Search results for: 'hire for size in litre fuel'

- BOP Hoses - 2 3/8" Inch Inside BOP - 2 7/8" Inch Inside BOP - Choke Manifold - 2 3/8" Inch Kelly Clock - 2 7/8" Inch Kelly Clock - 2 3/8" Inch IBOP - 2 7/8" Inch IBOP - Koomey - Poor Boy Degasser - Test Stump - 7 1/16" Inch 3,000 PSI BOP Pipe Rams - 7 1/16" Inch BOP Blind Rams - Pipe Ram Blocks for 7 1/16" Inch BOP Variable also 3 1/2" Inch & 4 1/2" Inch Blind Ram Blocks for 7 1/16" Inch BOP - 7 1/16" Inch BOP Annular Preventer - 3 Station Sized to run BOP Stack above BOP Actuator - 1x Set of Hydraulic Hoses to connect Actuator with BOP Stack - 2 1/16" Inch 3,000 PSI Manual Operated HCR Valve - 3x 2 1/16" Inch 3,000 PSI Manual Operated Shut Off Valve - 7 1/16" Inch 3,000 PSI with 2 1/16" Inch Side Outlets Drilling Spool - 2 Channel 3,000 PSI 2 1/16" Inch Choke Manifold - 2x 6 Metre + 3,000 PSI 2 1/16" Inch Connect to HCR and Choke Flexible Choke Line - 2x BOP Starter Flange to suit Lower Drilling Spool to make up onto PWT - 3x Sets of all seal rings needed for coupling up the BOP Stack BOP Equipment Package Location: New South Wales, Australia Learn More

Drill Rig Make: Thor Year: 2007 Hours: 1,905 Air Compressor: 600 CFM / 350 PSI Max. Diameter Depth: 130 mm Max. Aircore Depth: 150 mm Wheel Base: MB 6x6 Drill Angles: 55 to 90 degrees - 3 Axle SPV (No Load Over Axle Mass Limits) Rig Truck Make: Mercedes Benz Model: Actros 3341A Year: 2006 Engine: 54194500455057 VIN: WDB9301832L123007 Type: 6x6 GVM: 33,000 kg Support Truck Make: Tatra Year: 2007 Engine Number: T3C92881608002752 VIN: TNU28PR257KO42431 Water Capacity: 2,500 Litres Fuel Capacity: 4,500 Litres - 3 Axle Rigid Vehicle (No Trailer over 4.5 Tonne Gross) Pig Trailer Make: Park Body Builders Year: 2008 VIN: 6T9T23WA18017E011 - 1 Axle Trailer / Semi-Trailer Truck Mounted Drill Rig Water & Fuel Support Truck Location: Western Australia Learn More

Drill Rig Hours: 457 Engine: Perkins 4.236 Air Compressor: Sullair 600 CFM / 200 PSI Air Compressor Engine: Caterpillar CAT 3208 @ 250 HP Compressor Hours: 29 Drilling Method: Air Core & RAB Drilling Depth: 120 m Drilling Angles: 55 to 90 degrees Drill Rod Specifications: 3" Inch Air Core Additional Equipment; - Dump Mast - 4 Metre Head Travel - Auto Rod Spinners - Automatic Brake Outs - Onboard Cyclone - Water Injection Dust Suppression Truck Make: Hino Model: GT1J Series 2 Year: 2007 KM's: 13,264 GVM: 13,000 kg GCM: 21,000 kg Support Truck Make: Hino Model: GT 8J (GT 1322) Year: 2008 KM's: 83,514 GVM: 13,000 kg GCM: 21,000 kg Water Capacity: 2,500 Litres Fuel Capacity: 4,500 Litres Truck Mounted Drill Rig Tray Top Water & Fuel Support Truck Location: Western Australia Learn More

Drill Rig Make: KL Model: 150 Year: 1996 Hours: 8,120 Engine: Cummins Air Compressor: 800 CFM / 280 PSI Drilling Method: Air Core & RAB Drilling Depth: 120 m Drilling Angles: 55 to 90 degrees Drill Rod Specifications: 3" Inch Air Core / 3.5" Inch RC Rods (Slimline RC) Mounted: Morooka MST-2500 with Mercedes Benz Engine Serial Number: 95/016 Additional Equipment; - Dump Mast - 4 Metre Head Travel - Auto Rod Spanners - Automatic Brake Outs - Onboard Cyclone - Water Injection Dust Suppression Dimensions; Height: 3 m Length: 6 m Width: 3 m Support Truck Make: Iveco Year: 2011 Type: 4x4 Water Capacity: 2,500 Litres Fuel Capacity: 4,500 Litres Track Mounted Drill Rig Bulk Water & Fuel Support Truck Location: Western Australia Learn More

Make: VersaDrill Model: KmN1.4sm Year: 2022 Hours: 3,500 Depth Capacity: N Size @ 2,294 m (7,526 ft) Rotary Head Ratio: 1:2,33 Speed: 0 to 1,250 RPM Spindle Interior Dimension: 124 mm (4.9" Inches) Hydraulic Motor: 160 CC Variable Track Mounted Core Drill Rig Location: United States of America Learn More

Make: Gardner Denver Type: 5x6 Engine: Kubota V3300 4 Cylinder Water Cooled - Diesel Driven - Manual Clutch - Belt Drive - Pulsation Dampener - OTECO Pin Pressure Valve - 200 Litre Fuel Tank Dimensions; Length: 2,950 Width: 1,500 Height: 2,300 Weight: 2.4 Tonne Skid Mounted Duplex Mud Pump Location: Queensland, Australia Learn More

Make: Gardner Denver Type: 5x6 Engine: Kubota V3300 4 Cylinder Water Cooled - Diesel Driven - Manual Clutch - Belt Drive - Pulsation Dampener - OTECO Pin Pressure Valve - 200 Litre Fuel Tank Dimensions; Length: 2,950 Width: 1,500 Height: 2,300 Weight: 2.4 Tonne Skid Mounted Duplex Mud Pump Location: Queensland, Australia Learn More

Capacity: 14,000 Litre Pump: Stalker 80HL - Sand Blasted and Painted - Water Cannon - Spray Bars Water Truck Body Location: Western Australia Learn More

Model: Bowen Size: 118 Gearench PUVTH: 118 BO Petol Push Up Visetong Location: Western Australia Learn More

Make: Regan Torus Size: 7 1/6" Inch 3K PSI: 1,500 / 3,000 Annular BOP Location: Queensland, Australia Learn More

Model: Single Ram PSI: 3,000 Bore Size: 11" Inch Temp Class: T-20/250 Dimensions: 82.5" x 29.8" x 22.6" Weight: 3,813 lb Blowout Preventer BOP Location: Queensland, Australia Learn More

Make: Sandvik Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Track Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Schramm Model: AD400AC Year: 2012 Hours: 10,600 Mast Top Head Travel: 4.7 m Mast Slide (Dump): 2.38 m Pullback Capacity: 13,607 kg (30,000 lb) - Rod Loader with 120 Metre Capacity of 3.5" Inch x 3 Metre RC Rods (Rods Not Included) - FMC EO413 Water Injection Pump (82 LPM @ 48 Bar / Max Pressure: 103 Bar) - Rotary Head (0-146 RPM / 6,022 Nm (4,442 ft lb) - 800 Litre Fuel Tank - 1,000 Litre Water Tank Refurbishments; - All Hydraulic Pumps fully reconditioned (Only have less than 4,000 hours) - Compressor fully reconditioned (Less than 4,000 hours) - Complete Mast changed (Less than 4,000 hours) - Engine & Hydraulic Cooler (Less than 4,000 hours) - CAT 3406 Engine (10,600 hours) Fully Reconditioned & In stock, can arrange to fit to rig for extra - Sullair Air Compressor 20/12 H 1,150 CFM / 1,800 RPM to 1,350 CFM / 1,800 RPM (Max Discharge Pressure: 500 PSI @ 1,150 CFM & 350 PSI @ 1,350 CFM) - Fully Reconditioned (Little less than 8,000 hours) Track Mounted Drill Rig Location: New Caledonia Learn More

Make: AFHTechFLOW Package Type: Gas Heating & Pressure Regulating Skid Application: Fuel gas conditioning for gas engine / generator Year: October 2014 Fluid: Natural Gas / Fuel Gas Typical End Use: GE Jenbacher Gas Generator Fuel Gas Train Electrical Supply: 415 V, 3-phase, 50 Hz Heater Power Load: ~11 kW Gas Inlet Connection: Flanged pipeline inlet Gas Outlet Connection: Flanged connection to engine gas train Drains: Heater vessel drain Relief: PSVs vented to atmosphere Earthing: Dedicated skid earth lug Nominal Gas Flow: 330 Nm³/hr Maximum Flow Rate: 330 Nm³/hr Inlet Pressure (Operating): 35 – 90 barg Inlet Pressure (Design / MAOP): 102 barg (upstream of regulator PRV2301) Outlet Pressure (Operating): 4 barg Inlet Temperature: 2 – 60 °C Outlet Temperature: 0 – 40 °C Design Temperature Range: -15 to +60 °C Gas Quality Assumption: Pipeline Quality Natural Gas Gas Heating System; - Electric gas heater, 10.8 kW - Explosion-protected heater suitable for Zone 1 - Carbon steel pressure vessel heater housing - 100 NB, Class 600 - Designed to AS 1210 PT100 RTD temperature elements; - Element sheath over-temperature protection - Heater outlet temperature control Thyristor-controlled heater system; - Control panel supplied separately for non-hazardous area installation - Heater pressure safety relief valve Pressure Control & Safety; - Primary pressure regulator (carbon steel body) - Over-pressure shut-off valve with fracture disk - Pressure safety relief valve (PSV) - Pressure gauges with block and bleed valves - Manual isolation ball valves (Class 800) Gas Filtration & Separation; - Cyclone separator for liquid droplet removal - Particle filter rated >3 µm - Designed to prevent condensate and solids entering engine gas train Fuel Gas Conditioning Skid Location: Queensland, Australia Learn More

Make/Model: DE740 Engine: Cummins QSB6.7 Inline 6 Cylinder Tier 3 Depth Capacity; TK56: 3.187 m B: 2.350 m TK66: 2.731 m N: 2 m TK76: 1.886 m H: 1.4 m P: 831 m Feed Force: 6.8 Tonne (15,000 lbf) Pull Force: 13.6 Tonne (30,000 lbf) Feed Length (Stroke): 3.45 m Speed Up & Down: 30 m/min Features; - "P" Size Chuck Drive C40 Rotation Head with Hollow Spindle and Stepless Speed Control - Telescoping Upper Mast - All Hydraulically Operated - Self-Propelled Drill Unit - Rod Spin Guard - 1x Rod Clamp can support; B, N, H, P and S Rod Sizes; 44.5 mm to 177.8 mm - Head Traverse System directly coupled to Rotation Head Carriage - Wireline Wiper and Safety Cut Out + Options Drill Rig Location: TBA (New Build - Built to Order) Learn More

Make: Iveco Model: Acco 2350G Year: 1993 KM's: 221,000 Engine: Cummins 6 Cylinder Transmission: 9 Speed Road Ranger GVM: 35,000 kg - 12.00 R 20 Tyres - 90% Tyres All Round Plus Spares - 7.5 Metre Tray - 2,200 Litre Bunded Fuel Cell - 7,500 Litre Center Mount Water Tank - New Clutch Tray Truck Location: Western Australia Learn More

Air Compressor Make: Atlas Copco Model: XRVS 606CD ASME Hours: 4,132 Engine: Caterpillar C18 Horsepower: 575 429 kW 1,350 CFM Booster Make: Hurricane Model: 6T-276-42B Hours: 3,954 Engine: Caterpillar C7 Horsepower: 250 186.5 kW Mist Pump Make: KERR Model: KP3300 Hours: 1,495 Plunger Size: 1.75 Transmission: Eaton FS 5406A Engine: Deutz BF4L914 Horsepower: 97 72.4 kW Trailer Make: Wade Year: 2007 VIN: 1W9H45217E285750 Trailer Mounted Air Foam Unit Location: United States of America Learn More

Air Compressor Serial Number: AIA1146806 / 1616725781 Hours: 5,439 Engine: Caterpillar C15 Horsepower: 440 328 kW 1,600 CFM Booster Make: CIP Model: PHT/2 Hours: 4,862 Engine: Cummins QSM11 Horsepower: 400 298 kW Mist Pump Make: KERR Model: KP3300 Hours: 2,194 Plunger Size: 1.75 Transmission: Twin Disc SP111HP3 Engine: Cummins B4.5T-P99 Horsepower: 99 74 kW Trailer Make: Wade Model: WHT-45FT Year: 2006 VIN: 1W9FH45276F285203 Trailer Mounted Air Foam Unit Location: United States of America Learn More

Air Compressor Make: Atlas Copco Model: XASE 1600CD ASME Box Hours: 3,682 Engine: Caterpillar C15 Horsepower: 440 328 kW 1,600 CFM Booster Make: CIP Model: PHT/2 Hours: 3,605 Engine: Cummins QSM11 Horsepower: 400 298 kW Mist Pump Make: KERR Model: KT3350 Hours: 2,819 Plunger Size: 2 Engine: Cummins B4.5T-P99 Horsepower: 99 74 kW Trailer Make: Aztec Trailers Year: 2006 VIN: 1A9BM1B606M362243 Trailer Mounted Air Foam Unit Location: United States of America Learn More

Air Compressor Serial Number: 200607100029 Engine: Caterpillar C18 Horsepower: 700 522 kW 1,500 CFM Booster Make: CIP Model: PHT/2 Engine: Caterpillar C9 Horsepower: 325 Mist Pump Make: KERR Model: KP3300 Hours: 3,962 Plunger Size: 1.75 Engine: Caterpillar 3054C Trailer Make: Nuttall Year: 2007 Serial Number: 4C9LN492X7A061136 Trailer Mounted Air Foam Unit Location: United States of America Learn More