Search results for: 'hole for seri clermont cooler'
- Did you mean
- hire for seri clermont cooler
- Related search terms
- forks revers r poa 2024 for sale
- hole for sale in carry hire nj
- hole for sale new hire pennsylvania
- hole for sale in cargo hire nj
- hole for sale in cherry hire nj
-
Edson 350 Drill Rig Mounted on 1975 Toyota 75 Series Landcruiser ($125,000 ex GST) (sale-ehub4359)For Sale$125,000.00Rig Make: Edson Model: 350 Hours: 4,500 Air Compressor: Compair/Broomwade (Plate No: C20450/206) - 25x Rods @ 2,050 mm long - 1x with Downhole 75 mm Hammer attached - 2x 75 mm Button Bits for Hammer and numerous Drag Bits included - 3x Bog Mats for Stabiliser Legs - 2-3x Rods have worn threads that would need re-machining/built up Vehicle Make: Toyota Model: 75 Series Landcruiser Year: 1975 Vehicle Mounted Drill Rig Location: Victoria, Australia Learn MoreMachine hours 4,500
KILOMETERS N/A YEAR 1975
BRAND Edson
LOCATION Victoria, Australia
MODEL 350
-
2017 Epiroc Boomer S1D Drill Rig (POA) (sale-ehub4355)For HireMake: Epiroc Model: Boomer S1D Year: 2017 Hours: 3,171 / 315 (Percussion Hours) Engine: Deutz B4L914 @ 72.4 KW Rock Drill: Sandvik HLX5 Transmission: Rexroth A4VG56 Feed Beam: Adapted with Feed Chain - Electric Motor and Compressor - Electrical Cabinet (A10) - Electrical Collector - Cooler - Hydraulic Control Block - ROPS Operator Cabin Drill Rig Location: Chile Learn MoreMachine hours 3,171
KILOMETERS N/A YEAR N/A BRAND Epiroc
LOCATION Chile
MODEL Boomer S1D
-
2012 Schramm AD400AC Track Mounted Drill Rig (POA) (sale-ehub4342)For Sale$0.00Make: Schramm Model: AD400AC Year: 2012 Hours: 20,600 Mast Top Head Travel: 4.7 m Mast Slide (Dump): 2.38 m Pullback Capacity: 13,607 kg (30,000 lb) - Rod Loader with 120 Metre Capacity of 3.5" Inch x 3 Metre RC Rods (Rods Not Included) - FMC EO413 Water Injection Pump (82 LPM @ 48 Bar / Max Pressure: 103 Bar) - Rotary Head (0-146 RPM / 6,022 Nm (4,442 ft lb) - 800 Litre Fuel Tank - 1,000 Litre Water Tank Refurbishments; - All Hydraulic Pumps fully reconditioned (Only have less than 4,000 hours) - Compressor fully reconditioned (Less than 4,000 hours) - Complete Mast changed (Less than 4,000 hours) - Engine & Hydraulic Cooler (Less than 4,000 hours) - CAT 3406 Engine (10,600 hours) Fully Reconditioned & In stock, can arrange to fit to rig for extra - Sullair Air Compressor 20/12 H 1,150 CFM / 1,800 RPM to 1,350 CFM / 1,800 RPM (Max Discharge Pressure: 500 PSI @ 1,150 CFM & 350 PSI @ 1,350 CFM) - Fully Reconditioned (Little less than 8,000 hours) Track Mounted Drill Rig Location: New Caledonia Learn MoreMachine hours 20,600
KILOMETERS N/A YEAR 2012
BRAND Schramm
LOCATION New Caledonia
MODEL AD400AC
-
2006 CSF500 Skid Mounted Mud Pump ($250,000 ex GST) (sale-ehub4332)For Sale$250,000.00Make: Sinocan Engineering Corp. Model: CSF500 Year: 2006 Engine: Detroit 60 Series 6063HV39 Performance at Max: 500 HP Input 165 SPM Skid Mounted Mud Pump Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2006
BRAND N/A
LOCATION Western Australia
MODEL CSF500
-
2017 Isuzu NQR Series Service Truck ($92,500 ex GST) (sale-ehub4323)For Sale$92,500.00Make: Isuzu Model: NQR Series Year: 2017 KM's: 137,385 - Rego & RWC on sale Service Truck Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS 137,385
YEAR 2017
BRAND Isuzu
LOCATION Queensland, Australia
MODEL NQR Series
-
2020 Epiroc SmartROC D65 MKII-10LF Track Mounted Blasthole Drill Rig (POA) (sale-ehub4308)For Sale$0.00Make: Epiroc Model: SmartROC D65 MKII-10LF Year: 2020 Hours: 1,501 Net Power: 541 HP Max. Hole Depth: 56 m Hole Diameter: Up to 229 m (9" Inch) COP M7 Hammer Drilling Method: Down-The-Hole (DTH) Track Mounted Blasthole Drill Rig Location: Peru Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Epiroc
LOCATION Peru
MODEL SmartROC D65 MKII-10LF
-
1998 Caterpillar CAT 994 Wheel Loader (POA) (sale-ehub4296)For Sale$0.00Make: Caterpillar Model: 994 Year: 1998 Hours: 17,577 Serial Number: 9YF00226 - Field Follow Unit for D Series Items Done to Machine; - Replaced Turbo and 1x Injector - Replaced Oil Coolers - Rebuilt Water Pump - Replaced All Wiring Harness KA21045 - Replaced Turbo - Rods & Main Bearings - Rebuilt Pump Drive & Replaced Engine Mounts - Installed New Mufflers & Repaired Starter Wheel Loader Location: United States of America Learn MoreMachine hours 17,577
KILOMETERS N/A YEAR 1998
BRAND Caterpillar CAT
LOCATION United States of America
MODEL 994
-
2019 Epiroc SpeedROC 3F Surface Drill Rig Mounted on 2018 Doosan DX 210 W Carrier (POA) (sale-ehub4270)For Sale$0.00Rig Make: Epiroc Model: SpeedROC 3F Year: 2019 Hole Diameter: 28 mm - 45 mm Max. Hole Depth: 9 Metre Air Capacity (FAD): 42.5 l/s Pressure: 8 Bar Rock Drill / DTH Hammer Size: COP DS5 Drilling Method: Tophammer Carrier Make: Doosan Model: DX 210 W Year: 2018 Hours: 1,600 Carrier Mounted Surface Drill Rig Location: Germany Learn MoreMachine hours 1,600
KILOMETERS N/A YEAR 2019
BRAND Epiroc
LOCATION Germany
MODEL SpeedROC 3F
-
2023 Black Diamond HJGW400 Track Mounted Geothermal Drill Rig (FOR HIRE/RENT - POA) (hire-ehub4258)For HireMake: Black Diamond Model: HJGW400 Year: 2023 Hours: 260 Engine: Cummins 4BTA Bean Pump: AD413, Max PSI: 550, Max RPM: 500, KW: 2.4, KPA: 3,792, HP: 3.2, GPM: 9, LPM: 34 Rod Bin: 80 m Mayhew Jr 3M Rods (Near New) Capability: 200M with 6” Hammer Hole Diameter: 110 - 305 mm Max Drilling Depth: 400 m Rotation Torque: 3,500 Nm Rotation Speed: 0-200 RPM Feeding Capacity: 100 Kn Feed Stroke: 200 Kn Drill Rod Length: 6 m Travel Speed: 2.5 km/h Dimensions (L x W x H - Transportation): 6,700 mm x 1,800 mm x 2,650 mm Dimensions (Working): 4,350 mm x 2,850 mm x 7,320 mm Weight: 9.5 Tonne Track Mounted Geothermal Drill Rig Location: Queensland, Australia Learn MoreMachine hours 260
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL Black Diamond HJGW400
-
2023 Black Diamond HJGW400 Track Mounted Geothermal Drill Rig ($145,000 ex GST) (sale-ehub4258)For Sale$145,000.00Make: Black Diamond Model: HJGW400 Year: 2023 Hours: 260 Engine: Cummins 4BTA Bean Pump: AD413, Max PSI: 550, Max RPM: 500, KW: 2.4, KPA: 3,792, HP: 3.2, GPM: 9, LPM: 34 Rod Bin: 80 m Mayhew Jr 3M Rods (Near New) Capability: 200M with 6” Hammer Hole Diameter: 110 - 305 mm Max Drilling Depth: 400 m Rotation Torque: 3,500 Nm Rotation Speed: 0-200 RPM Feeding Capacity: 100 Kn Feed Stroke: 200 Kn Drill Rod Length: 6 m Travel Speed: 2.5 km/h Dimensions (L x W x H - Transportation): 6,700 mm x 1,800 mm x 2,650 mm Dimensions (Working): 4,350 mm x 2,850 mm x 7,320 mm Weight: 9.5 Tonne Track Mounted Geothermal Drill Rig Location: Queensland, Australia Learn MoreMachine hours 260
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL Black Diamond HJGW400
-
2024 MPI NF500 Triplex Hydraulic Jack Up Mud Pump ($1,392,000 ex GST) (sale-ehub4256)For Sale$1,392,000.00Make: MPI Model: NF500 Year: 2024 Hours: 11 - Triplex - Oversize transmission cooler fitted to radiator support - All high pressure piping, Cameron Gauges, PRV’s, etc. have test certificates - Pulsation Dampener has design registration certificates - Transmission has lock indicators visible to the operator - Transmission has over temp alarms and lights, and “quick to neutral” to further protect the transmission - Dual post battery isolators and starter isolators - Test certificates and register for the hydraulic hosing for the self- loading legs Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn MoreMachine hours 11
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL MPI NF500
-
2024 MPI NF500 Triplex Hydraulic Jack Up Mud Pump ($1,392,000 ex GST) (sale-ehub4255)For Sale$1,392,000.00Make: MPI Model: NF500 Year: 2024 Hours: 26 - Triplex - Oversize transmission cooler fitted to radiator support - All high pressure piping, Cameron Gauges, PRV’s, etc. have test certificates - Pulsation Dampener has design registration certificates - Transmission has lock indicators visible to the operator - Transmission has over temp alarms and lights, and “quick to neutral” to further protect the transmission - Dual post battery isolators and starter isolators - Test certificates and register for the hydraulic hosing for the self- loading legs Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn MoreMachine hours 26
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL MPI NF500
-
FMC L1122D Hydraulic Skid Mounted Mud Pump (FOR HIRE/RENT - POA) (hire-ehub4250)For HireMake: FMC Model: L1122D Engine: Yanmar 4TNV Rated Pressure: 1,000 PSI Design Flowrate: 50 US GPM - Linde Hydraulic Pump (Coupled to the Diesel via Adaptor) - Linde Hydraulic Motor (Driving FMC Pump) - Flexible coupling between Pump and Hydraulic Motor (Comes with Guard) - Oil Cooler (Comes with Cooling Oil Tank) - Boart Longyear Pressure Relief Valve (Adjustable) - Rated up to 1,100 PSI - Hydac 1 Litre Bladder Accumulator - Maquarrie Control Panel - Structural Steel Base with Lifting Eyes - Battery Skid Mounted Mud Pump Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND FMC
LOCATION New South Wales, Australia
MODEL L1122D
-
FMC L1122D Hydraulic Skid Mounted Mud Pump ($67,500 ex GST) (sale-ehub4250)For Sale$67,500.00Make: FMC Model: L1122D Engine: Yanmar 4TNV Rated Pressure: 1,000 PSI Design Flowrate: 50 US GPM - Linde Hydraulic Pump (Coupled to the Diesel via Adaptor) - Linde Hydraulic Motor (Driving FMC Pump) - Flexible coupling between Pump and Hydraulic Motor (Comes with Guard) - Oil Cooler (Comes with Cooling Oil Tank) - Boart Longyear Pressure Relief Valve (Adjustable) - Rated up to 1,100 PSI - Hydac 1 Litre Bladder Accumulator - Maquarrie Control Panel - Structural Steel Base with Lifting Eyes - Battery Skid Mounted Mud Pump Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND FMC
LOCATION New South Wales, Australia
MODEL L1122D
-
DHD380 / T45 / T51 Hammer Rock Drill Bits (POA) (sale-ehub4248)For Sale$0.00Drill Bits; Model: DHD380 Size: 8" Inch / 9" Inch / 10" Inch - T45 & T51 - 85 mm to 135 mm - Includes some Shank Adaptors and Couplings, etc. Quantity: Approx. 200 Shank Adaptors; Make: Sandvik Model: HL1000T45 / HL1000T51 - Third Shank but size unknown; 3" Inch Blast Hole Bits Hammer Rock Drill Bits Location: Northern Territory, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Northern Territory, Australia
MODEL DHD380
-
1994 Edson CP-Tiga Series Drill Rig Mounted on 2000 Toyota Landcruiser 79 Series Ute ($55,000 ex GST) (sale-ehub4246)For Sale$55,000.00Rig Make: Edson Model: CP-Tiga Series Year: 1994 - Repair History since 2021 available - Off Road from November 2022 to October 2025 for repairs (Rear Diff) - Serviced and Ready - Aluminium Traction Tracks/Ramps - Mounted Auger & Drill Bit - Spare Auger Extensions (Plain) - 1x 1.5 Metre Concrete Cutting Drill Bit - 1x 1.0 Metre Concrete Cutting Drill Bit - Rock Drilling Bit - Soil Sampler - Other Spare Parts & Fittings Vehicle Make: Toyota Landcruiser Model: 79 Series Year: 2000 KM's: 443,920 - Spare Tyre - Spare Brake Drums (Need to be machined) Ute Mounted Drill Rig Location: Victoria, Australia Learn MoreMachine hours N/A KILOMETERS 443,920
YEAR 1994
BRAND Edson
LOCATION Victoria, Australia
MODEL CP-Tiga Series
-
2007 V-Pack Cooler (POA) (sale-ehub4236)For Sale$0.00Year: 2007 V-Pack Cooler Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL V-Pack
-
1994 Hino FD/GT3H Series 4x4 Cab Chassis Fuel Truck (POA) (sale-ehub4230)For Sale$0.00Make: Hino Model: FD/GT3H Series Year: 1994 Type: 4x4 - Fuel/Diesel Tanks Cab Chassis Truck Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 1994
BRAND Hino
LOCATION Western Australia
MODEL FD/GT3H Series
-
Weir MHD-100HV Highwall Pump Unit (POA) (sale-ehub4198)For Sale$0.00Make: Weir Minerals Model: MHD-100HV Rated RPM: 186 kW @ 2,200 RPM Suction Diameter: 150 mm Discharge Diameter: 200 mm Suction Flange: 406 OD x 200 ID 8 Holes 21 Dia. On 356 PCD Discharge Flange: 368 OD x 150 ID 8 Holes 21 Dia. On 324 PCD - Hydraulic Powered Highwall Pump Unit Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL MHD-100HV
-
Weir MHD-100HV Highwall Pump Unit (FOR HIRE/RENT - POA) (hire-ehub4198)For HireMake: Weir Minerals Model: MHD-100HV Rated RPM: 186 kW @ 2,200 RPM Suction Diameter: 150 mm Discharge Diameter: 200 mm Suction Flange: 406 OD x 200 ID 8 Holes 21 Dia. On 356 PCD Discharge Flange: 368 OD x 150 ID 8 Holes 21 Dia. On 324 PCD - Hydraulic Powered Highwall Pump Unit Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL MHD-100HV
Filter