Search results for: 'hire for skid button mi'

Make: Sullair Model: 900/1150XH Year: 2006 Skid Mounted Air Compressor Location: Western Australia Learn More

Make: Black Diamond Model: HJGCXT 08 Year: 2023 Type: 3.5" Inch - 10" Inch Skid Mounted Hammer Breakout Unit Location: Queensland, Australia Learn More

Make: Custom Made Model: GT500 Year: 1997 Dimensions; Length: 2 Metres Width: 1.5 Metres Height: 1.2 Metres Weight: 680 kg each Bowl Capacity: 500 Litres each - Mazda Power Packs or larger most suitable for these mixers - Last Used approx. 2014 - Controlled Independently - Specifically designed to mix large volumes of High Early Strength Non-Shrink Grouts very quickly - Cycle times were designed to be less than eight minutes and continuously - Indeed full truckloads of fast setting grouts were mixed and placed using these machines in less than a shift - Mixers were commonly mounted and used from the back of our truck - There are two mixers; a left hand and a right hand - When used together the controls were in the centre between the mixers - When configured like this one operator would control both machines - One machine would be dumping while the other one was mixing - Output was continuous and in less than eight minutes per batch - Mixed grout was dumped into a hopper and taken to the site needed - Forklift Channels (Center Balanced) - Machine has mixed; Proprietary Cement Grouts, Non-Shrink Grouts, Small Aggregate Concrete, etc. - Hydraulic Driven Skid Mounted Grout Mixers & Hoppers Location: Queensland, Australia Learn More

Unit #1 Make/Model: Custom Made Year: 1995 KM’s: 40,000 Power Pack Hours: 140 Engine: Mazda Diesel 4 Cylinder Dual Fixed Displacement Hydraulic Power Pack Dimensions; Length: 2.2 Metres Width: 1.1 Metres Height: 1.1 Metres Weight: 1,060 kg - Last Started July 2025 - No Batteries (24 Volt System) - Fixed Displacement Pump @ 32cc per rev with Working Pressure @ 2,500 PSI. - Fitted with a Piggy Back - Fixed Displacement Pump @ 11cc per rev with Working Pressure @ 2,500 PSI - All Safety Guards Available - Compliance Labelled - Gauges: Oil Pressure, Fuel Gauge, Hour Meter, Charge, Battery Isolation Lock Out, etc. - Emergency Stop Switch - Throttle - Key Start - Forklift Channels (Center Balanced) - Crane Lifting Eyes on Corners Unit #2 Make/Model: Custom Made Year: 1995 KM’s: Less than 40,000 Power Pack Hours: 51 Engine: Mazda Diesel 4 Cylinder Variable Displacement Hydraulic Power Pack Dimensions; Length: 2.2 Metres Width: 1.1 Metres Height: 1.1 Metres Weight: 1,060 kg - Last Started July 2025 - No Batteries (24 Volt System) - Fixed Displacement Pump @ 45cc per rev with Working Pressure @ 2,500 PSI. - All Safety Guards Available - Compliance Labelled - Gauges: Oil Pressure, Fuel Gauge, Hour Meter, Charge, Battery Isolation Lock Out, etc. - Emergency Stop Switch - Throttle - Key Start - Forklift Channels (Center Balanced) - Crane Lifting Eyes on Corners Quantity: 2 Skid Mounted Hydraulic Power Units Location: Queensland, Australia Learn More

Make: New Holland Model: B115B Backhoe Location: New South Wales, Australia Learn More

Make: Drill Techniques Model: GM-2GI Year: 2020 Height: 3.5 Metres Tare: 4,000 kg Hydraulic Jack Up Grout Unit Location: New South Wales, Australia Learn More

Capacity: 15,000 Litre Quantity: 15 Above Ground Waste Sumps / Tanks Location: New South Wales, Australia Learn More

Make: Brevini Year: 2017 Hours: 0 (Complete Overhaul in June 2025) Weight: 1,650 kg - All Hydraulics and Electrics have been fully re-conditioned - 55kW Electric Motor driving a hydraulic pump, which in turn drives a reciprocating high pressure water pump with a maximum output of 90L/min of water at 180 Bar pressure. - The complete pump system has been designed to run continuously and all equipment is housed within a fully enclosed cover. - As the motor drives a hydraulic pump, the high pressure water output is fully adjustable while the motor runs at a constant speed, unlike a high pressure water pump that is direct driven by a fixed speed electric motor. Additionally, because the hydraulic circuit incorporates an unloader valve, it is possible to switch the high pressure water on and off without the need to stop the motor or bypass high pressure water into a holding tank. - The hydraulics system is of robust construction containing 300L of oil and an integrated oil cooler. - The system can also be used as a 55 kW hydraulic power pack. Skid Mounted Pump Location: Queensland, Australia Learn More

Sizes: 3" Inch / 4" Inch / 5" Inch Working Pressure: 2,500 PSI - Basic Hard Shut in Nitrile Bladder - Wireline Stripper - Hydraulic Activator - Hand Pump Activator - All Hoses Burst Protection or Fire Protected - Zone One Hoses are Coflexip and Armour Plated - Casing Adaptor to be purchased Annular Diverter Location: Queensland, Australia Learn More

- Fully Hydraulically Operated - No Electrics - Various API Screen Sizes available - 600 GPM Jack Up Rod Sloop Mounted Shale Shaker Location: Queensland, Australia Learn More

Model: HT400 Engine: Cummins Transmission: Alison Gearbox - Variable Speed - 450 to 500 GPM Skid Mounted Triplex Mud Pump Location: Queensland, Australia Learn More

Make: Elgi Year: 2023 Hours: 364 - Like New 900 CFM 350 PSI Skid Mounted Air Compressor Location: Queensland, Australia Learn More

Make: Mosa Model: DSP 400 YSX-PL Skid Mounted Welder Location: Queensland, Australia Learn More

Make: Gertec Model: IS-38-E Serial Number: 44390 Skid Mounted Grout Unit Location: Victoria, Australia Learn More

Make: Gertec - Brand New - Never Used Skid Mounted Grout Unit Location: Victoria, Australia Learn More

Make: Caterpillar Model: C15 Year: 2006 Hours: 1,533 • 440 HP @ 2,100 RPM • 1482LB-FT @ 1,400 RPM • Air to Air intercooled • 12 Volt (We can covert to 24 Volt if required) • SAE #1 flywheel housing multi fit industrial flywheel. • If required, we can supply and install a Caterpillar Air Compressor to the motor which runs off the auxiliary drive. The motor has been removed from the unit and fully workshop inspected and run up under load on the Dyno, results are as follows: Workshop inspection: • Intake manifold clean. • Cylinder head and rocker gear clean, no moisture or sludge, tune ok. • Turbocharge in nice condition, no excessive shaft play. • Camshaft in nice condition, no pitting • Crankshaft in good condition (Standard) • Main bearings and Con rod bearings in good condition – minimal wear • Crankshaft end float within spec Load test Report • Oil pressure: Cold Idle 70psi / Cold Top Revs 85psi / Hot Idle 50psi / Hot Top Revs 75psi • Water temps: Top Radiator 92 degrees. Bottom Radiator 69 degrees. • Thermostat opened and engine recovered correctly. • Turbocharger boost: 23 PSI @ 2,100 RPM • Breathing/ Blow by: 20 mm @ idle 30 mm @ 1,200 RPM 50 mm @ 1,350 RPM. 120 mm @ 1,800 RPM. • Smoke condition: small amount of black on startup, none at idle and very small white under full load. Skid Mounted Engine Location: Queensland, Australia Learn More

Make: Tulsa Triplex Model: TT-560 Engine: Caterpillar CAT C15 Skid Mounted Mud Pump Location: New Zealand Learn More

Make: Baoji Oilfield Machinery Model: F-800 Skid Mounted Mud Pump Location: New Zealand Learn More

Rig Model: ZJ50D/3150 Year: 2012 Mast Model: JJ315/45-K6 Substructure Model: DZ3159-S Drawworks Model: JC50D Power: 1,500 HP Rotary Table Model: ZP-375 Full Opening: 37.5” Inch Rotary Speed: 300 RPM Mud Pump Power: 1,600 HP Stroke: 120 RPM Working Pressure: 5,000 PSI Quantity: 2x Mud Tank Shaker Tank: 25 CuM Intermediate Tank: 40 CuM Suction and Mixing Tank: 20 CuM Solids Control - 3x Shale Shaker - 1x Mud Cleaner - 1x Centrifuge Drill Rig Location: Japan Learn More

Make: SPM Weir Model: TWS2250 Year: 2022 (Reman Rebuild) Hours: Approx. 7,000 Engine: Caterpillar CAT C32 (Rated @ 1,350 HP) Transmission: Allison 8000 Series Auto (DP8962R) Dimensions; Length: 9,135 mm (Overall) Width: 2,505 mm Height: 2,615 mm (On Ground) Height: 4,280 mm (Raised) Weight: 20,000 kg - When raised has enough height for a trailer of 1,500 mm to drive underneath Skid Mounted Jack Up Frac Mud Pump Location: Queensland, Australia Learn More