Search results for: 'forc revers r poa 20 for state'

Make: Ferrari Type: 360 Hours: Very Low Engine: Lombardini - 3 Forward and 3 Reverse Gears - Added Depth Control Wheels - Ideal for Professional Market Garden Rotary Hoe Location: Western Australia Learn More

Make: Hydco Model: 1000H Year: 2008 Hours: 2,638 (Since new engine and hydraulic pumps were fitted in 2025) Engine: Cummins 6CTA (2024) Onboard Air Compressor: Sullair 1,150 CFM / 350 PSI & 900 CFM / 500 PSI Compressor Hours: 2,130 Compressor Engine: Caterpillar CAT C15 Drilling Capacity; HQ: 1,000 m NQ: 1,500 m PQ: 600 m RC Features; - Harlsan Auto Blow Up and Blowdown - Horizontal Pipe - KL Rod Handler - Hydraulic Breakouts - Hydraulic Spanners - Safety Cage with Interlock - Quick Access Mountable Stuffing Box Assembly - Fire Suppression - Dust Suppression - FMC Bean Pump for Diamond Drilling - FMC Dual Pump for Water Injection - Hydraulic Foot Clamps - Diamond Drilling Safety Cage - Diamond Drilling Platform - Storage Area with Safety Rails and Access Ladders - Refurbished Cyclone - New Cone Splitter - New Track Chains and Rollers - 300 Metres of 4.5" Inch Remet Rods - Airdrill 670 Hammers & Bits - Other specific Critical Spares including Drill Head, Rotation Motors, Handler Spares, etc. *The rig has recently undergone a major preventative maintenance overhaul with scheduled rebuilds completed on the drill; head, ropes, sheeve wheel bearings, traveling block bearings and rod handler overhaul *Setup for mainly RC however has the diamond capabilities & equipment *The rig has recently been completing RC holes to depths of 450m with a Diamond *Willing to sell in a complete kit ready to drill with a Tatra 8x8 Custom Support Truck and all the equipment ready to drill Track Mounted Drill Rig Location: Western Australia Learn More

Make: Keypower Model: 6V92TA1400 Max Inlet Pressure: 2,413 kPa / 350 PSI Max. Delivery: 660 l/sec / 1,400 CFM Max. Discharge Pressure: 5,171 / 850 PSI Compression Ratio: 2:1 (Nominal) / 3:1 (Maximum) Bore: 57 mm Stroke: 127 mm Max. Operating Angle: 15 degrees Engine: Detroit 6V92TA Diesel *Not Actual Photo of Unit* Skid Mounted Booster Location: New South Wales, Australia Learn More

Make: Gardner Denver Model: PZ-7 Year: 2014 - Triplex w/ Forged Steel Fluid End & Quick Change Caps - 5M Pulsation Dampener - Oteco 3" Inch Shear Relief Valve - Pressure Gauge - Mission 6x5 Charge Pump - Fitted with 7" Inch Liners & Pistons - No Engine or Transmission Condition: Good Skid Mounted Mud Pump Location: United States of America Learn More

Make: Cubex Model: QXR 920 Year: 2004 (Rebuild 2019) Hours: 16,896 Engine: Caterpillar CAT C15 Rotary Head: Cubex @ 6,230 hours (Rebuilt May 2019) Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM Variable Jaw Rotation: 15 degrees Clamping Force: 288 kN Carousel Capacity: 6 Rods Max. Rod Size: 5" Inch Min. Rod Size: 3.25 " Inch Rod Length: 6 m / 20 ft Onboard Air Compressor: Sullair + Spares Included Track Mounted Surface Drill Rig Location: Western Australia Learn More

Make: FMC Model: L1122 Stroke Length: 2.75" Inch Piston Diameter: 2.75" Inch Frame Load Rating: 6,000 lbs Internal Gear Ratio: 3.6:1 Intermittent Duty Speed Rating: 1,275 RPM Continuous Duty Speed Rating: 900 RPM Standard Suction Size: 2.50" Inch NPT Standard Discharge Size: 1.25" Inch NPT Number of Pistons: 3 Horizontal Triplex Piston Pump Location: New South Wales, Australia Learn More

Jaw Crusher Make: Jacques Bin Capacity: 8 Tonne - 20x12 Two Jaw Opening - Vibrating Feed Bin - Discharge Conveyor - All Electric Run off 100 kVA Generator - Wired Ready to Start Condition: Well Maintained Granulator Make: Baxter - 30x6 Jaw Opening - Discharge Conveyor - All Electric Run off 100 kVA Generator Condition: Very Well Maintained Included Items; - Conveyor - Grizzly Screen - 7 Metre x 300 mm Conveyor Belt Location: Victoria, Australia Learn More

74x Halco Mach 44 4 1/2" Inch Convex Domed Condition: New / Used (Rust) 33x Halco Mach 44 4 1/4" Inch Convex Domed Condition: New / Used (Rust) 1x Halco Mach 44 4 1/2" Inch Concave Domed Condition: New 3x Halco Mach 44 4 1/8" Inch Convex Domed Condition: New 34x Halco Mach 303 3 1/2" Inch Convex Ballistic Condition: New 3x Karbo 4 1/2" Inch Convex Condition: New 4x Karbo 4 1/2" Inch Convex Condition: 3x New / 1x Used Various Size, Shank, Head & Insert Drill Bits Location: Canada Learn More

Make: Custom Model: 600 RRD Motor: 40 HP TEFC Pulling Capacity: 24,000 lbs Lifting Capacity: 24,000 lbs Down Thrust Capacity: 12,500 lbs Rotational Torque: 6,500 ft/lbs Load Sensing Power Limiting Pump: 45 GPM @ 1,700 PSI Load Sensing Diesel Pump: 15 GPM @ 3,500 PSI Fast Feed: 14.79 GPM @ 2,500 PSI Slow Feed: 6.2 GPM @ 2,500 PSI Traction Hydraulic Motor: 14 HP each at 4,000 MASL (Using Diesel Drive) Max. Drilling Air Pressure: 400 PSI Feed Cylinders Combined Bore: 9.8 sq inch Features; - Lubricator - Water Pump - Robust Mine Proven Construction - High Torque Rotation Head - Reversable Heavy Duty Mast - Efficient Electric/Hydraulic Drive - Fully Hydraulic Operation - Compact Size - Fully Variable Rotation Speed (0-24 RPM) Hydraulically Operated Crawlers - Remotely Operated Hydraulic Console for flexibility - Sting Cylinder - Dual Heavy Duty Feed System - 90 Degree Tilt Out Rotation Head - Longitudinal Shift - Side Shift - NEMA 4 - Air Motors for travelling Track Mounted Drill Rig Location: Canada Learn More

Make: Atlas Copco Model: X-Air Year: 2022 Hours: 200 1,100 CFM 380 PSI Portable Air Compressor Location: New South Wales, Australia Learn More

Make: Atlas Copco Model: DrillAir XRYS 1260 CD7 Year: 2019 Hours: 2,000 1,260 CFM 550 PSI Skid Mounted Air Compressor Location: New South Wales, Australia Learn More

Tray Length: 12 m (Not Including Power Pack) Width: 3.2 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn More

Tray Length: 10 m (Not Including Power Pack) Width: 2.5 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn More

8" Inch OD 6 5/8" Inch REG Thread Length: 6 Metres Quantity: 14x Lengths Drill Pipe / Rods Location: New South Wales, Australia Learn More

Make: DB 2-Shaft Screening Buckets BS 04/2 Capacity: 0.05 m3 Screening Area: 300 x 400 mm Weight: 140 kg BS 06/2 Capacity: 0.07 m3 Screening Area: 300 x 560 mm Weight: 175 kg BS 08/2 Capacity: 0.09 m3 Screening Area: 300 x 760 mm Weight: 205 kg BS 10/2 Capacity: 0.12 m3 Screening Area: 300 x 960 mm Weight: 240 kg 3-Shaft Screening Buckets BS 06/3 Capacity: 0.12 m3 Screening Area: 430 x 560 mm Weight: 240 kg BS 08/3 Capacity: 0.17 m3 Screening Area: 430 x 760 mm Weight: 290 kg BS 10/3 Capacity: 0.22 m3 Screening Area: 430 x 960 mm Weight: 360 kg BS 12/3 Capacity: 0.25 m3 Screening Area: 430 x 1,160 mm Weight: 405 kg BS 14/3 Capacity: 0.30 m3 Screening Area: 430 x 1,360 mm Weight: 450 kg BS 16/3 Capacity: 0.34 m3 Screening Area: 430 x 1,560 mm Weight: 510 kg 4-Shaft Screening Buckets BS 10/4 Capacity: 0.35 m3 Screening Area: 615 x 960 mm Weight: 560 kg BS 12/4 Capacity: 0.40 m3 Screening Area: 615 x 1,160 mm Weight: 600 kg BS 14/4 Capacity: 0.45 m3 Screening Area: 615 x 1,360 mm Weight: 660 kg BS 16/4 Capacity: 0.50 m3 Screening Area: 615 x 1,560 mm Weight: 720 kg 5-Shaft Screening Buckets BS 12/5 BS 14/5 BS 16/5 6-Shaft Screening Buckets BS 14/6 BS 16/6 Screening Bucket Location: Slovakia Learn More

Make: Worldpoly Model: Poly Force 500 Year: 2020 Hours: 148 #WP500 Voltage V/P/Hz: 415/3/50 Electric Power: 9 kW Net Weight: 3,300 kg Track Mounted Welding Machine Location: Queensland, Australia Learn More

Make: Sandvik Model: DR560/80 Hours: Various Max Feed Rate: 1.3 m/s (257 ft/min) Max Hoisting @ 2,100 RPM: 47 kN (10,600 lbf) Max Pulldown @ 2,100 RPM: 47 kN Top Drive Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM (Variable) Carousel Standard Capacity: 6 Rods (5 Rods for OD 140 mm (5.5" inch) Max Rod Size: 140 mm / 5.5" inch Min Rod Size: 89 mm / 3.5" inch Rod Length: 6.1 m / 20 ft Min Hammer Size: 102 mm / 4" inch Carousel Hole Depth: 42.6 m / 140 ft Max Hole Size: 216 mm / 8.5" inch Min Hole Size: 115 mm / 4.5" inch + More information can be provided Track Mounted Contour DTH Drill Rig Location: Western Australia Learn More

Model: Dino 250 Year: 2015 (Rebuilt) Hours: 7,119 Engine: Caterpillar CAT 3412 (Rebuilt) Includes; - Complete set of Drill Rods (200 Metres) - Drill Schematics and Parts List - Complete Service and Works History - All Serial # for Onboard Assets - Onboard Dry Element Dust Suppression Unit - Auto Fire Suppression - Hand Free AUSTEX Break Outs - Onboard Rod Handler - Onboard Rod Storage (150 Metres) - Haul Winch - Wireline Winch (350 Metres) - Remote Wireless Tramming Controls - New Metzke Rotating Splitter - Funk Box Drive - Danfoss and Rexroth Hydraulic Pumps Air Compressor Make: Sullair 900 CFM / 350 PSI - Refurbished Booster Make: Detroit Model: 6V92 Hours: 0 - Rebuilt Track Mounted Drill Rig Location: Western Australia Learn More

Drill Rig Make: NW Model: 500 - Heli / Man Portable 126 HP Included; - Hydraulic Control Panel - Hydraulic Reservoir c/w Oil to Water Heat Exchanger - 3x Kubota Turbo Charged Diesel Engines @ 42 HP - Light Weight 39 GPM Down Hole Pump - 220 Litre Fuel Tank and AL Stand Feed Frame Complete - Wireline Winch with 750 m 3/16" Inch Wireline Installed - Top Drive Drill Head with Adapter Sub for HWL Drill Rod - Two Rotation Motors for NWL & HWL Drill Rod - 4.5" Inch Rod Clamp c/w Jaws and Steadier Bearing for H & N Rods - Hydraulic Mud Mixer with Safety Shielding - Light Weight AL Mast Rotation Guard - Spline Wrench for Locking Head to change out Drilling Subs Heli Portable Drill Rig Package Location: Canada Learn More

Make: Drill Techniques Model: Casing Lifter/Extractor Year: 2017 Location: Queensland, Australia Learn More