Search results for: 'metr hire for size by offers only'
- Did you mean
- metr hire for sale by offers only
- Related search terms
- hire for sale statesboro ga
- hire for sale in dual ray black
- hire for sale alpena corner
- hire for sale in johnson core tx
- hire for sale in dm ram bean
-
2012 Toyota SAS 32-8FG25 2.5 Tonne LPG Forklift ($12,000 ex GST) (sale-ehub4275)For Sale$12,000.00Make: Toyota SAS Model: 32-8FG25 Year: 2012 Hours: 8,878 Serial Number: 16862 Lift Height: 4 Metres Lift Capacity: 2,270 kg Fuel: LPG Weight: 3,760 kg Forklift Location: New South Wales, Australia Learn MoreMachine hours 8,878
KILOMETERS N/A YEAR 2012
BRAND Toyota
LOCATION New South Wales, Australia
MODEL 32-8FG25
-
Pullmaster PL2 Winch (Open to Offers) (sale-ehub4274)For Sale$0.00Make: Pullmaster Model: PL2 Winch Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Pull Master
LOCATION Queensland, Australia
MODEL PL2
-
2019 Epiroc SpeedROC 3F Surface Drill Rig Mounted on 2018 Doosan DX 210 W Carrier (POA) (sale-ehub4270)For Sale$0.00Rig Make: Epiroc Model: SpeedROC 3F Year: 2019 Hole Diameter: 28 mm - 45 mm Max. Hole Depth: 9 Metre Air Capacity (FAD): 42.5 l/s Pressure: 8 Bar Rock Drill / DTH Hammer Size: COP DS5 Drilling Method: Tophammer Carrier Make: Doosan Model: DX 210 W Year: 2018 Hours: 1,600 Carrier Mounted Surface Drill Rig Location: Germany Learn MoreMachine hours 1,600
KILOMETERS N/A YEAR 2019
BRAND Epiroc
LOCATION Germany
MODEL SpeedROC 3F
-
13.5" Inch 6 3/8" Inch API Reg Pin DHH Hammer ($16,500 ex GST) (sale-ehub4266)For Sale$16,500.00Model: DHH Size: 13.5" Inch - 6 3/8" Inch API Reg Pin - Drilled Rock for Approx. 30 Metres / Total Drilling 90 Metres - Has been standing upright for some time and oiled on occasion Hammer Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL 13.5" Inch DHH
-
2020 Atlas Copco E-Air V1100 VSD Skid Mounted Air Compressor (FOR HIRE/RENT - POA) (hire-ehub4266)For HireMake: Atlas Copco Model: E-Air V1100 VSD Year: 2020 Hours: 2,405 Skid Mounted Air Compressor Location: Queensland, Australia Learn MoreMachine hours 2,405
KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION Queensland, Australia
MODEL E-Air V1100 VSD
-
DE881 Drill Rig (POA) (sale-ehub4263)For Sale$0.00Make/Model: DE881 Engine: Cummins QSL9 Inline 6 Cylinder Tier 3 Depth Capacity (Coring): 2,223 m (7,291 ft) N Size Depth Capacity (Reverse Circulation): 450 m (1,470 ft) in Size Feed Force: 11.4 Tonne (25,350 lbf) Pull Force: 23 Tonne (50,700 lbf) Feed Length (Stroke): 7.32 m Speed Up: 65.4 m/min Speed Down: 49 m/min Features; - DA555 Diamond/RC Rod Handler - Hands Free Breakout Tool - FOPS Fitted over the Control Panel - Jaws for N, H & P Size Rod Handler and Rod Clamps - Starter Rods included for N, H & P Sizes - Rotating Rod Guard with Interlock - Front Mount Diesel Engine - Sophisticated Microfeed System - Water/Mud Pump - Water Swivel - Acoustic Enclosure on Engine - Powerful Top Drive Rotation Unit - Self-Energizing Rod Clamp - 1x Rod Clamp to support B, N, H, P & S Rod Sizes; 44.5 to 177.8 mm - Auxiliary Hydraulic Outlets - Multiple Guarding - Onboard Rod Storage - Remote Wedge Interlock Kit - Deck Mounted Wireline Winch - Wireline Counter / Cleaner / Overrun Cut Out - Left-Hand Hydraulic Operated Walkway with Stairs - Fluid Catch Tray (Under Engine) - High Pressure Filter Kit - Hose Sleeving on High Risk Hoses - Airline Oiler + Options Drill Rig Location: TBA (New Build - Built to Order) Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION TBA
MODEL DE881
-
DE712 Track Mounted Drill Rig (POA) (sale-ehub4262)For Sale$0.00Make/Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Features; - Radio Remote Tramming with No Driver Compartment - FOPS Fitted over Control Panel - Rotating Rod Guard with Interlock - "P" Size Rotation Unit with Chuck Drive and Hollow Spindle - Stepless Rotation Speed Control - Pilot Hydraulic Controls - Self-Propelled Drill Unit - 1x Rod Clamp to support B, N, H, P & S Rod Sizes; 44.5 to 177.8 mm - Fits in a high cube 40' Foot closed Shipping Container - Hydraulically Operated Left-Hand and Right-Hand Walkways - Tier 3 or Stage 5 / Tier 4 Diesel Engine Models Available - Wireline Spooler - Fire Suppression System - Main Winch Travel Limiter - Safety Spin capable of making up and breaking out of Rod Joints during tripping operations + Options Track Mounted Drill Rig Location: TBA (New Build - Built to Order) Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION TBA
MODEL DE712
-
2023 Black Diamond HJGW400 Track Mounted Geothermal Drill Rig (FOR HIRE/RENT - POA) (hire-ehub4258)For HireMake: Black Diamond Model: HJGW400 Year: 2023 Hours: 260 Engine: Cummins 4BTA Bean Pump: AD413, Max PSI: 550, Max RPM: 500, KW: 2.4, KPA: 3,792, HP: 3.2, GPM: 9, LPM: 34 Rod Bin: 80 m Mayhew Jr 3M Rods (Near New) Capability: 200M with 6” Hammer Hole Diameter: 110 - 305 mm Max Drilling Depth: 400 m Rotation Torque: 3,500 Nm Rotation Speed: 0-200 RPM Feeding Capacity: 100 Kn Feed Stroke: 200 Kn Drill Rod Length: 6 m Travel Speed: 2.5 km/h Dimensions (L x W x H - Transportation): 6,700 mm x 1,800 mm x 2,650 mm Dimensions (Working): 4,350 mm x 2,850 mm x 7,320 mm Weight: 9.5 Tonne Track Mounted Geothermal Drill Rig Location: Queensland, Australia Learn MoreMachine hours 260
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL Black Diamond HJGW400
-
FMC L1122D Hydraulic Skid Mounted Mud Pump (FOR HIRE/RENT - POA) (hire-ehub4250)For HireMake: FMC Model: L1122D Engine: Yanmar 4TNV Rated Pressure: 1,000 PSI Design Flowrate: 50 US GPM - Linde Hydraulic Pump (Coupled to the Diesel via Adaptor) - Linde Hydraulic Motor (Driving FMC Pump) - Flexible coupling between Pump and Hydraulic Motor (Comes with Guard) - Oil Cooler (Comes with Cooling Oil Tank) - Boart Longyear Pressure Relief Valve (Adjustable) - Rated up to 1,100 PSI - Hydac 1 Litre Bladder Accumulator - Maquarrie Control Panel - Structural Steel Base with Lifting Eyes - Battery Skid Mounted Mud Pump Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND FMC
LOCATION New South Wales, Australia
MODEL L1122D
-
DHD380 / T45 / T51 Hammer Rock Drill Bits (POA) (sale-ehub4248)For Sale$0.00Drill Bits; Model: DHD380 Size: 8" Inch / 9" Inch / 10" Inch - T45 & T51 - 85 mm to 135 mm - Includes some Shank Adaptors and Couplings, etc. Quantity: Approx. 200 Shank Adaptors; Make: Sandvik Model: HL1000T45 / HL1000T51 - Third Shank but size unknown; 3" Inch Blast Hole Bits Hammer Rock Drill Bits Location: Northern Territory, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Northern Territory, Australia
MODEL DHD380
-
1994 Edson CP-Tiga Series Drill Rig Mounted on 2000 Toyota Landcruiser 79 Series Ute ($55,000 ex GST) (sale-ehub4246)For Sale$55,000.00Rig Make: Edson Model: CP-Tiga Series Year: 1994 - Repair History since 2021 available - Off Road from November 2022 to October 2025 for repairs (Rear Diff) - Serviced and Ready - Aluminium Traction Tracks/Ramps - Mounted Auger & Drill Bit - Spare Auger Extensions (Plain) - 1x 1.5 Metre Concrete Cutting Drill Bit - 1x 1.0 Metre Concrete Cutting Drill Bit - Rock Drilling Bit - Soil Sampler - Other Spare Parts & Fittings Vehicle Make: Toyota Landcruiser Model: 79 Series Year: 2000 KM's: 443,920 - Spare Tyre - Spare Brake Drums (Need to be machined) Ute Mounted Drill Rig Location: Victoria, Australia Learn MoreMachine hours N/A KILOMETERS 443,920
YEAR 1994
BRAND Edson
LOCATION Victoria, Australia
MODEL CP-Tiga Series
-
45x 4.5" Inch 2 7/8" Inch IF Thread Drill Pipe & Hammer Package ($60,500 ex GST) (sale-ehub4245)For Sale$60,500.00Hammers; 1x Halco 8" Inch Hammer - Running 8" Inch Bits - 1x Used & 1x New 1x Halco 8" Inch Hammer - With Integral Spiral Stabiliser to give 10" Inch OD - Running 10" Inch Bits with Retention; 2x Used - Good Condition & 1x Brand New Drill Pipe; Length: 4.5" Inch Type: 2 7/8" Inch IF Threads - Most Near New - Done 6x Bores (All less than 100 Metres) - Cleaned & Greased - Fitted with Thread Caps & Plugs Drill Pipe & Hammers Package Location: South Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION South Australia
MODEL See Description
-
2007 UDR300 Drill Rig (Open to Offers) (sale-ehub4232)For Sale$0.00Make: UDR Model: 300 Year: 2007 Drill Rig Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2007
BRAND UDR
LOCATION Western Australia
MODEL 300
-
2022 DAC150 Track Mounted Drill Rig ($845,000 ex GST) (sale-ehub4224)For Sale$845,000.00Model: DAC150 Year: 2022 Hours: 1,211 Engine: Caterpillar CAT 3406 Track Base: Morooka 2500 (Stripped & Rebuilt - Subframe and Chassis extended and Track Frame moved central to machine) - Tilt/Dump Rod Bin (Holds 40x 3 Metre Rods - 120 Metres) - Sullair 1150/350 Air Compressor - Airdrill Rotation Head - Bottom Mount Air Swivel - Automatic Blow Down - Sand Cyclone with Revolving Splitter - RC Cyclone with Cone Splitter - Hydraulic Fold Down Walkway with Pull Out Ladder - Pedal Operated Air Spanner - Hydraulic Breakouts Track Mounted Drill Rig Location: New South Wales, Australia Learn MoreMachine hours 1,211
KILOMETERS N/A YEAR N/A BRAND Home Made
LOCATION New South Wales, Australia
MODEL DAC150
-
2012 Refurbished Mobile Drill B37 Sonic + Conventional Track Mounted Drill Rig ($419,000 ex GST) (sale-ehub4223)For Sale$419,000.00Make: Mobile Drill Model: B37 Year: 2012 Refurbished Year: 2025 (Comprehensively Rebuilt & Upgraded) Hours: 1,830 Engine: John Deere 4045TF285 Diesel Engine @ 99 HP Feed Stroke: 4 Metres with 15,700 lb Retract Force Rod Pull: 6 Metres Haul/Wireline/Jib Winch: 8,500 lb Front Mounted Recovery Winch: 20,000 lb Track Base: Remote Controlled MT-20 with Engineered FOPS for operator safety Rebuild & Upgrade; - Traverse Assembly & Traverse Box replaced and upgraded - New Toa-Tone SP8000 Sonic Drill Head (Oscillation Head) - New Hydrovane Compressor - New Tracks for improved mobility and stability - Upgraded Spindle Attachment - Full Service Completed with regular servicing history maintained Includes; - Dump Mast - Triple Clamp with Make & Break - Auto SPT Hammer - Bean W1122D Pump - Caterpillar CAT 430 Injection Pump - 10 Speed Mobile Drill Head - 30 Metres Sonic Tooling (140 mm Casing / 115 m Barrel) - Spares + Consumables - Upgraded Sonic Tooling to Boart Longyear standard Track Mounted Sonic + Conventional Drill Rig Location: Queensland, Australia Learn MoreMachine hours 1,830
KILOMETERS N/A YEAR 2012
BRAND Mobile Drill
LOCATION Queensland, Australia
MODEL B37
-
Exploration Drill Masters EDM1500HP Heli-Portable Diamond Drill Rig (POA) (sale-ehub4207)For Sale$0.00Make: EDM Model: 1500 Hours: 4,161 Engine: 2x Cummins 4BTA 3.9 Engine Hours: 200 Capacity: NQ up to 1,500 metres deep - Rod Spinner with Hydraulic Cut-Out for Enhanced Safety - Wireline Spooler - Main and Wireline Winch overrides to prevent accidental pull-throughs Heli-Portable Diamond Drill Rig Location: Indonesia Learn MoreMachine hours 4,161
KILOMETERS N/A YEAR N/A BRAND EDM
LOCATION Indonesia
MODEL 1500
-
Weir MHD-100HV Highwall Pump Unit (FOR HIRE/RENT - POA) (hire-ehub4198)For HireMake: Weir Minerals Model: MHD-100HV Rated RPM: 186 kW @ 2,200 RPM Suction Diameter: 150 mm Discharge Diameter: 200 mm Suction Flange: 406 OD x 200 ID 8 Holes 21 Dia. On 356 PCD Discharge Flange: 368 OD x 150 ID 8 Holes 21 Dia. On 324 PCD - Hydraulic Powered Highwall Pump Unit Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL MHD-100HV
-
792 Metres of 6 Metre NQ Drill Pipe / Rods (Open to Offers) (sale-ehub4195)For Sale$0.00Type: NQ Quantity: 792 Metres Length: 6 Metres - 50% Life Left Drill Pipe / Rods Location: Northern Territory, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Northern Territory, Australia
MODEL NQ
-
Half Built Foremost Rod Handler (Open to Offers) (sale-ehub4186)For Sale$0.00Make: Foremost - Half Built - Rod Storage & Arms Rod Handler Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Foremost
LOCATION Western Australia
MODEL N/A
-
1997 Custom Made GT500 Hydraulic Driven Skid Mounted Grout Mixers & Hoppers (Open to Offers) (sale-ehub4174)For Sale$0.00Make: Custom Made Model: GT500 Year: 1997 Dimensions; Length: 2 Metres Width: 1.5 Metres Height: 1.2 Metres Weight: 680 kg each Bowl Capacity: 500 Litres each - Mazda Power Packs or larger most suitable for these mixers - Last Used approx. 2014 - Controlled Independently - Specifically designed to mix large volumes of High Early Strength Non-Shrink Grouts very quickly - Cycle times were designed to be less than eight minutes and continuously - Indeed full truckloads of fast setting grouts were mixed and placed using these machines in less than a shift - Mixers were commonly mounted and used from the back of our truck - There are two mixers; a left hand and a right hand - When used together the controls were in the centre between the mixers - When configured like this one operator would control both machines - One machine would be dumping while the other one was mixing - Output was continuous and in less than eight minutes per batch - Mixed grout was dumped into a hopper and taken to the site needed - Forklift Channels (Center Balanced) - Machine has mixed; Proprietary Cement Grouts, Non-Shrink Grouts, Small Aggregate Concrete, etc. - Hydraulic Driven Skid Mounted Grout Mixers & Hoppers Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 1997
BRAND Home Made
LOCATION Queensland, Australia
MODEL GT500
Filter