Search results for: 'foot revers r pop 2008 for spare'

2024 Forward RC3 Track Mounted Water Well Drill Rig (POA) (sale-ehub4453)

For Sale

$0.00

Make: Forward Model: RC3 Year: 2024 Hours: 128 Engine: Cummins 6BTA Drilling Capacity: 380 m Drilling Diameter: 10" Inches Drill Head Rotation: 0-120 RPM / 5,600 Nm Pull Back Force: 120 kN Hoist Capacity: 20 kN Feed Stroke: 3,400 mm Mast Height: 6,400 mm Mud Pump: 450 Litres per minute at 1,000 PSI Crawl Speed: 3 km/h Weight: 1,180 kg Dimensions: 6,400 x 2,250 x 400 - Remote Tramming - Jack Legs - Mast Tilt - Mast Pump Includes; - 150 Metres of Rods & Different Sized Bits - Settling Tank - Hoses Modifications; - P.R.D Dual Breakout 210 mm Diameter (Can be swung out of way to allow larger install) - Larger Hydraulic Pump Installed Track Mounted Water Well Drill Rig Location: Western Australia Learn More

Machine hours	128	KILOMETERS	N/A
YEAR	N/A	BRAND	Forward
LOCATION	Western Australia	MODEL	RC3

Add to Wish List Add to Compare

2008 JCB 540-170 Loadall Telehandler + Attachments (POA) (sale-ehub4451)

For Sale

$0.00

Make: JCB Model: 540-170 Loadall Year: 2008 Hours: Under 5,000 - Fire Suppression Attachments; - For - Jib - Man Cage Telehandler Location: Tasmania, Australia Learn More

Machine hours	Under 5,000	KILOMETERS	N/A
YEAR	2008	BRAND	JCB
LOCATION	Tasmania, Australia	MODEL	540-170 Loadall

Add to Wish List Add to Compare

Kurth KB25 Track Mounted Rotary Drill Rig ($115,000 ex GST) (sale-ehub4450)

For Sale

$0.00

Make: Kurth Model: KB25 Rotation Speed: 0-120 RPM Max. Torque: 5,000 Nm Stroke: 2,300 mm Max. Pullback Force: 48 kN Max. Feed Force: 32 kN Max. Casing Clamping Diameter: 273 mm Max. Casing Pullback Force: 150 kN Rotary Drive Travel Speed: 40m/min (max.) Rotary Drive Tilt Out Angle: 40 degrees from vertical - Set up for Shell & Auger - Drilling & Casing Clamp Range from 114 mm OD to 219 mm OD Drilling Capacity; Auger Drilling with Casings Ø 219/178 mm: 25-40 metres Hollow Stem Augers Ø 195/110 mm: 40 metres Direct Mud Rotary Drilling Ø 190 mm: 100 metres Down Hole Hammer Drilling Ø 150 mm: 100 metres Track Mounted Rotary Drill Rig Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Western Australia	MODEL	KB25

Add to Wish List Add to Compare

VB10 Track Mounted Dual Rotary Drill Rig ($409,500 ex GST) (sale-ehub4427)

For Sale

$409,500.00

Model: VB10 Engine: Deutz TCD2012L04 4 Cylinder Working Pressure: Max. 350 Bar Torque (Inside Rods): 3,700 / 7,400 Speed: 120 / 60 RPM Torque (Outside Rods): 12,000 / 24,000 Speed: 54 / 27 RPM Max. Breaking Torque: 46,000 Nm Drill Pole; Pole Profile: 300 x 200 x 8 mm Pole Height: 7,190 mm Stroke: 3,600 mm Hook Load / Pulling Force (Chain): 120 kN / 245 kN Max. Contact Pressure (Chain): 60 kN Travelling Speed: Up to 40 m/min Max. Rod Length: 2 m Track Mounted Dual Rotary Drill Rig Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Western Australia	MODEL	VB10

Add to Wish List Add to Compare

2008 Caterpillar CAT R1700G Wheel Loader (POA) (sale-ehub4419)

For Sale

$0.00

Make: Caterpillar Model: R1700G Year: 2008 Hours: 3,500 - Never Rebuilt - Parked Inside for last 10 years - Fully Operable & In Working Condition Wheel Loader Location: Canada Learn More

Machine hours	3,500	KILOMETERS	N/A
YEAR	2008	BRAND	Caterpillar
LOCATION	Canada	MODEL	R1700G

Add to Wish List Add to Compare

Foremost 306430 6" Inch API Pin / 7.5" Inch Rod BECO Box Thread Shock Sub ($8,500 ex GST) (sale-ehub4406)

For Sale

$8,500.00

Make: Foremost Model: 306430 Pin: 6" Inch API Box Thread: 7.5" Inch Rod BECO Part Number: 322424 US Pat Number: 6332841 Serial Number: 1000166 Shock Sub Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Foremost
LOCATION	Western Australia	MODEL	306430 6" Inch API

Add to Wish List Add to Compare

Foremost 14-50-6353 4.5" Inch API Refurbished Shock Sub ($11,000 ex GST) (sale-ehub4405)

For Sale

$11,000.00

Make: Foremost Model: 14-50-6353 Pin: 4.5" Inch API Box Thread: 4.5" Inch API Part Number: 320316 Serial Number: 968176-2 - Refurbished Shock Sub Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Foremost
LOCATION	Western Australia	MODEL	14-50-6353 4.5" Inch API

Add to Wish List Add to Compare

Sandvik DE712 Track Mounted Drill Rig (FOR HIRE/RENT - POA) (hire-ehub4379)

For Hire

Make: Sandvik Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Track Mounted Drill Rig Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Sandvik
LOCATION	Queensland, Australia	MODEL	DE712

Add to Wish List Add to Compare

2017 Epiroc Rocket Boomer 282 Double Arm Drill Rig (POA) (sale-ehub4356)

For Sale

$0.00

Make: Epiroc Model: Rocket Boomer 282 Year: 2017 Hours: 6,610 Percussion Hours: 3,009 / 2,987 Electric Hours: 3,601 / 4,113 Drill: COP 1838 HD+ - Double Arm - Fixed Beams of 16' Foot Drill Rig Location: Peru Learn More

Machine hours	6,610	KILOMETERS	N/A
YEAR	2017	BRAND	Epiroc
LOCATION	Peru	MODEL	Rocket Boomer 282

Add to Wish List Add to Compare

2007 Terex Hi-Ranger TM105 32 Metre EWP Elevating Work Platform *Truck Is Not Included* ($57,000 ex GST) (sale-ehub4354)

For Sale

$57,000.00

Make: Terex Model: Hi-Ranger TM105 Year: 2007 Hours: 1,026 / 711 (PTO) Working Height: 105' Foot / 32 Metre Side Reach: 51' Foot / 15.5 Metre - 66kV Insulated Boom - Flashing Beacons - In Date until 12/2030 *Truck Is Not Included* Elevating Work Platform Location: Western Australia Learn More

Machine hours	1,026 / 711 (PTO)	KILOMETERS	N/A
YEAR	2007	BRAND	Terex
LOCATION	Western Australia	MODEL	Hi-Ranger TM105

Add to Wish List Add to Compare

Drilling Consumables Package (Open to Offers) (sale-ehub4349)

For Sale

$0.00

Includes; - 7x NMLC Bit and Reamers - 3x NMLC Bits - 2x NMLC TC Core Bit - 1x HMLC Used Bit and Reamer - 1x HMLC New S15 Core Bit - 1x HMLC New Reamer - 1x HMLC Used Core Bit - 1x Tri Cone 2 15/16" Inch - 1x Tri Cone 3 7/8" Inch - 1x HQ3 Bit Reamer Fordia S11/14 - 5x HQ3 Used IMP Bits - 2x HQ3 TC Core Bits - 1x PQ3 Near New IMP Core Bit - 1x C4 IMP Bit and Reamer - 1x NW IMP Shoe Bit - 1x NW TC Shoe Bit - 1x HQ Rod TC Shoe Bit - 2x NQ3 Near New IMP Core Bits - 3x NQ Reamers - 1x NQ Rod Reamer - 1x NQ New IMP Core Bit Hayden S14/15 - 1x HQ New Reamer - 1x HQ Near New Reamer - 1x New 3 7/8" Inch Drag Bit - 2x Near New 4 1/2" Inch Drag Bit - 1x NMLC New Hard Core S6 - 1x NMLC New Reamer - 1x NQ3 Hard Core S15 - 9x 2 Metre Used RC Rods - 1x Used 1.5 Metre RC Rod with Bit - 4x Worn Augers - 1x Used 4 1/2" Inch Bit - 1x New 4 1/2" Inch Bit - 1x 6 1/2" Inch Drag Bit - 1x 100 mm Tube Adapter - 1x 75 mm Tube Adapter - 2x 50 mm Tube Adapter Plus 50 mm Piston Sampler Drilling Consumables Package Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	See Description

Add to Wish List Add to Compare

2020 Wacker Neuson TH412 Telehandler with Forklift Attachment ($89,000 ex GST) (sale-ehub3386)

For Sale

$89,000.00

Make: Wacker Neuson Model: TH412 Year: 2020 Hours: Less than 500 Engine: Yanmar 3TNV80FT @ 25HP Chassis Operating Pressure: 5,510 PSI / 380 bar Hydraulic Operating Pressure: 3,190 PSI / 220 bar Payload Max: 1,250 kg Payload Lift Max: 1,250 kg Lift Bucket Swivel: 4,537 mm Dimensions Length: 3,944 mm (2,991 mm w/out Bucket) Width: 1,564 mm Height: 5,280 mm (1,995 mm Just Cab) Weight: 2,750 kg - Forklift Attachment - Side Shift - Air Conditioning / Heating & Ventilation - ROPS / FOPS tested with VSG safety window on right side - Front, Roof & Rear Wipers - Heated Rear Window - Tilt Display - Sun Shade - Bottle Holder - Storage Net - LED Work Lights (1x Front & 1x On Cab Roof) Telehandler Location: Western Australia Learn More

Machine hours	Less than 500	KILOMETERS	N/A
YEAR	2020	BRAND	Wacker Neuson
LOCATION	Western Australia	MODEL	TH412

Add to Wish List Add to Compare

2018 Exploration Drill Masters EDM 95K Track Mounted Drill Rig (POA) (sale-ehub4344)

For Sale

$0.00

Make: Exploration Drill Masters EDM Model: 95K Year: 2018 Hours: 32,431 Drill Head Hours: 32,431 Compressor Hours: 32,431 Onboard Air Pack: Sullair 1,150 CFM / 500 PSI Air Compressor - Spare Parts available (can provide a detailed list with pricing) - EDM MK2 Core Rod Feeder (For additional $USD350,000) Track Mounted Drill Rig Location: United States of America Learn More

Machine hours	32,431	KILOMETERS	N/A
YEAR	2018	BRAND	EDM
LOCATION	United States of America	MODEL	95K

Add to Wish List Add to Compare

3x Schramm 5001-4837 Matrix 4.5" Inch Reverse Circulation Sub Adapters (POA) (sale-ehub4338)

For Sale

$0.00

Make: Schramm Model: Matrix 4.5" Inch Part Number: 5001-4837 - Dual Wall Mineral Exploration Drilling Reverse Circulation - Crossover Connection for Pipe, Collars, Bits, Hammers, Stabilisers or Other Drilling Rig String Components Quantity: 3 Sub Adapter Location: United States of America Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Schramm
LOCATION	United States of America	MODEL	5001-4837 Matrix 4.5" Inch

Add to Wish List Add to Compare

140x Lengths of Foremost 4 1/2" Inch Class Drill Systems Reverse Circulation CTP Drill Pipe / Rod (POA) (sale-ehub4337)

For Sale

$0.00

Make: Foremost Type: 4 1/2" Inch Connector Tube Pipe (CTP) - Reverse Circulation OD: 4 1/2" Inch x 3 1/4" Inch ID (Approx.): 3 1/4" Inch (without inner tubes) - Currently has "BAD" Steel Inner Tubes Installed (Inner Tubes can be removed by pressing; with PIN down and push out BOX end) Quantity: 140 Drill Pipe / Rod Location: United States of America Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Foremost
LOCATION	United States of America	MODEL	4 1/2" Inch

Add to Wish List Add to Compare

Reverse Circulation Drilling Swivels Package (POA) (sale-ehub4336)

For Sale

$0.00

Suitable for Mineral Exploration with Ingersoll Rand T3W, Atlas Copco TH60 or Similar Includes; - Western Rubber 25CM-4 Top Swivel - Discharge Gooseneck - Side Air Inlet Swivel with Quill Reverse Circulation Drilling Swivels Package Location: United States of America Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	United States of America	MODEL	Reverse Circulation Drilling Swivels Package

Add to Wish List Add to Compare

3x Schramm 5001-4836 Reverse Circulation Sub Adapters (POA) (sale-ehub4335)

For Sale

$0.00

Make: Schramm Model: 5001-4836 Thread (Approx.): Matrix, Metzke, Remet - Marked 0512665 / 0450M-BAKRM-1 Special - Crossover Connector for Drill Pipe, Collars, Bits, Hammers, Stabilisers or Other Drilling Rig String Components Quantity: 3 Reverse Circulation Sub Adapter Location: United States of America Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Schramm
LOCATION	United States of America	MODEL	Reverse Circulation Sub Adapter

Add to Wish List Add to Compare

1984 Schramm T660 Rotadrill Drill Rig Mounted on Brigadier Truck with Drill Pipe (POA) (sale-ehub4333)

For Sale

$0.00

Rig Make: Schramm Model: T660 Rotadrill Year: 1984 Hours: 4,131 Air Compressor: GHH 750 CFM / 250 PSI @ 2,100 RPM Deck Engine: Detroit 8V92 Diesel Winch Pullback: 44,000 lbs - Caterpillar Water Injection System - Set Up as Top Head Air Rotary - 7 Rod Carousel - Hammer Oiler Truck Make: Brigadier Engine: Caterpillar 3208 Miles: 41,546 Transmission: 13 Speed GVW: 53,320 lbs FVW: 15,320 lbs RVW: 38,000 lbs Drill Pipe; - 4 1/2" Inch - 220' Foot Bottle Neck Truck Mounted Drill Rig Location: United States of America Learn More

Machine hours	4,131	KILOMETERS	41,546
YEAR	1984	BRAND	Schramm
LOCATION	United States of America	MODEL	T660 Rotadrill

Add to Wish List Add to Compare

600X Track Mounted Multipurpose Hydraulic Drill Rig (New Build - POA) (sale-ehub4326)

For Sale

$0.00

Model: 600X Engine: John Deere Tier 4F - Stage V - Model: 4045CI550 @ 173 HP Pull Down Force: 7,000 kg Retract Force: 10,000 kg Feed Down Speed: 0-23 m/min Feed Retract Speed: 0-13.5 m/min Feed Stroke: 2.1 m Mast Dumping: 950 mm Rod Rack Capacity: 100 ft AWJ + 100 ft NQ Auger Rack Capacity: 50 ft of 3 1/4" Inch Hollowed Augers Features; - Engine Leveler - Engine Controller Unit - Pulling/Carrier Winch - 3x Night Lights - 2x Mud Pumps; Progressive Cavity Pump & Piston Pump - High Capacity Winch & Wireline Winch - Double Rod Clamp Breakout System - Automatic SPT Hammer - 16 Speed Rotation Head - Driller Platform - Toolbox Optional Features; - 4x Camera CCTV System - DSE Power Unit Parameters - Drilling Parameters - JD (John Deere) Link Track Mounted Multipurpose Hydraulic Drill Rig Location: United Arab Emirates Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	United Arab Emirates	MODEL	600X

Add to Wish List Add to Compare

DE740 Drill Rig (POA) (sale-ehub4317)

For Sale

$0.00

Make/Model: DE740 Engine: Cummins QSB6.7 Inline 6 Cylinder Tier 3 Depth Capacity; TK56: 3.187 m B: 2.350 m TK66: 2.731 m N: 2 m TK76: 1.886 m H: 1.4 m P: 831 m Feed Force: 6.8 Tonne (15,000 lbf) Pull Force: 13.6 Tonne (30,000 lbf) Feed Length (Stroke): 3.45 m Speed Up & Down: 30 m/min Features; - "P" Size Chuck Drive C40 Rotation Head with Hollow Spindle and Stepless Speed Control - Telescoping Upper Mast - All Hydraulically Operated - Self-Propelled Drill Unit - Rod Spin Guard - 1x Rod Clamp can support; B, N, H, P and S Rod Sizes; 44.5 mm to 177.8 mm - Head Traverse System directly coupled to Rotation Head Carriage - Wireline Wiper and Safety Cut Out + Options Drill Rig Location: TBA (New Build - Built to Order) Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	TBA	MODEL	DE740

Add to Wish List Add to Compare

Search results for: 'foot revers r pop 2008 for spare'

AUSTRALIA WIDE SERVICE

REQUIRE ASSISTANCE - HAVE A QUESTION?

EQUIPMENT FOR HIRE OR FOR SALE