Search results for: 'size rods high for seri'

Deck: 6.2 Metre - Radio Controlled - Full Remote Operation with Manual Override - Certificate provided on application - In-Built Counterbalance Valves - Mine Site Spec'd including Fire Extinguisher, Hydraulic Hose Sleeving and E-Stops - Battery & Key Isolation Optional Extras; - Handrails - Container Locks - Deck Length Extension which includes Storage Area Hydraulic Jack Up Rod Sloop Location: Queensland, Australia Learn More

Make: Regan Torus Size: 7 1/6" Inch 3K PSI: 1,500 / 3,000 Annular BOP Location: Queensland, Australia Learn More

Model: Single Ram PSI: 3,000 Bore Size: 11" Inch Temp Class: T-20/250 Dimensions: 82.5" x 29.8" x 22.6" Weight: 3,813 lb Blowout Preventer BOP Location: Queensland, Australia Learn More

Make: Sandvik Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Track Mounted Drill Rig Location: Queensland, Australia Learn More

Rig Make: Edson Model: 350 Hours: 4,500 Air Compressor: Compair/Broomwade (Plate No: C20450/206) - 25x Rods @ 2,050 mm long - 1x with Downhole 75 mm Hammer attached - 2x 75 mm Button Bits for Hammer and numerous Drag Bits included - 3x Bog Mats for Stabiliser Legs - 2-3x Rods have worn threads that would need re-machining/built up Vehicle Make: Toyota Model: 75 Series Landcruiser Year: 1975 Vehicle Mounted Drill Rig Location: Victoria, Australia Learn More

Make: Rockdrill Model: RD700 Hours: 33,037 - Mounted on Modified Caterpillar Log Skidder - Recently Replaced Skidder Turbo - Deutz 6 Cylinder Turbocharged Power Pack - 2x Brand New Hydraulic Pumps & 1x Used - Onboard Sullair 500 CFM / 350 PSI Air Compressor with Caterpillar CAT 3208 Engine (Hours: 4,924) - 150x Metres of RC Rods - 4x Hammers inc. 1x Open Water Bore Hammer and Blade Bits - Several Pallets of Spare Parts, Consumables, and Spare Tyre - Blade on Front for ease of Track/Pad Set Up - Hasn't been operated in 2 years but has since deteriorated a few hoses and ram seals from sitting - Emergency Stop System needs work - Started every 4 months to keep oil around internals but needs work before job - Not Registered Modified Log Skidder Drill Rig Location: Queensland, Australia Learn More

Includes; - 7x NMLC Bit and Reamers - 3x NMLC Bits - 2x NMLC TC Core Bit - 1x HMLC Used Bit and Reamer - 1x HMLC New S15 Core Bit - 1x HMLC New Reamer - 1x HMLC Used Core Bit - 1x Tri Cone 2 15/16" Inch - 1x Tri Cone 3 7/8" Inch - 1x HQ3 Bit Reamer Fordia S11/14 - 5x HQ3 Used IMP Bits - 2x HQ3 TC Core Bits - 1x PQ3 Near New IMP Core Bit - 1x C4 IMP Bit and Reamer - 1x NW IMP Shoe Bit - 1x NW TC Shoe Bit - 1x HQ Rod TC Shoe Bit - 2x NQ3 Near New IMP Core Bits - 3x NQ Reamers - 1x NQ Rod Reamer - 1x NQ New IMP Core Bit Hayden S14/15 - 1x HQ New Reamer - 1x HQ Near New Reamer - 1x New 3 7/8" Inch Drag Bit - 2x Near New 4 1/2" Inch Drag Bit - 1x NMLC New Hard Core S6 - 1x NMLC New Reamer - 1x NQ3 Hard Core S15 - 9x 2 Metre Used RC Rods - 1x Used 1.5 Metre RC Rod with Bit - 4x Worn Augers - 1x Used 4 1/2" Inch Bit - 1x New 4 1/2" Inch Bit - 1x 6 1/2" Inch Drag Bit - 1x 100 mm Tube Adapter - 1x 75 mm Tube Adapter - 2x 50 mm Tube Adapter Plus 50 mm Piston Sampler Drilling Consumables Package Location: Queensland, Australia Learn More

Rig Make: EDM Model: 2000 Year: 2010 (2x) & 2012 Engine: Cummins QSM-11 Tier 3 Diesel Pullback: 40,000 Main Winch: 40,000 Max. Tophead Torque: 9,000 (800 Torque @ 1,500 RPM) - Set Up for Exploration Drilling (5-150 RPM Tophead in Low Gear) - Core Drilling Applications (150-1,500 RPM Tophead in High Gear) - No Air Compressor - No Mud Pump - FMC (Bean) Water Pump (140 l/min or 35 GPM) - Sliding Angle Mast (Up to 45 Degrees with 2,000 mm Mast Dump) - High Speed Wireline Winch for Coring - Hydraulic Rod Break Out - Rod Spinner with 11,000 Breakout Torque Quantity: 3 Approx. Drill Depths; Dual Tube RC Pipe: 350 m BQ Coring Pipe: 2,800 m NQ Coring Pipe: 2,000 m HQ Coring Pipe: 1,500 m PQ Coring Pipe: 1,100 m Rig Truck Make: International Model: 7601 (2010) / 7500 (2010) / 7600 (2012) Year: 2019 (2x) & 2012 Type: 8x4 Truck Mounted Drill Rig Location: Chile Learn More

Make: Exploration Drill Masters EDM Model: 95K Year: 2018 Hours: 32,431 Drill Head Hours: 32,431 Compressor Hours: 32,431 Onboard Air Pack: Sullair 1,150 CFM / 500 PSI Air Compressor - Spare Parts available (can provide a detailed list with pricing) - EDM MK2 Core Rod Feeder (For additional $USD350,000) Track Mounted Drill Rig Location: United States of America Learn More

Make: Geoprobe Model: 7822DT Year: 2025 Hours: 319 - Geoprobe GH63 Hammer - Tethered and Wireless Remote - 4 Speed Head (4,000 ft-lbf @ 750 RPM) - Dual Winch Kit - 3' Mast Extension - 7" Inch Breakout Kit - H Feed Control / CPT Valve Kit - 140 lbs Auto Drop Hammer - Anvil Hanger - ADH Drive Cap AWJ, Pin Down - 5' Extruder with Moyno 3L6 - Helper Side - 53" Inch Toolbox - Open Storage Box - Drop Rack System w/ Rod Rack - Yoke Vise & Mounting Bracket - High Speed Water Swivel w/ Float - Float Sub NWJ Pin Assembly Track Mounted Drill Rig Location: United States of America Learn More

Make: Schramm Model: AD400AC Year: 2012 Hours: 20,600 Mast Top Head Travel: 4.7 m Mast Slide (Dump): 2.38 m Pullback Capacity: 13,607 kg (30,000 lb) - Rod Loader with 120 Metre Capacity of 3.5" Inch x 3 Metre RC Rods - FMC EO413 Water Injection Pump (82 LPM @ 48 Bar / Max Pressure: 103 Bar) - Rotary Head (0-146 RPM / 6,022 Nm (4,442 ft lb) - 800 Litre Fuel Tank - 1,000 Litre Water Tank Refurbishments; - All Hydraulic Pumps fully reconditioned (Only have less than 4,000 hours) - Compressor fully reconditioned (Less than 4,000 hours) - Complete Mast changed (Less than 4,000 hours) - Engine & Hydraulic Cooler (Less than 4,000 hours) - CAT 3406 Engine (10,600 hours) Fully Reconditioned & In stock, can arrange to fit to rig for extra - Sullair Air Compressor 20/12 H 1,150 CFM / 1,800 RPM to 1,350 CFM / 1,800 RPM (Max Discharge Pressure: 500 PSI @ 1,150 CFM & 350 PSI @ 1,350 CFM) - Fully Reconditioned (Little less than 8,000 hours) Track Mounted Drill Rig Location: New Caledonia Learn More

Make: Foremost Type: 4 1/2" Inch Connector Tube Pipe (CTP) - Reverse Circulation OD: 4 1/2" Inch x 3 1/4" Inch ID (Approx.): 3 1/4" Inch (without inner tubes) - Currently has "BAD" Steel Inner Tubes Installed (Inner Tubes can be removed by pressing; with PIN down and push out BOX end) Quantity: 140 Drill Pipe / Rod Location: United States of America Learn More

Rig Make: Schramm Model: T660 Rotadrill Year: 1984 Hours: 4,131 Air Compressor: GHH 750 CFM / 250 PSI @ 2,100 RPM Deck Engine: Detroit 8V92 Diesel Winch Pullback: 44,000 lbs - Caterpillar Water Injection System - Set Up as Top Head Air Rotary - 7 Rod Carousel - Hammer Oiler Truck Make: Brigadier Engine: Caterpillar 3208 Miles: 41,546 Transmission: 13 Speed GVW: 53,320 lbs FVW: 15,320 lbs RVW: 38,000 lbs Drill Pipe; - 4 1/2" Inch - 220' Foot Bottle Neck Truck Mounted Drill Rig Location: United States of America Learn More

Make: Sinocan Engineering Corp. Model: CSF500 Year: 2006 Engine: Detroit 60 Series 6063HV39 Performance at Max: 500 HP Input 165 SPM Skid Mounted Mud Pump Location: Western Australia Learn More

Make: Compressor Systems Australia Pty Ltd (CSI) Year: 2012 Vessel Type: Vertical Gas Coalescer Vessel Designed Service: Coal Seam Gas (CSG) Design Code: AS 1210:2010 Hazard Level: B (AS 4343) Registered Design Number: Q26409 - Does NOT INCLUDE Control System Module or Wiring Mechanical (Each Vessel); Internal Volume: 460 L Orientation: Vertical Shell Material: AS1548 PT460NR Head Material: AS1548 PT460 Corrosion Allowance: 3 mm PWHT: Nil Weight; Empty: ~550 kg Full: ~850 kg Pressure & Temperature; Design Pressure: –101.3 kPa to 1,000 kPa Maximum Operating Pressure: 930 kPa Hydrostatic Test Pressure: 1,500 kPa Design Temperature: –10 °C to + 85 °C MDMT: –31 °C Maximum Operating Temperature: 50 °C Internals; - Replaceable coalescing filter elements (micron rating TBC) - Bottom liquid sump with drain connection - Top removable head for element access Total Installed Coalescing Volume: ~920 L Pressure Regulation; Make: Fisher (Emerson) Model: Big Joe® Type 630 Function: Downstream pressure control following coalescing Maximum Differential Pressure: 250 PSIG Casing Pressure: As per manufacturer nameplate Instrumentation; Level / Condensate Monitoring: Rosemount Transmitter Tag: BB76-LIT-700034B - Instrumentation associated with condensate collection and drain system - High-pressure rated instrument chamber Configuration & Key Features; - Parallel twin-vessel (A/B) arrangement - Individual isolation valves per coalescer - Common inlet and outlet headers Designed for: - High-availability CSG operations - Online maintenance - Reduced pressure drop - Protection of downstream compression, metering, and pipelines Asset Classification; Twin Coal Seam Gas (CSG) Coalescer Vessel and Pressure Regulation Skid AS 1210 Pressure Equipment – Hazard Level B Skid Assembly; Overall Dimensions (Approx.): 8.4 m (L) × 2.5 m (W) × 3.8 m (H) - Structural steel skid, gal with grated deck - Integrated access ladder and elevated maintenance platform - Painted carbon steel pipework - Outdoor-rated for field installation Twin Gas Coalescer & Pressure Regulation Skid Location: Queensland, Australia Learn More

Make: Sandvik - Unused/Still in Crane Rod Handler Location: New South Wales, Australia Learn More

Model: 600X Engine: John Deere Tier 4F - Stage V - Model: 4045CI550 @ 173 HP Pull Down Force: 7,000 kg Retract Force: 10,000 kg Feed Down Speed: 0-23 m/min Feed Retract Speed: 0-13.5 m/min Feed Stroke: 2.1 m Mast Dumping: 950 mm Rod Rack Capacity: 100 ft AWJ + 100 ft NQ Auger Rack Capacity: 50 ft of 3 1/4" Inch Hollowed Augers Features; - Engine Leveler - Engine Controller Unit - Pulling/Carrier Winch - 3x Night Lights - 2x Mud Pumps; Progressive Cavity Pump & Piston Pump - High Capacity Winch & Wireline Winch - Double Rod Clamp Breakout System - Automatic SPT Hammer - 16 Speed Rotation Head - Driller Platform - Toolbox Optional Features; - 4x Camera CCTV System - DSE Power Unit Parameters - Drilling Parameters - JD (John Deere) Link Track Mounted Multipurpose Hydraulic Drill Rig Location: United Arab Emirates Learn More

Make: Isuzu Model: NQR Series Year: 2017 KM's: 137,385 - Rego & RWC on sale Service Truck Location: Queensland, Australia Learn More

Make: Reichdrill Model: 650 Year: Mid 1990 Engine: Caterpillar CAT 3406C Diesel Dimensions; Length: 42' Width: 13'.4" Height: 14'.6" Weight: 70,000 lbs - 4 Rod Carousel - Sullair 900 CFM / 350 PSI Air Compressor - Can be mounted on a truck Track Mounted Drill Rig Location: United States of America Learn More

Make/Model: DE740 Engine: Cummins QSB6.7 Inline 6 Cylinder Tier 3 Depth Capacity; TK56: 3.187 m B: 2.350 m TK66: 2.731 m N: 2 m TK76: 1.886 m H: 1.4 m P: 831 m Feed Force: 6.8 Tonne (15,000 lbf) Pull Force: 13.6 Tonne (30,000 lbf) Feed Length (Stroke): 3.45 m Speed Up & Down: 30 m/min Features; - "P" Size Chuck Drive C40 Rotation Head with Hollow Spindle and Stepless Speed Control - Telescoping Upper Mast - All Hydraulically Operated - Self-Propelled Drill Unit - Rod Spin Guard - 1x Rod Clamp can support; B, N, H, P and S Rod Sizes; 44.5 mm to 177.8 mm - Head Traverse System directly coupled to Rotation Head Carriage - Wireline Wiper and Safety Cut Out + Options Drill Rig Location: TBA (New Build - Built to Order) Learn More