Search results for: 'dozer size prime head hire cab ct14 cfm'
- Did you mean
- dozer sale prime head hire cab ct14 cfm
- Related search terms
- cab i enabl dump in the nvidia api
- cab i enabl dams in the nvidia amc
- cab i enabl dump in the nvidia amc
- hire for sale indianapolis india
- dozer sale prime head hire cip cjt64 cfm
-
4 Metre x 2 Metre Portable Building / Office with Air Conditioning ($5,750 ex GST) (sale-ehub4447)For Sale$5,750.00Size: 4 Metre x 2 Metre - Air Conditioning Portable Building / Office Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL 4x2
-
2011 Atlas Copco Mustang F-13 Track Mounted Multipurpose Drill Rig (POA) (sale-ehub4439)For Sale$0.00Make: Atlas Copco Model: Mustang F-13 Year: 2011 Hours: 5,302 Serial Number: CRG112662111-1 Accessories: Surplus Rods & Spare Parts Capacity; HQ: 800 Metres PQ: 350 Metres Open Hole: 650 Metres (Depends on Type of Rods used) - Upgraded from Original Spec (Completed by Atlas Copco) - Hydraulic System (Bigger Pumps) & Gear Box (Rotation Unit) + Bigger Cooling Pack to Hydraulic - Two Speed Main Winch @ 8 Tonne Pullback - Head @ 13 Tonne Pullback - 140 Trido Flush Pump Track Mounted Multipurpose Drill Rig Location: Tasmania, Australia Learn MoreMachine hours 5,302
KILOMETERS N/A YEAR 2011
BRAND Atlas Copco
LOCATION Tasmania, Australia
MODEL Mustang F-13
-
BOP Equipment Package (POA) (sale-ehub4433)For Sale$0.00- BOP Hoses - 2 3/8" Inch Inside BOP - 2 7/8" Inch Inside BOP - Choke Manifold - 2 3/8" Inch Kelly Clock - 2 7/8" Inch Kelly Clock - 2 3/8" Inch IBOP - 2 7/8" Inch IBOP - Koomey - Poor Boy Degasser - Test Stump - 7 1/16" Inch 3,000 PSI BOP Pipe Rams - 7 1/16" Inch BOP Blind Rams - Pipe Ram Blocks for 7 1/16" Inch BOP Variable also 3 1/2" Inch & 4 1/2" Inch Blind Ram Blocks for 7 1/16" Inch BOP - 7 1/16" Inch BOP Annular Preventer - 3 Station Sized to run BOP Stack above BOP Actuator - 1x Set of Hydraulic Hoses to connect Actuator with BOP Stack - 2 1/16" Inch 3,000 PSI Manual Operated HCR Valve - 3x 2 1/16" Inch 3,000 PSI Manual Operated Shut Off Valve - 7 1/16" Inch 3,000 PSI with 2 1/16" Inch Side Outlets Drilling Spool - 2 Channel 3,000 PSI 2 1/16" Inch Choke Manifold - 2x 6 Metre + 3,000 PSI 2 1/16" Inch Connect to HCR and Choke Flexible Choke Line - 2x BOP Starter Flange to suit Lower Drilling Spool to make up onto PWT - 3x Sets of all seal rings needed for coupling up the BOP Stack BOP Equipment Package Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL N/A
-
2007 Thor Drill Rig Mounted on 2006 Mercedes Benz Actros 3341A 6x6 Truck + 2007 Tatra Water & Fuel Support Truck & 2008 Pig Trailer (POA) (sale-ehub4430)For Sale$0.00Drill Rig Make: Thor Year: 2007 Hours: 1,905 Air Compressor: 600 CFM / 350 PSI Max. Diameter Depth: 130 mm Max. Aircore Depth: 150 mm Wheel Base: MB 6x6 Drill Angles: 55 to 90 degrees - 3 Axle SPV (No Load Over Axle Mass Limits) Rig Truck Make: Mercedes Benz Model: Actros 3341A Year: 2006 Engine: 54194500455057 VIN: WDB9301832L123007 Type: 6x6 GVM: 33,000 kg Support Truck Make: Tatra Year: 2007 Engine Number: T3C92881608002752 VIN: TNU28PR257KO42431 Water Capacity: 2,500 Litres Fuel Capacity: 4,500 Litres - 3 Axle Rigid Vehicle (No Trailer over 4.5 Tonne Gross) Pig Trailer Make: Park Body Builders Year: 2008 VIN: 6T9T23WA18017E011 - 1 Axle Trailer / Semi-Trailer Truck Mounted Drill Rig Water & Fuel Support Truck Location: Western Australia Learn MoreMachine hours 1,905
KILOMETERS N/A YEAR 2007
BRAND Thor
LOCATION Western Australia
MODEL N/A
-
RAB/Air Core Drill Rig Mounted on 2007 Hino GT1J Series 2 Truck + 2008 Hino GT 8J Tray Top Water & Fuel Support Truck (POA) (sale-ehub4429)For Sale$0.00Drill Rig Hours: 457 Engine: Perkins 4.236 Air Compressor: Sullair 600 CFM / 200 PSI Air Compressor Engine: Caterpillar CAT 3208 @ 250 HP Compressor Hours: 29 Drilling Method: Air Core & RAB Drilling Depth: 120 m Drilling Angles: 55 to 90 degrees Drill Rod Specifications: 3" Inch Air Core Additional Equipment; - Dump Mast - 4 Metre Head Travel - Auto Rod Spinners - Automatic Brake Outs - Onboard Cyclone - Water Injection Dust Suppression Truck Make: Hino Model: GT1J Series 2 Year: 2007 KM's: 13,264 GVM: 13,000 kg GCM: 21,000 kg Support Truck Make: Hino Model: GT 8J (GT 1322) Year: 2008 KM's: 83,514 GVM: 13,000 kg GCM: 21,000 kg Water Capacity: 2,500 Litres Fuel Capacity: 4,500 Litres Truck Mounted Drill Rig Tray Top Water & Fuel Support Truck Location: Western Australia Learn MoreMachine hours 457
KILOMETERS 13,264
YEAR 2007
BRAND Hino
LOCATION Western Australia
MODEL GT1J Series 2
-
1996 KL150 Drill Rig Mounted on Morooka MST-2500 + 2011 Iveco Bulk Water & Fuel Support Truck (POA) (sale-ehub4428)For Sale$0.00Drill Rig Make: KL Model: 150 Year: 1996 Hours: 8,120 Engine: Cummins Air Compressor: 800 CFM / 280 PSI Drilling Method: Air Core & RAB Drilling Depth: 120 m Drilling Angles: 55 to 90 degrees Drill Rod Specifications: 3" Inch Air Core / 3.5" Inch RC Rods (Slimline RC) Mounted: Morooka MST-2500 with Mercedes Benz Engine Serial Number: 95/016 Additional Equipment; - Dump Mast - 4 Metre Head Travel - Auto Rod Spanners - Automatic Brake Outs - Onboard Cyclone - Water Injection Dust Suppression Dimensions; Height: 3 m Length: 6 m Width: 3 m Support Truck Make: Iveco Year: 2011 Type: 4x4 Water Capacity: 2,500 Litres Fuel Capacity: 4,500 Litres Track Mounted Drill Rig Bulk Water & Fuel Support Truck Location: Western Australia Learn MoreMachine hours 8,120
KILOMETERS N/A YEAR 1996
BRAND KL
LOCATION Western Australia
MODEL 150
-
2022 VersaDrill KmN1.4sm Track Mounted Core Drill Rig (POA) (sale-ehub4426)For Sale$0.00Make: VersaDrill Model: KmN1.4sm Year: 2022 Hours: 3,500 Depth Capacity: N Size @ 2,294 m (7,526 ft) Rotary Head Ratio: 1:2,33 Speed: 0 to 1,250 RPM Spindle Interior Dimension: 124 mm (4.9" Inches) Hydraulic Motor: 160 CC Variable Track Mounted Core Drill Rig Location: United States of America Learn MoreMachine hours 3,500
KILOMETERS N/A YEAR N/A BRAND Versadrill
LOCATION United States of America
MODEL KmN1.4sm
-
2x Tsurumi 80SFQ211 Submersible Pumps (POA) (sale-ehub4425)For Sale$0.00Make: Tsurumi Model: 80SFQ211 Discharge: 80 mm Frequency: 50 Hz Total Head Max.: 44 m Capacity Max.: 1.94 m3/min Phase: 3 Induction Motor Output: 11 kW Voltage: 380/400/415 Current: 22.5/21.0/21.0 - Sea Water Quality - Installed & Commissioned (Never Used) Quantity: 2 Submersible Pumps Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL 80SFQ211
-
Norton Clipper 70184693006 BBL350 3 Phase Economical Block Saw (Open to Offers) (sale-ehub4421)For Sale$0.00Make: Norton Clipper Model: 70184693006 BBL350 3 Phase Cutting Length: 500 mm Bore Maximum Cutting Depth: 125 mm Blade: 500 mm x 25.4 mm Maximum Material Height: 355 mm - 4.0kW / 415 Volt - Stay level blade guard - Conveyor cart with non-slip rubber and tilt lock wheels - Water return channels - Fully protected blade support shaft - Crank controlled cutting depth adjustment and head locking device - Accurate and stable cut - Dry and clean area improving users comfort - Users safety and bearings protection - Shock-free cutting, good pressure control for better cutting quality - Accurate cutting depth adjustment and straight through cutting Economical Block Saw Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL Norton Clipper 70184693006 BBL350 3 Phase
-
Gardner Denver 5x6 Diesel Driven Skid Mounted Duplex Mud Pump (FOR HIRE/RENT - POA) (hire-ehub4415)For HireMake: Gardner Denver Type: 5x6 Engine: Kubota V3300 4 Cylinder Water Cooled - Diesel Driven - Manual Clutch - Belt Drive - Pulsation Dampener - OTECO Pin Pressure Valve - 200 Litre Fuel Tank Dimensions; Length: 2,950 Width: 1,500 Height: 2,300 Weight: 2.4 Tonne Skid Mounted Duplex Mud Pump Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Gardner Denver
LOCATION Queensland, Australia
MODEL 5x6
-
Bowen 118 Gearench Petol Push Up Visetong ($3,500 ex GST) (sale-ehub4402)For Sale$3,500.00Model: Bowen Size: 118 Gearench PUVTH: 118 BO Petol Push Up Visetong Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL Bowen 118 Gearench
-
Austex X1550 Drill Rig ($580,500 ex GST) (sale-ehub4397)For Sale$580,500.00Make: Austex Model: X1550 Hours: 5,200 - Setup to be removed from truck - New Head fitted to rig in 2025 - MWL Rod Loader fitted in 2025 - Major Overhaul to meet MDG15 Compliance 2025 - Can Include the Rod Sloop (that matches truck) for the extra price @ $26,900 ex GST Drill Rig Location: New South Wales, Australia Learn MoreMachine hours 5,200
KILOMETERS N/A YEAR N/A BRAND AustEx
LOCATION New South Wales, Australia
MODEL X1550
-
1994 Western Star 4900 6x4 Prime Mover Truck ($27,000 ex GST) (sale-ehub4388)For Sale$27,000.00Make: Western Star Model: 4900 Year: 1994 KM's: 695,477 Hours: 18,429 Type: 6x4 Prime Mover Truck Location: Queensland, Australia Learn MoreMachine hours 18,429
KILOMETERS 695,477
YEAR 1994
BRAND Western Star
LOCATION Queensland, Australia
MODEL 4900
-
1999 Kenworth T404 6x4 Prime Mover Truck ($39,000 ex GST) (sale-ehub4387)For Sale$39,000.00Make: Kenworth Model: T404 Year: 1999 KM's: 697,090 Type: 6x4 Prime Mover Truck Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS 697,090
YEAR 1999
BRAND Kenworth
LOCATION Queensland, Australia
MODEL T404
-
Regan Torus 7 1/6" Inch 3K Annular BOP ($27,272.73 ex GST) (sale-ehub4381)For Sale$27,272.73Make: Regan Torus Size: 7 1/6" Inch 3K PSI: 1,500 / 3,000 Annular BOP Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL Regan Torus 7 1/6" Inch 3K
-
11" Inch Single Ram BOP Blowout Preventer ($22,727.28 ex GST) (sale-ehub4380)For Sale$0.00Model: Single Ram PSI: 3,000 Bore Size: 11" Inch Temp Class: T-20/250 Dimensions: 82.5" x 29.8" x 22.6" Weight: 3,813 lb Blowout Preventer BOP Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL Single Ram 11" Inch
-
Sandvik DE712 Track Mounted Drill Rig (FOR HIRE/RENT - POA) (hire-ehub4379)For HireMake: Sandvik Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Track Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Queensland, Australia
MODEL DE712
-
1992 Reichdrill T-100 Drill Rig Mounted on Custom Crane Carrier ($65,000 ex GST) (sale-ehub4350)For Sale$65,000.00Rig Make: Reichdrill Model: T-100 Year: 1992 Hours: 3,567 Engine: Cummins (700 HP) Pull Up: 50 Tonne Pull Down: 20 Tonne Capacity: 1,200 m - Hydraulic Pipe Handler attached to Mast - 2 Speed Head - 140 RPM Max. Rotation - 132,000 lb Torque - Manual Slips w/ Dies to suit 2 3/8" Inch, 2 7/8" Inch & 3 1/2" Inch Pipe - Has sat for 3 years, need some refurbishment - Heavy Duty, Deep Water Rig Carrier Make: Custom Miles: 17,064 Engine: Cummins Crane Carrier Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours 3,567
KILOMETERS N/A YEAR 1992
BRAND Reichdrill
LOCATION Queensland, Australia
MODEL T-100
-
2020 Wacker Neuson TH412 Telehandler with Forklift Attachment ($89,000 ex GST) (sale-ehub3386)For Sale$89,000.00Make: Wacker Neuson Model: TH412 Year: 2020 Hours: Less than 500 Engine: Yanmar 3TNV80FT @ 25HP Chassis Operating Pressure: 5,510 PSI / 380 bar Hydraulic Operating Pressure: 3,190 PSI / 220 bar Payload Max: 1,250 kg Payload Lift Max: 1,250 kg Lift Bucket Swivel: 4,537 mm Dimensions Length: 3,944 mm (2,991 mm w/out Bucket) Width: 1,564 mm Height: 5,280 mm (1,995 mm Just Cab) Weight: 2,750 kg - Forklift Attachment - Side Shift - Air Conditioning / Heating & Ventilation - ROPS / FOPS tested with VSG safety window on right side - Front, Roof & Rear Wipers - Heated Rear Window - Tilt Display - Sun Shade - Bottle Holder - Storage Net - LED Work Lights (1x Front & 1x On Cab Roof) Telehandler Location: Western Australia Learn MoreMachine hours Less than 500
KILOMETERS N/A YEAR 2020
BRAND Wacker Neuson
LOCATION Western Australia
MODEL TH412
-
2018 Exploration Drill Masters EDM 95K Track Mounted Drill Rig (POA) (sale-ehub4344)For Sale$0.00Make: Exploration Drill Masters EDM Model: 95K Year: 2018 Hours: 32,431 Drill Head Hours: 32,431 Compressor Hours: 32,431 Onboard Air Pack: Sullair 1,150 CFM / 500 PSI Air Compressor - Spare Parts available (can provide a detailed list with pricing) - EDM MK2 Core Rod Feeder (For additional $USD350,000) Track Mounted Drill Rig Location: United States of America Learn MoreMachine hours 32,431
KILOMETERS N/A YEAR 2018
BRAND EDM
LOCATION United States of America
MODEL 95K
Filter