Search results for: 'blade gener high for size'

- BOP Hoses - 2 3/8" Inch Inside BOP - 2 7/8" Inch Inside BOP - Choke Manifold - 2 3/8" Inch Kelly Clock - 2 7/8" Inch Kelly Clock - 2 3/8" Inch IBOP - 2 7/8" Inch IBOP - Koomey - Poor Boy Degasser - Test Stump - 7 1/16" Inch 3,000 PSI BOP Pipe Rams - 7 1/16" Inch BOP Blind Rams - Pipe Ram Blocks for 7 1/16" Inch BOP Variable also 3 1/2" Inch & 4 1/2" Inch Blind Ram Blocks for 7 1/16" Inch BOP - 7 1/16" Inch BOP Annular Preventer - 3 Station Sized to run BOP Stack above BOP Actuator - 1x Set of Hydraulic Hoses to connect Actuator with BOP Stack - 2 1/16" Inch 3,000 PSI Manual Operated HCR Valve - 3x 2 1/16" Inch 3,000 PSI Manual Operated Shut Off Valve - 7 1/16" Inch 3,000 PSI with 2 1/16" Inch Side Outlets Drilling Spool - 2 Channel 3,000 PSI 2 1/16" Inch Choke Manifold - 2x 6 Metre + 3,000 PSI 2 1/16" Inch Connect to HCR and Choke Flexible Choke Line - 2x BOP Starter Flange to suit Lower Drilling Spool to make up onto PWT - 3x Sets of all seal rings needed for coupling up the BOP Stack BOP Equipment Package Location: New South Wales, Australia Learn More

Make: VersaDrill Model: KmN1.4sm Year: 2022 Hours: 3,500 Depth Capacity: N Size @ 2,294 m (7,526 ft) Rotary Head Ratio: 1:2,33 Speed: 0 to 1,250 RPM Spindle Interior Dimension: 124 mm (4.9" Inches) Hydraulic Motor: 160 CC Variable Track Mounted Core Drill Rig Location: United States of America Learn More

Make: Norton Clipper Model: 70184693006 BBL350 3 Phase Cutting Length: 500 mm Bore Maximum Cutting Depth: 125 mm Blade: 500 mm x 25.4 mm Maximum Material Height: 355 mm - 4.0kW / 415 Volt - Stay level blade guard - Conveyor cart with non-slip rubber and tilt lock wheels - Water return channels - Fully protected blade support shaft - Crank controlled cutting depth adjustment and head locking device - Accurate and stable cut - Dry and clean area improving users comfort - Users safety and bearings protection - Shock-free cutting, good pressure control for better cutting quality - Accurate cutting depth adjustment and straight through cutting Economical Block Saw Location: Western Australia Learn More

Model: Bowen Size: 118 Gearench PUVTH: 118 BO Petol Push Up Visetong Location: Western Australia Learn More

Make: Gardner Denver Model: 200-FXX-001 Type: 5x8 - High Pressure - Fully Refurbished Skid Mounted Mud Pump Location: Queensland, Australia Learn More

Make: Regan Torus Size: 7 1/6" Inch 3K PSI: 1,500 / 3,000 Annular BOP Location: Queensland, Australia Learn More

Model: Single Ram PSI: 3,000 Bore Size: 11" Inch Temp Class: T-20/250 Dimensions: 82.5" x 29.8" x 22.6" Weight: 3,813 lb Blowout Preventer BOP Location: Queensland, Australia Learn More

Make: Sandvik Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Track Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Caterpillar Model: D9 Hours: Approx. 1,300 Engine: Caterpillar C18 @ 477 HP Track Shoes: 610 mm Track Rollers: 8 + 8 (Both Sides) - SS Ripper - SU Single Tilt Blade - Air Conditioned Cabin Track Mounted Crawler Bulldozer Location: India Learn More

Make: Komatsu Model: D475A-5E0 Year: 2023 Hours: 6,075 - Needs Plates and Sprockets - Complete with Blade and SS Ripper Track Mounted Crawler Bulldozer Location: Middle East Learn More

Make: Geoprobe Model: 7822DT Year: 2025 Hours: 319 - Geoprobe GH63 Hammer - Tethered and Wireless Remote - 4 Speed Head (4,000 ft-lbf @ 750 RPM) - Dual Winch Kit - 3' Mast Extension - 7" Inch Breakout Kit - H Feed Control / CPT Valve Kit - 140 lbs Auto Drop Hammer - Anvil Hanger - ADH Drive Cap AWJ, Pin Down - 5' Extruder with Moyno 3L6 - Helper Side - 53" Inch Toolbox - Open Storage Box - Drop Rack System w/ Rod Rack - Yoke Vise & Mounting Bracket - High Speed Water Swivel w/ Float - Float Sub NWJ Pin Assembly Track Mounted Drill Rig Location: United States of America Learn More

Make: AFHTechFLOW Package Type: Gas Heating & Pressure Regulating Skid Application: Fuel gas conditioning for gas engine / generator Year: October 2014 Fluid: Natural Gas / Fuel Gas Typical End Use: GE Jenbacher Gas Generator Fuel Gas Train Electrical Supply: 415 V, 3-phase, 50 Hz Heater Power Load: ~11 kW Gas Inlet Connection: Flanged pipeline inlet Gas Outlet Connection: Flanged connection to engine gas train Drains: Heater vessel drain Relief: PSVs vented to atmosphere Earthing: Dedicated skid earth lug Nominal Gas Flow: 330 Nm³/hr Maximum Flow Rate: 330 Nm³/hr Inlet Pressure (Operating): 35 – 90 barg Inlet Pressure (Design / MAOP): 102 barg (upstream of regulator PRV2301) Outlet Pressure (Operating): 4 barg Inlet Temperature: 2 – 60 °C Outlet Temperature: 0 – 40 °C Design Temperature Range: -15 to +60 °C Gas Quality Assumption: Pipeline Quality Natural Gas Gas Heating System; - Electric gas heater, 10.8 kW - Explosion-protected heater suitable for Zone 1 - Carbon steel pressure vessel heater housing - 100 NB, Class 600 - Designed to AS 1210 PT100 RTD temperature elements; - Element sheath over-temperature protection - Heater outlet temperature control Thyristor-controlled heater system; - Control panel supplied separately for non-hazardous area installation - Heater pressure safety relief valve Pressure Control & Safety; - Primary pressure regulator (carbon steel body) - Over-pressure shut-off valve with fracture disk - Pressure safety relief valve (PSV) - Pressure gauges with block and bleed valves - Manual isolation ball valves (Class 800) Gas Filtration & Separation; - Cyclone separator for liquid droplet removal - Particle filter rated >3 µm - Designed to prevent condensate and solids entering engine gas train Fuel Gas Conditioning Skid Location: Queensland, Australia Learn More

Make: Komatsu Model: D375A-6R Year: 2025 Hours: 0 - SU Blade - SS Ripper - ROPS - FOBS - Air Conditioned Cab Track Mounted Crawler Bulldozer Location: Egypt Learn More

Make: Compressor Systems Australia Pty Ltd (CSI) Year: 2012 Vessel Type: Vertical Gas Coalescer Vessel Designed Service: Coal Seam Gas (CSG) Design Code: AS 1210:2010 Hazard Level: B (AS 4343) Registered Design Number: Q26409 - Does NOT INCLUDE Control System Module or Wiring Mechanical (Each Vessel); Internal Volume: 460 L Orientation: Vertical Shell Material: AS1548 PT460NR Head Material: AS1548 PT460 Corrosion Allowance: 3 mm PWHT: Nil Weight; Empty: ~550 kg Full: ~850 kg Pressure & Temperature; Design Pressure: –101.3 kPa to 1,000 kPa Maximum Operating Pressure: 930 kPa Hydrostatic Test Pressure: 1,500 kPa Design Temperature: –10 °C to + 85 °C MDMT: –31 °C Maximum Operating Temperature: 50 °C Internals; - Replaceable coalescing filter elements (micron rating TBC) - Bottom liquid sump with drain connection - Top removable head for element access Total Installed Coalescing Volume: ~920 L Pressure Regulation; Make: Fisher (Emerson) Model: Big Joe® Type 630 Function: Downstream pressure control following coalescing Maximum Differential Pressure: 250 PSIG Casing Pressure: As per manufacturer nameplate Instrumentation; Level / Condensate Monitoring: Rosemount Transmitter Tag: BB76-LIT-700034B - Instrumentation associated with condensate collection and drain system - High-pressure rated instrument chamber Configuration & Key Features; - Parallel twin-vessel (A/B) arrangement - Individual isolation valves per coalescer - Common inlet and outlet headers Designed for: - High-availability CSG operations - Online maintenance - Reduced pressure drop - Protection of downstream compression, metering, and pipelines Asset Classification; Twin Coal Seam Gas (CSG) Coalescer Vessel and Pressure Regulation Skid AS 1210 Pressure Equipment – Hazard Level B Skid Assembly; Overall Dimensions (Approx.): 8.4 m (L) × 2.5 m (W) × 3.8 m (H) - Structural steel skid, gal with grated deck - Integrated access ladder and elevated maintenance platform - Painted carbon steel pipework - Outdoor-rated for field installation Twin Gas Coalescer & Pressure Regulation Skid Location: Queensland, Australia Learn More

Model: 600X Engine: John Deere Tier 4F - Stage V - Model: 4045CI550 @ 173 HP Pull Down Force: 7,000 kg Retract Force: 10,000 kg Feed Down Speed: 0-23 m/min Feed Retract Speed: 0-13.5 m/min Feed Stroke: 2.1 m Mast Dumping: 950 mm Rod Rack Capacity: 100 ft AWJ + 100 ft NQ Auger Rack Capacity: 50 ft of 3 1/4" Inch Hollowed Augers Features; - Engine Leveler - Engine Controller Unit - Pulling/Carrier Winch - 3x Night Lights - 2x Mud Pumps; Progressive Cavity Pump & Piston Pump - High Capacity Winch & Wireline Winch - Double Rod Clamp Breakout System - Automatic SPT Hammer - 16 Speed Rotation Head - Driller Platform - Toolbox Optional Features; - 4x Camera CCTV System - DSE Power Unit Parameters - Drilling Parameters - JD (John Deere) Link Track Mounted Multipurpose Hydraulic Drill Rig Location: United Arab Emirates Learn More

Make/Model: DE740 Engine: Cummins QSB6.7 Inline 6 Cylinder Tier 3 Depth Capacity; TK56: 3.187 m B: 2.350 m TK66: 2.731 m N: 2 m TK76: 1.886 m H: 1.4 m P: 831 m Feed Force: 6.8 Tonne (15,000 lbf) Pull Force: 13.6 Tonne (30,000 lbf) Feed Length (Stroke): 3.45 m Speed Up & Down: 30 m/min Features; - "P" Size Chuck Drive C40 Rotation Head with Hollow Spindle and Stepless Speed Control - Telescoping Upper Mast - All Hydraulically Operated - Self-Propelled Drill Unit - Rod Spin Guard - 1x Rod Clamp can support; B, N, H, P and S Rod Sizes; 44.5 mm to 177.8 mm - Head Traverse System directly coupled to Rotation Head Carriage - Wireline Wiper and Safety Cut Out + Options Drill Rig Location: TBA (New Build - Built to Order) Learn More

Make: Komatsu Model: D65WX-16 Year: 2011 Hours: 10,770 - Enclosed Air Conditioned Cab - 6 Way PAT Blade - Service History Track Mounted Crawler Dozer Location: Queensland, Australia Learn More

Make: Komatsu Model: D375A-6 Hours: 8,800 Year: 2019 - Strong Undercarriage - Auto Ladder - SS Ripper - U-Blade with Twin Tilts Track Mounted Crawler Dozer Location: United States of America Learn More

Air Compressor Make: Atlas Copco Model: XRVS 606CD ASME Hours: 4,132 Engine: Caterpillar C18 Horsepower: 575 429 kW 1,350 CFM Booster Make: Hurricane Model: 6T-276-42B Hours: 3,954 Engine: Caterpillar C7 Horsepower: 250 186.5 kW Mist Pump Make: KERR Model: KP3300 Hours: 1,495 Plunger Size: 1.75 Transmission: Eaton FS 5406A Engine: Deutz BF4L914 Horsepower: 97 72.4 kW Trailer Make: Wade Year: 2007 VIN: 1W9H45217E285750 Trailer Mounted Air Foam Unit Location: United States of America Learn More

Air Compressor Serial Number: AIA1146806 / 1616725781 Hours: 5,439 Engine: Caterpillar C15 Horsepower: 440 328 kW 1,600 CFM Booster Make: CIP Model: PHT/2 Hours: 4,862 Engine: Cummins QSM11 Horsepower: 400 298 kW Mist Pump Make: KERR Model: KP3300 Hours: 2,194 Plunger Size: 1.75 Transmission: Twin Disc SP111HP3 Engine: Cummins B4.5T-P99 Horsepower: 99 74 kW Trailer Make: Wade Model: WHT-45FT Year: 2006 VIN: 1W9FH45276F285203 Trailer Mounted Air Foam Unit Location: United States of America Learn More