Search results for: 'size per rang hole ll'
- Did you mean
- size per rang hire ll
- sale per rang hole ll
- Related search terms
- hole to enabl 10,000 hz and adaptive size
- hole to enabl 1,000 hz and adaptive size
- hole to enabl 14,000 hz and adaptive singl
- hole to enabl 118 hz and adaptive sale
- hole to enabl 14 hz and adaptive sale
-
2013 Soilmec SM-5 Track Mounted Drill Rig ($231,000 ex GST) (sale-ehub4613)For Sale$231,000.00Make: Soilmec Model: SM-5 Year: 2013 Hours: 260.5 Engine: 2011 Deutz TCD L04W (Tier 3) Standard Feed Stroke: 1,400 mm Max Hoist (Pullback): 51 kN (5,100 daN) Max Feed Force: 40 kN (4,000 daN) Rotary Head Torque Range: 690 daNm Rotary Speed: 98 Hydraulic Clamp & Breaker Range: 50 mm to 220 mm Diameter Clamping / Breaking Force: 140 kN Clamping / 3,000 daNm Breaking Torque Service Winch Pull: 6 kN (600 daN) - 2.4 Metre Mast + Mast Extension (1 Metre) - Extra Chain - Built in Pressure Washer Track Mounted Drill Rig Location: Australia Learn MoreMachine hours 260.5
KILOMETERS N/A YEAR 2013
BRAND Soilmec
LOCATION Australia
MODEL SM-5
-
NW1000 Man Portable Surface Coring Drill Rig (POA) (sale-ehub4605)For Sale$0.00Make: NW Model: 1000 Engine 1: Hatz 4H50 @ 85 HP (Tier 3) Engine 2: Hatz 4H50 @ 85 HP (Tier 3) Control Panel: CP1005 Rated: 1,000 m on NWL - Can drill holes from -45 to -90 Degrees - Supports up to PWL Drill Rods - All Drill Functions & Controls now located on the Driller Control Panel - Engine Start/Stop and Monitoring located at the Control Panel - Excellent Fuel Conservation with 2x Engines that Ramp with the system defined hydraulic load monitored and controlled - Optional Rod Breaking System available Man Portable Surface Coring Drill Rig Location: Canada Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND NW
LOCATION Canada
MODEL 1000
-
2010 Kemtron KTCP25-6514-PKBD-040 Mud Cleaning / Recycling Hydraulic Jack Up Unit ($335,000 ex GST) (sale-ehub4600)For Sale$335,000.00Make: Kemtron Model: KTCP25-6514-PKBD-040 Year: 2010 Pump Size: 5x6x14 IMP Dia: 10" Inch Serial: 250-0553 Mud Cleaning / Recycling Hydraulic Jack Up Unit Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2010
BRAND Kemtron
LOCATION Queensland, Australia
MODEL KTCP25-6514-PKBD-040
-
800 kVA 0.400/6.6 kV ONAN Aluminium Wound Transformer (FOR HIRE/RENT - POA) (hire-ehub4646)For HireTapping Range: -5% to +5% in 2.5% step (Off Load Tap Changer on HV Side) Windings: Aluminium HV / LV Bushings: Cable Box from sides Ambient Temp: 45 degrees C Type of Cooling: ONAN Vector Group: Dyn11 Number of Phase: 3 Impedance: Approx. 5% Input / Output Frequency: 50 Hz - 800 kVA 0.400/6.6 kV Transformer Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL N/A
-
Lay Flat Hose Reel (FOR HIRE/RENT - POA) (hire-ehub4625)For HireSingle Spool Capacity: Up to 150 m Length - 1,000 m Ø reels - Pallet sized for easy transport - Modular for stacking and storage Lay Flat Hose Reel Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL N/A
-
DE-1000 FHD Skid Mounted Centrifuge (FOR HIRE/RENT - POA) (hire-ehub4623)For HireModel: DE-1000 FHD Diameter: 14" Inch (356 mm) Bowl Type: Contour Cylinder Speed Range: 0-4,000 RPM (Max G's: 3,180) Flow Rate: 200 GPM with Water System: Counter Current Dimensions: 2,921 mm x 1,905 mm x 1,448 mm Weight: 4,050 kg Skid Mounted Centrifuge Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL DE-1000 FHD
-
HD4800 Mud Cleaning Drilling Fluid System (FOR HIRE/RENT - POA) (hire-ehub4619)For HireModel: HD4800 Average Operating Capacity: 1,000 - 1,200 GPM Includes; - 8x Shaker Skids (4x2 Shakers per skid) with desilter/desander - 4x Agitator Mixing Tanks with 2x Pumps - 4x Recycle Tanks with Mission Magnum Centrifugal Pumps and Valves per tank - 2x Pump Skids with 4x Mission Magnum Centrifugal Pumps and Valves per unit Mud Cleaning Drilling Fluid System Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL HD4800
-
825 kVA Generator (FOR HIRE/RENT - POA) (hire-ehub4616)For HireFuel Consumption: 128 Litres (per hour) Dimensions: 5,800 mm x 2,250 mm x 2,580 mm Weight: 11,300 kg - 825 kVA - Diesel Fuelled - Without Fuel Tank Generator Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL N/A
-
7 1/16" Inch BOP (POA) (sale-ehub4562)For Sale$0.00Size: 7 1/16" Inch Rated Working Pressure: 5,000 PSI Hydr OS Rated Working Pressure: 1,500 PSI Serial Number: A14-436 BOP Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL 7 1/16" Inch BOP
-
Bauer UBW 08 S Track Mounted Blast Hole Drill Rig ($30,000 ex GST) (sale-ehub4512)For Sale$30,000.00Make: Bauer Model: UBW 08 S Engine: Deutz 4 Cylinder Serial Number: 201877 Slide Stroke: 3.7 Metres Rotary Torque: 12.6 kNm Operating Weight: 11 Tonne - Starts & Runs - Needs love on a few hoses, tracks tight but can move and should free up - 82 kW (Approx. 110 HP) Track Mounted Blast Hole Drill Rig Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Bauer
LOCATION New South Wales, Australia
MODEL UBW 08 S
-
50HS-C HSC Slurry Centrifugal Mud Pump ($4,850 ex GST) (sale-ehub4506)For Sale$4,850.00Model: 50HS-C Discharge Size: 50 mm (2" Inch) Inlet Size: 75 mm (3" Inch) Capacity: 70 m3/h (308 GPM) Head: 50 m (72.5 PSI) Max. Efficiency: 55% NPSH: 4~6 m Allowable Mating Max. Power: 30 KW Base Type: C Particle Size: 25 mm RPM: 2,500 - Configured with Electric Motor but can be changed to run with a Hydraulic Motor with base included HSC Slurry Centrifugal Mud Pump Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL 50HS-C
-
15" Inch Hole Opener Hammer Bits + SD12 Shank (Open to Offers) (sale-ehub4503)For Sale$0.00- SD12 Shank - 15" Inch Hole Opener Hammer Bits Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL SD12 / 15" Inch
-
2016 Can-Am Commander DPS 800R Utility Terrain Vehicle (POA) (sale-ehub4486)For Sale$0.00Make: Can-Am Model: Commander DPS 800R Year: 2016 KM's: 5,470 Engine: 800R Rotax V-Twin, CVT with High/Low Range and Sport Mode - Dynamic Power Steering (DPS) - Front Winch and Bull Bar - Tow Hitch with Ball Fitted - Tipping Rear Tray (100 kg Tailgate Rating) - Maxxis Bighorn Tyres on Alloys with Good Tread All Round - Full Roll Cage with Side Nets - Cosmetic wear consistent with farm/yard use - Some surface rust on exhaust and hitch, panels have marks and scuffs - No Rego (Off-Road Use) Utility Terrain Vehicle Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS 5,470
YEAR 2016
BRAND Can-Am
LOCATION Queensland, Australia
MODEL Commander DPS 800R
-
2x CMQ Engineering Skid Mounted Filter Press (POA) (sale-ehub4480)For Sale$0.00Make: CMQ Engineering - 47 Plates: 0.007467 m3 per plate Total Solid Cake Volume per Cycle: 0.35 m3 Total Dry Weight: 16 Tonnes Transport Dimensions; Length: 12.19 m Width: 3.18 m Height: 3.54 m - 40' Foot Container Frame with ISO Container Locks - Heavy Duty Structural Steel Frame with Integrated Lifting Points Quantity: 2 (1x Lightly Used & 1x New) Skid Mounted Filter Press Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL Filter Press
-
Fraste Make/Break Teeth Jaw Inserts (POA) (sale-ehub4476)For Sale$0.00Make: Fraste Size: 95 x 45 x 18 Make/Break Teeth Jaw Inserts Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Fraste
LOCATION New South Wales, Australia
MODEL 95 x 45 x 18
-
Geoprobe Alt 210065A Make/Break Teeth Jaw Inserts (POA) (sale-ehub4475)For Sale$0.00Make: Geoprobe Part Number: 210065A Size: 100 x 56 x 17.6 Make/Break Teeth Jaw Inserts Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Geoprobe Systems
LOCATION New South Wales, Australia
MODEL 100 x 56 x 17.6 / 210065A
-
Geoprobe 210065 Make/Break Teeth Jaw Inserts (POA) (sale-ehub4474)For Sale$0.00Make: Geoprobe Part Number: 210065 Size: 100 x 56 x 17.6 Make/Break Teeth Jaw Inserts Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Geoprobe Systems
LOCATION New South Wales, Australia
MODEL 100 x 56 x 17.6 / 210065
-
Comacchio Small Make/Break Teeth Jaw Inserts (POA) (sale-ehub4473)For Sale$0.00Make: Comacchio Size: 77 x 38 x 16 (Small) Make/Break Teeth Jaw Inserts Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Comacchio
LOCATION New South Wales, Australia
MODEL 77 x 38 x 16 (Small)
-
Comacchio Medium Make/Break Teeth Jaw Inserts (POA) (sale-ehub4472)For Sale$0.00Make: Comacchio Size: 77 x 51 x 16 (Medium) Make/Break Teeth Jaw Inserts Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Comacchio
LOCATION New South Wales, Australia
MODEL 77 x 51 x 16 (Medium)
-
Comacchio 7-7006.001 Large Make/Break Teeth Jaw Inserts (POA) (sale-ehub4471)For Sale$0.00Make: Comacchio Size: 100 x 70.6 x 15 (Large) Part Number: 7-7006.001 Make/Break Teeth Jaw Inserts Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Comacchio
LOCATION New South Wales, Australia
MODEL 7-7006.001
Filter