NWJ Pin Assembly Track Mounted Drill Rig Location: United States of America Learn More

Make: AFHTechFLOW Package Type: Gas Heating & Pressure Regulating Skid Application: Fuel gas conditioning for gas engine / generator Year: October 2014 Fluid: Natural Gas / Fuel Gas Typical End Use: GE Jenbacher Gas Generator Fuel Gas Train Electrical Supply: 415 V, 3-phase, 50 Hz Heater Power Load: ~11 kW Gas Inlet Connection: Flanged pipeline inlet Gas Outlet Connection: Flanged connection to engine gas train Drains: Heater vessel drain Relief: PSVs vented to atmosphere Earthing: Dedicated skid earth lug Nominal Gas Flow: 330 Nm³/hr Maximum Flow Rate: 330 Nm³/hr Inlet Pressure (Operating): 35 – 90 barg Inlet Pressure (Design / MAOP): 102 barg (upstream of regulator PRV2301) Outlet Pressure (Operating): 4 barg Inlet Temperature: 2 – 60 °C Outlet Temperature: 0 – 40 °C Design Temperature Range: -15 to +60 °C Gas Quality Assumption: Pipeline Quality Natural Gas Gas Heating System; - Electric gas heater, 10.8 kW - Explosion-protected heater suitable for Zone 1 - Carbon steel pressure vessel heater housing - 100 NB, Class 600 - Designed to AS 1210 PT100 RTD temperature elements; - Element sheath over-temperature protection - Heater outlet temperature control Thyristor-controlled heater system; - Control panel supplied separately for non-hazardous area installation - Heater pressure safety relief valve Pressure Control & Safety; - Primary pressure regulator (carbon steel body) - Over-pressure shut-off valve with fracture disk - Pressure safety relief valve (PSV) - Pressure gauges with block and bleed valves - Manual isolation ball valves (Class 800) Gas Filtration & Separation; - Cyclone separator for liquid droplet removal - Particle filter rated >3 µm - Designed to prevent condensate and solids entering engine gas train Fuel Gas Conditioning Skid Location: Queensland, Australia Learn More

Make: Sinocan Engineering Corp. Model: CSF500 Year: 2006 Engine: Detroit 60 Series 6063HV39 Performance at Max: 500 HP Input 165 SPM Skid Mounted Mud Pump Location: Western Australia Learn More

Make: Compressor Systems Australia Pty Ltd (CSI) Year: 2012 Vessel Type: Vertical Gas Coalescer Vessel Designed Service: Coal Seam Gas (CSG) Design Code: AS 1210:2010 Hazard Level: B (AS 4343) Registered Design Number: Q26409 - Does NOT INCLUDE Control System Module or Wiring Mechanical (Each Vessel); Internal Volume: 460 L Orientation: Vertical Shell Material: AS1548 PT460NR Head Material: AS1548 PT460 Corrosion Allowance: 3 mm PWHT: Nil Weight; Empty: ~550 kg Full: ~850 kg Pressure & Temperature; Design Pressure: –101.3 kPa to 1,000 kPa Maximum Operating Pressure: 930 kPa Hydrostatic Test Pressure: 1,500 kPa Design Temperature: –10 °C to + 85 °C MDMT: –31 °C Maximum Operating Temperature: 50 °C Internals; - Replaceable coalescing filter elements (micron rating TBC) - Bottom liquid sump with drain connection - Top removable head for element access Total Installed Coalescing Volume: ~920 L Pressure Regulation; Make: Fisher (Emerson) Model: Big Joe® Type 630 Function: Downstream pressure control following coalescing Maximum Differential Pressure: 250 PSIG Casing Pressure: As per manufacturer nameplate Instrumentation; Level / Condensate Monitoring: Rosemount Transmitter Tag: BB76-LIT-700034B - Instrumentation associated with condensate collection and drain system - High-pressure rated instrument chamber Configuration & Key Features; - Parallel twin-vessel (A/B) arrangement - Individual isolation valves per coalescer - Common inlet and outlet headers Designed for: - High-availability CSG operations - Online maintenance - Reduced pressure drop - Protection of downstream compression, metering, and pipelines Asset Classification; Twin Coal Seam Gas (CSG) Coalescer Vessel and Pressure Regulation Skid AS 1210 Pressure Equipment – Hazard Level B Skid Assembly; Overall Dimensions (Approx.): 8.4 m (L) × 2.5 m (W) × 3.8 m (H) - Structural steel skid, gal with grated deck - Integrated access ladder and elevated maintenance platform - Painted carbon steel pipework - Outdoor-rated for field installation Twin Gas Coalescer & Pressure Regulation Skid Location: Queensland, Australia Learn More

Model: 600X Engine: John Deere Tier 4F - Stage V - Model: 4045CI550 @ 173 HP Pull Down Force: 7,000 kg Retract Force: 10,000 kg Feed Down Speed: 0-23 m/min Feed Retract Speed: 0-13.5 m/min Feed Stroke: 2.1 m Mast Dumping: 950 mm Rod Rack Capacity: 100 ft AWJ + 100 ft NQ Auger Rack Capacity: 50 ft of 3 1/4" Inch Hollowed Augers Features; - Engine Leveler - Engine Controller Unit - Pulling/Carrier Winch - 3x Night Lights - 2x Mud Pumps; Progressive Cavity Pump & Piston Pump - High Capacity Winch & Wireline Winch - Double Rod Clamp Breakout System - Automatic SPT Hammer - 16 Speed Rotation Head - Driller Platform - Toolbox Optional Features; - 4x Camera CCTV System - DSE Power Unit Parameters - Drilling Parameters - JD (John Deere) Link Track Mounted Multipurpose Hydraulic Drill Rig Location: United Arab Emirates Learn More

Make: Gardner Denver Model: 1FXX 172 - Mounted on Trailer Skid Mounted Mud Pump Location: Western Australia Learn More

Make: Sullair Model: 900XHH / 1150XH Year: 2018 Hours: 6,100 Engine: Tier 4 - DEF Cleaning at 5,500 hours Skid Mounted Air Compressor Location: South Korea Learn More

Make: Doosan Model: G100 Year: 2023 Engine: Cummins F3.8 with 82 kW Generator: Stamford AGC250 - Diesel Powered with 100 kVA and 80 kW - Included Socket Combination according to DGUV - FI type B (2x CEE-16A-230V, 1x CEE-32A-400V, 1x CEE-63A-400V - FI type B and 1x CEE-125A-400V - FI type A) - Closed Bottom Environmental Tub - Digital Programmable Dashboard including 50/60 Hz Switching - Standard 176 Litre Tank for 11 Hours Operation - Auto Start/Stop with Customer Signal for Start & Stop - Ground Spike with Cable Quantity: 10 Portable Generators Location: Germany Learn More

Make: Atlas Copco Model: E-Air V1100 VSD Year: 2020 Hours: 2,405 Skid Mounted Air Compressor Location: Queensland, Australia Learn More

Make/Model: DE881 Engine: Cummins QSL9 Inline 6 Cylinder Tier 3 Depth Capacity (Coring): 2,223 m (7,291 ft) N Size Depth Capacity (Reverse Circulation): 450 m (1,470 ft) in Size Feed Force: 11.4 Tonne (25,350 lbf) Pull Force: 23 Tonne (50,700 lbf) Feed Length (Stroke): 7.32 m Speed Up: 65.4 m/min Speed Down: 49 m/min Features; - DA555 Diamond/RC Rod Handler - Hands Free Breakout Tool - FOPS Fitted over the Control Panel - Jaws for N, H & P Size Rod Handler and Rod Clamps - Starter Rods included for N, H & P Sizes - Rotating Rod Guard with Interlock - Front Mount Diesel Engine - Sophisticated Microfeed System - Water/Mud Pump - Water Swivel - Acoustic Enclosure on Engine - Powerful Top Drive Rotation Unit - Self-Energizing Rod Clamp - 1x Rod Clamp to support B, N, H, P & S Rod Sizes; 44.5 to 177.8 mm - Auxiliary Hydraulic Outlets - Multiple Guarding - Onboard Rod Storage - Remote Wedge Interlock Kit - Deck Mounted Wireline Winch - Wireline Counter / Cleaner / Overrun Cut Out - Left-Hand Hydraulic Operated Walkway with Stairs - Fluid Catch Tray (Under Engine) - High Pressure Filter Kit - Hose Sleeving on High Risk Hoses - Airline Oiler + Options Drill Rig Location: TBA (New Build - Built to Order) Learn More

Make/Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Features; - Radio Remote Tramming with No Driver Compartment - FOPS Fitted over Control Panel - Rotating Rod Guard with Interlock - "P" Size Rotation Unit with Chuck Drive and Hollow Spindle - Stepless Rotation Speed Control - Pilot Hydraulic Controls - Self-Propelled Drill Unit - 1x Rod Clamp to support B, N, H, P & S Rod Sizes; 44.5 to 177.8 mm - Fits in a high cube 40' Foot closed Shipping Container - Hydraulically Operated Left-Hand and Right-Hand Walkways - Tier 3 or Stage 5 / Tier 4 Diesel Engine Models Available - Wireline Spooler - Fire Suppression System - Main Winch Travel Limiter - Safety Spin capable of making up and breaking out of Rod Joints during tripping operations + Options Track Mounted Drill Rig Location: TBA (New Build - Built to Order) Learn More

Make: MPI Model: NF500 Year: 2024 Hours: 11 - Triplex - Oversize transmission cooler fitted to radiator support - All high pressure piping, Cameron Gauges, PRV’s, etc. have test certificates - Pulsation Dampener has design registration certificates - Transmission has lock indicators visible to the operator - Transmission has over temp alarms and lights, and “quick to neutral” to further protect the transmission - Dual post battery isolators and starter isolators - Test certificates and register for the hydraulic hosing for the self- loading legs Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn More

Make: MPI Model: NF500 Year: 2024 Hours: 26 - Triplex - Oversize transmission cooler fitted to radiator support - All high pressure piping, Cameron Gauges, PRV’s, etc. have test certificates - Pulsation Dampener has design registration certificates - Transmission has lock indicators visible to the operator - Transmission has over temp alarms and lights, and “quick to neutral” to further protect the transmission - Dual post battery isolators and starter isolators - Test certificates and register for the hydraulic hosing for the self- loading legs Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn More

Make: FMC Model: L1122D Engine: Yanmar 4TNV Rated Pressure: 1,000 PSI Design Flowrate: 50 US GPM - Linde Hydraulic Pump (Coupled to the Diesel via Adaptor) - Linde Hydraulic Motor (Driving FMC Pump) - Flexible coupling between Pump and Hydraulic Motor (Comes with Guard) - Oil Cooler (Comes with Cooling Oil Tank) - Boart Longyear Pressure Relief Valve (Adjustable) - Rated up to 1,100 PSI - Hydac 1 Litre Bladder Accumulator - Maquarrie Control Panel - Structural Steel Base with Lifting Eyes - Battery Skid Mounted Mud Pump Location: New South Wales, Australia Learn More

Make: FMC Model: L1122D Engine: Yanmar 4TNV Rated Pressure: 1,000 PSI Design Flowrate: 50 US GPM - Linde Hydraulic Pump (Coupled to the Diesel via Adaptor) - Linde Hydraulic Motor (Driving FMC Pump) - Flexible coupling between Pump and Hydraulic Motor (Comes with Guard) - Oil Cooler (Comes with Cooling Oil Tank) - Boart Longyear Pressure Relief Valve (Adjustable) - Rated up to 1,100 PSI - Hydac 1 Litre Bladder Accumulator - Maquarrie Control Panel - Structural Steel Base with Lifting Eyes - Battery Skid Mounted Mud Pump Location: New South Wales, Australia Learn More

Hours: 20,182 Type: 5x6 - Diesel Driven Skid Mounted Mud Pump Location: Western Australia Learn More

Make: Gardner Denver Model: 1PE172 Hours: 9,736 - Diesel Driven Skid Mounted Mud Pump Location: Western Australia Learn More

Model: DAC150 Year: 2022 Hours: 1,211 Engine: Caterpillar CAT 3406 Track Base: Morooka 2500 (Stripped & Rebuilt - Subframe and Chassis extended and Track Frame moved central to machine) - Tilt/Dump Rod Bin (Holds 40x 3 Metre Rods - 120 Metres) - Sullair 1150/350 Air Compressor - Airdrill Rotation Head - Bottom Mount Air Swivel - Automatic Blow Down - Sand Cyclone with Revolving Splitter - RC Cyclone with Cone Splitter - Hydraulic Fold Down Walkway with Pull Out Ladder - Pedal Operated Air Spanner - Hydraulic Breakouts Track Mounted Drill Rig Location: New South Wales, Australia Learn More