Search results for: 'hose for side arizona'

Rig Make: UDR Model: 650 Onboard Compressor: Sullair 1,150 CFM / 350 PSI Air Compressor - Set up for Waterbores, RC and Aircore - Table opens up to allow 14” inch casing or bit - Recent major service of Air End, Separator Filter & New Oil - New Head Slides - New Jib Ram - New Pull Down Ropes - Head Serviced Includes; - Cyclone & Splitter - New Bull Hose - 25x Used 4” Inch RC Rods with Inner Tubes - 2x Head Tubes - Air RC Swivel - Mud Rotary Swivel - Hydraulic Breakout Arm - 4” Inch Airdrill RC Hammer (in Good Condition) & 2x Hammer Tubes - 7x 5” Inch Hammer Bits (Used) - 1x 4” Inch Back Hammer - 1x 8” Inch Aircore Bit - 4” Inch Aircore Bits (2x New & 3x Used) - Blow Up Sub - 1x 4 ½” Inch PDC Bit - 6” Inch Casing Elevator Set - Diverter Box with 20x Rubbers - Stuffing Box - Rod Spanner to suit - Dig Out Sub Rig Truck Make: Volvo Year: 2012 - Twin Steer Option 1 – Water Bore Drilling Equipment (Additional $15,400 ex GST) - 12” Inch Blade Bit (Near New) - 7 7/8” Inch Blade Bit - 8” Inch Tri-Cone Med Formation (Near New) - 6” Inch Shreps Hammer with 6” Inch & 8” Inch Bits (New) - Adaptor Subs to suit - Rod Spanners to suit - Casing Elevators Option 2 – RC Rods (Additional $55,000 ex GST) - 180 Metres of RC 4” Inch Remet Rod String (New) Option 3 – Hooklift Truck + Bins ($55,000 ex GST) Truck Make: Isuzu Year: 2000 - Hooklift Truck Bins; 1st Bin: 6x5 Gardner Denver Mud Pump with Perkins Engine 2nd Bin: To carry PVC and Gravel 3rd Bin: To carry Water Suttles Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Rig Model: TT300 Hours: 18 Engine: Deutz F6L912 / 66 kW Rated Depth Capacity: 300 m Feed Cylinder: 100 mm Barrel / 70 mm Shaft / 4 m Stroke Outrigger (Jacks): 4x Boxed Outriggers with 800 m Stroke Foam Pump: 21 Litre per min / 35 bar Foam/Water Tank: 120 Litre Axles: 2x 5 Tonne Air Braked Axles Tower: Direct on Cylinder / Triangle Shape Winch: 1 Tonne Push Down Force: 5,000 kgf @ 175 bar Pull Up Force: 13,000 kgf @ 175 bar Tilt Cylinders: 2x 80 Barrel 50 Shaft Breakout: 300 mm Stroke Cylinder Hydraulic Oil Tank Capacity: 330 Litres - Hydraulic Oil Cooler - Extended Tower to accommodate 4 m Stroke Cylinder - Spanners Included: 1x Breakout / 2x Keeper / 3x Hammer Modifications; - Hydraulically Tilt Rotary Head - Rotary changed to geared Rotary Head with Hollow Spindle (8,000 Nm Torque) - Including 2x Eaton Hydraulic Motors - Side Shift (on rotary head – opens up the tower for longer casing, etc.) Support Truck Make: Volvo Model: FH12 460 KM’s: 1,040,378 Type: 8x4 Air Compressor Make: Atlas Copco Model: XRV1200 Year: 2020 Hours: 122 Engine: Cummins Pressure: 22.7 bar / 330 PSI Engine/Motor Speed: 1,900 RPM Engine/Motor Power: 325 kW / 430 HP 1,200 CFM / 330 PSI - Included Drill Bits, Rods and Drilling Equipment Trailerised Drill Rig Support Truck Air Compressor Package Location: New Zealand Learn More

Mud Pump Make: Sandman Model: Mission Magnum Sandmaster 8x10x14 Year: 2017 Engine: Cummins 6 Cylinder Diesel w/ Clutch - 8 Valve Discharge Manifold on back - 2x 8 Valve Suction Manifold on each side - Flow Meter Trailer Year: 2012 - Pindle Hitch Dimensions; Width: 7.6' Length: 16' Tyres: 245/70R17.5" Trailerised Mud Pump Location: New Zealand Learn More

Rig Make: Schramm Model: 685 Year: 1996 Hours: 2,500 (Since Rebuild) Engine: Cummins K19 Accessories; - FOPS - Rod Rack - 4x Levelling Jacks - In Mast Make/Break Rod Break Out System - Rotating Cyclone Set Up on Metz Manipulator - Airdrill Maker Breaker - Air Spanner - KL Rod Handler Set to 4.5" Inch Pipe - Dual RC Swivel and Auto Blow Down - ROPS Air-Conditioned Drillers Cabin - Complete Re-Hose 11/25 - Fire Suppression Air Compressor Make: Sullair 1,150 CFM / 500 PSI Water Capacity: Approx. 500 Litres Dimensions; Height: 4.6 m Width: 4.0 m Track Mounted Drill Rig Location: Queensland, Australia Learn More

Model: OIE187 Cannon Fan: 425,000 m3/hr / Dual Fiber Glass PAG Impeller Discharge Hose: 1.5" Inch & 500 PSI High Pressure Pump: 7-8 Bars Discharge Fan Power: 130 kW Pump Power: 55 kW Pump Flow: 150 m3/hr Evaporation Rate: 24.98 lps @ 60% Daily Operating Time: 10 Hours + - SS Ring with Nozzles - Spiral Nozzle SS316 - Fan Safeguard Mesh - Control Panel Generator Make: Shanghai Stamford Brushless Engine: Dongfeng Cummins Control System: HGM6110 Large Screen Radiator: Engine Standard Matching Fuel Tank: 1,000 Litres Battery: 2x Camel 12V Weight: 6,000 kg approx. - Waste Water Handling - Dewatering Process - Tailing Dams - Water Production - Rainstorm Water Clearance Water Evaporator Location: Queensland, Australia Learn More

Model: OIE187 Cannon Fan: 425,000 m3/hr / Dual Fiber Glass PAG Impeller Discharge Hose: 1.5" Inch & 500 PSI High Pressure Pump: 7-8 Bars Discharge Fan Power: 130 kW Pump Power: 55 kW Pump Flow: 150 m3/hr Evaporation Rate: 24.98 lps @ 60% Daily Operating Time: 10 Hours + - SS Ring with Nozzles - Spiral Nozzle SS316 - Fan Safeguard Mesh - Control Panel Generator Make: Shanghai Stamford Brushless Engine: Dongfeng Cummins Control System: HGM6110 Large Screen Radiator: Engine Standard Matching Fuel Tank: 1,000 Litres Battery: 2x Camel 12V Weight: 6,000 kg approx. - Waste Water Handling - Dewatering Process - Tailing Dams - Water Production - Rainstorm Water Clearance Water Evaporator Location: Queensland, Australia Learn More

Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - 1x Set of NQ Jaws *New* - 1x Set of HQ Jaws *New* - Cameron Water Gauge *New* - Wrap Around Mast - SPT Hammer Included - Rod Racks - Suction Hose and 2x Double Braid 1" Inch Duffield Bypass Hoses - 5x 100 mm Augers and 1x Bit Plus Drive Sub - 1 1/2" Inch Centrifugal Pump and Hoses - Plus Camlocks *All New* - 36" Inch & 24" Inch Stilsons - Chain Wrench - 1.5 Metre NMLC Core Barrel Plus 5x 3 Metre NQ Rods - 2x Mud Tanks - 7x5' Foot Box Trailer Tracked Mounted Drill Rig Location: New South Wales, Australia Learn More

Rig Make: UDR Model: 650 Hours: 9,202 - Commissioned Mid 2023 - Onboard PTO Driven Air Compressor - New water pump - New fan belts - New radiator core - Recent service with oil & new filters - New rod & piston seals to main feed Ram - New Dump Mast Ram - New rods & seals to mast raise rams - New side shift ram - New break out ram - New rod crane raise ram - New hydraulic valve blocks in control cabinet for main pump & secondary pump controls - New micro control fine feed controller - Replaced majority of gauges with new - New main rotation shaft seals & speedy sleeves - New main rotation torque control cartridge - New hammer oiler pump - New seats & O rings in majority of valve banks Air Compressor - New Air / Oil separator filter - New Oil stop valve - New Castrol Aircoil 68 synthetic oil - New filters - Recently been serviced by Midcoast Compressors Truck Make: MAN Year: 1997 KM's: 200,000 Type: 8x8 Transmission: Recon 18 Speed Gear Box - Kevrek 1500 Hiab Crane with Winch & Umbilical Cord Remote - Radiator back flushed - New Water Pump - New Fan Belts - New brake boosters on every wheel - New four way valve - New valve on brake pedal - Rebuilt Truck Compressor - New air on drivers seat - New air valves on diff locks / cross locks - New clutch, fly wheel & pressure plate - New bearings & seals in Dana drive box - New oil pump on Dana drive box - New universals on tail shafts - New ram on power steering - New tyres all around - All ball joints on truck replaced that were needed, or new rubbers on them - Recently passed Pit Inspection - 7 months Rego as Plant - No need for overhang permits; within length Truck Mounted Drill Rig Location: New South Wales, Australia Learn More

Rig Make: Edson Model: Versadrill 300 Year: 1996 Engine: Hatze - 6x6 Multidrive Technology - Rotation head MR260 Rotation hollow spindle, single speed, dial in, rotation head around 120 rpm - Winching gear on back of mast for hollow augering - Can do diamond drilling if you were to change the hydraulic motor - Dump Mast - Near New Hydraulic Pump - 4x Leveling Jacks - Currently doing 80mtr holes at 4.5” - Client used to aircore with it, but currently set up doing mud - Used to do a lot of Geotech work, 6” hollow augering - Southern Cross Mud pump on the side - 3.2 mtr Stroke - 3 mtr Rods - Extension arm to run 6mtr casing into the ground Ute Make: Toyota Model: Landcruiser Year: 1990 KM's: 107,000 Ute Mounted Drill Rig Location: Western Australia Learn More

Make: Sandvik Model: UDR300D (DE740) Main Winch: 9 m Pull - 30 Tonne Pull Back - 2x Main Traverse Cylinders - Fully Hosed - 3.5 m Stroke - Vertically Stacking Monkey Board - New & Unused Dump Mast Location: Queensland, Australia Learn More

- Completely Refurbished - Engine side has 3 Ringed Pistons instead of the normal 2 Rings 1,300 CFM 750 PSI Skid Mounted Booster Location: Victoria, Australia Learn More

Generator: Honda 2kVA Dimensions; Length: 4 Metres (Inc. Trailer) Width: 1.6 Metres Height: 2.5 Metres Cold Room: 1.2 m x 1.2 m x 1.8 m - Fully Insured & Ready to Go - Mobile- Galvanised Trailer - 2,500 Litre Cold Room - Holds 4x Kegs with 4x Taps (2 Either Side) - Drip Trays on Both Sides - Extra Cold Room Storage - Pull Out Shade Cloths on Both Sides - Party Hire - Camping - Beach Party (Trailer is Purpose Built) - Functions - Corporate - Event Management - Fundraisers Mobile Keg & Chill Cold Room Trailer Location: Queensland, Australia Learn More

Engine: Deutz 3FL2011 - Base Frame to support all components; engine, pump, hydraulics & fuel tanks, etc. - Fuel Tank Capacity: 60 Litres - Access Ladder to Control Platform - Paint, Two Pack Evolution Yellow Hydraulics; - Pump Group Bosch Rexroth - Main Pump A10VO45 Variable Displacement - Pilot Pump 5.5 cc Gear Pump - Maximum Circuit Pressure: 160 Bar - Hydraulic Oil Capacity: 100 Litres - Return Filter: 10 Micron - Hydraulic Oil Cooler and Fan Grout Pump; Make: Bredel Model: SPX 50 - Brevini BR100NC Hydraulic Motor - Slurry Flow Range: 0-85 lpm - Maximum Pressure: 15 Bar - Adjustable Speed Control Mixing Tank; Capacity: 1,400 Litres - Hydraulic Powered Agitator - Baffle Plates inside the tank - 3" Inch Outlet to Slurry Pump - Grid on tank top for cement dispersion during mixing - Sandblasted and painted with 2 pack paint Poly Reel; Capacity: 600 metres - 40 mm PN16 SDR11 Poly Pipe, Blue Stripe, 3.7 mm Wall - Fabricated construction approx. 2.1 metres diameter - Hydraulic Drive via reduction gearbox and chain + sprocket final drive - Adjustable Speed Control: 1.5-30 m/min Control Platform; - Mounted near mixing tank - Engine controls, start, stop, throttle, etc. - Hydraulic controls for agitator, slurry pump and hose reel Dimensions; Length: 4.65 m Width: 2.35 m Hight: 2.5 m Weight: 3,500 kg approx. Skid Mounted Grouting Unit Location: Australia Learn More

Model: WP500 Engine: Cummins QSB 4.5 @ 119 kW (160 HP) Fuel Tank Capacity: 200 Litres Estimated Weight: 2,890 kg (excluding trailer) - Base Frame to support engine, pumps, hydraulics and fuel tanks, etc. - Paint, Two Pack Evolution Yellow Hydraulics; - Pump Group Bosch Rexroth - A11VO95/A10VO85/16 - Maximum Circuit Pressure: 250 Bar - Hydraulic Oil Capacity: 400 Litres - Return Filter: 10 Micron - Hydraulic Oil Cooler and Fan Water Pumps; Make: FMC Model: L11-18SC Water Flow Range: 0-530 lpm (140 US/GPM) Maximum Water Pressure: 69 Bar (1,000 PSI) - Adjustable Water Pressure Relief Valve - Water Discharge Pressure Gauge - Surge Chambers on suction & discharge - Discharge Pulsation Dampener - Volvo fixed displacement Piston Drive Motors - Flex Drive Couplings - 2" Inch Water Delivery Hose x 10 metres long Control Panel; - Remote Pilot Hydraulic Control to attach at Rig Control Panel - Selectable Pump 1, 2 or both - Adjustable Friction Lock Control - Selectable Fine Speed Control on Pump 1 - Interconnecting Hoses 10 metres long Skid Mounted Mud Pump Location: Australia Learn More

Includes; - Alfagomma Sample Hose - Spin Cage - Rod Slide - Offsiders Deck Drill Rig Cage & Platform Location: Queensland, Australia Learn More

Make: Iveco Model: Eurotech Year: 2000 KM's: 83,254 Type: 8x4 GVM: 31,000 kg Cab Chassis - 120 m of 4" Inch Metzke Drill Pipe - 2,000 Litre Double Bunded Diesel Tank - 9,000 Litre Water Tank - 12 V Diesel Transfer Pump - Diesel Pump Tools + More - Hose Reel Support Truck Location: Queensland, Australia Learn More

Make: Custom Model: 600 RRD Motor: 40 HP TEFC Pulling Capacity: 24,000 lbs Lifting Capacity: 24,000 lbs Down Thrust Capacity: 12,500 lbs Rotational Torque: 6,500 ft/lbs Load Sensing Power Limiting Pump: 45 GPM @ 1,700 PSI Load Sensing Diesel Pump: 15 GPM @ 3,500 PSI Fast Feed: 14.79 GPM @ 2,500 PSI Slow Feed: 6.2 GPM @ 2,500 PSI Traction Hydraulic Motor: 14 HP each at 4,000 MASL (Using Diesel Drive) Max. Drilling Air Pressure: 400 PSI Feed Cylinders Combined Bore: 9.8 sq inch Features; - Lubricator - Water Pump - Robust Mine Proven Construction - High Torque Rotation Head - Reversable Heavy Duty Mast - Efficient Electric/Hydraulic Drive - Fully Hydraulic Operation - Compact Size - Fully Variable Rotation Speed (0-24 RPM) Hydraulically Operated Crawlers - Remotely Operated Hydraulic Console for flexibility - Sting Cylinder - Dual Heavy Duty Feed System - 90 Degree Tilt Out Rotation Head - Longitudinal Shift - Side Shift - NEMA 4 - Air Motors for travelling Track Mounted Drill Rig Location: Canada Learn More

*Each Sold Separately - Not as a Package* Two-Eye Hose Restraint - Wire: Galvanised - Ferrules: Aluminium - Thimbles: Stainless Steel - Leg Protection: Sprial Guards (Colour Coded) Galvanised Sizes - 6-14 mm to 260-300 mm Stainless Steel 316 Sizes - 6-14 mm to 260-300 mm Four-Eye Hose Restraint Galvanised Sizes: 0-1.0 m to >19.5-20.0 m Stainless Steel 316 Sizes: 0-1.0 m to >19.5-20.0 m Single Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Offset Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Twin Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Open Ended Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Lace-Up Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Safety Shackles Sizes: 0.75 t - 3.2 t Cambuckles / Hose Straps 25 mm Black Polyester Webbing (Plain) Sizes: 400 - 1,500 mm 25 mm FRAS Woven Webbing Sizes: 400 - 1,500 mm 25 mm FRAS Polyester Webbing (Jacquard) Sizes: 400 - 1,500 mm Various Sized Hose Restraints Cable Stocking Safety Shackles Cambuckles Hose Straps Location: Western Australia Learn More

Rig Make: UDR Model: 650 Year: 2007 - Fully Rebuilt June 2021 - Complete Service on Mercedes Truck before being parked - Complete Rewire & Control Panel for Sullair Compressor - Invoices and Documentation can be provided Includes; - 2006 Sullair 1,150 CFM / 350 PSI & 900 CFM / 500 PSI Air Compressor (Rebuilt & Installed Jan 2019) - 200x Metres of 4" Inch Remet Drill Rods (with Inner Tubes & Saver Subs) 80% New - 50x Metres of 4" Inch Remet Drill Rods + 3 1/2" Inch Gear (Blow Up Cap, Remet Tube Tester & 4" Inch Remet Box to 3 1/2" Inch Remet Pin Saver Subs) 100% New Rig Truck Make: Mercedes Benz Model: Actros 3244 Year: 2006 KM's: 52,228 Type: 8x4 Sea Container 2 - 20ft Powered - Cone Splitter - Set-up for 3 1/2" Inch Rod Handler Gear - Cage with Running Gear - 3x New Head Tubes - 3x New 4" Inch Rod Spanners - Spare Top Swivel - High Pressure Air Hoses 1 1/2" Inch - 2" Inch (some fully socked and variety of lengths) - Spare Wear Bend - 5x New Wear Blocks - Hydraulic Foot Clamps - Set - Spare Hose Cradle - Diamond Rod Cage - Extra UDR Consumables & Parts Sea Container 3 - 20ft - UDR Hammers and Bits - 4x 5" Inch HF 127 mm Bit - Extras - Bits/Subs/Tubes/Head Tubes - 4x RE542-RE543 Bit 127 mm 5" Inch HF - 2x New 543 Sandvik Hammers - 2x 543 Sandvik Hammers @ 60% - PR120 Hammer - 5x 111 mm 2-4.5" Inch New Remet Aircore Bits - 4x 111 mm 2-4.5" Inch Used Remet Aircore Bits - 5x Metzki Bits @ 50% - SR170 Hammer & 4 1/8" Inch TC Bit, Shroud & Inner Tube - 6" Inch Conventional Hammer with Bit Pallets Quantity: 4 - Spares Truck Mounted Drill Rig Package Location: Western Australia Learn More

Make: Almet Model: 238FF Quantity: 3 Rotary Side Swivels Location: Queensland, Australia Learn More