Search results for: 'brand grader high for side'

Set Ascending Direction

82 items

per page
Did you mean
brand grader high for sale
brand grader hire for side
Related search terms
forest ripper r poa 200 for sale
brand greas hire for sale
high to enabled 100 hz and adaptive sync
high to enabl 100 hz and adaptive sonic
high to enabled 100 hz and adaptive sets
  1. 2021 Caterpillar CAT 16 GC Motor Grader (POA) (sale-ehub4220)
    For Sale
    $0.00
    Make: Caterpillar Model: 16 GC Year: 2021 Hours: 5,700 - Sold Offshore Motor Grader Location: United States of America Learn More
    Machine hours

    5,700

    KILOMETERS N/A
    YEAR

    2021

    BRAND

    Caterpillar

    LOCATION

    United States of America

    MODEL

    16 GC

  2. HD-500 Skid Mounted Triplex Pump Unit ($USD385,000) (sale-ehub4218)
    For Sale
    $0.00
    Model: HD-500 Engine: Detroit 8V-92TA / 450HP @ 2,100 RPM Flow Rate: Up to 7.5 BPM / 315 GPM / 1,200 LPM High Pressure: Up to 13,500 PSI Dimensions; Length: 6,058 mm Width: 2,438 mm Height: 2,591 mm Weights; Unit Weight: 11,000 kg Frame Max: 15,000 kg Stacking Mass: 194,000 kg Skid Mounted Triplex Pump Unit Location: United Arab Emirates Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    United Arab Emirates

    MODEL

    HD-500

  3. 2021 Hydco 8V92 1,800 CFM / 900 PSI Skid Mounted Booster ($90,000 ex GST) (sale-ehub4214)
    For Sale
    $90,000.00
    Make: Hydco Model: 8V92 Year: 2021 Hours: 7,370 - New Air Side at 500 hours - Pistons, Rings, Barrels, etc. all out of Hydco - New Blower fitted in December with 60 hours - New Fuel Rack and Tune Up completed - Spare PRV's 1,800 CFM 900 PSI Skid Mounted Booster Location: Northern Territory, Australia Learn More
    Machine hours

    7,370

    KILOMETERS N/A
    YEAR

    2021

    BRAND

    Hydco

    LOCATION

    Northern Territory, Australia

    MODEL

    8V92

  4. 2014 Caterpillar CAT 773G Water Truck (POA) (sale-ehub4176)
    For Sale
    $0.00
    Make: Caterpillar Model: 773G Year: 2014 Hours: 23,585 Idle Hours: 13,606 - New Tank - 3x Adjustable Rear Spray Heads - 2x Side Spray Heads - Hose Reel - Water Cannon - Top Fill Water Truck Location: United States of America Learn More
    Machine hours

    23,585

    KILOMETERS N/A
    YEAR

    2014

    BRAND

    Caterpillar

    LOCATION

    United States of America

    MODEL

    773G

  5. 1997 Custom Made GT500 Hydraulic Driven Skid Mounted Grout Mixers & Hoppers (Open to Offers) (sale-ehub4174)
    For Sale
    $0.00
    Make: Custom Made Model: GT500 Year: 1997 Dimensions; Length: 2 Metres Width: 1.5 Metres Height: 1.2 Metres Weight: 680 kg each Bowl Capacity: 500 Litres each - Mazda Power Packs or larger most suitable for these mixers - Last Used approx. 2014 - Controlled Independently - Specifically designed to mix large volumes of High Early Strength Non-Shrink Grouts very quickly - Cycle times were designed to be less than eight minutes and continuously - Indeed full truckloads of fast setting grouts were mixed and placed using these machines in less than a shift - Mixers were commonly mounted and used from the back of our truck - There are two mixers; a left hand and a right hand - When used together the controls were in the centre between the mixers - When configured like this one operator would control both machines - One machine would be dumping while the other one was mixing - Output was continuous and in less than eight minutes per batch - Mixed grout was dumped into a hopper and taken to the site needed - Forklift Channels (Center Balanced) - Machine has mixed; Proprietary Cement Grouts, Non-Shrink Grouts, Small Aggregate Concrete, etc. - Hydraulic Driven Skid Mounted Grout Mixers & Hoppers Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR

    1997

    BRAND

    Home Made

    LOCATION

    Queensland, Australia

    MODEL

    GT500

  6. Everdigm Rocky B180 API 8-5/8" Inch Reg. Pin RS Hammer with N180 Shank ($35,000 ex GST) (sale-ehub3765)
    For Sale
    $35,000.00
    Make: Everdigm Model: Rocky B180 Bit Shank: N180 Shank Connection: API 8-5/8" Inch Reg. Pin Piston Stroke: 5.75" Inch Cylinder Bore: 12.28" Inch Hole Sizes: 18" Inch ~ 26" Inch Wrench Size: A/F 14" Inch - Brand New - Bailing Subs/Break Out Plate, etc. - Hammer forklift cradle included - 19” Hammer bit included (unused) RS Hammer Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    Everdigm

    LOCATION

    Queensland, Australia

    MODEL

    Rocky B180

  7. 2017 Brevini Skid Mounted Pump (Open to Offers) (sale-ehub4138)
    For Sale
    $0.00
    Make: Brevini Year: 2017 Hours: 0 (Complete Overhaul in June 2025) Weight: 1,650 kg - All Hydraulics and Electrics have been fully re-conditioned - 55kW Electric Motor driving a hydraulic pump, which in turn drives a reciprocating high pressure water pump with a maximum output of 90L/min of water at 180 Bar pressure. - The complete pump system has been designed to run continuously and all equipment is housed within a fully enclosed cover. - As the motor drives a hydraulic pump, the high pressure water output is fully adjustable while the motor runs at a constant speed, unlike a high pressure water pump that is direct driven by a fixed speed electric motor. Additionally, because the hydraulic circuit incorporates an unloader valve, it is possible to switch the high pressure water on and off without the need to stop the motor or bypass high pressure water into a holding tank. - The hydraulics system is of robust construction containing 300L of oil and an integrated oil cooler. - The system can also be used as a 55 kW hydraulic power pack. Skid Mounted Pump Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR

    2017

    BRAND

    N/A

    LOCATION

    Queensland, Australia

    MODEL

    Brevini

  8. Foot Clamp + BQ, NQ, HQ, PQ, PWT Jaw Sets + Jaw Teeth Inserts (POA) (sale-ehub4130)
    For Sale
    $0.00
    - Complete Foot Clamp (ex Jaws) - BQ Jaw Set c/w Teeth - NQ Jaw Set c/w Teeth - HQ Jaw Set c/w Teeth - PQ Jaw Set c/w Teeth - PWT Jaw Set c/w Teeth - In Cast PQ Jaw Set - Jaw Teeth Insert Set *Brand New Location: New South Wales, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    New South Wales, Australia

    MODEL

    See Description

  9. Gardner Denver SCH2500 Hydratrack Track Mounted Blast Hole Drill Rig (POA) (sale-ehub4126)
    For Sale
    $0.00
    Make: Gardner Denver Model: SCH2500 Year: 1990 approx. Engine: Cummins 6 BTA 5.9 Serial Number: 2711468 - Includes Drill Rods and Sampling Equipment Complete Overhaul; - Hammer HPRI - New Head Injectors on Fuel Pump - Track and Final Drives - Oil Cooler Replaced with CAT Cooler and mounted on left hand side Hydratrack Track Mounted Blast Hole Drill Rig Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR

    1990

    BRAND

    Gardner Denver

    LOCATION

    Queensland, Australia

    MODEL

    SCH2500

  10. 45x 6 Metre Lengths of HWT Surepipe Casing (POA) (sale-ehub4079)
    For Sale
    $0.00
    Make: HWT Length: 6 Metre Quantity: 45 - Surepipe - Brand New Casing Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Queensland, Australia

    MODEL

    HWT Surepipe

  11. Brand New Gertec Skid Mounted Grout Unit ($107,500 ex GST) (sale-ehub4045)
    For Sale
    $107,500.00
    Make: Gertec - Brand New - Never Used Skid Mounted Grout Unit Location: Victoria, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Victoria, Australia

    MODEL

    N/A

  12. 2009 Nissan Patrol DX GU MY08 4x4 Ute ($30,000) (sale-ehub4044)
    For Sale
    $30,000.00
    Make: Nissan Model: Patrol DX GU MY08 Year: 2009 KM's: 282,381 Transmission: 5 Speed Manual Type: 4x4 - New Engine at 241,000 km's - Clutch and Flywheel - 3" Inch Exhaust - Long Range Tank - Water Tank - 2x Spare Tyres - Full Mine Spec (inc. UHF, High Vis, etc.) Ute Location: Western Australia Learn More
    Machine hours N/A KILOMETERS

    282,381

    YEAR

    2009

    BRAND

    Nissan

    LOCATION

    Western Australia

    MODEL

    Patrol DX GU MY08

  13. Doosan Air End Suitable for PA536, XHP1250 & XHP1170 Air Compressors ($48,000 ex GST) (sale-ehub4024)
    For Sale
    $48,000.00
    Make: Doosan Models (Suitable): PA536, XHP1250 & XHP1170 - Brand New - Tailored to meet specific requirements - Inclusive of Warranty Air End Location: Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    Doosan

    LOCATION

    Australia

    MODEL

    PA536, XHP1250 & XHP1170

  14. TT300 Trailerised Drill Rig + Volvo FH12 460 Truck with Atlas Copco XRV1200 Air Compressor & More Package (POA) (sale-ehub3999)
    For Sale
    $0.00
    Rig Model: TT300 Hours: 18 Engine: Deutz F6L912 / 66 kW Rated Depth Capacity: 300 m Feed Cylinder: 100 mm Barrel / 70 mm Shaft / 4 m Stroke Outrigger (Jacks): 4x Boxed Outriggers with 800 m Stroke Foam Pump: 21 Litre per min / 35 bar Foam/Water Tank: 120 Litre Axles: 2x 5 Tonne Air Braked Axles Tower: Direct on Cylinder / Triangle Shape Winch: 1 Tonne Push Down Force: 5,000 kgf @ 175 bar Pull Up Force: 13,000 kgf @ 175 bar Tilt Cylinders: 2x 80 Barrel 50 Shaft Breakout: 300 mm Stroke Cylinder Hydraulic Oil Tank Capacity: 330 Litres - Hydraulic Oil Cooler - Extended Tower to accommodate 4 m Stroke Cylinder - Spanners Included: 1x Breakout / 2x Keeper / 3x Hammer Modifications; - Hydraulically Tilt Rotary Head - Rotary changed to geared Rotary Head with Hollow Spindle (8,000 Nm Torque) - Including 2x Eaton Hydraulic Motors - Side Shift (on rotary head – opens up the tower for longer casing, etc.) Support Truck Make: Volvo Model: FH12 460 KM’s: 1,040,378 Type: 8x4 Air Compressor Make: Atlas Copco Model: XRV1200 Year: 2020 Hours: 122 Engine: Cummins Pressure: 22.7 bar / 330 PSI Engine/Motor Speed: 1,900 RPM Engine/Motor Power: 325 kW / 430 HP 1,200 CFM / 330 PSI - Included Drill Bits, Rods and Drilling Equipment Trailerised Drill Rig Support Truck Air Compressor Package Location: New Zealand Learn More
    Machine hours

    18

    KILOMETERS

    1,040,378

    YEAR

    2020

    BRAND

    N/A

    LOCATION

    New Zealand

    MODEL

    TT300

  15. 2017 Sandman Mission Magnum Sandmaster 8x10x14 Trailerised Mud Pump ($67,500 ex GST) (sale-ehub3994)
    For Sale
    $67,500.00
    Mud Pump Make: Sandman Model: Mission Magnum Sandmaster 8x10x14 Year: 2017 Engine: Cummins 6 Cylinder Diesel w/ Clutch - 8 Valve Discharge Manifold on back - 2x 8 Valve Suction Manifold on each side - Flow Meter Trailer Year: 2012 - Pindle Hitch Dimensions; Width: 7.6' Length: 16' Tyres: 245/70R17.5" Trailerised Mud Pump Location: New Zealand Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR

    2017

    BRAND

    N/A

    LOCATION

    New Zealand

    MODEL

    Mission Magnum Sandmaster 8x10x14

  16. 2010 Soilmec SM-21 Track Mounted Rotary Drill Rig (POA) (sale-ehub3978)
    For Sale
    $0.00
    Make: Soilmec Model: SM-21 Year: 2010 Hours: 132 - Brand New Engine (Under Warranty) - Rebuilt Rotation Head - New Hydraulic Track Mounted Rotary Drill Rig Location: Western Australia Learn More
    Machine hours

    132

    KILOMETERS N/A
    YEAR

    2010

    BRAND

    Soilmec

    LOCATION

    Western Australia

    MODEL

    SM-21

  17. 2007 Hydrapower Explorer 500 Drill Rig Mounted on 2005 MAN M2000 Truck (POA) (sale-ehub3938)
    For Sale
    $0.00
    Rig Make: Hydrapower Model: Explorer 500 Year: 2007 Hours: 6,700 Engine: Cummins CPAK-6BTA Turbo After Cooled 6 Cylinder (176 HP @ 2,500 RPM) Rig Hydraulics; - Sauer Danfoss proportionally controlled control valves - Sauer closed loop pump on Rotary Drive Sauer open loop pump on auxiliary functions Rotary Drive; - Hydrapower Gearbox - Steel Casing with floating hollow spindle and hydraulic head lock and swing - Two Speed, 0 - 225 RPM & 0 - 966 RPM - Low speed torque to 4150 Nm - High speed torque to 966 Nm Head Travel: 6.8 m Main Winch; -Max. Pull: 4,200 kg -Max. Line Speed: 28 m/min Wireline Winch; Max. Pull: 780 kg Max. Line Speed: 83 m/min Pulldown; - Electrically controlled with dial for speed control Pull Down Capacity: 7000 kg Pull Out Capacity: 11,500 kg Mast; - Fitted with 2.0 m mast dump for angle drilling - Standard length is 10 m, supplied with hydraulically operated breakout spanner and top pulley swivel - Supplied with hydraulic circuit with quick-connect couplings for optional breakout table - Brakeout Table with Split Type Table - Bean Pump - 5x6 Gardner Denver Mud Pump (Hydraulic Driven) Truck Make: MAN Model: M2000 Year: 2005 KM's: 75,000 - Not registered - Some gearbox problems Truck Mounted Drill Rig Location: New South Wales, Australia Learn More
    Machine hours

    6,700

    KILOMETERS

    75,000

    YEAR

    2007

    BRAND

    Hydrapower

    LOCATION

    New South Wales, Australia

    MODEL

    Explorer 500

  18. 2012 Caterpillar CAT 16M Motor Grader (POA) (sale-ehub3887)
    For Sale
    $0.00
    Make: Caterpillar Model: 16M Year: 2012 Hours: 10,192 Engine: Caterpillar CAT C13 Tyres: Michelin 23.5R25 - Cab A/C & Heater - Push Block - 16' Blade - MS Ripper - Mine Spec - EPA Tier 3 Motor Grader Location: Chile Learn More
    Machine hours

    10,192

    KILOMETERS N/A
    YEAR

    2012

    BRAND

    Caterpillar

    LOCATION

    Chile

    MODEL

    16M

  19. Water Evaporator (FOR HIRE/RENT - POA) (hire-ehub3873)
    For Hire
    Model: OIE187 Cannon Fan: 425,000 m3/hr / Dual Fiber Glass PAG Impeller Discharge Hose: 1.5" Inch & 500 PSI High Pressure Pump: 7-8 Bars Discharge Fan Power: 130 kW Pump Power: 55 kW Pump Flow: 150 m3/hr Evaporation Rate: 24.98 lps @ 60% Daily Operating Time: 10 Hours + - SS Ring with Nozzles - Spiral Nozzle SS316 - Fan Safeguard Mesh - Control Panel Generator Make: Shanghai Stamford Brushless Engine: Dongfeng Cummins Control System: HGM6110 Large Screen Radiator: Engine Standard Matching Fuel Tank: 1,000 Litres Battery: 2x Camel 12V Weight: 6,000 kg approx. - Waste Water Handling - Dewatering Process - Tailing Dams - Water Production - Rainstorm Water Clearance Water Evaporator Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Queensland, Australia

    MODEL

    OIE187

  20. Water Evaporator (POA) (sale-ehub3873)
    For Sale
    $0.00
    Model: OIE187 Cannon Fan: 425,000 m3/hr / Dual Fiber Glass PAG Impeller Discharge Hose: 1.5" Inch & 500 PSI High Pressure Pump: 7-8 Bars Discharge Fan Power: 130 kW Pump Power: 55 kW Pump Flow: 150 m3/hr Evaporation Rate: 24.98 lps @ 60% Daily Operating Time: 10 Hours + - SS Ring with Nozzles - Spiral Nozzle SS316 - Fan Safeguard Mesh - Control Panel Generator Make: Shanghai Stamford Brushless Engine: Dongfeng Cummins Control System: HGM6110 Large Screen Radiator: Engine Standard Matching Fuel Tank: 1,000 Litres Battery: 2x Camel 12V Weight: 6,000 kg approx. - Waste Water Handling - Dewatering Process - Tailing Dams - Water Production - Rainstorm Water Clearance Water Evaporator Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Queensland, Australia

    MODEL

    OIE187

Set Ascending Direction

82 items

per page