Search results for: 'pipe size 350 brand australia'
- Did you mean
- pipe sale 350 brand australia
- Related search terms
- size export mph sale location
- size explor mpi sale location
- brand green hire for sale
- brand garden hire for sale
- brand gardner hire for sale
-
2007 Drill Rig Mounted on 2007 Isuzu FTS 750 4x4 Table Top Truck ($145,000 ex GST) (sale-ehub4003)For Sale$145,000.00Rig Year: 2007 Hours: 3,000 Engine: Caterpillar (85 HP) Stroke: 3,300 mm - 2 Speed Head Rotation Torque: 2,500/450 Nm Rotation Speed: 140/750 RPM Pullback: 7,000 kg Pull Down: 4,000 kg - Set up for Geotechnical Drilling with Auto SPT - 1x Main Winch - 2x Wireline Winch - Mono Pump - Four Jack Legs - Drilling Rods, Alloy Mud Tanks, Accessories for 50 m (All in Good Condition) Truck Make: Isuzu Model: FTS 750 Year: 2007 KM's: 55,000 Type: 4x4 Table Top Truck Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours 3,000
KILOMETERS 55,000
YEAR 2007
BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
Schramm T660 H Rotadrill Track Mounted Drill Rig (POA) (sale-ehub3996)For Sale$0.00Make: Schramm Model: T660 H Rotadrill Engine: Caterpillar CAT 3406B DITA @ 450 HP Pulldown: 30,000 lbs Pullback: 44,000 lbs Capacity: 5" Inch Rams / 350 m R/C 4 1/2" Inch Remet Rods Stroke: 6.5 m Top Drive: R/C Head Twin Motor 2 Speed / 0-160 RPM @ 38,000 lbs / 0-53 RPM @ 75,000 lbs Onboard Air Compressor: Sullair 900 CFM / 350 PSI Mounting: Caterpillar CAT 325 Wide Track Track Mounted Drill Rig Location: New Zealand Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Schramm
LOCATION New Zealand
MODEL T660 H
-
2023 XCMG XE55U Track Mounted Excavator ($105,000 ex GST) (sale-ehub3991)For Sale$105,000.00Make: XCMG Model: XE55U Year: 2023 Hours: Less than 500 Includes; - Hammer - Auger Driver - 450 mm Auger - 300 mm Auger Track Mounted Excavator Location: New South Wales, Australia Learn MoreMachine hours Less than 500
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL XE55U
-
2x Rebuilt Liebherr R996 Hydraulic Clam Cylinders ($11,000 ex GST each) (sale-ehub3987)For Sale$11,000.00Make: Liebherr Model: R996 - Rebuilt - To fit Liebherr Face Shovel Quantity: 2 Hydraulic Clam Cylinders Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Liebherr
LOCATION Western Australia
MODEL R996
-
2007 Atlas Copco RD20-III Carrier Mounted Drill Rig (POA) (sale-ehub3983)For Sale$0.00Make: Atlas Copco Model: RD20-III Year: 2007 Hours: 7,500 - In Good Working Order - Full Service Report Available This used 2007 RD20 Range III Atlas Copco Rig is a powerful and versatile drilling machine, ideal for a wide range of applications. Equipped with on IR 1,250 CFM / 350 PSI Air Compressor, this rig delivers exceptional performance and efficiency. Powered by a robust CAT C13 engine, the rig ensures smooth operation and ample power. The Cummins QSK19 deck engine further enhances its performance capabilities, delivering 755 HP for demanding drilling tasks. With a substantial pullback capacity of 120,000 lbs (54,446 kg), this rig can handle tough drilling conditions with ease. Mounted on a crane carrier truck, this RD20 III Atlas Copco Rig provides excellent mobility and stability. The rig has been meticulously maintained to ensure optimal condition and longevity. Its clean appearance reflects the owner’s commitment to proper care and maintenance. Carrier Mounted Drill Rig Location: New South Wales, Australia Learn MoreMachine hours 7,500
KILOMETERS N/A YEAR 2007
BRAND Atlas Copco
LOCATION New South Wales, Australia
MODEL RD20-III
-
2022 Rebuilt SPM Weir TWS2250 Skid Mounted Jack Up Frac Mud Pump (FOR HIRE/RENT - POA) (hire-ehub3982)For Sale$0.00Make: SPM Weir Model: TWS2250 Year: 2022 (Reman Rebuild) Hours: Approx. 7,000 Engine: Caterpillar CAT C32 (Rated @ 1,350 HP) Transmission: Allison 8000 Series Auto (DP8962R) Dimensions; Length: 9,135 mm (Overall) Width: 2,505 mm Height: 2,615 mm (On Ground) Height: 4,280 mm (Raised) Weight: 20,000 kg - When raised has enough height for a trailer of 1,500 mm to drive underneath Skid Mounted Jack Up Frac Mud Pump Location: Queensland, Australia Learn MoreMachine hours Approx. 7,000
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL SPM Weir TWS2250
-
2022 Rebuilt SPM Weir TWS2250 Skid Mounted Jack Up Frac Mud Pump (POA) (sale-ehub3982)For Sale$0.00Make: SPM Weir Model: TWS2250 Year: 2022 (Reman Rebuild) Hours: Approx. 7,000 Engine: Caterpillar CAT C32 (Rated @ 1,350 HP) Transmission: Allison 8000 Series Auto (DP8962R) Dimensions; Length: 9,135 mm (Overall) Width: 2,505 mm Height: 2,615 mm (On Ground) Height: 4,280 mm (Raised) Weight: 20,000 kg - When raised has enough height for a trailer of 1,500 mm to drive underneath Skid Mounted Jack Up Frac Mud Pump Location: Queensland, Australia Learn MoreMachine hours Approx. 7,000
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL SPM Weir TWS2250
-
2010 Soilmec SM-21 Track Mounted Rotary Drill Rig (POA) (sale-ehub3978)For Sale$0.00Make: Soilmec Model: SM-21 Year: 2010 Hours: 132 - Brand New Engine (Under Warranty) - Rebuilt Rotation Head - New Hydraulic Track Mounted Rotary Drill Rig Location: Western Australia Learn MoreMachine hours 132
KILOMETERS N/A YEAR 2010
BRAND Soilmec
LOCATION Western Australia
MODEL SM-21
-
2010 IMS Bulwark 200 20 Tonne Work-Over Drill Rig ($75,000 ex GST) (sale-ehub3977)For Sale$75,000.00Make: IMS Model: Bulwark 200 Year: 2010 Max Operating Wind Velocity: 12.5 m/sec Max Rated Hook Load: 196kN Height: 16 Metres 20 Tonne Work-Over Drill Rig Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2010
BRAND IMS
LOCATION Queensland, Australia
MODEL Bulwark 200
-
Caterpillar CAT C11 Skid Mounted Engine with Integrated 800 Litre Diesel Tank ($39,500 ex GST) (sale-ehub3976)For Sale$39,500.00Make: Caterpillar Model: C11 Hours: 17,316 - With Integrated 800 Litre Diesel Tank - Dyno Test Results and ECM Available 350 HP 1,800-2,100 Complete Package with Control Panel and Starter and Alternator Dimensions; Length: Overall 250 cm (Take off 50 cm if you relocate Air Cleaner) Height to top of Valve Cover (Engine): 120 cm To top of Pre-Cleaner: 180cm To top of Muffler: 220 cm Width: 110 cm (Radiator) Skid Mounted Engine Location: Australia Learn MoreMachine hours 17,316
KILOMETERS N/A YEAR N/A BRAND Caterpillar CAT
LOCATION Australia
MODEL C11
-
2016 Safe-T BHA STS R1 Skid Mounted Jack Up Drill Rod Sloop ($120,000 ex GST) (sale-ehub3973)For Sale$120,000.00Make: Safe-T Model: BHA STS R1 Year: 2016 - Surplus to requirements Skid Mounted Jack Up Drill Rod Sloop Location: Tasmania, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2016
BRAND N/A
LOCATION Tasmania, Australia
MODEL Safe-T BHA STS R1
-
Schramm T685 Drill Rig Mounted on 2008 MAN TGS 41.480 8x8 Truck (POA) (sale-ehub3967)For Sale$0.00Drill Rig Make: Schramm Model: T685W Year: 2007 Rig Serial Number: J124-B103 Engine: Cummins QSK19 (Hours: 500 - Brand New) Pullback Rating (Hoist Capacity): 33,884 kg Compressor: 2022 (Rebuild) Sullair DC 1,350 CFM / 500 PSI with Caterpillar C18 Compressor Hours: 3,200 (Shown) Compressor Serial Number: 200803290001 Triplex Pump: Bean 535 Pump Table Opening: 20" Inch Dual Breakouts: Metzke Hydraulic Breakout Tong Clutch: Direct Drive Set Up Rotation Head: Airdrill - Fire Suppression - Fold Down Walkways - Guarding (Spin cage with inter lock) - KL Road Loader (Hydraulic fixed) - 685WS Mast Truck Make: MAN Model: TGS 41.480 Year: 2008 KM's: 70,000 Transmission: Automatic Type: 8x8 - Mine Spec Truck Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours 3,200 (Compressor)
KILOMETERS 70,000
YEAR 2008
BRAND Schramm
LOCATION Queensland, Australia
MODEL T685
-
4,000 Litre Skid Mounted Tank ($4,500 ex GST) (sale-ehub3964)For Sale$4,500.00Capacity: 4,000 Litres Skid Mounted Tank Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL 4,000 Litre
-
Hydramaster 2000 Cable Tool Drill Rig Mounted on 1998 International Acco 4x2 Truck & Tri Axle Trailer ($99,000 ex GST) (sale-ehub3957)For Sale$99,000.00Rig Make: Hydramaster Model: 2000 - Fully Tooled & Spares - Recently painted Truck Make: International Model: Acco Year: 1998 KM's: 506,309 Type: 4x2 Engine: Cummins 300 HP Gearbox: 9 Speed Tri Axle Trailer - Near New - Set up for cable tool equipment Condition: Good Truck Mounted Cable Tool Drill Rig Tri Axle Trailer Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS 506,309
YEAR 1998
BRAND Hydramaster
LOCATION Queensland, Australia
MODEL 2000
-
2011 Hanjin D&B 1070CP Skid Mounted Air Compressor ($92,500 ex GST) (sale-ehub3953)For Sale$92,500.00Make: Hanjin Model: D&B 1070CP Year: 2011 Hours: 3,443 Engine: Hyundai D6CC Power: 1,800 RPM / 530 HP Skid Mounted Air Compressor Location: Western Australia Learn MoreMachine hours 3,443
KILOMETERS N/A YEAR 2011
BRAND Hanjin
LOCATION Western Australia
MODEL D&B 1070CP
-
Schramm 685 Track Mounted Drill Rig with Onboard Air Compressor ($1,200,000 ex GST) (sale-ehub3582)For Sale$1,200,000.00Rig Make: Schramm Model: 685 Year: 1996 Hours: 2,500 (Since Rebuild) Engine: Cummins K19 Accessories; - FOPS - Rod Rack - 4x Levelling Jacks - In Mast Make/Break Rod Break Out System - Rotating Cyclone Set Up on Metz Manipulator - Airdrill Maker Breaker - Air Spanner - KL Rod Handler Set to 4.5" Inch Pipe - Dual RC Swivel and Auto Blow Down - ROPS Air-Conditioned Drillers Cabin - Complete Re-Hose 11/25 - Fire Suppression Air Compressor Make: Sullair 1,150 CFM / 500 PSI Water Capacity: Approx. 500 Litres Dimensions; Height: 4.6 m Width: 4.0 m Track Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours 2,500
KILOMETERS N/A YEAR 1996
BRAND Schramm
LOCATION Queensland, Australia
MODEL 685
-
Dynaset HPW160-18-18-UV Water Pump ($2,200 ex GST) (sale-ehub3942)For Sale$2,200.00Make: Dynaset Part Number: HPW160-18-18-UV - New Water Pump Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Dynaset
LOCATION Queensland, Australia
MODEL HPW160-18-18-UV
-
Epiroc Pit Viper 275 Drill Rig Drive Shaft ($500 ex GST) (sale-ehub3941)For Sale$500.00Make: Epiroc Model: Pit Viper 275 Part Number: 2657966534 Drill Rig Drive Shaft Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Epiroc
LOCATION Queensland, Australia
MODEL Pit Viper 275
-
Epiroc 2659602321 Controller ($1,980 ex GST) (sale-ehub3940)For Sale$1,980.00Make: Epiroc Part Number: 2659602321 Controller Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Epiroc
LOCATION Queensland, Australia
MODEL 2659602321
-
2x Epiroc 2657338238 Controllers ($1,000 ex GST each) (sale-ehub3939)For Sale$1,000.00Make: Epiroc Part Number: 2657338238 Quantity: 2 Controller Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Epiroc
LOCATION Queensland, Australia
MODEL 2657338238
Filter