Search results for: '마케팅자동화다낭건마㊣【H】【O】【N】【G】【B】【O】【8】【2】【8】【8】㊣필리핀유흥디시라이브토토 사이트 제작라마다인증성수역룸싸롱'
-
2x Mud Tanks (POA) (sale-ehub4548)For Sale$0.00Quantity: 2 Mud Tanks Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL N/A
-
Desco 6500 SA Track Mounted Multipurpose Drill Rig + Hanjin 7CR Track Mounted Carrier + 2012 Desco DS600 Track Mounted Support Carrier Package (POA) (sale-ehub4547)For Sale$0.00Drill Rig Make: Desco Model: 6500 SA Hours: 2,145 Engine: Hyundai @ 270 HP (Engine Number: D6AZB211751) - Top Drive with Drill Start Top and Bottom Swivels - Blow Up / Blow Down - Linus 4 Remote Control Tramming - Rod Presenter - New Winch Drum and Rope - Wireline - Rotation Cage - 25K Water Swivel and Lower Diamond Spindle - Onboard Cyclone - RC Spanner - Hydraulic Breakout - 4" Inch and 4 1/2" Inch RC Jaws and Rod Breaker - N, H and P Diamond Jaws - Emergency Stops - Freshly Painted - Fully Serviced + Ready For Work Track Carrier Make: Hanjin Model: 7CR Engine: Laidong 4LAW22 (Brand New - Just Fitted) - Linus 4 Remote Control Wireless Tramming - Walkways - Fresh Paint - Shut Down System - Onboard HR2 Air Compressor (Powered by Caterpillar 3406B Engine @ 1,086 hours) - In Chassis Rebuild 200 Hours Ago - Fully Serviced + Ready To Go Support Track Carrier Make: Desco Model: DS600 Year: 2012 Hours: 4,108 Engine: D4DAC497407 - Linus 4 Remote Control Wireless Tramming - 6 Metre Tray - Fresh Paint - Serviced + Ready To Go Multipurpose Track Mounted Drill Rig Package Location: Southeast Asia Learn MoreMachine hours See Description
KILOMETERS N/A YEAR N/A BRAND Desco
LOCATION Southeast Asia
MODEL 6500 SA
-
Full Solar Lunch Room / Bedroom/Crib / Office Dual Axle Caravan ($65,000 ex GST) (sale-ehub4540)For Sale$65,000.00- Lunch Room - Crib / Bedroom - Office - 20kW Battery - 3 Day Battery Life Without Sun - 4kW Solar Power - Kitchenette / Sink / Pump - 200 Litre Fresh Water Tank - 200 Litre Grey Water Tank - Fridge / Freezer / Microwave / Chair & Table (for 8 people) Trailer Year: 2022 - 50 mm Ball - Electric Brakes - 7 Pin Round Small Trailer Plug - Mine Site Compliant - Towable by 3.5 Tonne Vehicle Full Solar Dual Axle Caravan Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL N/A
-
Aluminium Float Plane / Work Boat Pontoon (POA or EOI) (sale-ehub4538)For Sale$0.00- Synchro Lifting on Hydraulic Winches - Only ever been in a Freshwater Lake - 4x 2 Tonne Winch S/Steel for Lifting Synchro Platform (Hydraulic Motor Non-Operational) Dimensions; Length: 14.390 Metre Width: 8.555 Metre Center Between Pontoons: 4.650 Metre Retracting Lift Deck Width: 4.6 Metre Retracting Lift Deck Length: 8.5 Metre Inbuilt Fuel Tanks Total Capacity: 3,800 Litres Inbuilt Freshwater Tank Capacity: 20,000 Litres - Unit was fabricated to suit a float plane on a fresh water lake. Unit set up for fuel and water bunker step on step off platform decking. The unit has a unique lower raise center deck to allow plane or boat to be lifted clear of the water and Aline with main pontoon deck for step on step off. The unit has been non operational for some years and stores on hard stand in NT. The unit unbolts into 2x 14m long main pontoons with one small bolt on front forward section. Quoted price to replace is over $250,000 Aluminium Float Plane / Work Boat Pontoon Location: Northern Territory, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Northern Territory, Australia
MODEL N/A
-
50HS-C HSC Slurry Centrifugal Mud Pump ($4,850 ex GST) (sale-ehub4506)For Sale$4,850.00Model: 50HS-C Discharge Size: 50 mm (2" Inch) Inlet Size: 75 mm (3" Inch) Capacity: 70 m3/h (308 GPM) Head: 50 m (72.5 PSI) Max. Efficiency: 55% NPSH: 4~6 m Allowable Mating Max. Power: 30 KW Base Type: C Particle Size: 25 mm RPM: 2,500 - Configured with Electric Motor but can be changed to run with a Hydraulic Motor with base included HSC Slurry Centrifugal Mud Pump Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL 50HS-C
-
2018 MTU1250/SP 1,250 kVA Generator ($135,000 ex GST) (sale-ehub4482)For Sale$135,000.00Model: MTU1250/SP Year: 2018 Hours: 8,000 Engine: 18V2000G26F Voltage: 400/230 V Phases: 3F + N Prime Power: 1,250 kVA / 1,000 kW Standby Power: 1,375 kVA / 1,100 kW HZ: 50 RPM: 1,500 Generator Location: Queensland, Australia Learn MoreMachine hours 8,000
KILOMETERS N/A YEAR 2018
BRAND N/A
LOCATION Queensland, Australia
MODEL MTU1250/SP
-
2x PLT-596B 10' Foot Offshore General Purpose Chemical Tanks (POA) (sale-ehub4481)For Sale$0.00Model: PLT-596B Tank Code / Classification: UN T11 Certification Standards: DNV2.7-1 / ISO10855 External Dimensions (L x W x H): 2,991 mm x 2,438 mm x 2,591 mm Shell Thickness: 6.0 mm Max. Nominal Capacity: 8,200 Litres Max. Filling Capacity: 7,790 Litres Maximum Gross Weight: 15,000 kg Tare Weight: 3,350 kg Maximum Payload: 11,650 kg Vessel Material: 316 Litres Frame Material: SPA-H/Q355D Design Pressure: 4.0 bar Test Pressure: 6.0 bar Design Temperature (Tank): -40 °C to 50 °C Design Temperature (Frame): -40 °C to 50 °C Quantity: 2 10' Foot Offshore General Purpose Chemical Tanks Location: China Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION China
MODEL PLT-596B
-
2x CMQ Engineering Skid Mounted Filter Press (POA) (sale-ehub4480)For Sale$0.00Make: CMQ Engineering - 47 Plates: 0.007467 m3 per plate Total Solid Cake Volume per Cycle: 0.35 m3 Total Dry Weight: 16 Tonnes Transport Dimensions; Length: 12.19 m Width: 3.18 m Height: 3.54 m - 40' Foot Container Frame with ISO Container Locks - Heavy Duty Structural Steel Frame with Integrated Lifting Points Quantity: 2 (1x Lightly Used & 1x New) Skid Mounted Filter Press Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL Filter Press
-
2007 Atlas Copco RD20 Drill Rig Mounted on Truck ($990,000 ex GST) (sale-ehub4468)For Sale$990,000.00Make: Atlas Copco Model: RD20 Year: 2007 Hours: 8,605 - Foremost Rod Handler - Complete with a 1,400 Metres of 2 7/8" Inch IF Rod String - Set of Rod Trestles designed to go along with the Foremost Rod Handler Truck Mounted Drill Rig Location: New South Wales, Australia Learn MoreMachine hours 8,605
KILOMETERS N/A YEAR 2007
BRAND Atlas Copco
LOCATION New South Wales, Australia
MODEL RD20
-
1991 Kenworth T900 Prime Mover Truck ($145,000 ex GST) (sale-ehub4462)For Sale$145,000.00Make: Kenworth Model: T900 Year: 1991 KM's: 340,000 Engine: 2014 Caterpillar CAT 9NZ C15 @ 550 HP Transmission: 18 Speed Road Ranger - 36" Inch Bunk - 130T Rated - 3 1/2" Inch Ball Race Turn Table - Water Tanks Under Bunk - Air CTI System to Drive - 4.56 Diff Ratio - 6 Rod Suspension - 80% Drive Tyres - New Steer Tyres - Massive Amount of Spares including original Caterpillar CAT 3406E Motor (All Brand New Parts but Nipped up on #1 Cylinder) (Kept as spare motor) Prime Mover Truck Location: Northern Territory, Australia Learn MoreMachine hours N/A KILOMETERS 340,000
YEAR 1991
BRAND Kenworth
LOCATION Northern Territory, Australia
MODEL T900
-
2024 Forward RC3 Track Mounted Water Well Drill Rig + 2009 Mudslayer 500 Mounted on Trailer Package ($225,000 ex GST) (sale-ehub4453)For Sale$225,000.00Drill Rig Make: Forward Model: RC3 Year: 2024 Hours: 128 Engine: Cummins 6BTA Drilling Capacity: 380 m Drilling Diameter: 10" Inches Drill Head Rotation: 0-120 RPM / 5,600 Nm Pull Back Force: 120 kN Hoist Capacity: 20 kN Feed Stroke: 3,400 mm Mast Height: 6,400 mm Mud Pump: 450 Litres per minute at 1,000 PSI Crawl Speed: 3 km/h Weight: 1,180 kg Dimensions: 6,400 x 2,250 x 400 - Remote Tramming - Jack Legs - Mast Tilt - Mast Pump Includes; - 150 Metres of Rods & Different Sized Bits - Settling Tank - Hoses Modifications; - P.R.D Dual Breakout 210 mm Diameter (Can be swung out of way to allow larger install) - Larger Hydraulic Pump Installed Mudslayer Make: Mudslayer Model: 500 Year: 2009 Hours: 2,300 Engine: John Deere 4045 - New Screens on Sharker Deck - New Sand Guzzler - Registered Track Mounted Water Well Drill Rig Trailer Mounted Mudslayer Package Location: Western Australia Learn MoreMachine hours 128
KILOMETERS N/A YEAR N/A BRAND Forward
LOCATION Western Australia
MODEL RC3
-
1978 Ideco H35 Work Over Drill Rig + Drilling Sub Base & Associated Equipment Package (Open to Offers) (sale-ehub4446)For Sale$0.00Drill Rig Make: Ideco Model: H35 Year: 1978 Engine: Detroit Diesel 8V92T Calibrated to 500 HP @ 2,100 RPM - 212,000 lbs Hook Load - 6 Lines 7/8 Deipa Drill Line - Shorty Block - Ideco 30,000 ft/lbs Rotary Table Torque - Bowen S120 8,500 ft/lbs Power Swivel Torque - GN Solids 400 bbl Mud Tank Capacity - F500 Mud Pumps with Caterpillar CAT 3412 Engines - Racking Board can hold 160 Double Stands NC38 Drill Pipe + 8" Inch Collar Fingers - Unit has drilled 10 wells since a major refurbishment + Semi Trailers, Dollies, Mud Pumps, Mud Cleaning Units, Poor Boy Degassers, Power / Rotary Swivels, Koomey Units, Parts & Accessories, Storage / Workshop / Office / Spares Containers, Air Compressors, Drill Pipe, BOP Testing Unit, etc. *More information / photos available upon request* Work Over Drill Rig Drilling Sub Base Associated Equipment Package Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 1978
BRAND Ideco
LOCATION Queensland, Australia
MODEL H35
-
New/Unused Rod Handler to suit Massenza Drill Rig ($40,000 ex GST) (sale-ehub4445)For Sale$40,000.00Make/Model: Massenza Year: 2024 Condition: New/Unused - Built to Pick Up 4 1/2" 6 Metre Drill Pipe - Has been taken off a Massenza MI 40 Drill Rig - Never drilled a metre - Designed to pick up from behind the rig Rod Handler Location: South Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION South Australia
MODEL Massenza
-
2x Komatsu D375A Track Mounted Crawler Bulldozers (POA) (sale-ehub4441)For Sale$0.00Make: Komatsu Model: D375A Quantity: 2 - New / Unused Track Mounted Crawler Bulldozer Location: Japan Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Komatsu
LOCATION Japan
MODEL D375A
-
2011 Atlas Copco Mustang F-13 Track Mounted Multipurpose Drill Rig (POA) (sale-ehub4439)For Sale$0.00Make: Atlas Copco Model: Mustang F-13 Year: 2011 Hours: 5,302 Serial Number: CRG112662111-1 Accessories: Surplus Rods & Spare Parts Capacity; HQ: 800 Metres PQ: 350 Metres Open Hole: 650 Metres (Depends on Type of Rods used) - Upgraded from Original Spec (Completed by Atlas Copco) - Hydraulic System (Bigger Pumps) & Gear Box (Rotation Unit) + Bigger Cooling Pack to Hydraulic - Two Speed Main Winch @ 8 Tonne Pullback - Head @ 13 Tonne Pullback - 140 Trido Flush Pump Track Mounted Multipurpose Drill Rig Location: Tasmania, Australia Learn MoreMachine hours 5,302
KILOMETERS N/A YEAR 2011
BRAND Atlas Copco
LOCATION Tasmania, Australia
MODEL Mustang F-13
-
BOP Equipment Package (POA) (sale-ehub4433)For Sale$0.00- BOP Hoses - 2 3/8" Inch Inside BOP - 2 7/8" Inch Inside BOP - Choke Manifold - 2 3/8" Inch Kelly Clock - 2 7/8" Inch Kelly Clock - 2 3/8" Inch IBOP - 2 7/8" Inch IBOP - Koomey - Poor Boy Degasser - Test Stump - 7 1/16" Inch 3,000 PSI BOP Pipe Rams - 7 1/16" Inch BOP Blind Rams - Pipe Ram Blocks for 7 1/16" Inch BOP Variable also 3 1/2" Inch & 4 1/2" Inch Blind Ram Blocks for 7 1/16" Inch BOP - 7 1/16" Inch BOP Annular Preventer - 3 Station Sized to run BOP Stack above BOP Actuator - 1x Set of Hydraulic Hoses to connect Actuator with BOP Stack - 2 1/16" Inch 3,000 PSI Manual Operated HCR Valve - 3x 2 1/16" Inch 3,000 PSI Manual Operated Shut Off Valve - 7 1/16" Inch 3,000 PSI with 2 1/16" Inch Side Outlets Drilling Spool - 2 Channel 3,000 PSI 2 1/16" Inch Choke Manifold - 2x 6 Metre + 3,000 PSI 2 1/16" Inch Connect to HCR and Choke Flexible Choke Line - 2x BOP Starter Flange to suit Lower Drilling Spool to make up onto PWT - 3x Sets of all seal rings needed for coupling up the BOP Stack BOP Equipment Package Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL N/A
-
RAB/Air Core Drill Rig Mounted on 2007 Hino GT1J Series 2 Truck + 2008 Hino GT 8J Tray Top Water & Fuel Support Truck (POA) (sale-ehub4429)For Sale$0.00Drill Rig Hours: 457 Engine: Perkins 4.236 Air Compressor: Sullair 600 CFM / 200 PSI Air Compressor Engine: Caterpillar CAT 3208 @ 250 HP Compressor Hours: 29 Drilling Method: Air Core & RAB Drilling Depth: 120 m Drilling Angles: 55 to 90 degrees Drill Rod Specifications: 3" Inch Air Core Additional Equipment; - Dump Mast - 4 Metre Head Travel - Auto Rod Spinners - Automatic Brake Outs - Onboard Cyclone - Water Injection Dust Suppression Truck Make: Hino Model: GT1J Series 2 Year: 2007 KM's: 13,264 GVM: 13,000 kg GCM: 21,000 kg Support Truck Make: Hino Model: GT 8J (GT 1322) Year: 2008 KM's: 83,514 GVM: 13,000 kg GCM: 21,000 kg Water Capacity: 2,500 Litres Fuel Capacity: 4,500 Litres Truck Mounted Drill Rig Tray Top Water & Fuel Support Truck Location: Western Australia Learn MoreMachine hours 457
KILOMETERS 13,264
YEAR 2007
BRAND Hino
LOCATION Western Australia
MODEL GT1J Series 2
-
VB10 Track Mounted Dual Rotary Drill Rig ($409,500 ex GST) (sale-ehub4427)For Sale$409,500.00Model: VB10 Engine: Deutz TCD2012L04 4 Cylinder Working Pressure: Max. 350 Bar Torque (Inside Rods): 3,700 / 7,400 Speed: 120 / 60 RPM Torque (Outside Rods): 12,000 / 24,000 Speed: 54 / 27 RPM Max. Breaking Torque: 46,000 Nm Drill Pole; Pole Profile: 300 x 200 x 8 mm Pole Height: 7,190 mm Stroke: 3,600 mm Hook Load / Pulling Force (Chain): 120 kN / 245 kN Max. Contact Pressure (Chain): 60 kN Travelling Speed: Up to 40 m/min Max. Rod Length: 2 m Track Mounted Dual Rotary Drill Rig Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL VB10
-
2022 VersaDrill KmN1.4sm Track Mounted Core Drill Rig (POA) (sale-ehub4426)For Sale$0.00Make: VersaDrill Model: KmN1.4sm Year: 2022 Hours: 3,500 Depth Capacity: N Size @ 2,294 m (7,526 ft) Rotary Head Ratio: 1:2,33 Speed: 0 to 1,250 RPM Spindle Interior Dimension: 124 mm (4.9" Inches) Hydraulic Motor: 160 CC Variable Track Mounted Core Drill Rig Location: United States of America Learn MoreMachine hours 3,500
KILOMETERS N/A YEAR N/A BRAND Versadrill
LOCATION United States of America
MODEL KmN1.4sm
-
2x Tsurumi 80SFQ211 Submersible Pumps (POA) (sale-ehub4425)For Sale$0.00Make: Tsurumi Model: 80SFQ211 Discharge: 80 mm Frequency: 50 Hz Total Head Max.: 44 m Capacity Max.: 1.94 m3/min Phase: 3 Induction Motor Output: 11 kW Voltage: 380/400/415 Current: 22.5/21.0/21.0 - Sea Water Quality - Installed & Commissioned (Never Used) Quantity: 2 Submersible Pumps Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL 80SFQ211
Filter