Search results for: 'excavator auger size rang spares in australia'

Make: Caterpillar Model: 6015 Year: 2022 Hours: 0 - Not Assembled Track Mounted Excavator Location: Indonesia Learn More

Rig Make: Edson Model: 350 Hours: 4,500 Air Compressor: Compair/Broomwade (Plate No: C20450/206) - 25x Rods @ 2,050 mm long - 1x with Downhole 75 mm Hammer attached - 2x 75 mm Button Bits for Hammer and numerous Drag Bits included - 3x Bog Mats for Stabiliser Legs - 2-3x Rods have worn threads that would need re-machining/built up Vehicle Make: Toyota Model: 75 Series Landcruiser Year: 1975 Vehicle Mounted Drill Rig Location: Victoria, Australia Learn More

Make: Terex Model: Hi-Ranger TM105 Year: 2007 Hours: 1,026 / 711 (PTO) Working Height: 105' Foot / 32 Metre Side Reach: 51' Foot / 15.5 Metre - 66kV Insulated Boom - Flashing Beacons - In Date until 12/2030 *Truck Is Not Included* Elevating Work Platform Location: Western Australia Learn More

Model: 500BBL Suction: 4x4" Inch Return Lines: 3x4" Inch (1x Per Tank) Washdown: 1x3" Inch Drains: 1x4" Inch each Tank - 2x5" Inch Hydraulic Cylinders - Onboard HPU 12/24 Volt - Solar Panels & Trickle Charger - Hydraulic Access Stair - Hydraulic Walkway Handrails on Roof - Tank can be removed and replaced easily, reducing replacement costs Fluid Capacity; Sand Trap: 35 BBL Front Tank: 215 BBL Rear Tank: 250 BBL Safety Features; - Internal Wash Down Lines and Jets to prevent need for confined space access on site - Davit Arm Socket on Roof - Large Tank Access Doors for maintenance / inspection Frac Tank Location: Queensland, Australia Learn More

Make: Rockdrill Model: RD700 Hours: 33,037 - Mounted on Modified Caterpillar Log Skidder - Recently Replaced Skidder Turbo - Deutz 6 Cylinder Turbocharged Power Pack - 2x Brand New Hydraulic Pumps & 1x Used - Onboard Sullair 500 CFM / 350 PSI Air Compressor with Caterpillar CAT 3208 Engine (Hours: 4,924) - 150x Metres of RC Rods - 4x Hammers inc. 1x Open Water Bore Hammer and Blade Bits - Several Pallets of Spare Parts, Consumables, and Spare Tyre - Blade on Front for ease of Track/Pad Set Up - Hasn't been operated in 2 years but has since deteriorated a few hoses and ram seals from sitting - Emergency Stop System needs work - Started every 4 months to keep oil around internals but needs work before job - Not Registered Modified Log Skidder Drill Rig Location: Queensland, Australia Learn More

Rig Make: Reichdrill Model: T-100 Year: 1992 Hours: 3,567 Engine: Cummins (700 HP) Pull Up: 50 Tonne Pull Down: 20 Tonne Capacity: 1,200 m - Hydraulic Pipe Handler attached to Mast - 2 Speed Head - 140 RPM Max. Rotation - 132,000 lb Torque - Manual Slips w/ Dies to suit 2 3/8" Inch, 2 7/8" Inch & 3 1/2" Inch Pipe - Has sat for 3 years, need some refurbishment - Heavy Duty, Deep Water Rig Carrier Make: Custom Miles: 17,064 Engine: Cummins Crane Carrier Mounted Drill Rig Location: Queensland, Australia Learn More

Includes; - 7x NMLC Bit and Reamers - 3x NMLC Bits - 2x NMLC TC Core Bit - 1x HMLC Used Bit and Reamer - 1x HMLC New S15 Core Bit - 1x HMLC New Reamer - 1x HMLC Used Core Bit - 1x Tri Cone 2 15/16" Inch - 1x Tri Cone 3 7/8" Inch - 1x HQ3 Bit Reamer Fordia S11/14 - 5x HQ3 Used IMP Bits - 2x HQ3 TC Core Bits - 1x PQ3 Near New IMP Core Bit - 1x C4 IMP Bit and Reamer - 1x NW IMP Shoe Bit - 1x NW TC Shoe Bit - 1x HQ Rod TC Shoe Bit - 2x NQ3 Near New IMP Core Bits - 3x NQ Reamers - 1x NQ Rod Reamer - 1x NQ New IMP Core Bit Hayden S14/15 - 1x HQ New Reamer - 1x HQ Near New Reamer - 1x New 3 7/8" Inch Drag Bit - 2x Near New 4 1/2" Inch Drag Bit - 1x NMLC New Hard Core S6 - 1x NMLC New Reamer - 1x NQ3 Hard Core S15 - 9x 2 Metre Used RC Rods - 1x Used 1.5 Metre RC Rod with Bit - 4x Worn Augers - 1x Used 4 1/2" Inch Bit - 1x New 4 1/2" Inch Bit - 1x 6 1/2" Inch Drag Bit - 1x 100 mm Tube Adapter - 1x 75 mm Tube Adapter - 2x 50 mm Tube Adapter Plus 50 mm Piston Sampler Drilling Consumables Package Location: Queensland, Australia Learn More

Make: Wacker Neuson Model: TH412 Year: 2020 Hours: Less than 500 Engine: Yanmar 3TNV80FT @ 25HP Chassis Operating Pressure: 5,510 PSI / 380 bar Hydraulic Operating Pressure: 3,190 PSI / 220 bar Payload Max: 1,250 kg Payload Lift Max: 1,250 kg Lift Bucket Swivel: 4,537 mm Dimensions Length: 3,944 mm (2,991 mm w/out Bucket) Width: 1,564 mm Height: 5,280 mm (1,995 mm Just Cab) Weight: 2,750 kg - Forklift Attachment - Side Shift - Air Conditioning / Heating & Ventilation - ROPS / FOPS tested with VSG safety window on right side - Front, Roof & Rear Wipers - Heated Rear Window - Tilt Display - Sun Shade - Bottle Holder - Storage Net - LED Work Lights (1x Front & 1x On Cab Roof) Telehandler Location: Western Australia Learn More

Type: Cavins 80 Tonne Model C (Chinese Copy) Slips: 2 3/8" Inch / 2 7/8" Inch / 3 1/2" Inch Condition: Brand New Tubing Spider Location: Victoria, Australia Learn More

Make: Exploration Drill Masters EDM Model: 95K Year: 2018 Hours: 32,431 Drill Head Hours: 32,431 Compressor Hours: 32,431 Onboard Air Pack: Sullair 1,150 CFM / 500 PSI Air Compressor - Spare Parts available (can provide a detailed list with pricing) - EDM MK2 Core Rod Feeder (For additional $USD350,000) Track Mounted Drill Rig Location: United States of America Learn More

Model: MI1 Year: 2024 Hours: 0 (Never Used - In Storage) - Designed for Ute or Trailer Quantity: 2 Auger / SPT Drill Rig Location: Victoria, Australia Learn More

Make: AFHTechFLOW Package Type: Gas Heating & Pressure Regulating Skid Application: Fuel gas conditioning for gas engine / generator Year: October 2014 Fluid: Natural Gas / Fuel Gas Typical End Use: GE Jenbacher Gas Generator Fuel Gas Train Electrical Supply: 415 V, 3-phase, 50 Hz Heater Power Load: ~11 kW Gas Inlet Connection: Flanged pipeline inlet Gas Outlet Connection: Flanged connection to engine gas train Drains: Heater vessel drain Relief: PSVs vented to atmosphere Earthing: Dedicated skid earth lug Nominal Gas Flow: 330 Nm³/hr Maximum Flow Rate: 330 Nm³/hr Inlet Pressure (Operating): 35 – 90 barg Inlet Pressure (Design / MAOP): 102 barg (upstream of regulator PRV2301) Outlet Pressure (Operating): 4 barg Inlet Temperature: 2 – 60 °C Outlet Temperature: 0 – 40 °C Design Temperature Range: -15 to +60 °C Gas Quality Assumption: Pipeline Quality Natural Gas Gas Heating System; - Electric gas heater, 10.8 kW - Explosion-protected heater suitable for Zone 1 - Carbon steel pressure vessel heater housing - 100 NB, Class 600 - Designed to AS 1210 PT100 RTD temperature elements; - Element sheath over-temperature protection - Heater outlet temperature control Thyristor-controlled heater system; - Control panel supplied separately for non-hazardous area installation - Heater pressure safety relief valve Pressure Control & Safety; - Primary pressure regulator (carbon steel body) - Over-pressure shut-off valve with fracture disk - Pressure safety relief valve (PSV) - Pressure gauges with block and bleed valves - Manual isolation ball valves (Class 800) Gas Filtration & Separation; - Cyclone separator for liquid droplet removal - Particle filter rated >3 µm - Designed to prevent condensate and solids entering engine gas train Fuel Gas Conditioning Skid Location: Queensland, Australia Learn More

Make: Sinocan Engineering Corp. Model: CSF500 Year: 2006 Engine: Detroit 60 Series 6063HV39 Performance at Max: 500 HP Input 165 SPM Skid Mounted Mud Pump Location: Western Australia Learn More

Make: Compressor Systems Australia Pty Ltd (CSI) Year: 2012 Vessel Type: Vertical Gas Coalescer Vessel Designed Service: Coal Seam Gas (CSG) Design Code: AS 1210:2010 Hazard Level: B (AS 4343) Registered Design Number: Q26409 - Does NOT INCLUDE Control System Module or Wiring Mechanical (Each Vessel); Internal Volume: 460 L Orientation: Vertical Shell Material: AS1548 PT460NR Head Material: AS1548 PT460 Corrosion Allowance: 3 mm PWHT: Nil Weight; Empty: ~550 kg Full: ~850 kg Pressure & Temperature; Design Pressure: –101.3 kPa to 1,000 kPa Maximum Operating Pressure: 930 kPa Hydrostatic Test Pressure: 1,500 kPa Design Temperature: –10 °C to + 85 °C MDMT: –31 °C Maximum Operating Temperature: 50 °C Internals; - Replaceable coalescing filter elements (micron rating TBC) - Bottom liquid sump with drain connection - Top removable head for element access Total Installed Coalescing Volume: ~920 L Pressure Regulation; Make: Fisher (Emerson) Model: Big Joe® Type 630 Function: Downstream pressure control following coalescing Maximum Differential Pressure: 250 PSIG Casing Pressure: As per manufacturer nameplate Instrumentation; Level / Condensate Monitoring: Rosemount Transmitter Tag: BB76-LIT-700034B - Instrumentation associated with condensate collection and drain system - High-pressure rated instrument chamber Configuration & Key Features; - Parallel twin-vessel (A/B) arrangement - Individual isolation valves per coalescer - Common inlet and outlet headers Designed for: - High-availability CSG operations - Online maintenance - Reduced pressure drop - Protection of downstream compression, metering, and pipelines Asset Classification; Twin Coal Seam Gas (CSG) Coalescer Vessel and Pressure Regulation Skid AS 1210 Pressure Equipment – Hazard Level B Skid Assembly; Overall Dimensions (Approx.): 8.4 m (L) × 2.5 m (W) × 3.8 m (H) - Structural steel skid, gal with grated deck - Integrated access ladder and elevated maintenance platform - Painted carbon steel pipework - Outdoor-rated for field installation Twin Gas Coalescer & Pressure Regulation Skid Location: Queensland, Australia Learn More

Model: 7 1/2" Inch x 10" Inch Condition: Good - Hydraulic Drive Mud Pump Location: Queensland, Australia Learn More

Make: Sandvik - Unused/Still in Crane Rod Handler Location: New South Wales, Australia Learn More

Model: 600X Engine: John Deere Tier 4F - Stage V - Model: 4045CI550 @ 173 HP Pull Down Force: 7,000 kg Retract Force: 10,000 kg Feed Down Speed: 0-23 m/min Feed Retract Speed: 0-13.5 m/min Feed Stroke: 2.1 m Mast Dumping: 950 mm Rod Rack Capacity: 100 ft AWJ + 100 ft NQ Auger Rack Capacity: 50 ft of 3 1/4" Inch Hollowed Augers Features; - Engine Leveler - Engine Controller Unit - Pulling/Carrier Winch - 3x Night Lights - 2x Mud Pumps; Progressive Cavity Pump & Piston Pump - High Capacity Winch & Wireline Winch - Double Rod Clamp Breakout System - Automatic SPT Hammer - 16 Speed Rotation Head - Driller Platform - Toolbox Optional Features; - 4x Camera CCTV System - DSE Power Unit Parameters - Drilling Parameters - JD (John Deere) Link Track Mounted Multipurpose Hydraulic Drill Rig Location: United Arab Emirates Learn More

Make: Isuzu Model: NQR Series Year: 2017 KM's: 137,385 - Rego & RWC on sale Service Truck Location: Queensland, Australia Learn More

Drill Rig Make: Bourne Model: 1250 Rig Hours: 9,724 Compressor Hours: 4,707 - Onboard Sullair Air Compressor - Onboard Mud Pump - Onboard Mist Injection Pump - Onboard Welder Rig Truck Make: Volvo Model: FL10 Year: 1998 KM's: 403,226 GVM: 30,000 kg Type: 8x4 C/Cab Support Truck Make: Volvo Model: FM MK2 Year: 2009 KM's: 132,459 GVM: 32,000 kg Type: 8x4 C/Cab - Palfinger PK16502 D Crane Includes; - Drill Pipe - Water Tank - Gardner Denver 1FXG-172 Trailer Mounted Mud Pump Truck Mounted Drill Rig Support Truck with Crane Drill Pipe, Water Tank, Mud Pump Package Location: Australia Learn More

Make/Model: DE740 Engine: Cummins QSB6.7 Inline 6 Cylinder Tier 3 Depth Capacity; TK56: 3.187 m B: 2.350 m TK66: 2.731 m N: 2 m TK76: 1.886 m H: 1.4 m P: 831 m Feed Force: 6.8 Tonne (15,000 lbf) Pull Force: 13.6 Tonne (30,000 lbf) Feed Length (Stroke): 3.45 m Speed Up & Down: 30 m/min Features; - "P" Size Chuck Drive C40 Rotation Head with Hollow Spindle and Stepless Speed Control - Telescoping Upper Mast - All Hydraulically Operated - Self-Propelled Drill Unit - Rod Spin Guard - 1x Rod Clamp can support; B, N, H, P and S Rod Sizes; 44.5 mm to 177.8 mm - Head Traverse System directly coupled to Rotation Head Carriage - Wireline Wiper and Safety Cut Out + Options Drill Rig Location: TBA (New Build - Built to Order) Learn More