Search results for: 'hours for size in cherry high nj'

Rig Make: Edson Model: 350 Hours: 4,500 Air Compressor: Compair/Broomwade (Plate No: C20450/206) - 25x Rods @ 2,050 mm long - 1x with Downhole 75 mm Hammer attached - 2x 75 mm Button Bits for Hammer and numerous Drag Bits included - 3x Bog Mats for Stabiliser Legs - 2-3x Rods have worn threads that would need re-machining/built up Vehicle Make: Toyota Model: 75 Series Landcruiser Year: 1975 Vehicle Mounted Drill Rig Location: Victoria, Australia Learn More

Make: Caterpillar CAT Model: R1600H Year: 2017 Hours: 20,530 Engine: Caterpillar CAT C11 Acert Tier 2 EPA - Tyres with 60% of Life - Bucket in Good Condition LHD Wheel Loader Location: Peru Learn More

Make: Epiroc Model: Boomer 282S Year: 2016 Hours; Unit 1: 2,654 / Arm 1: 1,614 / Arm 2: 1,872 Unit 2: 2,453 / Arm 1: 1,992 / Arm 2: 2,207 Quantity: 2 Underground Double Arm Drill Rig Location: Chile Learn More

Make: Epiroc Model: Rocket Boomer 282 Year: 2017 Hours: 6,610 Percussion Hours: 3,009 / 2,987 Electric Hours: 3,601 / 4,113 Drill: COP 1838 HD+ - Double Arm - Fixed Beams of 16' Foot Drill Rig Location: Peru Learn More

Make: Epiroc Model: Boomer S1D Year: 2017 Hours: 3,171 / 315 (Percussion Hours) Engine: Deutz B4L914 @ 72.4 KW Rock Drill: Sandvik HLX5 Transmission: Rexroth A4VG56 Feed Beam: Adapted with Feed Chain - Electric Motor and Compressor - Electrical Cabinet (A10) - Electrical Collector - Cooler - Hydraulic Control Block - ROPS Operator Cabin Drill Rig Location: Chile Learn More

Make: Terex Model: Hi-Ranger TM105 Year: 2007 Hours: 1,026 / 711 (PTO) Working Height: 105' Foot / 32 Metre Side Reach: 51' Foot / 15.5 Metre - 66kV Insulated Boom - Flashing Beacons - In Date until 12/2030 *Truck Is Not Included* Elevating Work Platform Location: Western Australia Learn More

Make: Rockdrill Model: RD700 Hours: 33,037 - Mounted on Modified Caterpillar Log Skidder - Recently Replaced Skidder Turbo - Deutz 6 Cylinder Turbocharged Power Pack - 2x Brand New Hydraulic Pumps & 1x Used - Onboard Sullair 500 CFM / 350 PSI Air Compressor with Caterpillar CAT 3208 Engine (Hours: 4,924) - 150x Metres of RC Rods - 4x Hammers inc. 1x Open Water Bore Hammer and Blade Bits - Several Pallets of Spare Parts, Consumables, and Spare Tyre - Blade on Front for ease of Track/Pad Set Up - Hasn't been operated in 2 years but has since deteriorated a few hoses and ram seals from sitting - Emergency Stop System needs work - Started every 4 months to keep oil around internals but needs work before job - Not Registered Modified Log Skidder Drill Rig Location: Queensland, Australia Learn More

Rig Make: Reichdrill Model: T-100 Year: 1992 Hours: 3,567 Engine: Cummins (700 HP) Pull Up: 50 Tonne Pull Down: 20 Tonne Capacity: 1,200 m - Hydraulic Pipe Handler attached to Mast - 2 Speed Head - 140 RPM Max. Rotation - 132,000 lb Torque - Manual Slips w/ Dies to suit 2 3/8" Inch, 2 7/8" Inch & 3 1/2" Inch Pipe - Has sat for 3 years, need some refurbishment - Heavy Duty, Deep Water Rig Carrier Make: Custom Miles: 17,064 Engine: Cummins Crane Carrier Mounted Drill Rig Location: Queensland, Australia Learn More

Rig Make: EDM Model: 2000 Year: 2010 (2x) & 2012 Engine: Cummins QSM-11 Tier 3 Diesel Pullback: 40,000 Main Winch: 40,000 Max. Tophead Torque: 9,000 (800 Torque @ 1,500 RPM) - Set Up for Exploration Drilling (5-150 RPM Tophead in Low Gear) - Core Drilling Applications (150-1,500 RPM Tophead in High Gear) - No Air Compressor - No Mud Pump - FMC (Bean) Water Pump (140 l/min or 35 GPM) - Sliding Angle Mast (Up to 45 Degrees with 2,000 mm Mast Dump) - High Speed Wireline Winch for Coring - Hydraulic Rod Break Out - Rod Spinner with 11,000 Breakout Torque Quantity: 3 Approx. Drill Depths; Dual Tube RC Pipe: 350 m BQ Coring Pipe: 2,800 m NQ Coring Pipe: 2,000 m HQ Coring Pipe: 1,500 m PQ Coring Pipe: 1,100 m Rig Truck Make: International Model: 7601 (2010) / 7500 (2010) / 7600 (2012) Year: 2019 (2x) & 2012 Type: 8x4 Truck Mounted Drill Rig Location: Chile Learn More

Make: Wacker Neuson Model: TH412 Year: 2020 Hours: Less than 500 Engine: Yanmar 3TNV80FT @ 25HP Chassis Operating Pressure: 5,510 PSI / 380 bar Hydraulic Operating Pressure: 3,190 PSI / 220 bar Payload Max: 1,250 kg Payload Lift Max: 1,250 kg Lift Bucket Swivel: 4,537 mm Dimensions Length: 3,944 mm (2,991 mm w/out Bucket) Width: 1,564 mm Height: 5,280 mm (1,995 mm Just Cab) Weight: 2,750 kg - Forklift Attachment - Side Shift - Air Conditioning / Heating & Ventilation - ROPS / FOPS tested with VSG safety window on right side - Front, Roof & Rear Wipers - Heated Rear Window - Tilt Display - Sun Shade - Bottle Holder - Storage Net - LED Work Lights (1x Front & 1x On Cab Roof) Telehandler Location: Western Australia Learn More

Make: Exploration Drill Masters EDM Model: 95K Year: 2018 Hours: 32,431 Drill Head Hours: 32,431 Compressor Hours: 32,431 Onboard Air Pack: Sullair 1,150 CFM / 500 PSI Air Compressor - Spare Parts available (can provide a detailed list with pricing) - EDM MK2 Core Rod Feeder (For additional $USD350,000) Track Mounted Drill Rig Location: United States of America Learn More

Make: Geoprobe Model: 7822DT Year: 2025 Hours: 319 - Geoprobe GH63 Hammer - Tethered and Wireless Remote - 4 Speed Head (4,000 ft-lbf @ 750 RPM) - Dual Winch Kit - 3' Mast Extension - 7" Inch Breakout Kit - H Feed Control / CPT Valve Kit - 140 lbs Auto Drop Hammer - Anvil Hanger - ADH Drive Cap AWJ, Pin Down - 5' Extruder with Moyno 3L6 - Helper Side - 53" Inch Toolbox - Open Storage Box - Drop Rack System w/ Rod Rack - Yoke Vise & Mounting Bracket - High Speed Water Swivel w/ Float - Float Sub NWJ Pin Assembly Track Mounted Drill Rig Location: United States of America Learn More

Make: Schramm Model: AD400AC Year: 2012 Hours: 20,600 Mast Top Head Travel: 4.7 m Mast Slide (Dump): 2.38 m Pullback Capacity: 13,607 kg (30,000 lb) - Rod Loader with 120 Metre Capacity of 3.5" Inch x 3 Metre RC Rods - FMC EO413 Water Injection Pump (82 LPM @ 48 Bar / Max Pressure: 103 Bar) - Rotary Head (0-146 RPM / 6,022 Nm (4,442 ft lb) - 800 Litre Fuel Tank - 1,000 Litre Water Tank Refurbishments; - All Hydraulic Pumps fully reconditioned (Only have less than 4,000 hours) - Compressor fully reconditioned (Less than 4,000 hours) - Complete Mast changed (Less than 4,000 hours) - Engine & Hydraulic Cooler (Less than 4,000 hours) - CAT 3406 Engine (10,600 hours) Fully Reconditioned & In stock, can arrange to fit to rig for extra - Sullair Air Compressor 20/12 H 1,150 CFM / 1,800 RPM to 1,350 CFM / 1,800 RPM (Max Discharge Pressure: 500 PSI @ 1,150 CFM & 350 PSI @ 1,350 CFM) - Fully Reconditioned (Little less than 8,000 hours) Track Mounted Drill Rig Location: New Caledonia Learn More

Model: MI1 Year: 2024 Hours: 0 (Never Used - In Storage) - Designed for Ute or Trailer Quantity: 2 Auger / SPT Drill Rig Location: Victoria, Australia Learn More

Rig Make: Schramm Model: T685WS Year: 2007 Hours: 1,624 Engine: MTU 12V-2000 Pullback: 74,000 lbs Air Compressor: Sullair 1,350 CFM / 350 PSI to 1,150 CFM / 500 PSI - Winch - Hammer Lubricator - Water Injection with Soap Pump - Set Up for 25x Lengths of 4 1/2" Inch Drill Pipe - 6" Inch & 8" Inch Hammers - Diverters - Subs - Wrenches - Tooling, etc. Truck Make: Sterling Model: LT9500 Miles: 1,729 Truck Mounted Drill Rig Location: United States of America Learn More

Rig Make: Schramm Model: T555 Year: 2004 Hours: 10,445 Engine: Caterpillar C15 565 HP Diesel Torque: 75,348 lbs @ 0-131 RPM Pullback: 40,000 lbs Pulldown: 30,000 lbs Air Compressor: Sullair 1,050 CFM / 350 PSI - Engine Preheater - FMC Bean Water Injection Pump - Pipe Trough - 300 Feet of Drill Pipe - Stabiliser - DTH Hammer - Table Bushings Truck Make: Sterling Year: 2004 Miles: 29,972 Engine: Mercedes Benz 450 HP Diesel Truck Mounted Drill Rig Location: United States of America Learn More

Rig Make: Schramm Model: T660 Rotadrill Year: 1984 Hours: 4,131 Air Compressor: GHH 750 CFM / 250 PSI @ 2,100 RPM Deck Engine: Detroit 8V92 Diesel Winch Pullback: 44,000 lbs - Caterpillar Water Injection System - Set Up as Top Head Air Rotary - 7 Rod Carousel - Hammer Oiler Truck Make: Brigadier Engine: Caterpillar 3208 Miles: 41,546 Transmission: 13 Speed GVW: 53,320 lbs FVW: 15,320 lbs RVW: 38,000 lbs Drill Pipe; - 4 1/2" Inch - 220' Foot Bottle Neck Truck Mounted Drill Rig Location: United States of America Learn More

Make: Komatsu Model: D375A-6R Year: 2025 Hours: 0 - SU Blade - SS Ripper - ROPS - FOBS - Air Conditioned Cab Track Mounted Crawler Bulldozer Location: Egypt Learn More

Make: Compressor Systems Australia Pty Ltd (CSI) Year: 2012 Vessel Type: Vertical Gas Coalescer Vessel Designed Service: Coal Seam Gas (CSG) Design Code: AS 1210:2010 Hazard Level: B (AS 4343) Registered Design Number: Q26409 - Does NOT INCLUDE Control System Module or Wiring Mechanical (Each Vessel); Internal Volume: 460 L Orientation: Vertical Shell Material: AS1548 PT460NR Head Material: AS1548 PT460 Corrosion Allowance: 3 mm PWHT: Nil Weight; Empty: ~550 kg Full: ~850 kg Pressure & Temperature; Design Pressure: –101.3 kPa to 1,000 kPa Maximum Operating Pressure: 930 kPa Hydrostatic Test Pressure: 1,500 kPa Design Temperature: –10 °C to + 85 °C MDMT: –31 °C Maximum Operating Temperature: 50 °C Internals; - Replaceable coalescing filter elements (micron rating TBC) - Bottom liquid sump with drain connection - Top removable head for element access Total Installed Coalescing Volume: ~920 L Pressure Regulation; Make: Fisher (Emerson) Model: Big Joe® Type 630 Function: Downstream pressure control following coalescing Maximum Differential Pressure: 250 PSIG Casing Pressure: As per manufacturer nameplate Instrumentation; Level / Condensate Monitoring: Rosemount Transmitter Tag: BB76-LIT-700034B - Instrumentation associated with condensate collection and drain system - High-pressure rated instrument chamber Configuration & Key Features; - Parallel twin-vessel (A/B) arrangement - Individual isolation valves per coalescer - Common inlet and outlet headers Designed for: - High-availability CSG operations - Online maintenance - Reduced pressure drop - Protection of downstream compression, metering, and pipelines Asset Classification; Twin Coal Seam Gas (CSG) Coalescer Vessel and Pressure Regulation Skid AS 1210 Pressure Equipment – Hazard Level B Skid Assembly; Overall Dimensions (Approx.): 8.4 m (L) × 2.5 m (W) × 3.8 m (H) - Structural steel skid, gal with grated deck - Integrated access ladder and elevated maintenance platform - Painted carbon steel pipework - Outdoor-rated for field installation Twin Gas Coalescer & Pressure Regulation Skid Location: Queensland, Australia Learn More

Model: 600X Engine: John Deere Tier 4F - Stage V - Model: 4045CI550 @ 173 HP Pull Down Force: 7,000 kg Retract Force: 10,000 kg Feed Down Speed: 0-23 m/min Feed Retract Speed: 0-13.5 m/min Feed Stroke: 2.1 m Mast Dumping: 950 mm Rod Rack Capacity: 100 ft AWJ + 100 ft NQ Auger Rack Capacity: 50 ft of 3 1/4" Inch Hollowed Augers Features; - Engine Leveler - Engine Controller Unit - Pulling/Carrier Winch - 3x Night Lights - 2x Mud Pumps; Progressive Cavity Pump & Piston Pump - High Capacity Winch & Wireline Winch - Double Rod Clamp Breakout System - Automatic SPT Hammer - 16 Speed Rotation Head - Driller Platform - Toolbox Optional Features; - 4x Camera CCTV System - DSE Power Unit Parameters - Drilling Parameters - JD (John Deere) Link Track Mounted Multipurpose Hydraulic Drill Rig Location: United Arab Emirates Learn More