2024 Forward RC3 Track Mounted Water Well Drill Rig (POA) (sale-ehub4453)

For Sale

$0.00

Make: Forward Model: RC3 Year: 2024 Hours: 128 Engine: Cummins 6BTA Drilling Capacity: 380 m Drilling Diameter: 10" Inches Drill Head Rotation: 0-120 RPM / 5,600 Nm Pull Back Force: 120 kN Hoist Capacity: 20 kN Feed Stroke: 3,400 mm Mast Height: 6,400 mm Mud Pump: 450 Litres per minute at 1,000 PSI Crawl Speed: 3 km/h Weight: 1,180 kg Dimensions: 6,400 x 2,250 x 400 - Remote Tramming - Jack Legs - Mast Tilt - Mast Pump Includes; - 150 Metres of Rods & Different Sized Bits - Settling Tank - Hoses Modifications; - P.R.D Dual Breakout 210 mm Diameter (Can be swung out of way to allow larger install) - Larger Hydraulic Pump Installed Track Mounted Water Well Drill Rig Location: Western Australia Learn More

Machine hours	128	KILOMETERS	N/A
YEAR	N/A	BRAND	Forward
LOCATION	Western Australia	MODEL	RC3

Add to Wish List Add to Compare

Kurth KB25 Track Mounted Rotary Drill Rig ($115,000 ex GST) (sale-ehub4450)

For Sale

$0.00

Make: Kurth Model: KB25 Rotation Speed: 0-120 RPM Max. Torque: 5,000 Nm Stroke: 2,300 mm Max. Pullback Force: 48 kN Max. Feed Force: 32 kN Max. Casing Clamping Diameter: 273 mm Max. Casing Pullback Force: 150 kN Rotary Drive Travel Speed: 40m/min (max.) Rotary Drive Tilt Out Angle: 40 degrees from vertical - Set up for Shell & Auger - Drilling & Casing Clamp Range from 114 mm OD to 219 mm OD Drilling Capacity; Auger Drilling with Casings Ø 219/178 mm: 25-40 metres Hollow Stem Augers Ø 195/110 mm: 40 metres Direct Mud Rotary Drilling Ø 190 mm: 100 metres Down Hole Hammer Drilling Ø 150 mm: 100 metres Track Mounted Rotary Drill Rig Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Western Australia	MODEL	KB25

Add to Wish List Add to Compare

VB10 Track Mounted Dual Rotary Drill Rig ($409,500 ex GST) (sale-ehub4427)

For Sale

$409,500.00

Model: VB10 Engine: Deutz TCD2012L04 4 Cylinder Working Pressure: Max. 350 Bar Torque (Inside Rods): 3,700 / 7,400 Speed: 120 / 60 RPM Torque (Outside Rods): 12,000 / 24,000 Speed: 54 / 27 RPM Max. Breaking Torque: 46,000 Nm Drill Pole; Pole Profile: 300 x 200 x 8 mm Pole Height: 7,190 mm Stroke: 3,600 mm Hook Load / Pulling Force (Chain): 120 kN / 245 kN Max. Contact Pressure (Chain): 60 kN Travelling Speed: Up to 40 m/min Max. Rod Length: 2 m Track Mounted Dual Rotary Drill Rig Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Western Australia	MODEL	VB10

Add to Wish List Add to Compare

2022 VersaDrill KmN1.4sm Track Mounted Core Drill Rig (POA) (sale-ehub4426)

For Sale

$0.00

Make: VersaDrill Model: KmN1.4sm Year: 2022 Hours: 3,500 Depth Capacity: N Size @ 2,294 m (7,526 ft) Rotary Head Ratio: 1:2,33 Speed: 0 to 1,250 RPM Spindle Interior Dimension: 124 mm (4.9" Inches) Hydraulic Motor: 160 CC Variable Track Mounted Core Drill Rig Location: United States of America Learn More

Machine hours	3,500	KILOMETERS	N/A
YEAR	N/A	BRAND	Versadrill
LOCATION	United States of America	MODEL	KmN1.4sm

Add to Wish List Add to Compare

Foremost 306430 6" Inch API Pin / 7.5" Inch Rod BECO Box Thread Shock Sub ($8,500 ex GST) (sale-ehub4406)

For Sale

$8,500.00

Make: Foremost Model: 306430 Pin: 6" Inch API Box Thread: 7.5" Inch Rod BECO Part Number: 322424 US Pat Number: 6332841 Serial Number: 1000166 Shock Sub Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Foremost
LOCATION	Western Australia	MODEL	306430 6" Inch API

Add to Wish List Add to Compare

Foremost 14-50-6353 4.5" Inch API Refurbished Shock Sub ($11,000 ex GST) (sale-ehub4405)

For Sale

$11,000.00

Make: Foremost Model: 14-50-6353 Pin: 4.5" Inch API Box Thread: 4.5" Inch API Part Number: 320316 Serial Number: 968176-2 - Refurbished Shock Sub Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Foremost
LOCATION	Western Australia	MODEL	14-50-6353 4.5" Inch API

Add to Wish List Add to Compare

Bowen 118 Gearench Petol Push Up Visetong ($3,500 ex GST) (sale-ehub4402)

For Sale

$3,500.00

Model: Bowen Size: 118 Gearench PUVTH: 118 BO Petol Push Up Visetong Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Western Australia	MODEL	Bowen 118 Gearench

Add to Wish List Add to Compare

Regan Torus 7 1/6" Inch 3K Annular BOP ($27,272.73 ex GST) (sale-ehub4381)

For Sale

$27,272.73

Make: Regan Torus Size: 7 1/6" Inch 3K PSI: 1,500 / 3,000 Annular BOP Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	Regan Torus 7 1/6" Inch 3K

Add to Wish List Add to Compare

11" Inch Single Ram BOP Blowout Preventer ($22,727.28 ex GST) (sale-ehub4380)

For Sale

$0.00

Model: Single Ram PSI: 3,000 Bore Size: 11" Inch Temp Class: T-20/250 Dimensions: 82.5" x 29.8" x 22.6" Weight: 3,813 lb Blowout Preventer BOP Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	Single Ram 11" Inch

Add to Wish List Add to Compare

Sandvik DE712 Track Mounted Drill Rig (FOR HIRE/RENT - POA) (hire-ehub4379)

For Hire

Make: Sandvik Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Track Mounted Drill Rig Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Sandvik
LOCATION	Queensland, Australia	MODEL	DE712

Add to Wish List Add to Compare

Drilling Consumables Package (Open to Offers) (sale-ehub4349)

For Sale

$0.00

Includes; - 7x NMLC Bit and Reamers - 3x NMLC Bits - 2x NMLC TC Core Bit - 1x HMLC Used Bit and Reamer - 1x HMLC New S15 Core Bit - 1x HMLC New Reamer - 1x HMLC Used Core Bit - 1x Tri Cone 2 15/16" Inch - 1x Tri Cone 3 7/8" Inch - 1x HQ3 Bit Reamer Fordia S11/14 - 5x HQ3 Used IMP Bits - 2x HQ3 TC Core Bits - 1x PQ3 Near New IMP Core Bit - 1x C4 IMP Bit and Reamer - 1x NW IMP Shoe Bit - 1x NW TC Shoe Bit - 1x HQ Rod TC Shoe Bit - 2x NQ3 Near New IMP Core Bits - 3x NQ Reamers - 1x NQ Rod Reamer - 1x NQ New IMP Core Bit Hayden S14/15 - 1x HQ New Reamer - 1x HQ Near New Reamer - 1x New 3 7/8" Inch Drag Bit - 2x Near New 4 1/2" Inch Drag Bit - 1x NMLC New Hard Core S6 - 1x NMLC New Reamer - 1x NQ3 Hard Core S15 - 9x 2 Metre Used RC Rods - 1x Used 1.5 Metre RC Rod with Bit - 4x Worn Augers - 1x Used 4 1/2" Inch Bit - 1x New 4 1/2" Inch Bit - 1x 6 1/2" Inch Drag Bit - 1x 100 mm Tube Adapter - 1x 75 mm Tube Adapter - 2x 50 mm Tube Adapter Plus 50 mm Piston Sampler Drilling Consumables Package Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	See Description

Add to Wish List Add to Compare

2020 Wacker Neuson TH412 Telehandler with Forklift Attachment ($89,000 ex GST) (sale-ehub3386)

For Sale

$89,000.00

Make: Wacker Neuson Model: TH412 Year: 2020 Hours: Less than 500 Engine: Yanmar 3TNV80FT @ 25HP Chassis Operating Pressure: 5,510 PSI / 380 bar Hydraulic Operating Pressure: 3,190 PSI / 220 bar Payload Max: 1,250 kg Payload Lift Max: 1,250 kg Lift Bucket Swivel: 4,537 mm Dimensions Length: 3,944 mm (2,991 mm w/out Bucket) Width: 1,564 mm Height: 5,280 mm (1,995 mm Just Cab) Weight: 2,750 kg - Forklift Attachment - Side Shift - Air Conditioning / Heating & Ventilation - ROPS / FOPS tested with VSG safety window on right side - Front, Roof & Rear Wipers - Heated Rear Window - Tilt Display - Sun Shade - Bottle Holder - Storage Net - LED Work Lights (1x Front & 1x On Cab Roof) Telehandler Location: Western Australia Learn More

Machine hours	Less than 500	KILOMETERS	N/A
YEAR	2020	BRAND	Wacker Neuson
LOCATION	Western Australia	MODEL	TH412

Add to Wish List Add to Compare

140x Lengths of Foremost 4 1/2" Inch Class Drill Systems Reverse Circulation CTP Drill Pipe / Rod (POA) (sale-ehub4337)

For Sale

$0.00

Make: Foremost Type: 4 1/2" Inch Connector Tube Pipe (CTP) - Reverse Circulation OD: 4 1/2" Inch x 3 1/4" Inch ID (Approx.): 3 1/4" Inch (without inner tubes) - Currently has "BAD" Steel Inner Tubes Installed (Inner Tubes can be removed by pressing; with PIN down and push out BOX end) Quantity: 140 Drill Pipe / Rod Location: United States of America Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Foremost
LOCATION	United States of America	MODEL	4 1/2" Inch

Add to Wish List Add to Compare

600X Track Mounted Multipurpose Hydraulic Drill Rig (New Build - POA) (sale-ehub4326)

For Sale

$0.00

Model: 600X Engine: John Deere Tier 4F - Stage V - Model: 4045CI550 @ 173 HP Pull Down Force: 7,000 kg Retract Force: 10,000 kg Feed Down Speed: 0-23 m/min Feed Retract Speed: 0-13.5 m/min Feed Stroke: 2.1 m Mast Dumping: 950 mm Rod Rack Capacity: 100 ft AWJ + 100 ft NQ Auger Rack Capacity: 50 ft of 3 1/4" Inch Hollowed Augers Features; - Engine Leveler - Engine Controller Unit - Pulling/Carrier Winch - 3x Night Lights - 2x Mud Pumps; Progressive Cavity Pump & Piston Pump - High Capacity Winch & Wireline Winch - Double Rod Clamp Breakout System - Automatic SPT Hammer - 16 Speed Rotation Head - Driller Platform - Toolbox Optional Features; - 4x Camera CCTV System - DSE Power Unit Parameters - Drilling Parameters - JD (John Deere) Link Track Mounted Multipurpose Hydraulic Drill Rig Location: United Arab Emirates Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	United Arab Emirates	MODEL	600X

Add to Wish List Add to Compare

DE740 Drill Rig (POA) (sale-ehub4317)

For Sale

$0.00

Make/Model: DE740 Engine: Cummins QSB6.7 Inline 6 Cylinder Tier 3 Depth Capacity; TK56: 3.187 m B: 2.350 m TK66: 2.731 m N: 2 m TK76: 1.886 m H: 1.4 m P: 831 m Feed Force: 6.8 Tonne (15,000 lbf) Pull Force: 13.6 Tonne (30,000 lbf) Feed Length (Stroke): 3.45 m Speed Up & Down: 30 m/min Features; - "P" Size Chuck Drive C40 Rotation Head with Hollow Spindle and Stepless Speed Control - Telescoping Upper Mast - All Hydraulically Operated - Self-Propelled Drill Unit - Rod Spin Guard - 1x Rod Clamp can support; B, N, H, P and S Rod Sizes; 44.5 mm to 177.8 mm - Head Traverse System directly coupled to Rotation Head Carriage - Wireline Wiper and Safety Cut Out + Options Drill Rig Location: TBA (New Build - Built to Order) Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	TBA	MODEL	DE740

Add to Wish List Add to Compare

Atlas Copco XRVS 606CD ASME 1,350 CFM Air Compressor, Hurricane 6T-276-42B Booster & KERR KP3300 Mist Pump Trailer Mounted Air Foam Unit ($USD148,500) (sale-ehub4293)

For Sale

$0.00

Air Compressor Make: Atlas Copco Model: XRVS 606CD ASME Hours: 4,132 Engine: Caterpillar C18 Horsepower: 575 429 kW 1,350 CFM Booster Make: Hurricane Model: 6T-276-42B Hours: 3,954 Engine: Caterpillar C7 Horsepower: 250 186.5 kW Mist Pump Make: KERR Model: KP3300 Hours: 1,495 Plunger Size: 1.75 Transmission: Eaton FS 5406A Engine: Deutz BF4L914 Horsepower: 97 72.4 kW Trailer Make: Wade Year: 2007 VIN: 1W9H45217E285750 Trailer Mounted Air Foam Unit Location: United States of America Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	2007	BRAND	Atlas Copco
LOCATION	United States of America	MODEL	See Description

Add to Wish List Add to Compare

1,600 CFM Air Compressor, CIP PHT/2 Booster & KERR KP3300 Mist Pump Trailer Mounted Air Foam Unit ($USD148,500) (sale-ehub4292)

For Sale

$0.00

Air Compressor Serial Number: AIA1146806 / 1616725781 Hours: 5,439 Engine: Caterpillar C15 Horsepower: 440 328 kW 1,600 CFM Booster Make: CIP Model: PHT/2 Hours: 4,862 Engine: Cummins QSM11 Horsepower: 400 298 kW Mist Pump Make: KERR Model: KP3300 Hours: 2,194 Plunger Size: 1.75 Transmission: Twin Disc SP111HP3 Engine: Cummins B4.5T-P99 Horsepower: 99 74 kW Trailer Make: Wade Model: WHT-45FT Year: 2006 VIN: 1W9FH45276F285203 Trailer Mounted Air Foam Unit Location: United States of America Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	2006	BRAND	N/A
LOCATION	United States of America	MODEL	See Description

Add to Wish List Add to Compare

Atlas Copco XASE 1600CD ASME Box 1,600 CFM Air Compressor, CIP PHT/2 Booster & KERR KT3350 Mist Pump Trailer Mounted Air Foam Unit ($USD148,500) (sale-ehub4291)

For Sale

$0.00

Air Compressor Make: Atlas Copco Model: XASE 1600CD ASME Box Hours: 3,682 Engine: Caterpillar C15 Horsepower: 440 328 kW 1,600 CFM Booster Make: CIP Model: PHT/2 Hours: 3,605 Engine: Cummins QSM11 Horsepower: 400 298 kW Mist Pump Make: KERR Model: KT3350 Hours: 2,819 Plunger Size: 2 Engine: Cummins B4.5T-P99 Horsepower: 99 74 kW Trailer Make: Aztec Trailers Year: 2006 VIN: 1A9BM1B606M362243 Trailer Mounted Air Foam Unit Location: United States of America Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	2006	BRAND	Atlas Copco
LOCATION	United States of America	MODEL	See Description

Add to Wish List Add to Compare

1,500 CFM Air Compressor, CIP PHT/2 Booster & KERR KP3300 Mist Pump Trailer Mounted Air Foam Unit ($USD148,500) (sale-ehub4290)

For Sale

$0.00

Air Compressor Serial Number: 200607100029 Engine: Caterpillar C18 Horsepower: 700 522 kW 1,500 CFM Booster Make: CIP Model: PHT/2 Engine: Caterpillar C9 Horsepower: 325 Mist Pump Make: KERR Model: KP3300 Hours: 3,962 Plunger Size: 1.75 Engine: Caterpillar 3054C Trailer Make: Nuttall Year: 2007 Serial Number: 4C9LN492X7A061136 Trailer Mounted Air Foam Unit Location: United States of America Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	2007	BRAND	N/A
LOCATION	United States of America	MODEL	See Description

Add to Wish List Add to Compare

Atlas Copco XRVS 606CD ASME 1,350 CFM Air Compressor, Hurricane 6T-276-42B Booster & KERR KP3300 Mist Pump Trailer Mounted Air Foam Unit ($USD148,500) (sale-ehub4289)

For Sale

$0.00

Air Compressor Make: Atlas Copco Model: XRVS 606CD ASME Engine: Caterpillar C18 Horsepower: 575 429 kW 1,350 CFM Booster Make: John Deere Model: 4045DF270 Engine: Caterpillar 3126 Horsepower: 250 186.5 kW Mist Pump Make: KERR Model: KP3300 Plunger Size: 1.75 Transmission: Eaton FS 5706A Engine: Deutz BF4L914 Horsepower: 97 72.4 kW Trailer Make: Fontaine Model: VDT-1-8048AWK Year: 2007 Trailer Mounted Air Foam Unit Location: United States of America Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	2007	BRAND	Atlas Copco
LOCATION	United States of America	MODEL	See Description

Add to Wish List Add to Compare

Search results for: 'pod up camera for size newag me'

AUSTRALIA WIDE SERVICE

REQUIRE ASSISTANCE - HAVE A QUESTION?

EQUIPMENT FOR HIRE OR FOR SALE