Search results for: 'ranger county rang estate for skid'
- Related search terms
- For the linear program Max 6A 7B s.t. 1A 2B ≤ 4 5A 3B ≤ 15 A, B ≥ 0 find the optimal solution using the gra
- skid we enabl rate in bits
- range county rent estate for sale
- skid we enabled rate in bits
- ranger county rent estate for sale
- 1997 Custom Made GT500 Hydraulic Driven Skid Mounted Grout Mixers & Hoppers (Open to Offers) (sale-ehub4174)For Sale$0.00Make: Custom Made Model: GT500 Year: 1997 Dimensions; Length: 2 Metres Width: 1.5 Metres Height: 1.2 Metres Weight: 680 kg each Bowl Capacity: 500 Litres each - Mazda Power Packs or larger most suitable for these mixers - Last Used approx. 2014 - Controlled Independently - Specifically designed to mix large volumes of High Early Strength Non-Shrink Grouts very quickly - Cycle times were designed to be less than eight minutes and continuously - Indeed full truckloads of fast setting grouts were mixed and placed using these machines in less than a shift - Mixers were commonly mounted and used from the back of our truck - There are two mixers; a left hand and a right hand - When used together the controls were in the centre between the mixers - When configured like this one operator would control both machines - One machine would be dumping while the other one was mixing - Output was continuous and in less than eight minutes per batch - Mixed grout was dumped into a hopper and taken to the site needed - Forklift Channels (Center Balanced) - Machine has mixed; Proprietary Cement Grouts, Non-Shrink Grouts, Small Aggregate Concrete, etc. - Hydraulic Driven Skid Mounted Grout Mixers & Hoppers Location: Queensland, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR 1997
BRAND Home Made
LOCATION Queensland, Australia
MODEL GT500
- 2x Skid Mounted HPU Hydraulic Power Units (Open to Offers) (sale-ehub4169)For Sale$0.00Unit #1 Make/Model: Custom Made Year: 1995 KM’s: 40,000 Power Pack Hours: 140 Engine: Mazda Diesel 4 Cylinder Dual Fixed Displacement Hydraulic Power Pack Dimensions; Length: 2.2 Metres Width: 1.1 Metres Height: 1.1 Metres Weight: 1,060 kg - Last Started July 2025 - No Batteries (24 Volt System) - Fixed Displacement Pump @ 32cc per rev with Working Pressure @ 2,500 PSI. - Fitted with a Piggy Back - Fixed Displacement Pump @ 11cc per rev with Working Pressure @ 2,500 PSI - All Safety Guards Available - Compliance Labelled - Gauges: Oil Pressure, Fuel Gauge, Hour Meter, Charge, Battery Isolation Lock Out, etc. - Emergency Stop Switch - Throttle - Key Start - Forklift Channels (Center Balanced) - Crane Lifting Eyes on Corners Unit #2 Make/Model: Custom Made Year: 1995 KM’s: Less than 40,000 Power Pack Hours: 51 Engine: Mazda Diesel 4 Cylinder Variable Displacement Hydraulic Power Pack Dimensions; Length: 2.2 Metres Width: 1.1 Metres Height: 1.1 Metres Weight: 1,060 kg - Last Started July 2025 - No Batteries (24 Volt System) - Fixed Displacement Pump @ 45cc per rev with Working Pressure @ 2,500 PSI. - All Safety Guards Available - Compliance Labelled - Gauges: Oil Pressure, Fuel Gauge, Hour Meter, Charge, Battery Isolation Lock Out, etc. - Emergency Stop Switch - Throttle - Key Start - Forklift Channels (Center Balanced) - Crane Lifting Eyes on Corners Quantity: 2 Skid Mounted Hydraulic Power Units Location: Queensland, Australia Learn More
Machine hours 140 / 51
KILOMETERS 40,000
YEAR 1995
BRAND N/A
LOCATION Queensland, Australia
MODEL HPU
- 2017 Brevini Skid Mounted Pump (Open to Offers) (sale-ehub4138)For Sale$0.00Make: Brevini Year: 2017 Hours: 0 (Complete Overhaul in June 2025) Weight: 1,650 kg - All Hydraulics and Electrics have been fully re-conditioned - 55kW Electric Motor driving a hydraulic pump, which in turn drives a reciprocating high pressure water pump with a maximum output of 90L/min of water at 180 Bar pressure. - The complete pump system has been designed to run continuously and all equipment is housed within a fully enclosed cover. - As the motor drives a hydraulic pump, the high pressure water output is fully adjustable while the motor runs at a constant speed, unlike a high pressure water pump that is direct driven by a fixed speed electric motor. Additionally, because the hydraulic circuit incorporates an unloader valve, it is possible to switch the high pressure water on and off without the need to stop the motor or bypass high pressure water into a holding tank. - The hydraulics system is of robust construction containing 300L of oil and an integrated oil cooler. - The system can also be used as a 55 kW hydraulic power pack. Skid Mounted Pump Location: Queensland, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR 2017
BRAND N/A
LOCATION Queensland, Australia
MODEL Brevini
- HT400 Skid Mounted Triplex Mud Pump (FOR HIRE/RENT - POA) (hire-ehub4124)For HireModel: HT400 Engine: Cummins Transmission: Alison Gearbox - Variable Speed - 450 to 500 GPM Skid Mounted Triplex Mud Pump Location: Queensland, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL HT400
- 2023 Elgi 900 CFM / 350 PSI Skid Mounted Air Compressor ($90,000 ex GST) (sale-ehub4121)For Sale$90,000.00Make: Elgi Year: 2023 Hours: 364 - Like New 900 CFM 350 PSI Skid Mounted Air Compressor Location: Queensland, Australia Learn More
Machine hours 364
KILOMETERS N/A YEAR N/A BRAND Elgi
LOCATION Queensland, Australia
MODEL 900 CFM / 350 PSI
- Ford Ranger Ute (POA) (sale-ehub4087)For Sale$0.00Make: Ford Model: Ranger KM's: 218,754 Ute Location: Queensland, Australia Learn More
Machine hours N/A KILOMETERS 218,754
YEAR N/A BRAND Ford
LOCATION Queensland, Australia
MODEL Ranger
- 2016 Ford Ranger Dual Cab Ute (POA) (sale-ehub4057)For Sale$0.00Make: Ford Model: Ranger Year: 2016 KM's: 198,349 GVM: 3,200 kg Dual Cab Ute Location: Queensland, Australia Learn More
Machine hours N/A KILOMETERS 198,349
YEAR 2016
BRAND Ford
LOCATION Queensland, Australia
MODEL Ranger
- Mosa DSP 400 YSX-PL Skid Mounted Welder (POA) (sale-ehub4055)For Sale$0.00Make: Mosa Model: DSP 400 YSX-PL Skid Mounted Welder Location: Queensland, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND MOSA
LOCATION Queensland, Australia
MODEL DSP 400 YSX-PL
- 2002 Ground Rebuild MAN F2000 Truck ($45,000 ex GST) (sale-ehub4049)For Sale$45,000.00Make: MAN Model: F2000 Year: 2002 - Resprayed - All New Interior - New 440 HP Engine & Road Ranger - New Brakes & Steering Arms - Bull Bar - Crates included are spares - mostly new and still in MAN packaging - 7 Metre Tray with Twist Locks - Complete Ground Rebuild Truck Location: Northern Territory, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR 2002
BRAND MAN
LOCATION Northern Territory, Australia
MODEL F2000
- Gertec IS-38-E Skid Mounted Grout Unit ($59,500 ex GST) (sale-ehub4046)For Sale$59,500.00Make: Gertec Model: IS-38-E Serial Number: 44390 Skid Mounted Grout Unit Location: Victoria, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Victoria, Australia
MODEL IS-38-E
- Brand New Gertec Skid Mounted Grout Unit ($107,500 ex GST) (sale-ehub4045)For Sale$107,500.00Make: Gertec - Brand New - Never Used Skid Mounted Grout Unit Location: Victoria, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Victoria, Australia
MODEL N/A
- 2009 Nissan Patrol DX GU MY08 4x4 Ute ($30,000) (sale-ehub4044)For Sale$30,000.00Make: Nissan Model: Patrol DX GU MY08 Year: 2009 KM's: 282,381 Transmission: 5 Speed Manual Type: 4x4 - New Engine at 241,000 km's - Clutch and Flywheel - 3" Inch Exhaust - Long Range Tank - Water Tank - 2x Spare Tyres - Full Mine Spec (inc. UHF, High Vis, etc.) Ute Location: Western Australia Learn More
Machine hours N/A KILOMETERS 282,381
YEAR 2009
BRAND Nissan
LOCATION Western Australia
MODEL Patrol DX GU MY08
- 2006 Caterpillar CAT C15 Skid Mounted Engine ($59,000 ex GST) (sale-ehub4016)For Sale$59,000.00Make: Caterpillar Model: C15 Year: 2006 Hours: 1,533 • 440 HP @ 2,100 RPM • 1482LB-FT @ 1,400 RPM • Air to Air intercooled • 12 Volt (We can covert to 24 Volt if required) • SAE #1 flywheel housing multi fit industrial flywheel. • If required, we can supply and install a Caterpillar Air Compressor to the motor which runs off the auxiliary drive. The motor has been removed from the unit and fully workshop inspected and run up under load on the Dyno, results are as follows: Workshop inspection: • Intake manifold clean. • Cylinder head and rocker gear clean, no moisture or sludge, tune ok. • Turbocharge in nice condition, no excessive shaft play. • Camshaft in nice condition, no pitting • Crankshaft in good condition (Standard) • Main bearings and Con rod bearings in good condition – minimal wear • Crankshaft end float within spec Load test Report • Oil pressure: Cold Idle 70psi / Cold Top Revs 85psi / Hot Idle 50psi / Hot Top Revs 75psi • Water temps: Top Radiator 92 degrees. Bottom Radiator 69 degrees. • Thermostat opened and engine recovered correctly. • Turbocharger boost: 23 PSI @ 2,100 RPM • Breathing/ Blow by: 20 mm @ idle 30 mm @ 1,200 RPM 50 mm @ 1,350 RPM. 120 mm @ 1,800 RPM. • Smoke condition: small amount of black on startup, none at idle and very small white under full load. Skid Mounted Engine Location: Queensland, Australia Learn More
Machine hours 1,400
KILOMETERS N/A YEAR 2006
BRAND Caterpillar CAT
LOCATION Queensland, Australia
MODEL C15
- Tulsa Triplex TT-560 Skid Mounted Triplex Mud Pump (POA) (sale-ehub3995)For Sale$0.00Make: Tulsa Triplex Model: TT-560 Engine: Caterpillar CAT C15 Skid Mounted Mud Pump Location: New Zealand Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New Zealand
MODEL TT-560
- Baoji Oilfield Machinery F-800 Skid Mounted Mud Pump (POA) (sale-ehub3993)For Sale$0.00Make: Baoji Oilfield Machinery Model: F-800 Skid Mounted Mud Pump Location: New Zealand Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New Zealand
MODEL F-800
- 2007 Atlas Copco RD20-III Carrier Mounted Drill Rig (POA) (sale-ehub3983)For Sale$0.00Make: Atlas Copco Model: RD20-III Year: 2007 Hours: 7,500 - In Good Working Order - Full Service Report Available This used 2007 RD20 Range III Atlas Copco Rig is a powerful and versatile drilling machine, ideal for a wide range of applications. Equipped with on IR 1,250 CFM / 350 PSI Air Compressor, this rig delivers exceptional performance and efficiency. Powered by a robust CAT C13 engine, the rig ensures smooth operation and ample power. The Cummins QSK19 deck engine further enhances its performance capabilities, delivering 755 HP for demanding drilling tasks. With a substantial pullback capacity of 120,000 lbs (54,446 kg), this rig can handle tough drilling conditions with ease. Mounted on a crane carrier truck, this RD20 III Atlas Copco Rig provides excellent mobility and stability. The rig has been meticulously maintained to ensure optimal condition and longevity. Its clean appearance reflects the owner’s commitment to proper care and maintenance. Carrier Mounted Drill Rig Location: New South Wales, Australia Learn More
Machine hours 7,500
KILOMETERS N/A YEAR 2007
BRAND Atlas Copco
LOCATION New South Wales, Australia
MODEL RD20-III
- 2022 Rebuilt SPM Weir TWS2250 Skid Mounted Jack Up Frac Mud Pump (FOR HIRE/RENT - POA) (hire-ehub3982)For Sale$0.00Make: SPM Weir Model: TWS2250 Year: 2022 (Reman Rebuild) Hours: Approx. 7,000 Engine: Caterpillar CAT C32 (Rated @ 1,350 HP) Transmission: Allison 8000 Series Auto (DP8962R) Dimensions; Length: 9,135 mm (Overall) Width: 2,505 mm Height: 2,615 mm (On Ground) Height: 4,280 mm (Raised) Weight: 20,000 kg - When raised has enough height for a trailer of 1,500 mm to drive underneath Skid Mounted Jack Up Frac Mud Pump Location: Queensland, Australia Learn More
Machine hours Approx. 7,000
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL SPM Weir TWS2250
- 2022 Rebuilt SPM Weir TWS2250 Skid Mounted Jack Up Frac Mud Pump (POA) (sale-ehub3982)For Sale$0.00Make: SPM Weir Model: TWS2250 Year: 2022 (Reman Rebuild) Hours: Approx. 7,000 Engine: Caterpillar CAT C32 (Rated @ 1,350 HP) Transmission: Allison 8000 Series Auto (DP8962R) Dimensions; Length: 9,135 mm (Overall) Width: 2,505 mm Height: 2,615 mm (On Ground) Height: 4,280 mm (Raised) Weight: 20,000 kg - When raised has enough height for a trailer of 1,500 mm to drive underneath Skid Mounted Jack Up Frac Mud Pump Location: Queensland, Australia Learn More
Machine hours Approx. 7,000
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL SPM Weir TWS2250
- Caterpillar CAT C11 Skid Mounted Engine with Integrated 800 Litre Diesel Tank ($39,500 ex GST) (sale-ehub3976)For Sale$39,500.00Make: Caterpillar Model: C11 Hours: 17,316 - With Integrated 800 Litre Diesel Tank - Dyno Test Results and ECM Available 350 HP 1,800-2,100 Complete Package with Control Panel and Starter and Alternator Dimensions; Length: Overall 250 cm (Take off 50 cm if you relocate Air Cleaner) Height to top of Valve Cover (Engine): 120 cm To top of Pre-Cleaner: 180cm To top of Muffler: 220 cm Width: 110 cm (Radiator) Skid Mounted Engine Location: Australia Learn More
Machine hours 17,316
KILOMETERS N/A YEAR N/A BRAND Caterpillar CAT
LOCATION Australia
MODEL C11
- 2016 Safe-T BHA STS R1 Skid Mounted Jack Up Drill Rod Sloop ($120,000 ex GST) (sale-ehub3973)For Sale$120,000.00Make: Safe-T Model: BHA STS R1 Year: 2016 - Surplus to requirements Skid Mounted Jack Up Drill Rod Sloop Location: Tasmania, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR 2016
BRAND N/A
LOCATION Tasmania, Australia
MODEL Safe-T BHA STS R1