Search results for: 'hours for size new hose pennsylvania'

Make: Schramm Model: Typhoon Hours: 5,294 Engine: John Deere 4045DF150 Diesel Skid Mounted Booster Location: Western Australia Learn More

Package Includes; - 1x New Chrome Hex Barrel - 1x Used (50%) Chrome Hex Barrel - 2x New Chrome Tool Ends Barrels - 2x Used (85%) Standard Barrels - 3x Used (50%) Standard Barrels Core Barrels Location: Victoria, Australia Learn More

Make: Bauer Model: BC40 Year: 2022 Hours: 0 - Warranty for 1 Year Track Mounted Piling Drill Rig Location: China Learn More

Make: Bauer Model: BG26 Year: 2018 Hours: 8,000 Track Mounted Piling Drill Rig Location: China Learn More

Make / Model: Atlas Copco Size: Unknown Condition: Unknown Air End Location: Western Australia Learn More

Rig Make: UDR Model: 650 Year: 2007 - Fully Rebuilt June 2021 - Complete Service on Mercedes Truck before being parked - Complete Rewire & Control Panel for Sullair Compressor - Invoices and Documentation can be provided Includes; - 2006 Sullair 1,150 CFM / 350 PSI & 900 CFM / 500 PSI Air Compressor (Rebuilt & Installed Jan 2019) - 200x Metres of 4" Inch Remet Drill Rods (with Inner Tubes & Saver Subs) 80% New - 50x Metres of 4" Inch Remet Drill Rods + 3 1/2" Inch Gear (Blow Up Cap, Remet Tube Tester & 4" Inch Remet Box to 3 1/2" Inch Remet Pin Saver Subs) 100% New Rig Truck Make: Mercedes Benz Model: Actros 3244 Year: 2006 KM's: 52,228 Type: 8x4 Sea Container 2 - 20ft Powered - Cone Splitter - Set-up for 3 1/2" Inch Rod Handler Gear - Cage with Running Gear - 3x New Head Tubes - 3x New 4" Inch Rod Spanners - Spare Top Swivel - High Pressure Air Hoses 1 1/2" Inch - 2" Inch (some fully socked and variety of lengths) - Spare Wear Bend - 5x New Wear Blocks - Hydraulic Foot Clamps - Set - Spare Hose Cradle - Diamond Rod Cage - Extra UDR Consumables & Parts Sea Container 3 - 20ft - UDR Hammers and Bits - 4x 5" Inch HF 127 mm Bit - Extras - Bits/Subs/Tubes/Head Tubes - 4x RE542-RE543 Bit 127 mm 5" Inch HF - 2x New 543 Sandvik Hammers - 2x 543 Sandvik Hammers @ 60% - PR120 Hammer - 5x 111 mm 2-4.5" Inch New Remet Aircore Bits - 4x 111 mm 2-4.5" Inch Used Remet Aircore Bits - 5x Metzki Bits @ 50% - SR170 Hammer & 4 1/8" Inch TC Bit, Shroud & Inner Tube - 6" Inch Conventional Hammer with Bit Pallets Quantity: 4 - Spares Truck Mounted Drill Rig Package Location: Western Australia Learn More

Make: Allight Model: Nightshifter 6000 Year: 2008 Hours: 17,900 Light Tower Location: Western Australia Learn More

Make: Everdigm Model: T500 Year: 2021 Hours: 6,575 Weight: 14,800 kg Track Mounted Drill Rig Location: Thailand Learn More

Make: Everdigm Model: ECD50E Year: 2011 Hours: 19 (New Engine) Weight: 14,100 kg Track Mounted Drill Rig Location: Thailand Learn More

Make: Everdigm Model: ECD40E Year: 2012 Hours: 9,577 Track Mounted Drill Rig Location: Thailand Learn More

Make: Mobile Drill Model: B80 Year: 1980 Head Stroke: Approx. 4.5 m long Dump Stroke: Approx. 2 m long Mast Length: 10 m Mast was on a working rig that has been dismantled for new mast and rig Mast Location: Victoria, Australia Learn More

Make / Model: Solar Generators - Full Solar Data Logging - Full Monthly Data Logging for Carbon Offsets Peak Power: 6 kW Continuous: 2.4 kW Battery Storage: 12 kWh Solar Power: 2,520 W Weight: 750 kg appox. Pricing: 1-7 days $120.00 per day ex GST 8-30 days $105.00 per day ex GST Trailer Location: New South Wales, Australia Learn More

Make: Newage Stamford Model: SC634B Year: 1999 Hours: 371 Engine: Detroit 12V149 Diesel Quad Turbo + Twin Super Charged @ 800 HP - Control Cabinet - 4x Bolt On, Fold Up and Down Steel Walk Platforms for Side Access - 760 kVA / 1057 AMPS / 415 Volt - Load Tested 12 months ago and stored since - unused - Video of load test available on request - Batteries Included - Battery Holder / Stand - 1000 Litre Fuel Tank Available (Not original, but easily plumbed by competent person) - Fuel Tank Stand - Muffler and Engine Pipes Included Skid Mounted Generator Location: Victoria, Australia Learn More

Make: Narrow Series Model: KWL350RC DTH Fitted with Twin Saeur Danfoss OMTW 315 Hydraulic Orbital Motors Condition: New (Spare Part) Drill Rig Top Head Rotation Drive Unit Location: Western Australia Learn More

Make / Model: Jules Weber Hours: 3,757 - Bowen Power Swivel / Top Drive - Bourne Draw Works with 18,000 lbs single line pull - 6 Line Travelling Block for a maximum 108,000 lbs hoist - Has drilled down to 900 m a number of times Conventional Wheel Mounted Drill Rig Location: Victoria, Australia Learn More

Make: FMC Model: L1622HV Triplex Pressure: Maximum 1500 PSI - Minimum 100 PSI Fluids Used: Various grades of muds & water - This pump is designed to pump fluids using the Triplex Pump to pump down a well head using pressures of up to 1500 PSI. - The pump skid weighs only 2450 kg (wet) and only covers an area of 2.4 m x 1.92 m making it very easy to move into restricted areas due to its compact abilities. - Because of its limited size it makes it very easy to transport to various locations. - The pump skid is compact yet practical to access any part of the pumps. Skid Mounted Bean Mud Pump Location: Queensland, Australia Learn More

Make: SICK Model: LMS151-10100S01 Year: 2022 Brand New In Original Box Laser Location: Queensland, Australia Learn More

Make / Model: CE100 Year: 2013 (Rebuilt completed in 2022) Hours: 551 - Fully Re-Engineered - NDT Testing Completed - CT14 Hydraulic Operating System - NQ, HQ, PQ Drilling Capabilities - Up to date Safety Stop Systems - Engineered and compliant hand rail and walkway system and access ladders - Full lighting for N/S operations - Certified FOPS on driller platform - Running new Danfos Primary Hydraulic Pump at >3500 PSI direct from John Deere 127 HP - 165 HP engine - 5.7 Tonne Main Winch with certified 16mm Winch Rope - A new AMC Main Water Pump <1000 PSI with a PRV Valve Set @750 PSI - New Stryker 45ltr Certified Fire Suppression system installed - A UDR Rod Spinner has been engineered into mast structure for hands free operation of tripping rods - A hydraulic operated Breakout Spanner allows for breakout of rod joins or subs - Tungsten inserts interchangeable on Breakout Spanner - UDR Foot Clamp assembly added for ease of maintenance and clamping of rod string Diamond Core Track Mounted Drill Rig Location: Western Australia Learn More

Make: General Breaker Model: GB7TL/GB8ATL Weight: 18-22 Tonne Titan Headplate: 80 mm pins, 320 mm ears and 470 mm centers - Industry standard breaker with Australian dealer and parts support - Comes with toolbox containing gas charge kit, tools and spares Full in house rebuild with the following new parts; - Tie Rods - Tool Retainers - Upper and Lower Bushes - Full Seal Kit - Charge Valve - Wedge Chisel - All Hardware and Fasteners Flame Resistant Hydraulic Hoses Piston and Bore in Perfect Condition Transport and Storage Stand Supplied Operators Manual in PDF Full 12 month Workshop warranty supplied Excavator Hammer Rock Breaker Location: Australia Learn More

Make: Ingersoll Rand Model: DML HP1250 Hours: 3,117 Track Mounted Drill Rig Location: New South Wales, Australia Learn More