Search results for: 'size hire drill bit'
- Did you mean
- sale hire drill bit
- size high drill bit
- Related search terms
- hire for sale 11355
- hire for sale 1,350
- hire black yellow guppies for sale
- hire for sale 1100
- hire for sale 1000
-
Keypower 6V92TA1400 Skid Mounted Booster *Not Actual Photo of Unit* (FOR HIRE/RENT - POA) (hire-ehub3426)For HireMake: Keypower Model: 6V92TA1400 Max Inlet Pressure: 2,413 kPa / 350 PSI Max. Delivery: 660 l/sec / 1,400 CFM Max. Discharge Pressure: 5,171 / 850 PSI Compression Ratio: 2:1 (Nominal) / 3:1 (Maximum) Bore: 57 mm Stroke: 127 mm Max. Operating Angle: 15 degrees Engine: Detroit 6V92TA Diesel *Not Actual Photo of Unit* Skid Mounted Booster Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Key Power
LOCATION New South Wales, Australia
MODEL 6V92TA1400
-
2004 Cubex QXR 920 Track Mounted Surface Drill Rig ($185,000 ex GST) (sale-ehub3439)For Sale$185,000.00Make: Cubex Model: QXR 920 Year: 2004 (Rebuild 2019) Hours: 16,896 Engine: Caterpillar CAT C15 Rotary Head: Cubex @ 6,230 hours (Rebuilt May 2019) Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM Variable Jaw Rotation: 15 degrees Clamping Force: 288 kN Carousel Capacity: 6 Rods Max. Rod Size: 5" Inch Min. Rod Size: 3.25 " Inch Rod Length: 6 m / 20 ft Onboard Air Compressor: Sullair + Spares Included Track Mounted Surface Drill Rig Location: Western Australia Learn MoreMachine hours 16,896
KILOMETERS N/A YEAR 2004
BRAND Cubex
LOCATION Western Australia
MODEL QXR 920
-
FMC L1122 Horizontal Triplex Piston Pumps (POA) (sale-ehub3435)For Sale$0.00Make: FMC Model: L1122 Stroke Length: 2.75" Inch Piston Diameter: 2.75" Inch Frame Load Rating: 6,000 lbs Internal Gear Ratio: 3.6:1 Intermittent Duty Speed Rating: 1,275 RPM Continuous Duty Speed Rating: 900 RPM Standard Suction Size: 2.50" Inch NPT Standard Discharge Size: 1.25" Inch NPT Number of Pistons: 3 Horizontal Triplex Piston Pump Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND FMC
LOCATION New South Wales, Australia
MODEL L1122
-
2009 Globe Drill KAL 500-CP8 Track Mounted Drill Rig ($650,000 ex GST) (sale-ehub3434)For Sale$650,000.00Make: Globe Drill Model: KAL 500-CP8 Year: 2009 Hours: 27,332 (Lifetime) / Current Hours: 3,406 Engine: Detroit Series 2000 @ 905 HP Engine Hours: 11,982 Onboard Air Capacity: 1,350 CFM / 500 PSI Hole Inclination: 90-50 degrees Rod String: No Rods - Set up for 4 1/2" Inch Rods Depth Capacity On Board: 330 m Overall Width: 3.9 m Compressor Make: Sullair 1,350 CFM 500 PSI Hours: 2,308 Features; - Polyurethane Cyclone - Cone Sample Splitter - Dual Breakout System - Dust Suppression - Carousel - Rod Cage - Overhead Protection - Fire Suppression - Remote Tramming Track Mounted Drill Rig Location: Western Australia Learn MoreMachine hours 27,332
KILOMETERS N/A YEAR 2009
BRAND Globe Drill
LOCATION Western Australia
MODEL KAL 500-CP8
-
Sullair 900 CFM / 350 PSI Air Compressor & Air Research 1809 Booster Mounted on Rod Sloop (FOR HIRE/RENT - POA) (hire-ehub3431)For HireCompressor Make: Sullair 900 CFM 350 PSI Booster Make: Air Research Model: 1809 - Mounted on Rod Sloop Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Sullair
LOCATION New South Wales, Australia
MODEL 900 CFM / 350 PSI
-
Various Size, Shank, Head & Insert Halco & Karbo Drill Bits (POA) (sale-ehub3430)For Sale$0.0074x Halco Mach 44 4 1/2" Inch Convex Domed Condition: New / Used (Rust) 33x Halco Mach 44 4 1/4" Inch Convex Domed Condition: New / Used (Rust) 1x Halco Mach 44 4 1/2" Inch Concave Domed Condition: New 3x Halco Mach 44 4 1/8" Inch Convex Domed Condition: New 34x Halco Mach 303 3 1/2" Inch Convex Ballistic Condition: New 3x Karbo 4 1/2" Inch Convex Condition: New 4x Karbo 4 1/2" Inch Convex Condition: 3x New / 1x Used Various Size, Shank, Head & Insert Drill Bits Location: Canada Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Canada
MODEL Halco Mach 44/303 & Karbo
-
Custom 600 RRD Track Mounted Drill Rig (POA) (sale-ehub3428)For Sale$0.00Make: Custom Model: 600 RRD Motor: 40 HP TEFC Pulling Capacity: 24,000 lbs Lifting Capacity: 24,000 lbs Down Thrust Capacity: 12,500 lbs Rotational Torque: 6,500 ft/lbs Load Sensing Power Limiting Pump: 45 GPM @ 1,700 PSI Load Sensing Diesel Pump: 15 GPM @ 3,500 PSI Fast Feed: 14.79 GPM @ 2,500 PSI Slow Feed: 6.2 GPM @ 2,500 PSI Traction Hydraulic Motor: 14 HP each at 4,000 MASL (Using Diesel Drive) Max. Drilling Air Pressure: 400 PSI Feed Cylinders Combined Bore: 9.8 sq inch Features; - Lubricator - Water Pump - Robust Mine Proven Construction - High Torque Rotation Head - Reversable Heavy Duty Mast - Efficient Electric/Hydraulic Drive - Fully Hydraulic Operation - Compact Size - Fully Variable Rotation Speed (0-24 RPM) Hydraulically Operated Crawlers - Remotely Operated Hydraulic Console for flexibility - Sting Cylinder - Dual Heavy Duty Feed System - 90 Degree Tilt Out Rotation Head - Longitudinal Shift - Side Shift - NEMA 4 - Air Motors for travelling Track Mounted Drill Rig Location: Canada Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Home Made
LOCATION Canada
MODEL 600 RRD
-
2003 SD 100 Track Mounted Drill Rig ($250,000 ex GST) (sale-ehub3425)For Sale$250,000.00Make: SD Model: 100 Year: 2003 Hours: 22,738 (Overall approx.) Engine Hours: 10,793 (New Hour Metre with Current Hours since engine change - 1,977) Onboard Air Capacity: 1,150 CFM / 500 PSI Air Compressor Hours: 12,768 Rotary Head Hours: 2,054 (Since Change Out) Hole Inclination Range: 90-50 degrees Rod String: 4 Met / 6 m Depth Capacity: 60 m Overall Width: 2.95 m - Spare Engine requires rebuild and spares to go with the drill Features - Polyurethane Cyclone - Cone Sample Splitter - Dual Breakout System - Dust Suppression - Carousel - Rod Cage - Overhead Protection - Fire Suppression Track Mounted Drill Rig Location: Western Australia Learn MoreMachine hours 22,738
KILOMETERS N/A YEAR 2003
BRAND Home Made
LOCATION Western Australia
MODEL SD 100
-
2012 Sandvik DR580 Track Mounted Drill Rig ($285,000 ex GST) (sale-ehub3424)For Sale$285,000.00Make: Sandvik Model: DR580 Year: 2012 Hours: 14,931 Midlife Hours: 12,208 (Engine Repairs) - Starter Motor @ 12,637 hours - Rotary Head Changeout @ 11,319 hours - Air Compressor 1350 CFM / 500 PSI Change Out @ 11,013 hours Track Mounted Drill Rig Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2012
BRAND Sandvik
LOCATION Western Australia
MODEL DR580
-
2022 Atlas Copco X-Air 1,100 CFM / 380 PSI Portable Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3425)For HireMake: Atlas Copco Model: X-Air Year: 2022 Hours: 200 1,100 CFM 380 PSI Portable Air Compressor Location: New South Wales, Australia Learn MoreMachine hours 200
KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION New South Wales, Australia
MODEL X-Air
-
2019 Atlas Copco DrillAir XRYS 1260 CD7 1,260 CFM / 550 PSI Skid Mounted Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3424)For HireMake: Atlas Copco Model: DrillAir XRYS 1260 CD7 Year: 2019 Hours: 2,000 1,260 CFM 550 PSI Skid Mounted Air Compressor Location: New South Wales, Australia Learn MoreMachine hours 2,000
KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION New South Wales, Australia
MODEL DrillAir XRYS 1260 CD7
-
Air Research ARC 1809/1310 1,800 CFM / 900 PSI Skid Mounted Booster (FOR HIRE/RENT - POA) (hire-ehub3423)For HireMake: Air Research ARC Model: 1809/1310 Hours: 900 Engine: Detroit 8V92TA Power: 210 HP Weight: 2,400 kg 1,800 CFM 900 PSI Dimensions Length: 1,900 mm Width: 1,500 mm Height: 2,050 mm Skid Mounted Booster Location: New South Wales, Australia Learn MoreMachine hours 900
KILOMETERS N/A YEAR N/A BRAND Air Research
LOCATION New South Wales, Australia
MODEL 1809/1310
-
20 Tonne Payload Remote Control Track Mounted Carrier (FOR HIRE/RENT - POA) (hire-ehub3420)For HireTray Length: 12 m (Not Including Power Pack) Width: 3.2 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL N/A
-
20 Tonne Payload Remote Control Track Mounted Carrier (FOR HIRE/RENT - POA) (hire-ehub3419)For HireTray Length: 10 m (Not Including Power Pack) Width: 2.5 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL N/A
-
14x Lengths of 6 Metre 8" Inch OD 6 5/8" Inch REG Thread Drill Pipe / Rods (POA) (sale-ehub3414)For Sale$0.008" Inch OD 6 5/8" Inch REG Thread Length: 6 Metres Quantity: 14x Lengths Drill Pipe / Rods Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL 8" Inch OD / 6 5/8" Inch REG Thread
-
22x Remet 3 1/2" Inch RC Drill Rods / Pipe (See Description for Pricing) (sale-ehub3379)For Sale$0.00Make: Remet Type: 3 1/2" Inch - 13x Rods at 90% Percent with Seal Type Inner Tubes - 9x Rods at 50% Percent Quantity: 22 Pricing 90% Percent Rods: $390 ex GST each 50% Percent Rods: $175 ex GST each RC Drill Rods / Pipe Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Remet
LOCATION Queensland, Australia
MODEL 3 1/2" Inch
-
6x Sandvik DR560/80 Track Mounted Contour DTH Drill Rigs (FOR HIRE/RENT - POA) (hire-ehub3356)For HireMake: Sandvik Model: DR560/80 Hours: Various Max Feed Rate: 1.3 m/s (257 ft/min) Max Hoisting @ 2,100 RPM: 47 kN (10,600 lbf) Max Pulldown @ 2,100 RPM: 47 kN Top Drive Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM (Variable) Carousel Standard Capacity: 6 Rods (5 Rods for OD 140 mm (5.5" inch) Max Rod Size: 140 mm / 5.5" inch Min Rod Size: 89 mm / 3.5" inch Rod Length: 6.1 m / 20 ft Min Hammer Size: 102 mm / 4" inch Carousel Hole Depth: 42.6 m / 140 ft Max Hole Size: 216 mm / 8.5" inch Min Hole Size: 115 mm / 4.5" inch + More information can be provided Track Mounted Contour DTH Drill Rig Location: Western Australia Learn MoreMachine hours Various
KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Western Australia
MODEL DR560/80
-
2005 UDR1000 / Sandvik DE840 Multipurpose Drill Rig Mounted on MAN 8x4 Truck ($275,000 ex GST) (sale-ehub3353)For Sale$275,000.00Make: UDR / Sandvik Model: 1000 / DE840 Year: 2005 Engine: Cummins 6CTA8.3 - Hydraulic Rod Clamp - Top Drive Rotary Head - Hollow Floating Spindle - Onboard FMC W1122 Bean Pump - Onboard Sullair 1150 CFM / 350 PSI Air Compressor - Still operational but due for a rebuild Includes; - Mast Dump - Rod Spinner - Sandvik DA554 Rod Handler - RC Sampling System - Fire Suppression Truck Make: MAN Type: 8x4 Truck Mounted Multipurpose Drill Rig Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2005
BRAND UDR
LOCATION New South Wales, Australia
MODEL 1000 / Sandvik DE840
-
2015 Rebuilt Dino 250 Track Mounted Drill Rig + Drill Trailer Workshop (POA) (sale-ehub3352)For Sale$0.00Model: Dino 250 Year: 2015 (Rebuilt) Hours: 7,119 Engine: Caterpillar CAT 3412 (Rebuilt) Includes; - Complete set of Drill Rods (200 Metres) - Drill Schematics and Parts List - Complete Service and Works History - All Serial # for Onboard Assets - Onboard Dry Element Dust Suppression Unit - Auto Fire Suppression - Hand Free AUSTEX Break Outs - Onboard Rod Handler - Onboard Rod Storage (150 Metres) - Haul Winch - Wireline Winch (350 Metres) - Remote Wireless Tramming Controls - New Metzke Rotating Splitter - Funk Box Drive - Danfoss and Rexroth Hydraulic Pumps Air Compressor Make: Sullair 900 CFM / 350 PSI - Refurbished Booster Make: Detroit Model: 6V92 Hours: 0 - Rebuilt Track Mounted Drill Rig Location: Western Australia Learn MoreMachine hours 7,119
KILOMETERS N/A YEAR 2015
BRAND N/A
LOCATION Western Australia
MODEL Dino 250
-
3 Metre HQ Drill Rod / Pipe ($110 ex GST per length) (sale-ehub3348)For Sale$110.00Type: HQ Length: 3 Metre Condition: Good Drill Rod / Pipe Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL HQ
Filter