Search results for: 'hire for state colorado swing'

40' Foot Accommodation/Kitchen/Shower Mounted on Tri-Axle Trailer with Dolly (FOR HIRE/RENT - POA) (hire-ehub4457)

For Hire

Type: 40' Foot - 2x Bedrooms with Bunks - Air Conditioning (Recently Replaced) - Kitchen - Shower (No Toilet) - Includes Dolly - Tri-Axle Trailer - Recently Sandblasted & Painted Trailer Mounted Accommodation Location: Northern Territory, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Northern Territory, Australia	MODEL	40' Foot

Add to Wish List Add to Compare

2024 Forward RC3 Track Mounted Water Well Drill Rig (POA) (sale-ehub4453)

For Sale

$0.00

Make: Forward Model: RC3 Year: 2024 Hours: 128 Engine: Cummins 6BTA Drilling Capacity: 380 m Drilling Diameter: 10" Inches Drill Head Rotation: 0-120 RPM / 5,600 Nm Pull Back Force: 120 kN Hoist Capacity: 20 kN Feed Stroke: 3,400 mm Mast Height: 6,400 mm Mud Pump: 450 Litres per minute at 1,000 PSI Crawl Speed: 3 km/h Weight: 1,180 kg Dimensions: 6,400 x 2,250 x 400 - Remote Tramming - Jack Legs - Mast Tilt - Mast Pump Includes; - 150 Metres of Rods & Different Sized Bits - Settling Tank - Hoses Modifications; - P.R.D Dual Breakout 210 mm Diameter (Can be swung out of way to allow larger install) - Larger Hydraulic Pump Installed Track Mounted Water Well Drill Rig Location: Western Australia Learn More

Machine hours	128	KILOMETERS	N/A
YEAR	N/A	BRAND	Forward
LOCATION	Western Australia	MODEL	RC3

Add to Wish List Add to Compare

Kurth KB25 Track Mounted Rotary Drill Rig ($115,000 ex GST) (sale-ehub4450)

For Sale

$0.00

Make: Kurth Model: KB25 Rotation Speed: 0-120 RPM Max. Torque: 5,000 Nm Stroke: 2,300 mm Max. Pullback Force: 48 kN Max. Feed Force: 32 kN Max. Casing Clamping Diameter: 273 mm Max. Casing Pullback Force: 150 kN Rotary Drive Travel Speed: 40m/min (max.) Rotary Drive Tilt Out Angle: 40 degrees from vertical - Set up for Shell & Auger - Drilling & Casing Clamp Range from 114 mm OD to 219 mm OD Drilling Capacity; Auger Drilling with Casings Ø 219/178 mm: 25-40 metres Hollow Stem Augers Ø 195/110 mm: 40 metres Direct Mud Rotary Drilling Ø 190 mm: 100 metres Down Hole Hammer Drilling Ø 150 mm: 100 metres Track Mounted Rotary Drill Rig Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Western Australia	MODEL	KB25

Add to Wish List Add to Compare

VB10 Track Mounted Dual Rotary Drill Rig ($409,500 ex GST) (sale-ehub4427)

For Sale

$409,500.00

Model: VB10 Engine: Deutz TCD2012L04 4 Cylinder Working Pressure: Max. 350 Bar Torque (Inside Rods): 3,700 / 7,400 Speed: 120 / 60 RPM Torque (Outside Rods): 12,000 / 24,000 Speed: 54 / 27 RPM Max. Breaking Torque: 46,000 Nm Drill Pole; Pole Profile: 300 x 200 x 8 mm Pole Height: 7,190 mm Stroke: 3,600 mm Hook Load / Pulling Force (Chain): 120 kN / 245 kN Max. Contact Pressure (Chain): 60 kN Travelling Speed: Up to 40 m/min Max. Rod Length: 2 m Track Mounted Dual Rotary Drill Rig Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Western Australia	MODEL	VB10

Add to Wish List Add to Compare

2022 VersaDrill KmN1.4sm Track Mounted Core Drill Rig (POA) (sale-ehub4426)

For Sale

$0.00

Make: VersaDrill Model: KmN1.4sm Year: 2022 Hours: 3,500 Depth Capacity: N Size @ 2,294 m (7,526 ft) Rotary Head Ratio: 1:2,33 Speed: 0 to 1,250 RPM Spindle Interior Dimension: 124 mm (4.9" Inches) Hydraulic Motor: 160 CC Variable Track Mounted Core Drill Rig Location: United States of America Learn More

Machine hours	3,500	KILOMETERS	N/A
YEAR	N/A	BRAND	Versadrill
LOCATION	United States of America	MODEL	KmN1.4sm

Add to Wish List Add to Compare

Gardner Denver 5x6 Diesel Driven Skid Mounted Duplex Mud Pump (FOR HIRE/RENT - POA) (hire-ehub4415)

For Hire

Make: Gardner Denver Type: 5x6 Engine: Kubota V3300 4 Cylinder Water Cooled - Diesel Driven - Manual Clutch - Belt Drive - Pulsation Dampener - OTECO Pin Pressure Valve - 200 Litre Fuel Tank Dimensions; Length: 2,950 Width: 1,500 Height: 2,300 Weight: 2.4 Tonne Skid Mounted Duplex Mud Pump Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Gardner Denver
LOCATION	Queensland, Australia	MODEL	5x6

Add to Wish List Add to Compare

Foremost 306430 6" Inch API Pin / 7.5" Inch Rod BECO Box Thread Shock Sub ($8,500 ex GST) (sale-ehub4406)

For Sale

$8,500.00

Make: Foremost Model: 306430 Pin: 6" Inch API Box Thread: 7.5" Inch Rod BECO Part Number: 322424 US Pat Number: 6332841 Serial Number: 1000166 Shock Sub Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Foremost
LOCATION	Western Australia	MODEL	306430 6" Inch API

Add to Wish List Add to Compare

Foremost 14-50-6353 4.5" Inch API Refurbished Shock Sub ($11,000 ex GST) (sale-ehub4405)

For Sale

$11,000.00

Make: Foremost Model: 14-50-6353 Pin: 4.5" Inch API Box Thread: 4.5" Inch API Part Number: 320316 Serial Number: 968176-2 - Refurbished Shock Sub Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Foremost
LOCATION	Western Australia	MODEL	14-50-6353 4.5" Inch API

Add to Wish List Add to Compare

Sandvik DE712 Track Mounted Drill Rig (FOR HIRE/RENT - POA) (hire-ehub4379)

For Hire

Make: Sandvik Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Track Mounted Drill Rig Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Sandvik
LOCATION	Queensland, Australia	MODEL	DE712

Add to Wish List Add to Compare

Caterpillar CAT 994F Wheel Loader (POA) (sale-ehub4373)

For Sale

$0.00

Make: Caterpillar Model: 994F Hours (Frame): 80,693 Hours (Engine): 19,769 Serial Number: 994FV44200214 Wheel Loader Location: United States of America Learn More

Machine hours	19,769	KILOMETERS	N/A
YEAR	N/A	BRAND	Caterpillar
LOCATION	United States of America	MODEL	994F

Add to Wish List Add to Compare

2021 Caterpillar CAT 777G Dump Truck (POA) (sale-ehub4366)

For Sale

$0.00

Make: Caterpillar Model: 777G Year: 2021 Hours: 7,000 - EPA Dump Truck Location: United States of America Learn More

Machine hours	7,000	KILOMETERS	N/A
YEAR	2021	BRAND	Caterpillar
LOCATION	United States of America	MODEL	777G

Add to Wish List Add to Compare

Drilling Consumables Package (Open to Offers) (sale-ehub4349)

For Sale

$0.00

Includes; - 7x NMLC Bit and Reamers - 3x NMLC Bits - 2x NMLC TC Core Bit - 1x HMLC Used Bit and Reamer - 1x HMLC New S15 Core Bit - 1x HMLC New Reamer - 1x HMLC Used Core Bit - 1x Tri Cone 2 15/16" Inch - 1x Tri Cone 3 7/8" Inch - 1x HQ3 Bit Reamer Fordia S11/14 - 5x HQ3 Used IMP Bits - 2x HQ3 TC Core Bits - 1x PQ3 Near New IMP Core Bit - 1x C4 IMP Bit and Reamer - 1x NW IMP Shoe Bit - 1x NW TC Shoe Bit - 1x HQ Rod TC Shoe Bit - 2x NQ3 Near New IMP Core Bits - 3x NQ Reamers - 1x NQ Rod Reamer - 1x NQ New IMP Core Bit Hayden S14/15 - 1x HQ New Reamer - 1x HQ Near New Reamer - 1x New 3 7/8" Inch Drag Bit - 2x Near New 4 1/2" Inch Drag Bit - 1x NMLC New Hard Core S6 - 1x NMLC New Reamer - 1x NQ3 Hard Core S15 - 9x 2 Metre Used RC Rods - 1x Used 1.5 Metre RC Rod with Bit - 4x Worn Augers - 1x Used 4 1/2" Inch Bit - 1x New 4 1/2" Inch Bit - 1x 6 1/2" Inch Drag Bit - 1x 100 mm Tube Adapter - 1x 75 mm Tube Adapter - 2x 50 mm Tube Adapter Plus 50 mm Piston Sampler Drilling Consumables Package Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	See Description

Add to Wish List Add to Compare

2020 Wacker Neuson TH412 Telehandler with Forklift Attachment ($89,000 ex GST) (sale-ehub3386)

For Sale

$89,000.00

Make: Wacker Neuson Model: TH412 Year: 2020 Hours: Less than 500 Engine: Yanmar 3TNV80FT @ 25HP Chassis Operating Pressure: 5,510 PSI / 380 bar Hydraulic Operating Pressure: 3,190 PSI / 220 bar Payload Max: 1,250 kg Payload Lift Max: 1,250 kg Lift Bucket Swivel: 4,537 mm Dimensions Length: 3,944 mm (2,991 mm w/out Bucket) Width: 1,564 mm Height: 5,280 mm (1,995 mm Just Cab) Weight: 2,750 kg - Forklift Attachment - Side Shift - Air Conditioning / Heating & Ventilation - ROPS / FOPS tested with VSG safety window on right side - Front, Roof & Rear Wipers - Heated Rear Window - Tilt Display - Sun Shade - Bottle Holder - Storage Net - LED Work Lights (1x Front & 1x On Cab Roof) Telehandler Location: Western Australia Learn More

Machine hours	Less than 500	KILOMETERS	N/A
YEAR	2020	BRAND	Wacker Neuson
LOCATION	Western Australia	MODEL	TH412

Add to Wish List Add to Compare

2018 Exploration Drill Masters EDM 95K Track Mounted Drill Rig (POA) (sale-ehub4344)

For Sale

$0.00

Make: Exploration Drill Masters EDM Model: 95K Year: 2018 Hours: 32,431 Drill Head Hours: 32,431 Compressor Hours: 32,431 Onboard Air Pack: Sullair 1,150 CFM / 500 PSI Air Compressor - Spare Parts available (can provide a detailed list with pricing) - EDM MK2 Core Rod Feeder (For additional $USD350,000) Track Mounted Drill Rig Location: United States of America Learn More

Machine hours	32,431	KILOMETERS	N/A
YEAR	2018	BRAND	EDM
LOCATION	United States of America	MODEL	95K

Add to Wish List Add to Compare

2025 Geoprobe 7822DT Track Mounted Drill Rig (POA) (sale-ehub4343)

For Sale

$0.00

Make: Geoprobe Model: 7822DT Year: 2025 Hours: 319 - Geoprobe GH63 Hammer - Tethered and Wireless Remote - 4 Speed Head (4,000 ft-lbf @ 750 RPM) - Dual Winch Kit - 3' Mast Extension - 7" Inch Breakout Kit - H Feed Control / CPT Valve Kit - 140 lbs Auto Drop Hammer - Anvil Hanger - ADH Drive Cap AWJ, Pin Down - 5' Extruder with Moyno 3L6 - Helper Side - 53" Inch Toolbox - Open Storage Box - Drop Rack System w/ Rod Rack - Yoke Vise & Mounting Bracket - High Speed Water Swivel w/ Float - Float Sub NWJ Pin Assembly Track Mounted Drill Rig Location: United States of America Learn More

Machine hours	319	KILOMETERS	N/A
YEAR	N/A	BRAND	Geoprobe Systems
LOCATION	United States of America	MODEL	7822DT

Add to Wish List Add to Compare

2007 Schramm T685WS Drill Rig Mounted on Sterling LT9500 Truck (POA) (sale-ehub4339)

For Sale

$0.00

Rig Make: Schramm Model: T685WS Year: 2007 Hours: 1,624 Engine: MTU 12V-2000 Pullback: 74,000 lbs Air Compressor: Sullair 1,350 CFM / 350 PSI to 1,150 CFM / 500 PSI - Winch - Hammer Lubricator - Water Injection with Soap Pump - Set Up for 25x Lengths of 4 1/2" Inch Drill Pipe - 6" Inch & 8" Inch Hammers - Diverters - Subs - Wrenches - Tooling, etc. Truck Make: Sterling Model: LT9500 Miles: 1,729 Truck Mounted Drill Rig Location: United States of America Learn More

Machine hours	1,624	KILOMETERS	1,729
YEAR	2007	BRAND	Schramm
LOCATION	United States of America	MODEL	T685WS

Add to Wish List Add to Compare

3x Schramm 5001-4837 Matrix 4.5" Inch Reverse Circulation Sub Adapters (POA) (sale-ehub4338)

For Sale

$0.00

Make: Schramm Model: Matrix 4.5" Inch Part Number: 5001-4837 - Dual Wall Mineral Exploration Drilling Reverse Circulation - Crossover Connection for Pipe, Collars, Bits, Hammers, Stabilisers or Other Drilling Rig String Components Quantity: 3 Sub Adapter Location: United States of America Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Schramm
LOCATION	United States of America	MODEL	5001-4837 Matrix 4.5" Inch

Add to Wish List Add to Compare

140x Lengths of Foremost 4 1/2" Inch Class Drill Systems Reverse Circulation CTP Drill Pipe / Rod (POA) (sale-ehub4337)

For Sale

$0.00

Make: Foremost Type: 4 1/2" Inch Connector Tube Pipe (CTP) - Reverse Circulation OD: 4 1/2" Inch x 3 1/4" Inch ID (Approx.): 3 1/4" Inch (without inner tubes) - Currently has "BAD" Steel Inner Tubes Installed (Inner Tubes can be removed by pressing; with PIN down and push out BOX end) Quantity: 140 Drill Pipe / Rod Location: United States of America Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Foremost
LOCATION	United States of America	MODEL	4 1/2" Inch

Add to Wish List Add to Compare

Reverse Circulation Drilling Swivels Package (POA) (sale-ehub4336)

For Sale

$0.00

Suitable for Mineral Exploration with Ingersoll Rand T3W, Atlas Copco TH60 or Similar Includes; - Western Rubber 25CM-4 Top Swivel - Discharge Gooseneck - Side Air Inlet Swivel with Quill Reverse Circulation Drilling Swivels Package Location: United States of America Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	United States of America	MODEL	Reverse Circulation Drilling Swivels Package

Add to Wish List Add to Compare

3x Schramm 5001-4836 Reverse Circulation Sub Adapters (POA) (sale-ehub4335)

For Sale

$0.00

Make: Schramm Model: 5001-4836 Thread (Approx.): Matrix, Metzke, Remet - Marked 0512665 / 0450M-BAKRM-1 Special - Crossover Connector for Drill Pipe, Collars, Bits, Hammers, Stabilisers or Other Drilling Rig String Components Quantity: 3 Reverse Circulation Sub Adapter Location: United States of America Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Schramm
LOCATION	United States of America	MODEL	Reverse Circulation Sub Adapter

Add to Wish List Add to Compare

Search results for: 'hire for state colorado swing'

AUSTRALIA WIDE SERVICE

REQUIRE ASSISTANCE - HAVE A QUESTION?

EQUIPMENT FOR HIRE OR FOR SALE