Search results for: 'force revers r pop 2007 for state'
- Related search terms
- state we enabled rated in bits
- state we enabled rate in bros
- state we enabled rate in bore
- state we enabled rate in base
- state export mph sale location
-
2024 Forward RC3 Track Mounted Water Well Drill Rig (POA) (sale-ehub4453)For Sale$0.00Make: Forward Model: RC3 Year: 2024 Hours: 128 Engine: Cummins 6BTA Drilling Capacity: 380 m Drilling Diameter: 10" Inches Drill Head Rotation: 0-120 RPM / 5,600 Nm Pull Back Force: 120 kN Hoist Capacity: 20 kN Feed Stroke: 3,400 mm Mast Height: 6,400 mm Mud Pump: 450 Litres per minute at 1,000 PSI Crawl Speed: 3 km/h Weight: 1,180 kg Dimensions: 6,400 x 2,250 x 400 - Remote Tramming - Jack Legs - Mast Tilt - Mast Pump Includes; - 150 Metres of Rods & Different Sized Bits - Settling Tank - Hoses Modifications; - P.R.D Dual Breakout 210 mm Diameter (Can be swung out of way to allow larger install) - Larger Hydraulic Pump Installed Track Mounted Water Well Drill Rig Location: Western Australia Learn MoreMachine hours 128
KILOMETERS N/A YEAR N/A BRAND Forward
LOCATION Western Australia
MODEL RC3
-
Kurth KB25 Track Mounted Rotary Drill Rig ($115,000 ex GST) (sale-ehub4450)For Sale$0.00Make: Kurth Model: KB25 Rotation Speed: 0-120 RPM Max. Torque: 5,000 Nm Stroke: 2,300 mm Max. Pullback Force: 48 kN Max. Feed Force: 32 kN Max. Casing Clamping Diameter: 273 mm Max. Casing Pullback Force: 150 kN Rotary Drive Travel Speed: 40m/min (max.) Rotary Drive Tilt Out Angle: 40 degrees from vertical - Set up for Shell & Auger - Drilling & Casing Clamp Range from 114 mm OD to 219 mm OD Drilling Capacity; Auger Drilling with Casings Ø 219/178 mm: 25-40 metres Hollow Stem Augers Ø 195/110 mm: 40 metres Direct Mud Rotary Drilling Ø 190 mm: 100 metres Down Hole Hammer Drilling Ø 150 mm: 100 metres Track Mounted Rotary Drill Rig Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL KB25
-
VB10 Track Mounted Dual Rotary Drill Rig ($409,500 ex GST) (sale-ehub4427)For Sale$409,500.00Model: VB10 Engine: Deutz TCD2012L04 4 Cylinder Working Pressure: Max. 350 Bar Torque (Inside Rods): 3,700 / 7,400 Speed: 120 / 60 RPM Torque (Outside Rods): 12,000 / 24,000 Speed: 54 / 27 RPM Max. Breaking Torque: 46,000 Nm Drill Pole; Pole Profile: 300 x 200 x 8 mm Pole Height: 7,190 mm Stroke: 3,600 mm Hook Load / Pulling Force (Chain): 120 kN / 245 kN Max. Contact Pressure (Chain): 60 kN Travelling Speed: Up to 40 m/min Max. Rod Length: 2 m Track Mounted Dual Rotary Drill Rig Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL VB10
-
2022 VersaDrill KmN1.4sm Track Mounted Core Drill Rig (POA) (sale-ehub4426)For Sale$0.00Make: VersaDrill Model: KmN1.4sm Year: 2022 Hours: 3,500 Depth Capacity: N Size @ 2,294 m (7,526 ft) Rotary Head Ratio: 1:2,33 Speed: 0 to 1,250 RPM Spindle Interior Dimension: 124 mm (4.9" Inches) Hydraulic Motor: 160 CC Variable Track Mounted Core Drill Rig Location: United States of America Learn MoreMachine hours 3,500
KILOMETERS N/A YEAR N/A BRAND Versadrill
LOCATION United States of America
MODEL KmN1.4sm
-
Foremost 306430 6" Inch API Pin / 7.5" Inch Rod BECO Box Thread Shock Sub ($8,500 ex GST) (sale-ehub4406)For Sale$8,500.00Make: Foremost Model: 306430 Pin: 6" Inch API Box Thread: 7.5" Inch Rod BECO Part Number: 322424 US Pat Number: 6332841 Serial Number: 1000166 Shock Sub Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Foremost
LOCATION Western Australia
MODEL 306430 6" Inch API
-
Foremost 14-50-6353 4.5" Inch API Refurbished Shock Sub ($11,000 ex GST) (sale-ehub4405)For Sale$11,000.00Make: Foremost Model: 14-50-6353 Pin: 4.5" Inch API Box Thread: 4.5" Inch API Part Number: 320316 Serial Number: 968176-2 - Refurbished Shock Sub Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Foremost
LOCATION Western Australia
MODEL 14-50-6353 4.5" Inch API
-
Sandvik DE712 Track Mounted Drill Rig (FOR HIRE/RENT - POA) (hire-ehub4379)For HireMake: Sandvik Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Track Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Queensland, Australia
MODEL DE712
-
Caterpillar CAT 994F Wheel Loader (POA) (sale-ehub4373)For Sale$0.00Make: Caterpillar Model: 994F Hours (Frame): 80,693 Hours (Engine): 19,769 Serial Number: 994FV44200214 Wheel Loader Location: United States of America Learn MoreMachine hours 19,769
KILOMETERS N/A YEAR N/A BRAND Caterpillar
LOCATION United States of America
MODEL 994F
-
2021 Caterpillar CAT 777G Dump Truck (POA) (sale-ehub4366)For Sale$0.00Make: Caterpillar Model: 777G Year: 2021 Hours: 7,000 - EPA Dump Truck Location: United States of America Learn MoreMachine hours 7,000
KILOMETERS N/A YEAR 2021
BRAND Caterpillar
LOCATION United States of America
MODEL 777G
-
2007 Terex Hi-Ranger TM105 32 Metre EWP Elevating Work Platform *Truck Is Not Included* ($57,000 ex GST) (sale-ehub4354)For Sale$57,000.00Make: Terex Model: Hi-Ranger TM105 Year: 2007 Hours: 1,026 / 711 (PTO) Working Height: 105' Foot / 32 Metre Side Reach: 51' Foot / 15.5 Metre - 66kV Insulated Boom - Flashing Beacons - In Date until 12/2030 *Truck Is Not Included* Elevating Work Platform Location: Western Australia Learn MoreMachine hours 1,026 / 711 (PTO)
KILOMETERS N/A YEAR 2007
BRAND Terex
LOCATION Western Australia
MODEL Hi-Ranger TM105
-
Drilling Consumables Package (Open to Offers) (sale-ehub4349)For Sale$0.00Includes; - 7x NMLC Bit and Reamers - 3x NMLC Bits - 2x NMLC TC Core Bit - 1x HMLC Used Bit and Reamer - 1x HMLC New S15 Core Bit - 1x HMLC New Reamer - 1x HMLC Used Core Bit - 1x Tri Cone 2 15/16" Inch - 1x Tri Cone 3 7/8" Inch - 1x HQ3 Bit Reamer Fordia S11/14 - 5x HQ3 Used IMP Bits - 2x HQ3 TC Core Bits - 1x PQ3 Near New IMP Core Bit - 1x C4 IMP Bit and Reamer - 1x NW IMP Shoe Bit - 1x NW TC Shoe Bit - 1x HQ Rod TC Shoe Bit - 2x NQ3 Near New IMP Core Bits - 3x NQ Reamers - 1x NQ Rod Reamer - 1x NQ New IMP Core Bit Hayden S14/15 - 1x HQ New Reamer - 1x HQ Near New Reamer - 1x New 3 7/8" Inch Drag Bit - 2x Near New 4 1/2" Inch Drag Bit - 1x NMLC New Hard Core S6 - 1x NMLC New Reamer - 1x NQ3 Hard Core S15 - 9x 2 Metre Used RC Rods - 1x Used 1.5 Metre RC Rod with Bit - 4x Worn Augers - 1x Used 4 1/2" Inch Bit - 1x New 4 1/2" Inch Bit - 1x 6 1/2" Inch Drag Bit - 1x 100 mm Tube Adapter - 1x 75 mm Tube Adapter - 2x 50 mm Tube Adapter Plus 50 mm Piston Sampler Drilling Consumables Package Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL See Description
-
2020 Wacker Neuson TH412 Telehandler with Forklift Attachment ($89,000 ex GST) (sale-ehub3386)For Sale$89,000.00Make: Wacker Neuson Model: TH412 Year: 2020 Hours: Less than 500 Engine: Yanmar 3TNV80FT @ 25HP Chassis Operating Pressure: 5,510 PSI / 380 bar Hydraulic Operating Pressure: 3,190 PSI / 220 bar Payload Max: 1,250 kg Payload Lift Max: 1,250 kg Lift Bucket Swivel: 4,537 mm Dimensions Length: 3,944 mm (2,991 mm w/out Bucket) Width: 1,564 mm Height: 5,280 mm (1,995 mm Just Cab) Weight: 2,750 kg - Forklift Attachment - Side Shift - Air Conditioning / Heating & Ventilation - ROPS / FOPS tested with VSG safety window on right side - Front, Roof & Rear Wipers - Heated Rear Window - Tilt Display - Sun Shade - Bottle Holder - Storage Net - LED Work Lights (1x Front & 1x On Cab Roof) Telehandler Location: Western Australia Learn MoreMachine hours Less than 500
KILOMETERS N/A YEAR 2020
BRAND Wacker Neuson
LOCATION Western Australia
MODEL TH412
-
2018 Exploration Drill Masters EDM 95K Track Mounted Drill Rig (POA) (sale-ehub4344)For Sale$0.00Make: Exploration Drill Masters EDM Model: 95K Year: 2018 Hours: 32,431 Drill Head Hours: 32,431 Compressor Hours: 32,431 Onboard Air Pack: Sullair 1,150 CFM / 500 PSI Air Compressor - Spare Parts available (can provide a detailed list with pricing) - EDM MK2 Core Rod Feeder (For additional $USD350,000) Track Mounted Drill Rig Location: United States of America Learn MoreMachine hours 32,431
KILOMETERS N/A YEAR 2018
BRAND EDM
LOCATION United States of America
MODEL 95K
-
2025 Geoprobe 7822DT Track Mounted Drill Rig (POA) (sale-ehub4343)For Sale$0.00Make: Geoprobe Model: 7822DT Year: 2025 Hours: 319 - Geoprobe GH63 Hammer - Tethered and Wireless Remote - 4 Speed Head (4,000 ft-lbf @ 750 RPM) - Dual Winch Kit - 3' Mast Extension - 7" Inch Breakout Kit - H Feed Control / CPT Valve Kit - 140 lbs Auto Drop Hammer - Anvil Hanger - ADH Drive Cap AWJ, Pin Down - 5' Extruder with Moyno 3L6 - Helper Side - 53" Inch Toolbox - Open Storage Box - Drop Rack System w/ Rod Rack - Yoke Vise & Mounting Bracket - High Speed Water Swivel w/ Float - Float Sub NWJ Pin Assembly Track Mounted Drill Rig Location: United States of America Learn MoreMachine hours 319
KILOMETERS N/A YEAR N/A BRAND Geoprobe Systems
LOCATION United States of America
MODEL 7822DT
-
2007 Schramm T685WS Drill Rig Mounted on Sterling LT9500 Truck (POA) (sale-ehub4339)For Sale$0.00Rig Make: Schramm Model: T685WS Year: 2007 Hours: 1,624 Engine: MTU 12V-2000 Pullback: 74,000 lbs Air Compressor: Sullair 1,350 CFM / 350 PSI to 1,150 CFM / 500 PSI - Winch - Hammer Lubricator - Water Injection with Soap Pump - Set Up for 25x Lengths of 4 1/2" Inch Drill Pipe - 6" Inch & 8" Inch Hammers - Diverters - Subs - Wrenches - Tooling, etc. Truck Make: Sterling Model: LT9500 Miles: 1,729 Truck Mounted Drill Rig Location: United States of America Learn MoreMachine hours 1,624
KILOMETERS 1,729
YEAR 2007
BRAND Schramm
LOCATION United States of America
MODEL T685WS
-
3x Schramm 5001-4837 Matrix 4.5" Inch Reverse Circulation Sub Adapters (POA) (sale-ehub4338)For Sale$0.00Make: Schramm Model: Matrix 4.5" Inch Part Number: 5001-4837 - Dual Wall Mineral Exploration Drilling Reverse Circulation - Crossover Connection for Pipe, Collars, Bits, Hammers, Stabilisers or Other Drilling Rig String Components Quantity: 3 Sub Adapter Location: United States of America Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Schramm
LOCATION United States of America
MODEL 5001-4837 Matrix 4.5" Inch
-
140x Lengths of Foremost 4 1/2" Inch Class Drill Systems Reverse Circulation CTP Drill Pipe / Rod (POA) (sale-ehub4337)For Sale$0.00Make: Foremost Type: 4 1/2" Inch Connector Tube Pipe (CTP) - Reverse Circulation OD: 4 1/2" Inch x 3 1/4" Inch ID (Approx.): 3 1/4" Inch (without inner tubes) - Currently has "BAD" Steel Inner Tubes Installed (Inner Tubes can be removed by pressing; with PIN down and push out BOX end) Quantity: 140 Drill Pipe / Rod Location: United States of America Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Foremost
LOCATION United States of America
MODEL 4 1/2" Inch
-
Reverse Circulation Drilling Swivels Package (POA) (sale-ehub4336)For Sale$0.00Suitable for Mineral Exploration with Ingersoll Rand T3W, Atlas Copco TH60 or Similar Includes; - Western Rubber 25CM-4 Top Swivel - Discharge Gooseneck - Side Air Inlet Swivel with Quill Reverse Circulation Drilling Swivels Package Location: United States of America Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION United States of America
MODEL Reverse Circulation Drilling Swivels Package
-
3x Schramm 5001-4836 Reverse Circulation Sub Adapters (POA) (sale-ehub4335)For Sale$0.00Make: Schramm Model: 5001-4836 Thread (Approx.): Matrix, Metzke, Remet - Marked 0512665 / 0450M-BAKRM-1 Special - Crossover Connector for Drill Pipe, Collars, Bits, Hammers, Stabilisers or Other Drilling Rig String Components Quantity: 3 Reverse Circulation Sub Adapter Location: United States of America Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Schramm
LOCATION United States of America
MODEL Reverse Circulation Sub Adapter
-
2004 Schramm T555 Drill Rig Mounted on 2004 Sterling Truck (POA) (sale-ehub4334)For Sale$0.00Rig Make: Schramm Model: T555 Year: 2004 Hours: 10,445 Engine: Caterpillar C15 565 HP Diesel Torque: 75,348 lbs @ 0-131 RPM Pullback: 40,000 lbs Pulldown: 30,000 lbs Air Compressor: Sullair 1,050 CFM / 350 PSI - Engine Preheater - FMC Bean Water Injection Pump - Pipe Trough - 300 Feet of Drill Pipe - Stabiliser - DTH Hammer - Table Bushings Truck Make: Sterling Year: 2004 Miles: 29,972 Engine: Mercedes Benz 450 HP Diesel Truck Mounted Drill Rig Location: United States of America Learn MoreMachine hours 10,445
KILOMETERS 29,972
YEAR 2004
BRAND Schramm
LOCATION United States of America
MODEL T555
Filter