Search results for: 'wheel to load for reel for stage'

Make: Scooptram Model: ST1030 Year: 2008 Wheel Loader Location: Chile Learn More

Make: Caterpillar Model: R1700 Year: 2013 Frame Hours: 40,000 (Complete Rebuild at 30,000) Wheel Loader Location: Chile Learn More

Make: Caterpillar Model: 993K Part Number / Serial Number: MRX0293 / Z9K00477 - To suit Caterpillar CAT 993K Wheel Loader Transmission Location: West Africa Learn More

Make: Caterpillar Model: R2900G Components; Front Axle - Part Numbers: 394-2401 / 203-1867 / 186-8810 Back Axle - Part Number: 222-2643 Transmission - Part Number: 175-2635 Torque Converter - Part Numbers: 186-8779 / 186-8782 Pump - Part Number: 421-9093 Main Pump - Part Number: 175-0008 Wheel Loader Components / Parts Location: West Africa Learn More

Drill Rig Make: Thor Year: 2007 Hours: 1,905 Air Compressor: 600 CFM / 350 PSI Max. Diameter Depth: 130 mm Max. Aircore Depth: 150 mm Wheel Base: MB 6x6 Drill Angles: 55 to 90 degrees - 3 Axle SPV (No Load Over Axle Mass Limits) Rig Truck Make: Mercedes Benz Model: Actros 3341A Year: 2006 Engine: 54194500455057 VIN: WDB9301832L123007 Type: 6x6 GVM: 33,000 kg Support Truck Make: Tatra Year: 2007 Engine Number: T3C92881608002752 VIN: TNU28PR257KO42431 Water Capacity: 2,500 Litres Fuel Capacity: 4,500 Litres - 3 Axle Rigid Vehicle (No Trailer over 4.5 Tonne Gross) Pig Trailer Make: Park Body Builders Year: 2008 VIN: 6T9T23WA18017E011 - 1 Axle Trailer / Semi-Trailer Truck Mounted Drill Rig Water & Fuel Support Truck Location: Western Australia Learn More

Model: VB10 Engine: Deutz TCD2012L04 4 Cylinder Working Pressure: Max. 350 Bar Torque (Inside Rods): 3,700 / 7,400 Speed: 120 / 60 RPM Torque (Outside Rods): 12,000 / 24,000 Speed: 54 / 27 RPM Max. Breaking Torque: 46,000 Nm Drill Pole; Pole Profile: 300 x 200 x 8 mm Pole Height: 7,190 mm Stroke: 3,600 mm Hook Load / Pulling Force (Chain): 120 kN / 245 kN Max. Contact Pressure (Chain): 60 kN Travelling Speed: Up to 40 m/min Max. Rod Length: 2 m Track Mounted Dual Rotary Drill Rig Location: Western Australia Learn More

Make: Epiroc Model: Scooptram ST14 Year: 2022 Hours: 6,493 Serial Number: TMG22URE0603 Wheel Loader Location: Chile Learn More

Make: Norton Clipper Model: 70184693006 BBL350 3 Phase Cutting Length: 500 mm Bore Maximum Cutting Depth: 125 mm Blade: 500 mm x 25.4 mm Maximum Material Height: 355 mm - 4.0kW / 415 Volt - Stay level blade guard - Conveyor cart with non-slip rubber and tilt lock wheels - Water return channels - Fully protected blade support shaft - Crank controlled cutting depth adjustment and head locking device - Accurate and stable cut - Dry and clean area improving users comfort - Users safety and bearings protection - Shock-free cutting, good pressure control for better cutting quality - Accurate cutting depth adjustment and straight through cutting Economical Block Saw Location: Western Australia Learn More

Make: Caterpillar Model: R1700G Year: 2008 Hours: 3,500 - Never Rebuilt - Parked Inside for last 10 years - Fully Operable & In Working Condition Wheel Loader Location: Canada Learn More

Make: Caterpillar Model: R1600G Year: 2011 Hours: 32,413 Serial Number: CATR1600G9YZ00729 Wheel Loader Location: Canada Learn More

Make: Caterpillar Model: R1600G Year: 2010 Hours: 28,385 Serial Number: CATR1600G9YZ00599 Wheel Loader Location: Canada Learn More

Make: Caterpillar Model: R1600G Year: 2011 Hours: 30,963 Serial Number: CATR1600G9YZ00662 Wheel Loader Location: Canada Learn More

Make: Caterpillar Model: 994F Hours (Frame): 80,693 Hours (Engine): 19,769 Serial Number: 994FV44200214 Wheel Loader Location: United States of America Learn More

Make: Caterpillar CAT Model: R1600H Year: 2017 Hours: 20,530 Engine: Caterpillar CAT C11 Acert Tier 2 EPA - Tyres with 60% of Life - Bucket in Good Condition LHD Wheel Loader Location: Peru Learn More

Make: AFHTechFLOW Package Type: Gas Heating & Pressure Regulating Skid Application: Fuel gas conditioning for gas engine / generator Year: October 2014 Fluid: Natural Gas / Fuel Gas Typical End Use: GE Jenbacher Gas Generator Fuel Gas Train Electrical Supply: 415 V, 3-phase, 50 Hz Heater Power Load: ~11 kW Gas Inlet Connection: Flanged pipeline inlet Gas Outlet Connection: Flanged connection to engine gas train Drains: Heater vessel drain Relief: PSVs vented to atmosphere Earthing: Dedicated skid earth lug Nominal Gas Flow: 330 Nm³/hr Maximum Flow Rate: 330 Nm³/hr Inlet Pressure (Operating): 35 – 90 barg Inlet Pressure (Design / MAOP): 102 barg (upstream of regulator PRV2301) Outlet Pressure (Operating): 4 barg Inlet Temperature: 2 – 60 °C Outlet Temperature: 0 – 40 °C Design Temperature Range: -15 to +60 °C Gas Quality Assumption: Pipeline Quality Natural Gas Gas Heating System; - Electric gas heater, 10.8 kW - Explosion-protected heater suitable for Zone 1 - Carbon steel pressure vessel heater housing - 100 NB, Class 600 - Designed to AS 1210 PT100 RTD temperature elements; - Element sheath over-temperature protection - Heater outlet temperature control Thyristor-controlled heater system; - Control panel supplied separately for non-hazardous area installation - Heater pressure safety relief valve Pressure Control & Safety; - Primary pressure regulator (carbon steel body) - Over-pressure shut-off valve with fracture disk - Pressure safety relief valve (PSV) - Pressure gauges with block and bleed valves - Manual isolation ball valves (Class 800) Gas Filtration & Separation; - Cyclone separator for liquid droplet removal - Particle filter rated >3 µm - Designed to prevent condensate and solids entering engine gas train Fuel Gas Conditioning Skid Location: Queensland, Australia Learn More

Model: 600X Engine: John Deere Tier 4F - Stage V - Model: 4045CI550 @ 173 HP Pull Down Force: 7,000 kg Retract Force: 10,000 kg Feed Down Speed: 0-23 m/min Feed Retract Speed: 0-13.5 m/min Feed Stroke: 2.1 m Mast Dumping: 950 mm Rod Rack Capacity: 100 ft AWJ + 100 ft NQ Auger Rack Capacity: 50 ft of 3 1/4" Inch Hollowed Augers Features; - Engine Leveler - Engine Controller Unit - Pulling/Carrier Winch - 3x Night Lights - 2x Mud Pumps; Progressive Cavity Pump & Piston Pump - High Capacity Winch & Wireline Winch - Double Rod Clamp Breakout System - Automatic SPT Hammer - 16 Speed Rotation Head - Driller Platform - Toolbox Optional Features; - 4x Camera CCTV System - DSE Power Unit Parameters - Drilling Parameters - JD (John Deere) Link Track Mounted Multipurpose Hydraulic Drill Rig Location: United Arab Emirates Learn More

Make: Caterpillar Model: 745 Year: 2019 Hours: 7,200 Tank: Klein K900 Tank *New* - 2x Front Spray - 4x Rear Spray - Smart Spray - Gravity Dump - Rear Push Block - Plumbed Water Cannon and Hose Reel Articulated Dump Truck Water Tank Location: United States of America Learn More

Make: Caterpillar Model: 994 Year: 1998 Hours: 17,577 Serial Number: 9YF00226 - Field Follow Unit for D Series Items Done to Machine; - Replaced Turbo and 1x Injector - Replaced Oil Coolers - Rebuilt Water Pump - Replaced All Wiring Harness KA21045 - Replaced Turbo - Rods & Main Bearings - Rebuilt Pump Drive & Replaced Engine Mounts - Installed New Mufflers & Repaired Starter Wheel Loader Location: United States of America Learn More

Make/Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Features; - Radio Remote Tramming with No Driver Compartment - FOPS Fitted over Control Panel - Rotating Rod Guard with Interlock - "P" Size Rotation Unit with Chuck Drive and Hollow Spindle - Stepless Rotation Speed Control - Pilot Hydraulic Controls - Self-Propelled Drill Unit - 1x Rod Clamp to support B, N, H, P & S Rod Sizes; 44.5 to 177.8 mm - Fits in a high cube 40' Foot closed Shipping Container - Hydraulically Operated Left-Hand and Right-Hand Walkways - Tier 3 or Stage 5 / Tier 4 Diesel Engine Models Available - Wireline Spooler - Fire Suppression System - Main Winch Travel Limiter - Safety Spin capable of making up and breaking out of Rod Joints during tripping operations + Options Track Mounted Drill Rig Location: TBA (New Build - Built to Order) Learn More

Make: MPI Model: NF500 Year: 2024 Hours: 11 - Triplex - Oversize transmission cooler fitted to radiator support - All high pressure piping, Cameron Gauges, PRV’s, etc. have test certificates - Pulsation Dampener has design registration certificates - Transmission has lock indicators visible to the operator - Transmission has over temp alarms and lights, and “quick to neutral” to further protect the transmission - Dual post battery isolators and starter isolators - Test certificates and register for the hydraulic hosing for the self- loading legs Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn More