Search results for: 'size export mph sale location'
- Related search terms
- sale"+and+"x"="y) UNION ALL SELECT NULL#
- sale"+and+"x"="y) UNION ALL SELECT NULL,NULL,NULL,NULL,NULL#
- sale effects hire cholesterol
- sale peg round hire llc
- sale wrap on rent
-
Hagglunds Track Mounted All Terrain Vehicle ($7,500 ex GST) (sale-ehub4027)For Sale$7,500.00Make: Hagglunds Model: BV 206 - Blown Turbo - Needs Track Repair - Included Track Mounted Carrier Track Mounted All Terrain Vehicle Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Hagglunds
LOCATION Western Australia
MODEL N/A
-
Epiroc Pit Viper 271 Carousel Assembly (POA) (sale-ehub4025)For Sale$0.00Make: Epiroc Model: Pit Viper 271 Part Number: #2657647976 Carousel Assembly Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Epiroc
LOCATION Western Australia
MODEL Pit Viper 271
-
Doosan Air End Suitable for PA536, XHP1250 & XHP1170 Air Compressors ($48,000 ex GST) (sale-ehub4024)For Sale$48,000.00Make: Doosan Models (Suitable): PA536, XHP1250 & XHP1170 - Brand New - Tailored to meet specific requirements - Inclusive of Warranty Air End Location: Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Doosan
LOCATION Australia
MODEL PA536, XHP1250 & XHP1170
-
2020 Komatsu WA 900-8 Wheel Loader (POA) (sale-ehub4018)For Sale$0.00Make: Komatsu Model: WA 900-8 Year: 2020 Hours: 14,212 Wheel Loader Location: United States of America Learn MoreMachine hours 14,212
KILOMETERS N/A YEAR 2020
BRAND Komatsu
LOCATION United States of America
MODEL WA 900-8
-
2006 Caterpillar CAT C15 Skid Mounted Engine ($59,000 ex GST) (sale-ehub4016)For Sale$59,000.00Make: Caterpillar Model: C15 Year: 2006 Hours: 1,533 • 440 HP @ 2,100 RPM • 1482LB-FT @ 1,400 RPM • Air to Air intercooled • 12 Volt (We can covert to 24 Volt if required) • SAE #1 flywheel housing multi fit industrial flywheel. • If required, we can supply and install a Caterpillar Air Compressor to the motor which runs off the auxiliary drive. The motor has been removed from the unit and fully workshop inspected and run up under load on the Dyno, results are as follows: Workshop inspection: • Intake manifold clean. • Cylinder head and rocker gear clean, no moisture or sludge, tune ok. • Turbocharge in nice condition, no excessive shaft play. • Camshaft in nice condition, no pitting • Crankshaft in good condition (Standard) • Main bearings and Con rod bearings in good condition – minimal wear • Crankshaft end float within spec Load test Report • Oil pressure: Cold Idle 70psi / Cold Top Revs 85psi / Hot Idle 50psi / Hot Top Revs 75psi • Water temps: Top Radiator 92 degrees. Bottom Radiator 69 degrees. • Thermostat opened and engine recovered correctly. • Turbocharger boost: 23 PSI @ 2,100 RPM • Breathing/ Blow by: 20 mm @ idle 30 mm @ 1,200 RPM 50 mm @ 1,350 RPM. 120 mm @ 1,800 RPM. • Smoke condition: small amount of black on startup, none at idle and very small white under full load. Skid Mounted Engine Location: Queensland, Australia Learn MoreMachine hours 1,400
KILOMETERS N/A YEAR 2006
BRAND Caterpillar CAT
LOCATION Queensland, Australia
MODEL C15
-
2010 Ubuilt Cassady CTU Coil Tubing Unit Mounted on 2005 Ensign Carrier ($295,000 ex GST) (sale-ehub4015)For Sale$295,000.00Make / Model: Ubuilt Cassady CTU Carrier & Booster OD Year: 2010 Hours: 310 Engine: John Deere ATM: 61,500 kg Trailer Make: Ensign Model: C.T. 1000 Year: 2005 Tyre Size: 275/70R22.5 Rim Size: 8.25x22.5 Axle Group Load Carrying Capacity: 37,500 kg - Handrail and Stair Upgrade by Obadare CTU Coil Tubing Unit Carrier Mounted Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2010
BRAND N/A
LOCATION Queensland, Australia
MODEL Ubuilt Cassady CTU Carrier & Booster OD
-
2009 & 2018 Caterpillar CAT D8T Track Mounted Bulldozer (POA) (sale-ehub4005)For Sale$0.00Make: Caterpillar Model: D8T Year: 2009 & 2018 Hours; 2009: 10,723 2018: 15,100 - EPA Tier 3 (2009) / Tier 3 (2018) - MS Ripper (2009) - SS Ripper (2018) Track Mounted Bulldozer Location: Chile Learn MoreMachine hours 10,723 & 15,100
KILOMETERS N/A YEAR 2009
BRAND Caterpillar CAT
LOCATION Chile
MODEL D8T
-
2007 Drill Rig Mounted on 2007 Isuzu FTS 750 4x4 Table Top Truck ($145,000 ex GST) (sale-ehub4003)For Sale$145,000.00Rig Year: 2007 Hours: 3,000 Engine: Caterpillar (85 HP) Stroke: 3,300 mm - 2 Speed Head Rotation Torque: 2,500/450 Nm Rotation Speed: 140/750 RPM Pullback: 7,000 kg Pull Down: 4,000 kg - Set up for Geotechnical Drilling with Auto SPT - 1x Main Winch - 2x Wireline Winch - Mono Pump - Four Jack Legs - Drilling Rods, Alloy Mud Tanks, Accessories for 50 m (All in Good Condition) Truck Make: Isuzu Model: FTS 750 Year: 2007 KM's: 55,000 Type: 4x4 Table Top Truck Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours 3,000
KILOMETERS 55,000
YEAR 2007
BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
TT300 Trailerised Drill Rig + Volvo FH12 460 Truck with Atlas Copco XRV1200 Air Compressor & More Package (POA) (sale-ehub3999)For Sale$0.00Rig Model: TT300 Hours: 18 Engine: Deutz F6L912 / 66 kW Rated Depth Capacity: 300 m Feed Cylinder: 100 mm Barrel / 70 mm Shaft / 4 m Stroke Outrigger (Jacks): 4x Boxed Outriggers with 800 m Stroke Foam Pump: 21 Litre per min / 35 bar Foam/Water Tank: 120 Litre Axles: 2x 5 Tonne Air Braked Axles Tower: Direct on Cylinder / Triangle Shape Winch: 1 Tonne Push Down Force: 5,000 kgf @ 175 bar Pull Up Force: 13,000 kgf @ 175 bar Tilt Cylinders: 2x 80 Barrel 50 Shaft Breakout: 300 mm Stroke Cylinder Hydraulic Oil Tank Capacity: 330 Litres - Hydraulic Oil Cooler - Extended Tower to accommodate 4 m Stroke Cylinder - Spanners Included: 1x Breakout / 2x Keeper / 3x Hammer Modifications; - Hydraulically Tilt Rotary Head - Rotary changed to geared Rotary Head with Hollow Spindle (8,000 Nm Torque) - Including 2x Eaton Hydraulic Motors - Side Shift (on rotary head – opens up the tower for longer casing, etc.) Support Truck Make: Volvo Model: FH12 460 KM’s: 1,040,378 Type: 8x4 Air Compressor Make: Atlas Copco Model: XRV1200 Year: 2020 Hours: 122 Engine: Cummins Pressure: 22.7 bar / 330 PSI Engine/Motor Speed: 1,900 RPM Engine/Motor Power: 325 kW / 430 HP 1,200 CFM / 330 PSI - Included Drill Bits, Rods and Drilling Equipment Trailerised Drill Rig Support Truck Air Compressor Package Location: New Zealand Learn MoreMachine hours 18
KILOMETERS 1,040,378
YEAR 2020
BRAND N/A
LOCATION New Zealand
MODEL TT300
-
Schramm T660 H Rotadrill Track Mounted Drill Rig (POA) (sale-ehub3996)For Sale$0.00Make: Schramm Model: T660 H Rotadrill Engine: Caterpillar CAT 3406B DITA @ 450 HP Pulldown: 30,000 lbs Pullback: 44,000 lbs Capacity: 5" Inch Rams / 350 m R/C 4 1/2" Inch Remet Rods Stroke: 6.5 m Top Drive: R/C Head Twin Motor 2 Speed / 0-160 RPM @ 38,000 lbs / 0-53 RPM @ 75,000 lbs Onboard Air Compressor: Sullair 900 CFM / 350 PSI Mounting: Caterpillar CAT 325 Wide Track Track Mounted Drill Rig Location: New Zealand Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Schramm
LOCATION New Zealand
MODEL T660 H
-
Tulsa Triplex TT-560 Skid Mounted Triplex Mud Pump (POA) (sale-ehub3995)For Sale$0.00Make: Tulsa Triplex Model: TT-560 Engine: Caterpillar CAT C15 Skid Mounted Mud Pump Location: New Zealand Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New Zealand
MODEL TT-560
-
2017 Sandman Mission Magnum Sandmaster 8x10x14 Trailerised Mud Pump ($67,500 ex GST) (sale-ehub3994)For Sale$67,500.00Mud Pump Make: Sandman Model: Mission Magnum Sandmaster 8x10x14 Year: 2017 Engine: Cummins 6 Cylinder Diesel w/ Clutch - 8 Valve Discharge Manifold on back - 2x 8 Valve Suction Manifold on each side - Flow Meter Trailer Year: 2012 - Pindle Hitch Dimensions; Width: 7.6' Length: 16' Tyres: 245/70R17.5" Trailerised Mud Pump Location: New Zealand Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2017
BRAND N/A
LOCATION New Zealand
MODEL Mission Magnum Sandmaster 8x10x14
-
Baoji Oilfield Machinery F-800 Skid Mounted Mud Pump (POA) (sale-ehub3993)For Sale$0.00Make: Baoji Oilfield Machinery Model: F-800 Skid Mounted Mud Pump Location: New Zealand Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New Zealand
MODEL F-800
-
2007 HD Engineering HR9000 Rotation Head (POA) (sale-ehub3992)For Sale$0.00Make: HD Engineering Model: HR9000 Year: 2007 Rotation Head Location: New Zealand Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2007
BRAND N/A
LOCATION New Zealand
MODEL HR9000
-
2023 XCMG XE55U Track Mounted Excavator ($105,000 ex GST) (sale-ehub3991)For Sale$105,000.00Make: XCMG Model: XE55U Year: 2023 Hours: Less than 500 Includes; - Hammer - Auger Driver - 450 mm Auger - 300 mm Auger Track Mounted Excavator Location: New South Wales, Australia Learn MoreMachine hours Less than 500
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL XE55U
-
2012 ZJ50D/3150 Drill Rig (FOR HIRE/RENT - POA) (hire-ehub3991)For HireRig Model: ZJ50D/3150 Year: 2012 Mast Model: JJ315/45-K6 Substructure Model: DZ3159-S Drawworks Model: JC50D Power: 1,500 HP Rotary Table Model: ZP-375 Full Opening: 37.5” Inch Rotary Speed: 300 RPM Mud Pump Power: 1,600 HP Stroke: 120 RPM Working Pressure: 5,000 PSI Quantity: 2x Mud Tank Shaker Tank: 25 CuM Intermediate Tank: 40 CuM Suction and Mixing Tank: 20 CuM Solids Control - 3x Shale Shaker - 1x Mud Cleaner - 1x Centrifuge Drill Rig Location: Japan Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Japan
MODEL ZJ50D/3150
-
10x 2021 Komatsu HD465-7E0 Dump Trucks (POA) (sale-ehub3989)For Sale$0.00Make: Komatsu Model: HD465-7E0 Year: 2021 Hours: 9,000 - 17,280 Quantity: 10 Dump Trucks Location: China Learn MoreMachine hours 9,000 - 17,280
KILOMETERS N/A YEAR 2021
BRAND Komatsu
LOCATION China
MODEL HD465-7E0
-
2x Rebuilt Liebherr R996 Hydraulic Clam Cylinders ($11,000 ex GST each) (sale-ehub3987)For Sale$11,000.00Make: Liebherr Model: R996 - Rebuilt - To fit Liebherr Face Shovel Quantity: 2 Hydraulic Clam Cylinders Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Liebherr
LOCATION Western Australia
MODEL R996
-
5x 2018 & 3x 2019 Caterpillar CAT 745 Dump Trucks (POA) (sale-ehub3984)For Sale$0.00Make: Caterpillar Model: 745 Year: 2018 & 2019 Quantity: 3x 2019 / 5x 2018 - No EPA or CE Condition: Excellent & Good Tyres Dump Trucks Location: Chile Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2018
BRAND Caterpillar
LOCATION Chile
MODEL 745
-
2007 Atlas Copco RD20-III Carrier Mounted Drill Rig (POA) (sale-ehub3983)For Sale$0.00Make: Atlas Copco Model: RD20-III Year: 2007 Hours: 7,500 - In Good Working Order - Full Service Report Available This used 2007 RD20 Range III Atlas Copco Rig is a powerful and versatile drilling machine, ideal for a wide range of applications. Equipped with on IR 1,250 CFM / 350 PSI Air Compressor, this rig delivers exceptional performance and efficiency. Powered by a robust CAT C13 engine, the rig ensures smooth operation and ample power. The Cummins QSK19 deck engine further enhances its performance capabilities, delivering 755 HP for demanding drilling tasks. With a substantial pullback capacity of 120,000 lbs (54,446 kg), this rig can handle tough drilling conditions with ease. Mounted on a crane carrier truck, this RD20 III Atlas Copco Rig provides excellent mobility and stability. The rig has been meticulously maintained to ensure optimal condition and longevity. Its clean appearance reflects the owner’s commitment to proper care and maintenance. Carrier Mounted Drill Rig Location: New South Wales, Australia Learn MoreMachine hours 7,500
KILOMETERS N/A YEAR 2007
BRAND Atlas Copco
LOCATION New South Wales, Australia
MODEL RD20-III
Filter