Search results for: 'blade gener hire for size'

- BOP Hoses - 2 3/8" Inch Inside BOP - 2 7/8" Inch Inside BOP - Choke Manifold - 2 3/8" Inch Kelly Clock - 2 7/8" Inch Kelly Clock - 2 3/8" Inch IBOP - 2 7/8" Inch IBOP - Koomey - Poor Boy Degasser - Test Stump - 7 1/16" Inch 3,000 PSI BOP Pipe Rams - 7 1/16" Inch BOP Blind Rams - Pipe Ram Blocks for 7 1/16" Inch BOP Variable also 3 1/2" Inch & 4 1/2" Inch Blind Ram Blocks for 7 1/16" Inch BOP - 7 1/16" Inch BOP Annular Preventer - 3 Station Sized to run BOP Stack above BOP Actuator - 1x Set of Hydraulic Hoses to connect Actuator with BOP Stack - 2 1/16" Inch 3,000 PSI Manual Operated HCR Valve - 3x 2 1/16" Inch 3,000 PSI Manual Operated Shut Off Valve - 7 1/16" Inch 3,000 PSI with 2 1/16" Inch Side Outlets Drilling Spool - 2 Channel 3,000 PSI 2 1/16" Inch Choke Manifold - 2x 6 Metre + 3,000 PSI 2 1/16" Inch Connect to HCR and Choke Flexible Choke Line - 2x BOP Starter Flange to suit Lower Drilling Spool to make up onto PWT - 3x Sets of all seal rings needed for coupling up the BOP Stack BOP Equipment Package Location: New South Wales, Australia Learn More

Make: VersaDrill Model: KmN1.4sm Year: 2022 Hours: 3,500 Depth Capacity: N Size @ 2,294 m (7,526 ft) Rotary Head Ratio: 1:2,33 Speed: 0 to 1,250 RPM Spindle Interior Dimension: 124 mm (4.9" Inches) Hydraulic Motor: 160 CC Variable Track Mounted Core Drill Rig Location: United States of America Learn More

Make: Norton Clipper Model: 70184693006 BBL350 3 Phase Cutting Length: 500 mm Bore Maximum Cutting Depth: 125 mm Blade: 500 mm x 25.4 mm Maximum Material Height: 355 mm - 4.0kW / 415 Volt - Stay level blade guard - Conveyor cart with non-slip rubber and tilt lock wheels - Water return channels - Fully protected blade support shaft - Crank controlled cutting depth adjustment and head locking device - Accurate and stable cut - Dry and clean area improving users comfort - Users safety and bearings protection - Shock-free cutting, good pressure control for better cutting quality - Accurate cutting depth adjustment and straight through cutting Economical Block Saw Location: Western Australia Learn More

Make: Gardner Denver Type: 5x6 Engine: Kubota V3300 4 Cylinder Water Cooled - Diesel Driven - Manual Clutch - Belt Drive - Pulsation Dampener - OTECO Pin Pressure Valve - 200 Litre Fuel Tank Dimensions; Length: 2,950 Width: 1,500 Height: 2,300 Weight: 2.4 Tonne Skid Mounted Duplex Mud Pump Location: Queensland, Australia Learn More

Model: Bowen Size: 118 Gearench PUVTH: 118 BO Petol Push Up Visetong Location: Western Australia Learn More

Make: Regan Torus Size: 7 1/6" Inch 3K PSI: 1,500 / 3,000 Annular BOP Location: Queensland, Australia Learn More

Model: Single Ram PSI: 3,000 Bore Size: 11" Inch Temp Class: T-20/250 Dimensions: 82.5" x 29.8" x 22.6" Weight: 3,813 lb Blowout Preventer BOP Location: Queensland, Australia Learn More

Make: Sandvik Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Track Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Caterpillar Model: D9 Hours: Approx. 1,300 Engine: Caterpillar C18 @ 477 HP Track Shoes: 610 mm Track Rollers: 8 + 8 (Both Sides) - SS Ripper - SU Single Tilt Blade - Air Conditioned Cabin Track Mounted Crawler Bulldozer Location: India Learn More

Make: Komatsu Model: D475A-5E0 Year: 2023 Hours: 6,075 - Needs Plates and Sprockets - Complete with Blade and SS Ripper Track Mounted Crawler Bulldozer Location: Middle East Learn More

Make: AFHTechFLOW Package Type: Gas Heating & Pressure Regulating Skid Application: Fuel gas conditioning for gas engine / generator Year: October 2014 Fluid: Natural Gas / Fuel Gas Typical End Use: GE Jenbacher Gas Generator Fuel Gas Train Electrical Supply: 415 V, 3-phase, 50 Hz Heater Power Load: ~11 kW Gas Inlet Connection: Flanged pipeline inlet Gas Outlet Connection: Flanged connection to engine gas train Drains: Heater vessel drain Relief: PSVs vented to atmosphere Earthing: Dedicated skid earth lug Nominal Gas Flow: 330 Nm³/hr Maximum Flow Rate: 330 Nm³/hr Inlet Pressure (Operating): 35 – 90 barg Inlet Pressure (Design / MAOP): 102 barg (upstream of regulator PRV2301) Outlet Pressure (Operating): 4 barg Inlet Temperature: 2 – 60 °C Outlet Temperature: 0 – 40 °C Design Temperature Range: -15 to +60 °C Gas Quality Assumption: Pipeline Quality Natural Gas Gas Heating System; - Electric gas heater, 10.8 kW - Explosion-protected heater suitable for Zone 1 - Carbon steel pressure vessel heater housing - 100 NB, Class 600 - Designed to AS 1210 PT100 RTD temperature elements; - Element sheath over-temperature protection - Heater outlet temperature control Thyristor-controlled heater system; - Control panel supplied separately for non-hazardous area installation - Heater pressure safety relief valve Pressure Control & Safety; - Primary pressure regulator (carbon steel body) - Over-pressure shut-off valve with fracture disk - Pressure safety relief valve (PSV) - Pressure gauges with block and bleed valves - Manual isolation ball valves (Class 800) Gas Filtration & Separation; - Cyclone separator for liquid droplet removal - Particle filter rated >3 µm - Designed to prevent condensate and solids entering engine gas train Fuel Gas Conditioning Skid Location: Queensland, Australia Learn More

Make: Komatsu Model: D375A-6R Year: 2025 Hours: 0 - SU Blade - SS Ripper - ROPS - FOBS - Air Conditioned Cab Track Mounted Crawler Bulldozer Location: Egypt Learn More

Make/Model: DE740 Engine: Cummins QSB6.7 Inline 6 Cylinder Tier 3 Depth Capacity; TK56: 3.187 m B: 2.350 m TK66: 2.731 m N: 2 m TK76: 1.886 m H: 1.4 m P: 831 m Feed Force: 6.8 Tonne (15,000 lbf) Pull Force: 13.6 Tonne (30,000 lbf) Feed Length (Stroke): 3.45 m Speed Up & Down: 30 m/min Features; - "P" Size Chuck Drive C40 Rotation Head with Hollow Spindle and Stepless Speed Control - Telescoping Upper Mast - All Hydraulically Operated - Self-Propelled Drill Unit - Rod Spin Guard - 1x Rod Clamp can support; B, N, H, P and S Rod Sizes; 44.5 mm to 177.8 mm - Head Traverse System directly coupled to Rotation Head Carriage - Wireline Wiper and Safety Cut Out + Options Drill Rig Location: TBA (New Build - Built to Order) Learn More

Make: Komatsu Model: D65WX-16 Year: 2011 Hours: 10,770 - Enclosed Air Conditioned Cab - 6 Way PAT Blade - Service History Track Mounted Crawler Dozer Location: Queensland, Australia Learn More

Make: Komatsu Model: D375A-6 Hours: 8,800 Year: 2019 - Strong Undercarriage - Auto Ladder - SS Ripper - U-Blade with Twin Tilts Track Mounted Crawler Dozer Location: United States of America Learn More

Air Compressor Make: Atlas Copco Model: XRVS 606CD ASME Hours: 4,132 Engine: Caterpillar C18 Horsepower: 575 429 kW 1,350 CFM Booster Make: Hurricane Model: 6T-276-42B Hours: 3,954 Engine: Caterpillar C7 Horsepower: 250 186.5 kW Mist Pump Make: KERR Model: KP3300 Hours: 1,495 Plunger Size: 1.75 Transmission: Eaton FS 5406A Engine: Deutz BF4L914 Horsepower: 97 72.4 kW Trailer Make: Wade Year: 2007 VIN: 1W9H45217E285750 Trailer Mounted Air Foam Unit Location: United States of America Learn More

Air Compressor Serial Number: AIA1146806 / 1616725781 Hours: 5,439 Engine: Caterpillar C15 Horsepower: 440 328 kW 1,600 CFM Booster Make: CIP Model: PHT/2 Hours: 4,862 Engine: Cummins QSM11 Horsepower: 400 298 kW Mist Pump Make: KERR Model: KP3300 Hours: 2,194 Plunger Size: 1.75 Transmission: Twin Disc SP111HP3 Engine: Cummins B4.5T-P99 Horsepower: 99 74 kW Trailer Make: Wade Model: WHT-45FT Year: 2006 VIN: 1W9FH45276F285203 Trailer Mounted Air Foam Unit Location: United States of America Learn More

Air Compressor Make: Atlas Copco Model: XASE 1600CD ASME Box Hours: 3,682 Engine: Caterpillar C15 Horsepower: 440 328 kW 1,600 CFM Booster Make: CIP Model: PHT/2 Hours: 3,605 Engine: Cummins QSM11 Horsepower: 400 298 kW Mist Pump Make: KERR Model: KT3350 Hours: 2,819 Plunger Size: 2 Engine: Cummins B4.5T-P99 Horsepower: 99 74 kW Trailer Make: Aztec Trailers Year: 2006 VIN: 1A9BM1B606M362243 Trailer Mounted Air Foam Unit Location: United States of America Learn More

Air Compressor Serial Number: 200607100029 Engine: Caterpillar C18 Horsepower: 700 522 kW 1,500 CFM Booster Make: CIP Model: PHT/2 Engine: Caterpillar C9 Horsepower: 325 Mist Pump Make: KERR Model: KP3300 Hours: 3,962 Plunger Size: 1.75 Engine: Caterpillar 3054C Trailer Make: Nuttall Year: 2007 Serial Number: 4C9LN492X7A061136 Trailer Mounted Air Foam Unit Location: United States of America Learn More

Air Compressor Make: Atlas Copco Model: XRVS 606CD ASME Engine: Caterpillar C18 Horsepower: 575 429 kW 1,350 CFM Booster Make: John Deere Model: 4045DF270 Engine: Caterpillar 3126 Horsepower: 250 186.5 kW Mist Pump Make: KERR Model: KP3300 Plunger Size: 1.75 Transmission: Eaton FS 5706A Engine: Deutz BF4L914 Horsepower: 97 72.4 kW Trailer Make: Fontaine Model: VDT-1-8048AWK Year: 2007 Trailer Mounted Air Foam Unit Location: United States of America Learn More