Search results for: 'forc ripper r poa 2007 for spare'
- Related search terms
- forc ripper r poa 2007 for sale
- poa sale 3000 brand australia
- foremost revers r poa 2008 for sale
- for ripper r poa 200 for sale
- poa up camera for sale newag me
-
Keypower 6V92TA1400 Skid Mounted Booster *Not Actual Photo of Unit* (FOR HIRE/RENT - POA) (hire-ehub3426)For HireMake: Keypower Model: 6V92TA1400 Max Inlet Pressure: 2,413 kPa / 350 PSI Max. Delivery: 660 l/sec / 1,400 CFM Max. Discharge Pressure: 5,171 / 850 PSI Compression Ratio: 2:1 (Nominal) / 3:1 (Maximum) Bore: 57 mm Stroke: 127 mm Max. Operating Angle: 15 degrees Engine: Detroit 6V92TA Diesel *Not Actual Photo of Unit* Skid Mounted Booster Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Key Power
LOCATION New South Wales, Australia
MODEL 6V92TA1400
-
2004 Cubex QXR 920 Track Mounted Surface Drill Rig ($185,000 ex GST) (sale-ehub3439)For Sale$185,000.00Make: Cubex Model: QXR 920 Year: 2004 (Rebuild 2019) Hours: 16,896 Engine: Caterpillar CAT C15 Rotary Head: Cubex @ 6,230 hours (Rebuilt May 2019) Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM Variable Jaw Rotation: 15 degrees Clamping Force: 288 kN Carousel Capacity: 6 Rods Max. Rod Size: 5" Inch Min. Rod Size: 3.25 " Inch Rod Length: 6 m / 20 ft Onboard Air Compressor: Sullair + Spares Included Track Mounted Surface Drill Rig Location: Western Australia Learn MoreMachine hours 16,896
KILOMETERS N/A YEAR 2004
BRAND Cubex
LOCATION Western Australia
MODEL QXR 920
-
FMC L1122 Horizontal Triplex Piston Pumps (POA) (sale-ehub3435)For Sale$0.00Make: FMC Model: L1122 Stroke Length: 2.75" Inch Piston Diameter: 2.75" Inch Frame Load Rating: 6,000 lbs Internal Gear Ratio: 3.6:1 Intermittent Duty Speed Rating: 1,275 RPM Continuous Duty Speed Rating: 900 RPM Standard Suction Size: 2.50" Inch NPT Standard Discharge Size: 1.25" Inch NPT Number of Pistons: 3 Horizontal Triplex Piston Pump Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND FMC
LOCATION New South Wales, Australia
MODEL L1122
-
Jacques 20x12 Two Jaw Opening 8 Tonne Jaw Crusher & Baxter 30x6 Jaw Opening Granulator (POA) (sale-ehub3432)For Sale$0.00Jaw Crusher Make: Jacques Bin Capacity: 8 Tonne - 20x12 Two Jaw Opening - Vibrating Feed Bin - Discharge Conveyor - All Electric Run off 100 kVA Generator - Wired Ready to Start Condition: Well Maintained Granulator Make: Baxter - 30x6 Jaw Opening - Discharge Conveyor - All Electric Run off 100 kVA Generator Condition: Very Well Maintained Included Items; - Conveyor - Grizzly Screen - 7 Metre x 300 mm Conveyor Belt Location: Victoria, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Jacques / Baxter
LOCATION Victoria, Australia
MODEL 20x12 Two Jaw Opening / 30x6 Jaw Opening
-
Various Size, Shank, Head & Insert Halco & Karbo Drill Bits (POA) (sale-ehub3430)For Sale$0.0074x Halco Mach 44 4 1/2" Inch Convex Domed Condition: New / Used (Rust) 33x Halco Mach 44 4 1/4" Inch Convex Domed Condition: New / Used (Rust) 1x Halco Mach 44 4 1/2" Inch Concave Domed Condition: New 3x Halco Mach 44 4 1/8" Inch Convex Domed Condition: New 34x Halco Mach 303 3 1/2" Inch Convex Ballistic Condition: New 3x Karbo 4 1/2" Inch Convex Condition: New 4x Karbo 4 1/2" Inch Convex Condition: 3x New / 1x Used Various Size, Shank, Head & Insert Drill Bits Location: Canada Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Canada
MODEL Halco Mach 44/303 & Karbo
-
Custom 600 RRD Track Mounted Drill Rig (POA) (sale-ehub3428)For Sale$0.00Make: Custom Model: 600 RRD Motor: 40 HP TEFC Pulling Capacity: 24,000 lbs Lifting Capacity: 24,000 lbs Down Thrust Capacity: 12,500 lbs Rotational Torque: 6,500 ft/lbs Load Sensing Power Limiting Pump: 45 GPM @ 1,700 PSI Load Sensing Diesel Pump: 15 GPM @ 3,500 PSI Fast Feed: 14.79 GPM @ 2,500 PSI Slow Feed: 6.2 GPM @ 2,500 PSI Traction Hydraulic Motor: 14 HP each at 4,000 MASL (Using Diesel Drive) Max. Drilling Air Pressure: 400 PSI Feed Cylinders Combined Bore: 9.8 sq inch Features; - Lubricator - Water Pump - Robust Mine Proven Construction - High Torque Rotation Head - Reversable Heavy Duty Mast - Efficient Electric/Hydraulic Drive - Fully Hydraulic Operation - Compact Size - Fully Variable Rotation Speed (0-24 RPM) Hydraulically Operated Crawlers - Remotely Operated Hydraulic Console for flexibility - Sting Cylinder - Dual Heavy Duty Feed System - 90 Degree Tilt Out Rotation Head - Longitudinal Shift - Side Shift - NEMA 4 - Air Motors for travelling Track Mounted Drill Rig Location: Canada Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Home Made
LOCATION Canada
MODEL 600 RRD
-
2003 SD 100 Track Mounted Drill Rig ($250,000 ex GST) (sale-ehub3425)For Sale$250,000.00Make: SD Model: 100 Year: 2003 Hours: 22,738 (Overall approx.) Engine Hours: 10,793 (New Hour Metre with Current Hours since engine change - 1,977) Onboard Air Capacity: 1,150 CFM / 500 PSI Air Compressor Hours: 12,768 Rotary Head Hours: 2,054 (Since Change Out) Hole Inclination Range: 90-50 degrees Rod String: 4 Met / 6 m Depth Capacity: 60 m Overall Width: 2.95 m - Spare Engine requires rebuild and spares to go with the drill Features - Polyurethane Cyclone - Cone Sample Splitter - Dual Breakout System - Dust Suppression - Carousel - Rod Cage - Overhead Protection - Fire Suppression Track Mounted Drill Rig Location: Western Australia Learn MoreMachine hours 22,738
KILOMETERS N/A YEAR 2003
BRAND Home Made
LOCATION Western Australia
MODEL SD 100
-
2022 Atlas Copco X-Air 1,100 CFM / 380 PSI Portable Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3425)For HireMake: Atlas Copco Model: X-Air Year: 2022 Hours: 200 1,100 CFM 380 PSI Portable Air Compressor Location: New South Wales, Australia Learn MoreMachine hours 200
KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION New South Wales, Australia
MODEL X-Air
-
2019 Atlas Copco DrillAir XRYS 1260 CD7 1,260 CFM / 550 PSI Skid Mounted Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3424)For HireMake: Atlas Copco Model: DrillAir XRYS 1260 CD7 Year: 2019 Hours: 2,000 1,260 CFM 550 PSI Skid Mounted Air Compressor Location: New South Wales, Australia Learn MoreMachine hours 2,000
KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION New South Wales, Australia
MODEL DrillAir XRYS 1260 CD7
-
20 Tonne Payload Remote Control Track Mounted Carrier (FOR HIRE/RENT - POA) (hire-ehub3420)For HireTray Length: 12 m (Not Including Power Pack) Width: 3.2 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL N/A
-
20 Tonne Payload Remote Control Track Mounted Carrier (FOR HIRE/RENT - POA) (hire-ehub3419)For HireTray Length: 10 m (Not Including Power Pack) Width: 2.5 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL N/A
-
14x Lengths of 6 Metre 8" Inch OD 6 5/8" Inch REG Thread Drill Pipe / Rods (POA) (sale-ehub3414)For Sale$0.008" Inch OD 6 5/8" Inch REG Thread Length: 6 Metres Quantity: 14x Lengths Drill Pipe / Rods Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL 8" Inch OD / 6 5/8" Inch REG Thread
-
2007 Dieci 70.10 178 Samson Telehandler ($40,000 ex GST) (sale-ehub3406)For Sale$40,000.00Make: Dieci Model: 70.10 178 Samson Year: 2007 Performance: 94 kW Curb Weight: 12,100 kg Max Weight: 12,900 kg Max Front Axle Load: 6,200 kg Max Rear Axle Load: 8,000 kg - FOPS - ROPS Telehandler Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2007
BRAND Dieci
LOCATION Western Australia
MODEL 70.10 178
-
DB 2/3/4/5/6 Shaft Screening Buckets (POA) (sale-ehub3390)For Sale$0.00Make: DB 2-Shaft Screening Buckets BS 04/2 Capacity: 0.05 m3 Screening Area: 300 x 400 mm Weight: 140 kg BS 06/2 Capacity: 0.07 m3 Screening Area: 300 x 560 mm Weight: 175 kg BS 08/2 Capacity: 0.09 m3 Screening Area: 300 x 760 mm Weight: 205 kg BS 10/2 Capacity: 0.12 m3 Screening Area: 300 x 960 mm Weight: 240 kg 3-Shaft Screening Buckets BS 06/3 Capacity: 0.12 m3 Screening Area: 430 x 560 mm Weight: 240 kg BS 08/3 Capacity: 0.17 m3 Screening Area: 430 x 760 mm Weight: 290 kg BS 10/3 Capacity: 0.22 m3 Screening Area: 430 x 960 mm Weight: 360 kg BS 12/3 Capacity: 0.25 m3 Screening Area: 430 x 1,160 mm Weight: 405 kg BS 14/3 Capacity: 0.30 m3 Screening Area: 430 x 1,360 mm Weight: 450 kg BS 16/3 Capacity: 0.34 m3 Screening Area: 430 x 1,560 mm Weight: 510 kg 4-Shaft Screening Buckets BS 10/4 Capacity: 0.35 m3 Screening Area: 615 x 960 mm Weight: 560 kg BS 12/4 Capacity: 0.40 m3 Screening Area: 615 x 1,160 mm Weight: 600 kg BS 14/4 Capacity: 0.45 m3 Screening Area: 615 x 1,360 mm Weight: 660 kg BS 16/4 Capacity: 0.50 m3 Screening Area: 615 x 1,560 mm Weight: 720 kg 5-Shaft Screening Buckets BS 12/5 BS 14/5 BS 16/5 6-Shaft Screening Buckets BS 14/6 BS 16/6 Screening Bucket Location: Slovakia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND DB
LOCATION Slovakia
MODEL See Description
-
2020 Worldpoly Poly Force 500 Track Mounted Welding Machine ($187,000 ex GST) (sale-ehub3366)For Sale$187,000.00Make: Worldpoly Model: Poly Force 500 Year: 2020 Hours: 148 #WP500 Voltage V/P/Hz: 415/3/50 Electric Power: 9 kW Net Weight: 3,300 kg Track Mounted Welding Machine Location: Queensland, Australia Learn MoreMachine hours 148
KILOMETERS N/A YEAR 2020
BRAND Worldpoly
LOCATION Queensland, Australia
MODEL Poly Force 500
-
6x Sandvik DR560/80 Track Mounted Contour DTH Drill Rigs (FOR HIRE/RENT - POA) (hire-ehub3356)For HireMake: Sandvik Model: DR560/80 Hours: Various Max Feed Rate: 1.3 m/s (257 ft/min) Max Hoisting @ 2,100 RPM: 47 kN (10,600 lbf) Max Pulldown @ 2,100 RPM: 47 kN Top Drive Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM (Variable) Carousel Standard Capacity: 6 Rods (5 Rods for OD 140 mm (5.5" inch) Max Rod Size: 140 mm / 5.5" inch Min Rod Size: 89 mm / 3.5" inch Rod Length: 6.1 m / 20 ft Min Hammer Size: 102 mm / 4" inch Carousel Hole Depth: 42.6 m / 140 ft Max Hole Size: 216 mm / 8.5" inch Min Hole Size: 115 mm / 4.5" inch + More information can be provided Track Mounted Contour DTH Drill Rig Location: Western Australia Learn MoreMachine hours Various
KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Western Australia
MODEL DR560/80
-
2015 Rebuilt Dino 250 Track Mounted Drill Rig + Drill Trailer Workshop (POA) (sale-ehub3352)For Sale$0.00Model: Dino 250 Year: 2015 (Rebuilt) Hours: 7,119 Engine: Caterpillar CAT 3412 (Rebuilt) Includes; - Complete set of Drill Rods (200 Metres) - Drill Schematics and Parts List - Complete Service and Works History - All Serial # for Onboard Assets - Onboard Dry Element Dust Suppression Unit - Auto Fire Suppression - Hand Free AUSTEX Break Outs - Onboard Rod Handler - Onboard Rod Storage (150 Metres) - Haul Winch - Wireline Winch (350 Metres) - Remote Wireless Tramming Controls - New Metzke Rotating Splitter - Funk Box Drive - Danfoss and Rexroth Hydraulic Pumps Air Compressor Make: Sullair 900 CFM / 350 PSI - Refurbished Booster Make: Detroit Model: 6V92 Hours: 0 - Rebuilt Track Mounted Drill Rig Location: Western Australia Learn MoreMachine hours 7,119
KILOMETERS N/A YEAR 2015
BRAND N/A
LOCATION Western Australia
MODEL Dino 250
-
NW500 126HP Heli / Man Portable Drill Rig + Package (POA) (sale-ehub3327)For Sale$0.00Drill Rig Make: NW Model: 500 - Heli / Man Portable 126 HP Included; - Hydraulic Control Panel - Hydraulic Reservoir c/w Oil to Water Heat Exchanger - 3x Kubota Turbo Charged Diesel Engines @ 42 HP - Light Weight 39 GPM Down Hole Pump - 220 Litre Fuel Tank and AL Stand Feed Frame Complete - Wireline Winch with 750 m 3/16" Inch Wireline Installed - Top Drive Drill Head with Adapter Sub for HWL Drill Rod - Two Rotation Motors for NWL & HWL Drill Rod - 4.5" Inch Rod Clamp c/w Jaws and Steadier Bearing for H & N Rods - Hydraulic Mud Mixer with Safety Shielding - Light Weight AL Mast Rotation Guard - Spline Wrench for Locking Head to change out Drilling Subs Heli Portable Drill Rig Package Location: Canada Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND NW
LOCATION Canada
MODEL 500
-
2017 Drilling Techniques Casing Lifter/Extractor (POA) (sale-ehub3321)For Sale$0.00Make: Drill Techniques Model: Casing Lifter/Extractor Year: 2017 Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2017
BRAND Drilling Techniques
LOCATION Queensland, Australia
MODEL Casing Lifter/Extractor
-
Various Hose Restraints, Cable Stockings, Safety Shackles & Cambuckles / Hose Straps (POA) (sale-ehub3284)For Sale$0.00*Each Sold Separately - Not as a Package* Two-Eye Hose Restraint - Wire: Galvanised - Ferrules: Aluminium - Thimbles: Stainless Steel - Leg Protection: Sprial Guards (Colour Coded) Galvanised Sizes - 6-14 mm to 260-300 mm Stainless Steel 316 Sizes - 6-14 mm to 260-300 mm Four-Eye Hose Restraint Galvanised Sizes: 0-1.0 m to >19.5-20.0 m Stainless Steel 316 Sizes: 0-1.0 m to >19.5-20.0 m Single Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Offset Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Twin Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Open Ended Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Lace-Up Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Safety Shackles Sizes: 0.75 t - 3.2 t Cambuckles / Hose Straps 25 mm Black Polyester Webbing (Plain) Sizes: 400 - 1,500 mm 25 mm FRAS Woven Webbing Sizes: 400 - 1,500 mm 25 mm FRAS Polyester Webbing (Jacquard) Sizes: 400 - 1,500 mm Various Sized Hose Restraints Cable Stocking Safety Shackles Cambuckles Hose Straps Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL See Description for Sizes
Filter