Search results for: 'hours for size in case rear auburn al'

Make: Caterpillar Model: D10T2 Year: 2020 Hours: 9,500 Includes; - SU Blade & Single Shank - Platforms & Walkways - Self-Closing Gates - Battery & Starter Isolation - Turbo blanket Isolators - Ground & Cab Mounted E-Stops - Fire Suppression - 2x 9kg Fire Extinguishers - Auto Grease System - Platform /Walkway - AM/FM Radio - UHF - Breath Safe - Fast Fuel Fit - LED work lights - Poly Sign Box - Reflective Tape - Caterpillar Fast Fuel System - Good A/C Track Mounted Bulldozer Location: Queensland, Australia Learn More

Make: Caterpillar CAT Model: D10T Year: 2009 Hours: 12,000 Track Mounted Bulldozer Location: Brazil Learn More

Size: 8 1/2" Inch - PDC Condition: Good Drill Bit Location: Western Australia Learn More

Size: 7" Inch - Bit Ring - Drive Sub - Well Looked After Hammer Location: Western Australia Learn More

Sizes; 1x 10mm x 1,800mm (ID) x 12m (5.36mt) 1x 10mm x 1,500mm (ID) x 12m (4.468mt) 1x 10mm x 1,200mm (ID) x 12m (3.581mt) 1x 10mm x 1,000mm (ID) x 12m (2.989mt) 1x 10mm x 900mm (ID) x 12m (2.693mt) 1x 10mm x 700mm (ID) x 12m (2.1mt) 1x 10mm x 600mm (ID) x 12m (1.835mt) - Steel Pipes Spiral Welded (API 5L B C250) - All pipes coated internal/external with Amerlock 2/400 blue & white Large Irrigation Pipe Location: Australia Learn More

Bit 1 Size: 9" Inch - 380 IR Shank - Welded Legs Condition: Used Price: $880 ex GST Bit 2 Size: 9" Inch - 380 IR Shank Condition: Never Used Price: $1,100 ex GST Bit 3 & 4 Size: 9" Inch - 380 IR Shank Quantity: 2 Condition: Good Price: $1,100 ex GST each Hammer Drill Bit Location: Western Australia Learn More

Size: 7" Inch - PDC Condition: Used Drill Bit Location: Western Australia Learn More

Size: 12 1/4" Inch - TCI - Sealed Bearing Condition: Used Rock Roller Bit Location: Western Australia Learn More

Size: 12 1/4" Inch - Milled Teeth - Sealed Bearing Condition: Good Rock Roller Bit Location: Western Australia Learn More

Make: Atlas Copco Model: ROC L8-64 Year: 2007 Hours: 5,380 (Approx. 22,000 total hours) Engine: Caterpillar CAT C13 - Atlas Copco XRV9 Air Compressor - Extensive Parts and Consumables Available (not included but can be negotiated) Track Mounted Reverse Circulation Drill Rig Location: Western Australia Learn More

Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - 1x Set of NQ Jaws *New* - 1x Set of HQ Jaws *New* - Cameron Water Gauge *New* - Wrap Around Mast - SPT Hammer Included - Rod Racks - Suction Hose and 2x Double Braid 1" Inch Duffield Bypass Hoses - 5x 100 mm Augers and 1x Bit Plus Drive Sub - 1 1/2" Inch Centrifugal Pump and Hoses - Plus Camlocks *All New* - 36" Inch & 24" Inch Stilsons - Chain Wrench - 1.5 Metre NMLC Core Barrel Plus 5x 3 Metre NQ Rods - 2x Mud Tanks - 7x5' Foot Box Trailer Tracked Mounted Drill Rig Location: New South Wales, Australia Learn More

Rig Make: UDR Model: 650 Hours: 9,202 - Commissioned Mid 2023 - Onboard PTO Driven Air Compressor - New water pump - New fan belts - New radiator core - Recent service with oil & new filters - New rod & piston seals to main feed Ram - New Dump Mast Ram - New rods & seals to mast raise rams - New side shift ram - New break out ram - New rod crane raise ram - New hydraulic valve blocks in control cabinet for main pump & secondary pump controls - New micro control fine feed controller - Replaced majority of gauges with new - New main rotation shaft seals & speedy sleeves - New main rotation torque control cartridge - New hammer oiler pump - New seats & O rings in majority of valve banks Air Compressor - New Air / Oil separator filter - New Oil stop valve - New Castrol Aircoil 68 synthetic oil - New filters - Recently been serviced by Midcoast Compressors Truck Make: MAN Year: 1997 KM's: 200,000 Type: 8x8 Transmission: Recon 18 Speed Gear Box - Kevrek 1500 Hiab Crane with Winch & Umbilical Cord Remote - Radiator back flushed - New Water Pump - New Fan Belts - New brake boosters on every wheel - New four way valve - New valve on brake pedal - Rebuilt Truck Compressor - New air on drivers seat - New air valves on diff locks / cross locks - New clutch, fly wheel & pressure plate - New bearings & seals in Dana drive box - New oil pump on Dana drive box - New universals on tail shafts - New ram on power steering - New tyres all around - All ball joints on truck replaced that were needed, or new rubbers on them - Recently passed Pit Inspection - 7 months Rego as Plant - No need for overhang permits; within length Truck Mounted Drill Rig Location: New South Wales, Australia Learn More

Make: Caterpillar Model: 14M Year: 2018 Hours: 7,168 - Rear Ripper MS - No EPA Grader Location: Chile Learn More

Drill Rig Make: UDR Model: 1500 Year: 2011 (Rebuilt) Hours: 3,517 Trailer Make: Hold Bros Year: 2013 ATM: 38 Tonne Jack Up Trailer Mounted Drill Rig Location: New South Wales, Australia Learn More

Drill Rig Make: American Augers Model: DD90-DD140 HDD Hours: 2,198 Trailer Make: Fontaine Trailer Company Year: 1992 Trailer Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Gardner Denver Model: FXXDFA Hours: 2,261 - Diesel Driven Skid Mounted Mud Pump Location: Queensland, Australia Learn More

Make: Gardner Denver Model: 5x10 Hours: 33 - Diesel Driven Skid Mounted Mud Pump Location: Queensland, Australia Learn More

Make: Gardner Denver Model: PAH Hours: 72 Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn More

Make: Gardner Denver Model: PAH Hours: 20 Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn More

Type: DCS-S 4-4.7/8" Inch - Comes with 1x Set of Inserts Drilling Collar Slips Casing Slip Bowls Location: Queensland, Australia Learn More