Search results for: 'size rods hire for state'

40' Foot Accommodation/Kitchen/Shower Mounted on Tri-Axle Trailer with Dolly (FOR HIRE/RENT - POA) (hire-ehub4457)

For Hire

Type: 40' Foot - 2x Bedrooms with Bunks - Air Conditioning (Recently Replaced) - Kitchen - Shower (No Toilet) - Includes Dolly - Tri-Axle Trailer - Recently Sandblasted & Painted Trailer Mounted Accommodation Location: Northern Territory, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Northern Territory, Australia	MODEL	40' Foot

Add to Wish List Add to Compare

Tatra 8x8 RC Support Truck with 4,000 Litre Water & Diesel Tanks (POA) (sale-ehub4456)

For Sale

$0.00

Make: Tatra KM's: 143,940 Type: 8x8 - 2x 4,000 Litre Diesel Tanks - 1x 4,000 Litre Water Tank - Safety Rails & Ladder Access - 24 Volt Electric Diesel Fuel Pump & Reel - Custom RC Hammer & Bit Storage - Mine Spec (UHF, Hi Viz, etc.) - Holds Approx. 550 Metre or 4.5" Inch RC Rods - Transfer Case Output Shaft and Drive Tube replaced around 20,000 km ago - Some rust appeared (in cab) and has been cut out and repaired Support Truck Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	143,940
YEAR	N/A	BRAND	Tatra
LOCATION	Western Australia	MODEL	8x8

Add to Wish List Add to Compare

2024 Forward RC3 Track Mounted Water Well Drill Rig (POA) (sale-ehub4453)

For Sale

$0.00

Make: Forward Model: RC3 Year: 2024 Hours: 128 Engine: Cummins 6BTA Drilling Capacity: 380 m Drilling Diameter: 10" Inches Drill Head Rotation: 0-120 RPM / 5,600 Nm Pull Back Force: 120 kN Hoist Capacity: 20 kN Feed Stroke: 3,400 mm Mast Height: 6,400 mm Mud Pump: 450 Litres per minute at 1,000 PSI Crawl Speed: 3 km/h Weight: 1,180 kg Dimensions: 6,400 x 2,250 x 400 - Remote Tramming - Jack Legs - Mast Tilt - Mast Pump Includes; - 150 Metres of Rods & Different Sized Bits - Settling Tank - Hoses Modifications; - P.R.D Dual Breakout 210 mm Diameter (Can be swung out of way to allow larger install) - Larger Hydraulic Pump Installed Track Mounted Water Well Drill Rig Location: Western Australia Learn More

Machine hours	128	KILOMETERS	N/A
YEAR	N/A	BRAND	Forward
LOCATION	Western Australia	MODEL	RC3

Add to Wish List Add to Compare

Kurth KB25 Track Mounted Rotary Drill Rig ($115,000 ex GST) (sale-ehub4450)

For Sale

$0.00

Make: Kurth Model: KB25 Rotation Speed: 0-120 RPM Max. Torque: 5,000 Nm Stroke: 2,300 mm Max. Pullback Force: 48 kN Max. Feed Force: 32 kN Max. Casing Clamping Diameter: 273 mm Max. Casing Pullback Force: 150 kN Rotary Drive Travel Speed: 40m/min (max.) Rotary Drive Tilt Out Angle: 40 degrees from vertical - Set up for Shell & Auger - Drilling & Casing Clamp Range from 114 mm OD to 219 mm OD Drilling Capacity; Auger Drilling with Casings Ø 219/178 mm: 25-40 metres Hollow Stem Augers Ø 195/110 mm: 40 metres Direct Mud Rotary Drilling Ø 190 mm: 100 metres Down Hole Hammer Drilling Ø 150 mm: 100 metres Track Mounted Rotary Drill Rig Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Western Australia	MODEL	KB25

Add to Wish List Add to Compare

VB10 Track Mounted Dual Rotary Drill Rig ($409,500 ex GST) (sale-ehub4427)

For Sale

$409,500.00

Model: VB10 Engine: Deutz TCD2012L04 4 Cylinder Working Pressure: Max. 350 Bar Torque (Inside Rods): 3,700 / 7,400 Speed: 120 / 60 RPM Torque (Outside Rods): 12,000 / 24,000 Speed: 54 / 27 RPM Max. Breaking Torque: 46,000 Nm Drill Pole; Pole Profile: 300 x 200 x 8 mm Pole Height: 7,190 mm Stroke: 3,600 mm Hook Load / Pulling Force (Chain): 120 kN / 245 kN Max. Contact Pressure (Chain): 60 kN Travelling Speed: Up to 40 m/min Max. Rod Length: 2 m Track Mounted Dual Rotary Drill Rig Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Western Australia	MODEL	VB10

Add to Wish List Add to Compare

2022 VersaDrill KmN1.4sm Track Mounted Core Drill Rig (POA) (sale-ehub4426)

For Sale

$0.00

Make: VersaDrill Model: KmN1.4sm Year: 2022 Hours: 3,500 Depth Capacity: N Size @ 2,294 m (7,526 ft) Rotary Head Ratio: 1:2,33 Speed: 0 to 1,250 RPM Spindle Interior Dimension: 124 mm (4.9" Inches) Hydraulic Motor: 160 CC Variable Track Mounted Core Drill Rig Location: United States of America Learn More

Machine hours	3,500	KILOMETERS	N/A
YEAR	N/A	BRAND	Versadrill
LOCATION	United States of America	MODEL	KmN1.4sm

Add to Wish List Add to Compare

Gardner Denver 5x6 Diesel Driven Skid Mounted Duplex Mud Pump (FOR HIRE/RENT - POA) (hire-ehub4415)

For Hire

Make: Gardner Denver Type: 5x6 Engine: Kubota V3300 4 Cylinder Water Cooled - Diesel Driven - Manual Clutch - Belt Drive - Pulsation Dampener - OTECO Pin Pressure Valve - 200 Litre Fuel Tank Dimensions; Length: 2,950 Width: 1,500 Height: 2,300 Weight: 2.4 Tonne Skid Mounted Duplex Mud Pump Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Gardner Denver
LOCATION	Queensland, Australia	MODEL	5x6

Add to Wish List Add to Compare

Foremost 306430 6" Inch API Pin / 7.5" Inch Rod BECO Box Thread Shock Sub ($8,500 ex GST) (sale-ehub4406)

For Sale

$8,500.00

Make: Foremost Model: 306430 Pin: 6" Inch API Box Thread: 7.5" Inch Rod BECO Part Number: 322424 US Pat Number: 6332841 Serial Number: 1000166 Shock Sub Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Foremost
LOCATION	Western Australia	MODEL	306430 6" Inch API

Add to Wish List Add to Compare

Foremost 14-50-6353 4.5" Inch API Refurbished Shock Sub ($11,000 ex GST) (sale-ehub4405)

For Sale

$11,000.00

Make: Foremost Model: 14-50-6353 Pin: 4.5" Inch API Box Thread: 4.5" Inch API Part Number: 320316 Serial Number: 968176-2 - Refurbished Shock Sub Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Foremost
LOCATION	Western Australia	MODEL	14-50-6353 4.5" Inch API

Add to Wish List Add to Compare

Bowen 118 Gearench Petol Push Up Visetong ($3,500 ex GST) (sale-ehub4402)

For Sale

$3,500.00

Model: Bowen Size: 118 Gearench PUVTH: 118 BO Petol Push Up Visetong Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Western Australia	MODEL	Bowen 118 Gearench

Add to Wish List Add to Compare

2x SRS ML Duo Track Mounted Multi Purpose Sonic Drill Rigs ($843,900 ex GST each) (sale-ehub4398)

For Sale

$843,900.00

Make: SRS Model: ML Duo Year: 2022 Hours: 3,000 approx. - Remote Controlled Road/Casing Loader Tooling (for an additional $80,000 ex GST); - 3x GD 1.5 Metre Rods - 1.5 Metres of GD 5.5" Inch Casing - 1x Casing Shoe - 1x SW3 Barrel Quantity: 2 Track Mounted Multi Purpose Sonic Drill Rig *EXPORT ONLY – to be sold internationally outside of Australia* Location: Western Australia Learn More

Machine hours	3,000 Approx.	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Western Australia	MODEL	SRS ML Duo

Add to Wish List Add to Compare

Regan Torus 7 1/6" Inch 3K Annular BOP ($27,272.73 ex GST) (sale-ehub4381)

For Sale

$27,272.73

Make: Regan Torus Size: 7 1/6" Inch 3K PSI: 1,500 / 3,000 Annular BOP Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	Regan Torus 7 1/6" Inch 3K

Add to Wish List Add to Compare

11" Inch Single Ram BOP Blowout Preventer ($22,727.28 ex GST) (sale-ehub4380)

For Sale

$0.00

Model: Single Ram PSI: 3,000 Bore Size: 11" Inch Temp Class: T-20/250 Dimensions: 82.5" x 29.8" x 22.6" Weight: 3,813 lb Blowout Preventer BOP Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	Single Ram 11" Inch

Add to Wish List Add to Compare

Sandvik DE712 Track Mounted Drill Rig (FOR HIRE/RENT - POA) (hire-ehub4379)

For Hire

Make: Sandvik Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Track Mounted Drill Rig Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Sandvik
LOCATION	Queensland, Australia	MODEL	DE712

Add to Wish List Add to Compare

Caterpillar CAT 994F Wheel Loader (POA) (sale-ehub4373)

For Sale

$0.00

Make: Caterpillar Model: 994F Hours (Frame): 80,693 Hours (Engine): 19,769 Serial Number: 994FV44200214 Wheel Loader Location: United States of America Learn More

Machine hours	19,769	KILOMETERS	N/A
YEAR	N/A	BRAND	Caterpillar
LOCATION	United States of America	MODEL	994F

Add to Wish List Add to Compare

2021 Caterpillar CAT 777G Dump Truck (POA) (sale-ehub4366)

For Sale

$0.00

Make: Caterpillar Model: 777G Year: 2021 Hours: 7,000 - EPA Dump Truck Location: United States of America Learn More

Machine hours	7,000	KILOMETERS	N/A
YEAR	2021	BRAND	Caterpillar
LOCATION	United States of America	MODEL	777G

Add to Wish List Add to Compare

Edson 350 Drill Rig Mounted on 1975 Toyota 75 Series Landcruiser ($125,000 ex GST) (sale-ehub4359)

For Sale

$125,000.00

Rig Make: Edson Model: 350 Hours: 4,500 Air Compressor: Compair/Broomwade (Plate No: C20450/206) - 25x Rods @ 2,050 mm long - 1x with Downhole 75 mm Hammer attached - 2x 75 mm Button Bits for Hammer and numerous Drag Bits included - 3x Bog Mats for Stabiliser Legs - 2-3x Rods have worn threads that would need re-machining/built up Vehicle Make: Toyota Model: 75 Series Landcruiser Year: 1975 Vehicle Mounted Drill Rig Location: Victoria, Australia Learn More

Machine hours	4,500	KILOMETERS	N/A
YEAR	1975	BRAND	Edson
LOCATION	Victoria, Australia	MODEL	350

Add to Wish List Add to Compare

Drilling Consumables Package (Open to Offers) (sale-ehub4349)

For Sale

$0.00

Includes; - 7x NMLC Bit and Reamers - 3x NMLC Bits - 2x NMLC TC Core Bit - 1x HMLC Used Bit and Reamer - 1x HMLC New S15 Core Bit - 1x HMLC New Reamer - 1x HMLC Used Core Bit - 1x Tri Cone 2 15/16" Inch - 1x Tri Cone 3 7/8" Inch - 1x HQ3 Bit Reamer Fordia S11/14 - 5x HQ3 Used IMP Bits - 2x HQ3 TC Core Bits - 1x PQ3 Near New IMP Core Bit - 1x C4 IMP Bit and Reamer - 1x NW IMP Shoe Bit - 1x NW TC Shoe Bit - 1x HQ Rod TC Shoe Bit - 2x NQ3 Near New IMP Core Bits - 3x NQ Reamers - 1x NQ Rod Reamer - 1x NQ New IMP Core Bit Hayden S14/15 - 1x HQ New Reamer - 1x HQ Near New Reamer - 1x New 3 7/8" Inch Drag Bit - 2x Near New 4 1/2" Inch Drag Bit - 1x NMLC New Hard Core S6 - 1x NMLC New Reamer - 1x NQ3 Hard Core S15 - 9x 2 Metre Used RC Rods - 1x Used 1.5 Metre RC Rod with Bit - 4x Worn Augers - 1x Used 4 1/2" Inch Bit - 1x New 4 1/2" Inch Bit - 1x 6 1/2" Inch Drag Bit - 1x 100 mm Tube Adapter - 1x 75 mm Tube Adapter - 2x 50 mm Tube Adapter Plus 50 mm Piston Sampler Drilling Consumables Package Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	See Description

Add to Wish List Add to Compare

2020 Wacker Neuson TH412 Telehandler with Forklift Attachment ($89,000 ex GST) (sale-ehub3386)

For Sale

$89,000.00

Make: Wacker Neuson Model: TH412 Year: 2020 Hours: Less than 500 Engine: Yanmar 3TNV80FT @ 25HP Chassis Operating Pressure: 5,510 PSI / 380 bar Hydraulic Operating Pressure: 3,190 PSI / 220 bar Payload Max: 1,250 kg Payload Lift Max: 1,250 kg Lift Bucket Swivel: 4,537 mm Dimensions Length: 3,944 mm (2,991 mm w/out Bucket) Width: 1,564 mm Height: 5,280 mm (1,995 mm Just Cab) Weight: 2,750 kg - Forklift Attachment - Side Shift - Air Conditioning / Heating & Ventilation - ROPS / FOPS tested with VSG safety window on right side - Front, Roof & Rear Wipers - Heated Rear Window - Tilt Display - Sun Shade - Bottle Holder - Storage Net - LED Work Lights (1x Front & 1x On Cab Roof) Telehandler Location: Western Australia Learn More

Machine hours	Less than 500	KILOMETERS	N/A
YEAR	2020	BRAND	Wacker Neuson
LOCATION	Western Australia	MODEL	TH412

Add to Wish List Add to Compare

2018 Exploration Drill Masters EDM 95K Track Mounted Drill Rig (POA) (sale-ehub4344)

For Sale

$0.00

Make: Exploration Drill Masters EDM Model: 95K Year: 2018 Hours: 32,431 Drill Head Hours: 32,431 Compressor Hours: 32,431 Onboard Air Pack: Sullair 1,150 CFM / 500 PSI Air Compressor - Spare Parts available (can provide a detailed list with pricing) - EDM MK2 Core Rod Feeder (For additional $USD350,000) Track Mounted Drill Rig Location: United States of America Learn More

Machine hours	32,431	KILOMETERS	N/A
YEAR	2018	BRAND	EDM
LOCATION	United States of America	MODEL	95K

Add to Wish List Add to Compare

Search results for: 'size rods hire for state'

AUSTRALIA WIDE SERVICE

REQUIRE ASSISTANCE - HAVE A QUESTION?

EQUIPMENT FOR HIRE OR FOR SALE