Search results for: 'chuck hire for sale in california'
- Related search terms
- hire for sale mclean screen manassas va
- hire for sale indianapolis indux
- hire for sale indianapolis input
- sale we enabled rate in bros
- sale we enabled rate in base
-
40' Foot Accommodation/Kitchen/Shower Mounted on Tri-Axle Trailer with Dolly (FOR HIRE/RENT - POA) (hire-ehub4457)For HireType: 40' Foot - 2x Bedrooms with Bunks - Air Conditioning (Recently Replaced) - Kitchen - Shower (No Toilet) - Includes Dolly - Tri-Axle Trailer - Recently Sandblasted & Painted Trailer Mounted Accommodation Location: Northern Territory, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Northern Territory, Australia
MODEL 40' Foot
-
40' Foot Accommodation/Kitchen/Shower Mounted on Tri-Axle Trailer with Dolly (POA) (sale-ehub4457)For Sale$0.00Type: 40' Foot - 2x Bedrooms with Bunks - Air Conditioning (Recently Replaced) - Kitchen - Shower (No Toilet) - Includes Dolly - Tri-Axle Trailer - Recently Sandblasted & Painted Trailer Mounted Accommodation Location: Northern Territory, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Northern Territory, Australia
MODEL 40' Foot
-
Tatra 8x8 RC Support Truck with 4,000 Litre Water & Diesel Tanks (POA) (sale-ehub4456)For Sale$0.00Make: Tatra KM's: 143,940 Type: 8x8 - 2x 4,000 Litre Diesel Tanks - 1x 4,000 Litre Water Tank - Safety Rails & Ladder Access - 24 Volt Electric Diesel Fuel Pump & Reel - Custom RC Hammer & Bit Storage - Mine Spec (UHF, Hi Viz, etc.) - Holds Approx. 550 Metre or 4.5" Inch RC Rods - Transfer Case Output Shaft and Drive Tube replaced around 20,000 km ago - Some rust appeared (in cab) and has been cut out and repaired Support Truck Location: Western Australia Learn MoreMachine hours N/A KILOMETERS 143,940
YEAR N/A BRAND Tatra
LOCATION Western Australia
MODEL 8x8
-
Workshop Ute Tray Bodies (POA) (sale-ehub4455)For Sale$0.00Workshop Ute Tray Bodies Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
2009 Mudslayer 500 Mounted on Trailer (POA) (sale-ehub4454)For Sale$0.00Make: Mudslayer Model: 500 Year: 2009 Hours: 2,300 Engine: John Deere 4045 - New Screens on Sharker Deck - New Sand Guzzler - Registered Trailer Mounted Mudslayer Location: Western Australia Learn MoreMachine hours 2,300
KILOMETERS N/A YEAR 2009
BRAND N/A
LOCATION Western Australia
MODEL Mudslayer 500
-
2024 Forward RC3 Track Mounted Water Well Drill Rig (POA) (sale-ehub4453)For Sale$0.00Make: Forward Model: RC3 Year: 2024 Hours: 128 Engine: Cummins 6BTA Drilling Capacity: 380 m Drilling Diameter: 10" Inches Drill Head Rotation: 0-120 RPM / 5,600 Nm Pull Back Force: 120 kN Hoist Capacity: 20 kN Feed Stroke: 3,400 mm Mast Height: 6,400 mm Mud Pump: 450 Litres per minute at 1,000 PSI Crawl Speed: 3 km/h Weight: 1,180 kg Dimensions: 6,400 x 2,250 x 400 - Remote Tramming - Jack Legs - Mast Tilt - Mast Pump Includes; - 150 Metres of Rods & Different Sized Bits - Settling Tank - Hoses Modifications; - P.R.D Dual Breakout 210 mm Diameter (Can be swung out of way to allow larger install) - Larger Hydraulic Pump Installed Track Mounted Water Well Drill Rig Location: Western Australia Learn MoreMachine hours 128
KILOMETERS N/A YEAR N/A BRAND Forward
LOCATION Western Australia
MODEL RC3
-
GN Solids Hydraulic Jack Up Leg Mud Cleaning Unit (POA) (sale-ehub4452)For Sale$0.00Make: GN Solids Tank Capacity; 20,000 Litres Weight: 15 Tonnes Length: 8.5 Metres Width: 2.4 Metres - 2x Mixing Tanks - Blast Proof Cabinets Hydraulic Jack Up Leg Mud Cleaning Unit Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND GN Solids
LOCATION Western Australia
MODEL N/A
-
2008 JCB 540-170 Loadall Telehandler + Attachments (POA) (sale-ehub4451)For Sale$0.00Make: JCB Model: 540-170 Loadall Year: 2008 Hours: Under 5,000 - Fire Suppression Attachments; - For - Jib - Man Cage Telehandler Location: Tasmania, Australia Learn MoreMachine hours Under 5,000
KILOMETERS N/A YEAR 2008
BRAND JCB
LOCATION Tasmania, Australia
MODEL 540-170 Loadall
-
Kurth KB25 Track Mounted Rotary Drill Rig ($115,000 ex GST) (sale-ehub4450)For Sale$0.00Make: Kurth Model: KB25 Rotation Speed: 0-120 RPM Max. Torque: 5,000 Nm Stroke: 2,300 mm Max. Pullback Force: 48 kN Max. Feed Force: 32 kN Max. Casing Clamping Diameter: 273 mm Max. Casing Pullback Force: 150 kN Rotary Drive Travel Speed: 40m/min (max.) Rotary Drive Tilt Out Angle: 40 degrees from vertical - Set up for Shell & Auger - Drilling & Casing Clamp Range from 114 mm OD to 219 mm OD Drilling Capacity; Auger Drilling with Casings Ø 219/178 mm: 25-40 metres Hollow Stem Augers Ø 195/110 mm: 40 metres Direct Mud Rotary Drilling Ø 190 mm: 100 metres Down Hole Hammer Drilling Ø 150 mm: 100 metres Track Mounted Rotary Drill Rig Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL KB25
-
Radio Controlled & Mine Spec Hydraulic Jack Up Rod Sloop (POA) (sale-ehub4392)For Sale$0.00Deck: 6.2 Metre - Radio Controlled - Full Remote Operation with Manual Override - Certificate provided on application - In-Built Counterbalance Valves - Mine Site Spec'd including Fire Extinguisher, Hydraulic Hose Sleeving and E-Stops - Battery & Key Isolation Optional Extras; - Handrails - Container Locks - Deck Length Extension which includes Storage Area Hydraulic Jack Up Rod Sloop Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
VB10 Track Mounted Dual Rotary Drill Rig ($409,500 ex GST) (sale-ehub4427)For Sale$409,500.00Model: VB10 Engine: Deutz TCD2012L04 4 Cylinder Working Pressure: Max. 350 Bar Torque (Inside Rods): 3,700 / 7,400 Speed: 120 / 60 RPM Torque (Outside Rods): 12,000 / 24,000 Speed: 54 / 27 RPM Max. Breaking Torque: 46,000 Nm Drill Pole; Pole Profile: 300 x 200 x 8 mm Pole Height: 7,190 mm Stroke: 3,600 mm Hook Load / Pulling Force (Chain): 120 kN / 245 kN Max. Contact Pressure (Chain): 60 kN Travelling Speed: Up to 40 m/min Max. Rod Length: 2 m Track Mounted Dual Rotary Drill Rig Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL VB10
-
2022 VersaDrill KmN1.4sm Track Mounted Core Drill Rig (POA) (sale-ehub4426)For Sale$0.00Make: VersaDrill Model: KmN1.4sm Year: 2022 Hours: 3,500 Depth Capacity: N Size @ 2,294 m (7,526 ft) Rotary Head Ratio: 1:2,33 Speed: 0 to 1,250 RPM Spindle Interior Dimension: 124 mm (4.9" Inches) Hydraulic Motor: 160 CC Variable Track Mounted Core Drill Rig Location: United States of America Learn MoreMachine hours 3,500
KILOMETERS N/A YEAR N/A BRAND Versadrill
LOCATION United States of America
MODEL KmN1.4sm
-
2x Tsurumi 80SFQ211 Submersible Pumps (POA) (sale-ehub4425)For Sale$0.00Make: Tsurumi Model: 80SFQ211 Discharge: 80 mm Frequency: 50 Hz Total Head Max.: 44 m Capacity Max.: 1.94 m3/min Phase: 3 Induction Motor Output: 11 kW Voltage: 380/400/415 Current: 22.5/21.0/21.0 - Sea Water Quality - Installed & Commissioned (Never Used) Quantity: 2 Submersible Pumps Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL 80SFQ211
-
2022 Epiroc Scooptram ST14 Wheel Loader (POA) (sale-ehub4423)For Sale$0.00Make: Epiroc Model: Scooptram ST14 Year: 2022 Hours: 6,493 Serial Number: TMG22URE0603 Wheel Loader Location: Chile Learn MoreMachine hours 6,493
KILOMETERS N/A YEAR N/A BRAND Epiroc
LOCATION Chile
MODEL Scooptram ST14
-
6 5/8" Rebuilt Easily Modified Rod Spinner ($13,000 ex GST) (sale-ehub3233)For Sale$13,000.00Table Opening: 6 5/8" Inch - Can Handle Large Diameter Pipe - Mount Fits UDR650 - Has been rebuilt - Easily Modified Condition: Good Working Order - Jaws in excellent condition Rod Spinner Location: Victoria, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Victoria, Australia
MODEL 6 5/8" Inch
-
DS Curtis PMC 1204-606 + FLEXIT SmartTool Drillhole Survey System Wireline Winch & Tooling (Open to Offers) (sale-ehub4422)For Sale$0.00Make: DS Motor Controller; Make: Curtis PMC Model: 1204-606 Voltage: 12 Current: 275 Serial Number: 7005-719410 FLEXIT SmartTool Drillhole Survey System Wireline Winch & Tooling Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL See Description
-
Norton Clipper 70184693006 BBL350 3 Phase Economical Block Saw (Open to Offers) (sale-ehub4421)For Sale$0.00Make: Norton Clipper Model: 70184693006 BBL350 3 Phase Cutting Length: 500 mm Bore Maximum Cutting Depth: 125 mm Blade: 500 mm x 25.4 mm Maximum Material Height: 355 mm - 4.0kW / 415 Volt - Stay level blade guard - Conveyor cart with non-slip rubber and tilt lock wheels - Water return channels - Fully protected blade support shaft - Crank controlled cutting depth adjustment and head locking device - Accurate and stable cut - Dry and clean area improving users comfort - Users safety and bearings protection - Shock-free cutting, good pressure control for better cutting quality - Accurate cutting depth adjustment and straight through cutting Economical Block Saw Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL Norton Clipper 70184693006 BBL350 3 Phase
-
2x Cummins M11 Engines ($6,500 ex GST each) (sale-ehub4420)For Sale$6,500.00Make: Cummins Model: M11 Engine Number: 35214881 & 35256315 Quantity: 2 - Were running when retired from service 2 years ago (Have been parked up since) - Will need rebuilding Engine Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Cummins
LOCATION Queensland, Australia
MODEL M11
-
2008 Caterpillar CAT R1700G Wheel Loader (POA) (sale-ehub4419)For Sale$0.00Make: Caterpillar Model: R1700G Year: 2008 Hours: 3,500 - Never Rebuilt - Parked Inside for last 10 years - Fully Operable & In Working Condition Wheel Loader Location: Canada Learn MoreMachine hours 3,500
KILOMETERS N/A YEAR 2008
BRAND Caterpillar
LOCATION Canada
MODEL R1700G
-
2011 Caterpillar CAT R1600G Wheel Loader (POA) (sale-ehub4418)For Sale$0.00Make: Caterpillar Model: R1600G Year: 2011 Hours: 32,413 Serial Number: CATR1600G9YZ00729 Wheel Loader Location: Canada Learn MoreMachine hours 32,413
KILOMETERS N/A YEAR 2011
BRAND Caterpillar
LOCATION Canada
MODEL R1600G
Filter