Search results for: 'brand greas hose for size'

Make: MPI Model: NF500 Year: 2024 Hours: 11 - Triplex - Oversize transmission cooler fitted to radiator support - All high pressure piping, Cameron Gauges, PRV’s, etc. have test certificates - Pulsation Dampener has design registration certificates - Transmission has lock indicators visible to the operator - Transmission has over temp alarms and lights, and “quick to neutral” to further protect the transmission - Dual post battery isolators and starter isolators - Test certificates and register for the hydraulic hosing for the self- loading legs Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn More

Make: MPI Model: NF500 Year: 2024 Hours: 26 - Triplex - Oversize transmission cooler fitted to radiator support - All high pressure piping, Cameron Gauges, PRV’s, etc. have test certificates - Pulsation Dampener has design registration certificates - Transmission has lock indicators visible to the operator - Transmission has over temp alarms and lights, and “quick to neutral” to further protect the transmission - Dual post battery isolators and starter isolators - Test certificates and register for the hydraulic hosing for the self- loading legs Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn More

Drill Bits; Model: DHD380 Size: 8" Inch / 9" Inch / 10" Inch - T45 & T51 - 85 mm to 135 mm - Includes some Shank Adaptors and Couplings, etc. Quantity: Approx. 200 Shank Adaptors; Make: Sandvik Model: HL1000T45 / HL1000T51 - Third Shank but size unknown; 3" Inch Blast Hole Bits Hammer Rock Drill Bits Location: Northern Territory, Australia Learn More

Hammers; 1x Halco 8" Inch Hammer - Running 8" Inch Bits - 1x Used & 1x New 1x Halco 8" Inch Hammer - With Integral Spiral Stabiliser to give 10" Inch OD - Running 10" Inch Bits with Retention; 2x Used - Good Condition & 1x Brand New Drill Pipe; Length: 4.5" Inch Type: 2 7/8" Inch IF Threads - Most Near New - Done 6x Bores (All less than 100 Metres) - Cleaned & Greased - Fitted with Thread Caps & Plugs Drill Pipe & Hammers Package Location: South Australia Learn More

Rig Make: UDR Model: 1000 Hours: 270 (Since Engine Rebuild) Engine: Detroit GM 6V-71 (Completely Rebuilt) - Head Rebuilt, All New Selectors, Gear Train, Bearings and Upgraded to Splined Output Spindle and Shaft (17 Hours used since) - Genuine Sandvik Parts Used - Hydraulic Motor tested (when apart and in good condition) - No Cylinder leaks - Lots of Hoses replaced - Slight leak from Control Panel - Good gauges and spool valves - Hydraulic Tank repaired, cleaned, and new filters and new oil (12 hours ago) - Bean Pump has new fluid end and in good condition - Table Modified to accept 400 mm Casing and running 300 mm Square Slips Plate - Original UDR Table available - Rod Safety Cage Included Truck Make: International Model: Acco T2650 Engine: Cummins 350 Big Cam Transmission: 18 Speed Road Ranger Type: 8x4 - No Oil Leaks - Lots spent for Rego - Cab has minimal rust - Tyres New 3 years ago and done 7,000 km's since Truck Mounted Drill Rig Location: South Australia Learn More

Make: Caterpillar Model: 390FL Year: 2020 Hours: 19,391 - Auxiliary Hydraulics (Never Used - Hoses were removed) - 2x Buckets in Good Condition; 1x with almost no use - No EPA Track Mounted Excavator Location: South America Learn More

Make: Caterpillar Model: 773G Year: 2014 Hours: 23,585 Idle Hours: 13,606 - New Tank - 3x Adjustable Rear Spray Heads - 2x Side Spray Heads - Hose Reel - Water Cannon - Top Fill Water Truck Location: United States of America Learn More

Make: Everdigm Model: Rocky B180 Bit Shank: N180 Shank Connection: API 8-5/8" Inch Reg. Pin Piston Stroke: 5.75" Inch Cylinder Bore: 12.28" Inch Hole Sizes: 18" Inch ~ 26" Inch Wrench Size: A/F 14" Inch - Brand New - Bailing Subs/Break Out Plate, etc. - Hammer forklift cradle included - 19” Hammer bit included (unused) RS Hammer Location: Queensland, Australia Learn More

Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - Warman Clamps - Under Casing Clamps - Wireline and Main Winch - Rod Bin - Auger Carrying Rack at Front of Rig - Auto SPT - Silvan Pump - All New Suction and Hydraulic Hoses for Pump with Camlocks - 2x Mud Tanks (1,000 L & 500 L - Plastic) Down Hole Gear - 10x 3m PQ Rods Plus Shorts - 10x 3m HQ Rods Plus Shorts - 10x 3m NQ Rods Plus Shorts - 10x 3m Junior Mayhew Rods with Spanner Flats Plus 2x 1.5 m - 5x 100mm x 1.5m Augers Plus Bit & 20 Pins - 2x 1.5 NMLC Core Barrels - 6x NMLC Core Bits - 4x Impreg & 2x Surface Set - 40x Core Lifters / 6x Cases / 40x Stop Rings - 2x NMLC Reamers - 2x BQ Reamers - 3x BQ Core Bits - 2x 1.5m NQ3 Core Barrels - 2x Sets of Splits - 1x 3m NQ3 Core Barrel - 2x Locking Couplings - 2x Adaptor Couplings - Box of Barrel Spares - 1x HQ/NQ Overshot - 1x Set of PQ, HQ, NQ Inner Tube Wrenches - 10x 75mm Shelby Tubes Plus Drive Head - 10x 50mm Shelby Tubes Plus Drive Head - 2x SPT Samplers - 2x Pulling Plugs - 1x Spare Water Swivel Plus 2x Repair Kits - 1x Repair Kit for Rig Swivel - Many Subs to Facilitate all the Drilling Requirements - Stillsons - 2x 36" Inch, 2x 24" Inch & 2x 18" Inch - 1x Gas Mig Welder - 1x Honda 3.5 kVA Powered Generator - 1x PQ Birds Mouth for Water Return to Mud Tanks - 1x HQ Birds Mouth for Water Return to Mud Tanks - New Suction and Delivery Hoses - 1x 100mm Down Hole Hammer with 2x Bits 118mm *New* - 1x 75mm Down Hole Hammer with 2x Bits 95mm *New* Support Truck Make: Mitsubishi Model: Canter Year: 2009 Type: 4x4 - Hydraulic Hi-Ab Crane - 500 Litre Water Tank - 400 Litre Diesel Tank for Rig & 12 Volt Pump - 1x kVA Inverter - Wired so diesel pump won't engage until the switch is turned on in the locked tool box. - 1x Centrifugal Pump 1 1/2" Inch plus Suction and Delivery Hoses with Camlocks - 2x Tool Boxes - 1x Box of Hand Spanners & Sockets - Fitted Drill Rod Bins & Core Barrel Bins - Currently Registered until May 2025 Tracked Mounted Drill Rig Support Truck + Down Hole Gear Package Location: New South Wales, Australia Learn More

Make: Remet Size: 4" Inch Length: 3 Metres Quantity: 54 - RC - With Inner Tubes Drill Pipe Location: Queensland, Australia Learn More

- Complete Foot Clamp (ex Jaws) - BQ Jaw Set c/w Teeth - NQ Jaw Set c/w Teeth - HQ Jaw Set c/w Teeth - PQ Jaw Set c/w Teeth - PWT Jaw Set c/w Teeth - In Cast PQ Jaw Set - Jaw Teeth Insert Set *Brand New Location: New South Wales, Australia Learn More

Sizes: 3" Inch / 4" Inch / 5" Inch Working Pressure: 2,500 PSI - Basic Hard Shut in Nitrile Bladder - Wireline Stripper - Hydraulic Activator - Hand Pump Activator - All Hoses Burst Protection or Fire Protected - Zone One Hoses are Coflexip and Armour Plated - Casing Adaptor to be purchased Annular Diverter Location: Queensland, Australia Learn More

- Fully Hydraulically Operated - No Electrics - Various API Screen Sizes available - 600 GPM Jack Up Rod Sloop Mounted Shale Shaker Location: Queensland, Australia Learn More

Make: G&K Model: 850 Engine: Caterpillar CAT 3208 (Rebuilt) Hours: 200 approx. - Replaced Extensive Hydraulic Hoses - Bean Pump on deck - 72 Metres of 4" Inch Waterbore Drill Pipe, comes with Head Tubes and Air Swivel Lots of Spares; - 2x Spare Heads -2x Spare Winches -1x Spare Wireline Drilling Capacity; 12" Inch Hole: Approx. 200 + Metres NQ: 800 Metres HQ: 600 Metres Truck Mounted Waterbore / Diamond Drill Rig Location: Victoria, Australia Learn More

Rig Make: UDR Model: 650 Onboard Compressor: Sullair 1,150 CFM / 350 PSI Air Compressor - Set up for Waterbores, RC and Aircore - Table opens up to allow 14” inch casing or bit - Recent major service of Air End, Separator Filter & New Oil - New Head Slides - New Jib Ram - New Pull Down Ropes - Head Serviced Includes; - Cyclone & Splitter - New Bull Hose - 25x Used 4” Inch RC Rods with Inner Tubes - 2x Head Tubes - Air RC Swivel - Mud Rotary Swivel - Hydraulic Breakout Arm - 4” Inch Airdrill RC Hammer (in Good Condition) & 2x Hammer Tubes - 7x 5” Inch Hammer Bits (Used) - 1x 4” Inch Back Hammer - 1x 8” Inch Aircore Bit - 4” Inch Aircore Bits (2x New & 3x Used) - Blow Up Sub - 1x 4 ½” Inch PDC Bit - 6” Inch Casing Elevator Set - Diverter Box with 20x Rubbers - Stuffing Box - Rod Spanner to suit - Dig Out Sub Rig Truck Make: Volvo Year: 2012 - Twin Steer Option 1 – Water Bore Drilling Equipment (Additional $15,400 ex GST) - 12” Inch Blade Bit (Near New) - 7 7/8” Inch Blade Bit - 8” Inch Tri-Cone Med Formation (Near New) - 6” Inch Shreps Hammer with 6” Inch & 8” Inch Bits (New) - Adaptor Subs to suit - Rod Spanners to suit - Casing Elevators Option 2 – RC Rods (Additional $55,000 ex GST) - 180 Metres of RC 4” Inch Remet Rod String (New) Option 3 – Hooklift Truck + Bins ($55,000 ex GST) Truck Make: Isuzu Year: 2000 - Hooklift Truck Bins; 1st Bin: 6x5 Gardner Denver Mud Pump with Perkins Engine 2nd Bin: To carry PVC and Gravel 3rd Bin: To carry Water Suttles Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Ozcon Size: 12-3/4" Inch Length: 6 Metre Quantity: 7 Casing Location: Queensland, Australia Learn More

Size: 5-9/16" Inch Length: 6 Metre Quantity: 25 Casing Location: Queensland, Australia Learn More

Make: HWT Length: 6 Metre Quantity: 45 - Surepipe - Brand New Casing Location: Queensland, Australia Learn More

Make: Gertec - Brand New - Never Used Skid Mounted Grout Unit Location: Victoria, Australia Learn More

Make: Doosan Models (Suitable): PA536, XHP1250 & XHP1170 - Brand New - Tailored to meet specific requirements - Inclusive of Warranty Air End Location: Australia Learn More