Search results for: 'hire for siev in del rail bean'

Set Ascending Direction

76 items

Page
per page
Did you mean
hole for siev in del rail bean
hire for size in del rail bean
Related search terms
hire for sale texas
hire for sale statesboro ga
hire to enabl 100 hz and adaptive sand
hire for sale in johnson core tx
hire for sale in gainesville tx
  1. Revathi T650WM Drill Rig Mounted on 2005 Volvo FM9 Truck ($350,000 ex GST) (sale-ehub4383)
    For Sale
    $350,000.00
    Rig Make: Revathi Model: T650WM - Air Compressor - FMC Bean Pump - Duplex Mud Pump - Fire Extinguisher Truck Make: Volvo Model: FM9 Year: 2005 KM's: 362,000 Type: 10x4 Truck Mounted Drill Rig Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS

    362,000

    YEAR

    2005

    BRAND

    N/A

    LOCATION

    Queensland, Australia

    MODEL

    T650WM

  2. Sandvik DE712 Track Mounted Drill Rig (FOR HIRE/RENT - POA) (hire-ehub4379)
    For Hire
    Make: Sandvik Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Track Mounted Drill Rig Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    Sandvik

    LOCATION

    Queensland, Australia

    MODEL

    DE712

  3. 3x EDM 2000 Drill Rigs Mounted on International 8x4 Trucks (POA) (sale-ehub4347)
    For Sale
    $0.00
    Rig Make: EDM Model: 2000 Year: 2010 (2x) & 2012 Engine: Cummins QSM-11 Tier 3 Diesel Pullback: 40,000 Main Winch: 40,000 Max. Tophead Torque: 9,000 (800 Torque @ 1,500 RPM) - Set Up for Exploration Drilling (5-150 RPM Tophead in Low Gear) - Core Drilling Applications (150-1,500 RPM Tophead in High Gear) - No Air Compressor - No Mud Pump - FMC (Bean) Water Pump (140 l/min or 35 GPM) - Sliding Angle Mast (Up to 45 Degrees with 2,000 mm Mast Dump) - High Speed Wireline Winch for Coring - Hydraulic Rod Break Out - Rod Spinner with 11,000 Breakout Torque Quantity: 3 Approx. Drill Depths; Dual Tube RC Pipe: 350 m BQ Coring Pipe: 2,800 m NQ Coring Pipe: 2,000 m HQ Coring Pipe: 1,500 m PQ Coring Pipe: 1,100 m Rig Truck Make: International Model: 7601 (2010) / 7500 (2010) / 7600 (2012) Year: 2019 (2x) & 2012 Type: 8x4 Truck Mounted Drill Rig Location: Chile Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR

    2010

    BRAND

    EDM

    LOCATION

    Chile

    MODEL

    2000

  4. 2004 Schramm T555 Drill Rig Mounted on 2004 Sterling Truck (POA) (sale-ehub4334)
    For Sale
    $0.00
    Rig Make: Schramm Model: T555 Year: 2004 Hours: 10,445 Engine: Caterpillar C15 565 HP Diesel Torque: 75,348 lbs @ 0-131 RPM Pullback: 40,000 lbs Pulldown: 30,000 lbs Air Compressor: Sullair 1,050 CFM / 350 PSI - Engine Preheater - FMC Bean Water Injection Pump - Pipe Trough - 300 Feet of Drill Pipe - Stabiliser - DTH Hammer - Table Bushings Truck Make: Sterling Year: 2004 Miles: 29,972 Engine: Mercedes Benz 450 HP Diesel Truck Mounted Drill Rig Location: United States of America Learn More
    Machine hours

    10,445

    KILOMETERS

    29,972

    YEAR

    2004

    BRAND

    Schramm

    LOCATION

    United States of America

    MODEL

    T555

  5. 1996 UDR650 Drill Rig Mounted on Mack Quantum Twin Steer Truck ($269,000 ex GST) (sale-ehub4076)
    For Sale
    $269,000.00
    Drill Rig Make: UDR Model: 650 Year: 1996 Engine: Rebuilt 4 Cylinder Detroit - Rebuilt Drill Head - Main Ram Rebuilt - New Holdback and Microfeed Valves - New Cameron Gauge - New Main Winch Hydraulic Motor - New Secondary Valve Bank - Jack Legs Resealed and New Piston Seals - New Hydraulic Charge Pump - Hydraulic Pumps tested and making full pressure - Bean Pump Pistons just replaced - New Mast Slides - Outrigger Front Jack Legs - Spare Pulldown Ropes (New) - Rebushed Foot Clamps with New HQ and PQ Slips (NQ Slips included too) Truck Make: Mack Model: Quantum 435 HP Twin Steer Truck Mounted Drill Rig Location: New South Wales, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR

    1996

    BRAND

    UDR

    LOCATION

    New South Wales, Australia

    MODEL

    650

  6. 2020 Atlas Copco E-Air V1100 VSD Skid Mounted Air Compressor (FOR HIRE/RENT - POA) (hire-ehub4266)
    For Hire
    Make: Atlas Copco Model: E-Air V1100 VSD Year: 2020 Hours: 2,405 Skid Mounted Air Compressor Location: Queensland, Australia Learn More
    Machine hours

    2,405

    KILOMETERS N/A
    YEAR N/A BRAND

    Atlas Copco

    LOCATION

    Queensland, Australia

    MODEL

    E-Air V1100 VSD

  7. 2023 Black Diamond HJGW400 Track Mounted Geothermal Drill Rig (FOR HIRE/RENT - POA) (hire-ehub4258)
    For Hire
    Make: Black Diamond Model: HJGW400 Year: 2023 Hours: 260 Engine: Cummins 4BTA Bean Pump: AD413, Max PSI: 550, Max RPM: 500, KW: 2.4, KPA: 3,792, HP: 3.2, GPM: 9, LPM: 34 Rod Bin: 80 m Mayhew Jr 3M Rods (Near New) Capability: 200M with 6” Hammer Hole Diameter: 110 - 305 mm Max Drilling Depth: 400 m Rotation Torque: 3,500 Nm Rotation Speed: 0-200 RPM Feeding Capacity: 100 Kn Feed Stroke: 200 Kn Drill Rod Length: 6 m Travel Speed: 2.5 km/h Dimensions (L x W x H - Transportation): 6,700 mm x 1,800 mm x 2,650 mm Dimensions (Working): 4,350 mm x 2,850 mm x 7,320 mm Weight: 9.5 Tonne Track Mounted Geothermal Drill Rig Location: Queensland, Australia Learn More
    Machine hours

    260

    KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Queensland, Australia

    MODEL

    Black Diamond HJGW400

  8. 2023 Black Diamond HJGW400 Track Mounted Geothermal Drill Rig ($145,000 ex GST) (sale-ehub4258)
    For Sale
    $145,000.00
    Make: Black Diamond Model: HJGW400 Year: 2023 Hours: 260 Engine: Cummins 4BTA Bean Pump: AD413, Max PSI: 550, Max RPM: 500, KW: 2.4, KPA: 3,792, HP: 3.2, GPM: 9, LPM: 34 Rod Bin: 80 m Mayhew Jr 3M Rods (Near New) Capability: 200M with 6” Hammer Hole Diameter: 110 - 305 mm Max Drilling Depth: 400 m Rotation Torque: 3,500 Nm Rotation Speed: 0-200 RPM Feeding Capacity: 100 Kn Feed Stroke: 200 Kn Drill Rod Length: 6 m Travel Speed: 2.5 km/h Dimensions (L x W x H - Transportation): 6,700 mm x 1,800 mm x 2,650 mm Dimensions (Working): 4,350 mm x 2,850 mm x 7,320 mm Weight: 9.5 Tonne Track Mounted Geothermal Drill Rig Location: Queensland, Australia Learn More
    Machine hours

    260

    KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Queensland, Australia

    MODEL

    Black Diamond HJGW400

  9. FMC L1122D Hydraulic Skid Mounted Mud Pump (FOR HIRE/RENT - POA) (hire-ehub4250)
    For Hire
    Make: FMC Model: L1122D Engine: Yanmar 4TNV Rated Pressure: 1,000 PSI Design Flowrate: 50 US GPM - Linde Hydraulic Pump (Coupled to the Diesel via Adaptor) - Linde Hydraulic Motor (Driving FMC Pump) - Flexible coupling between Pump and Hydraulic Motor (Comes with Guard) - Oil Cooler (Comes with Cooling Oil Tank) - Boart Longyear Pressure Relief Valve (Adjustable) - Rated up to 1,100 PSI - Hydac 1 Litre Bladder Accumulator - Maquarrie Control Panel - Structural Steel Base with Lifting Eyes - Battery Skid Mounted Mud Pump Location: New South Wales, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    FMC

    LOCATION

    New South Wales, Australia

    MODEL

    L1122D

  10. UDR1000 Drill Rig Mounted on International Acco T2650 8x4 Truck ($313,500 ex GST) (sale-ehub4242)
    For Sale
    $313,500.00
    Rig Make: UDR Model: 1000 Hours: 270 (Since Engine Rebuild) Engine: Detroit GM 6V-71 (Completely Rebuilt) - Head Rebuilt, All New Selectors, Gear Train, Bearings and Upgraded to Splined Output Spindle and Shaft (17 Hours used since) - Genuine Sandvik Parts Used - Hydraulic Motor tested (when apart and in good condition) - No Cylinder leaks - Lots of Hoses replaced - Slight leak from Control Panel - Good gauges and spool valves - Hydraulic Tank repaired, cleaned, and new filters and new oil (12 hours ago) - Bean Pump has new fluid end and in good condition - Table Modified to accept 400 mm Casing and running 300 mm Square Slips Plate - Original UDR Table available - Rod Safety Cage Included Truck Make: International Model: Acco T2650 Engine: Cummins 350 Big Cam Transmission: 18 Speed Road Ranger Type: 8x4 - No Oil Leaks - Lots spent for Rego - Cab has minimal rust - Tyres New 3 years ago and done 7,000 km's since Truck Mounted Drill Rig Location: South Australia Learn More
    Machine hours

    270 (Since Rebuild)

    KILOMETERS N/A
    YEAR N/A BRAND

    UDR

    LOCATION

    South Australia

    MODEL

    1000

  11. 2012 Refurbished Mobile Drill B37 Sonic + Conventional Track Mounted Drill Rig ($419,000 ex GST) (sale-ehub4223)
    For Sale
    $419,000.00
    Make: Mobile Drill Model: B37 Year: 2012 Refurbished Year: 2025 (Comprehensively Rebuilt & Upgraded) Hours: 1,830 Engine: John Deere 4045TF285 Diesel Engine @ 99 HP Feed Stroke: 4 Metres with 15,700 lb Retract Force Rod Pull: 6 Metres Haul/Wireline/Jib Winch: 8,500 lb Front Mounted Recovery Winch: 20,000 lb Track Base: Remote Controlled MT-20 with Engineered FOPS for operator safety Rebuild & Upgrade; - Traverse Assembly & Traverse Box replaced and upgraded - New Toa-Tone SP8000 Sonic Drill Head (Oscillation Head) - New Hydrovane Compressor - New Tracks for improved mobility and stability - Upgraded Spindle Attachment - Full Service Completed with regular servicing history maintained Includes; - Dump Mast - Triple Clamp with Make & Break - Auto SPT Hammer - Bean W1122D Pump - Caterpillar CAT 430 Injection Pump - 10 Speed Mobile Drill Head - 30 Metres Sonic Tooling (140 mm Casing / 115 m Barrel) - Spares + Consumables - Upgraded Sonic Tooling to Boart Longyear standard Track Mounted Sonic + Conventional Drill Rig Location: Queensland, Australia Learn More
    Machine hours

    1,830

    KILOMETERS N/A
    YEAR

    2012

    BRAND

    Mobile Drill

    LOCATION

    Queensland, Australia

    MODEL

    B37

  12. Weir MHD-100HV Highwall Pump Unit (FOR HIRE/RENT - POA) (hire-ehub4198)
    For Hire
    Make: Weir Minerals Model: MHD-100HV Rated RPM: 186 kW @ 2,200 RPM Suction Diameter: 150 mm Discharge Diameter: 200 mm Suction Flange: 406 OD x 200 ID 8 Holes 21 Dia. On 356 PCD Discharge Flange: 368 OD x 150 ID 8 Holes 21 Dia. On 324 PCD - Hydraulic Powered Highwall Pump Unit Location: Western Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Western Australia

    MODEL

    MHD-100HV

  13. New Holland B115B Backhoe (FOR HIRE/RENT - POA) (hire-ehub4154)
    For Hire
    Make: New Holland Model: B115B Backhoe Location: New South Wales, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    New Holland

    LOCATION

    New South Wales, Australia

    MODEL

    B115B

  14. 2020 Drill Techniques GM-2GI Hydraulic Jack Up Grout Unit (FOR HIRE/RENT - POA) (hire-ehub4149)
    For Hire
    Make: Drill Techniques Model: GM-2GI Year: 2020 Height: 3.5 Metres Tare: 4,000 kg Hydraulic Jack Up Grout Unit Location: New South Wales, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    Drilling Techniques

    LOCATION

    New South Wales, Australia

    MODEL

    GM-2GI

  15. 15x 15,000 Litre Above Ground Waste Sumps / Tanks (FOR HIRE/RENT - POA) (hire-ehub4147)
    For Hire
    Capacity: 15,000 Litre Quantity: 15 Above Ground Waste Sumps / Tanks Location: New South Wales, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    New South Wales, Australia

    MODEL

    15,000 Litre

  16. Air Core Drill Rig Mounted on 2014 Hino GT 4x4 Truck + Spares ($250,000 ex GST) (sale-ehub4127)
    For Sale
    $250,000.00
    Air Core Drill Rig - New Comp Rotation Head - Deck Engine - Main Feed Ram - Radiator Hydraulic Pump - Tilting Rod Bin - Onboard Air Compressor Hours: 100 Approx. Compressor Capacity: 600 CFM / 230 PSI - Cradle for Cyclone Pump points for Booster Bean Pump - Dump Mast - Has been water boring for the last 5 years - Too many spares to list Truck Make: Hino Model: GT Year: 2014 KM's: 64,000 Type: 4x4 Truck Mounted Drill Rig Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS

    64,000

    YEAR

    2014

    BRAND

    Hino

    LOCATION

    Queensland, Australia

    MODEL

    Truck: GT

  17. FMC1622 Bean Mud Pump Parts (POA) (sale-ehub4125)
    For Sale
    $0.00
    Type: FMC1622 Bean Mud Pump Parts *For more information, contact us* Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    FMC

    LOCATION

    Queensland, Australia

    MODEL

    1622

  18. Annular Diverter (FOR HIRE/RENT - POA) (hire-ehub4126)
    For Sale
    $0.00
    Sizes: 3" Inch / 4" Inch / 5" Inch Working Pressure: 2,500 PSI - Basic Hard Shut in Nitrile Bladder - Wireline Stripper - Hydraulic Activator - Hand Pump Activator - All Hoses Burst Protection or Fire Protected - Zone One Hoses are Coflexip and Armour Plated - Casing Adaptor to be purchased Annular Diverter Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Queensland, Australia

    MODEL

    3" / 4" / 5" Inch

  19. 600 GPM Shale Shaker Mounted on Jack Up Rod Sloop (FOR HIRE/RENT - POA) (hire-ehub4125)
    For Hire
    - Fully Hydraulically Operated - No Electrics - Various API Screen Sizes available - 600 GPM Jack Up Rod Sloop Mounted Shale Shaker Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Queensland, Australia

    MODEL

    600 GPM

  20. HT400 Skid Mounted Triplex Mud Pump (FOR HIRE/RENT - POA) (hire-ehub4124)
    For Hire
    Model: HT400 Engine: Cummins Transmission: Alison Gearbox - Variable Speed - 450 to 500 GPM Skid Mounted Triplex Mud Pump Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Queensland, Australia

    MODEL

    HT400

Set Ascending Direction

76 items

Page
per page