Search results for: 'rent estate for size in menominee cooler mi'

Make: MPI Model: NF500 Year: 2024 Hours: 11 - Triplex - Oversize transmission cooler fitted to radiator support - All high pressure piping, Cameron Gauges, PRV’s, etc. have test certificates - Pulsation Dampener has design registration certificates - Transmission has lock indicators visible to the operator - Transmission has over temp alarms and lights, and “quick to neutral” to further protect the transmission - Dual post battery isolators and starter isolators - Test certificates and register for the hydraulic hosing for the self- loading legs Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn More

Make: MPI Model: NF500 Year: 2024 Hours: 26 - Triplex - Oversize transmission cooler fitted to radiator support - All high pressure piping, Cameron Gauges, PRV’s, etc. have test certificates - Pulsation Dampener has design registration certificates - Transmission has lock indicators visible to the operator - Transmission has over temp alarms and lights, and “quick to neutral” to further protect the transmission - Dual post battery isolators and starter isolators - Test certificates and register for the hydraulic hosing for the self- loading legs Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn More

Make: FMC Model: L1122D Engine: Yanmar 4TNV Rated Pressure: 1,000 PSI Design Flowrate: 50 US GPM - Linde Hydraulic Pump (Coupled to the Diesel via Adaptor) - Linde Hydraulic Motor (Driving FMC Pump) - Flexible coupling between Pump and Hydraulic Motor (Comes with Guard) - Oil Cooler (Comes with Cooling Oil Tank) - Boart Longyear Pressure Relief Valve (Adjustable) - Rated up to 1,100 PSI - Hydac 1 Litre Bladder Accumulator - Maquarrie Control Panel - Structural Steel Base with Lifting Eyes - Battery Skid Mounted Mud Pump Location: New South Wales, Australia Learn More

Make: FMC Model: L1122D Engine: Yanmar 4TNV Rated Pressure: 1,000 PSI Design Flowrate: 50 US GPM - Linde Hydraulic Pump (Coupled to the Diesel via Adaptor) - Linde Hydraulic Motor (Driving FMC Pump) - Flexible coupling between Pump and Hydraulic Motor (Comes with Guard) - Oil Cooler (Comes with Cooling Oil Tank) - Boart Longyear Pressure Relief Valve (Adjustable) - Rated up to 1,100 PSI - Hydac 1 Litre Bladder Accumulator - Maquarrie Control Panel - Structural Steel Base with Lifting Eyes - Battery Skid Mounted Mud Pump Location: New South Wales, Australia Learn More

Drill Bits; Model: DHD380 Size: 8" Inch / 9" Inch / 10" Inch - T45 & T51 - 85 mm to 135 mm - Includes some Shank Adaptors and Couplings, etc. Quantity: Approx. 200 Shank Adaptors; Make: Sandvik Model: HL1000T45 / HL1000T51 - Third Shank but size unknown; 3" Inch Blast Hole Bits Hammer Rock Drill Bits Location: Northern Territory, Australia Learn More

Year: 2007 V-Pack Cooler Location: Western Australia Learn More

Mud Cleaner/Shaker; Make: MI SWACO P/N: 9672370-07M S/N: 4500407M Desander; Make: MI SWACO P/N: 9672412 S/N: 21579M Desilter; Make: MI SWACO P/N: 9672456 S/N: 22634M Mud Cleaner/Shaker Desander Desilter Location: Queensland, Australia Learn More

Make: Weir Minerals Model: MHD-100HV Rated RPM: 186 kW @ 2,200 RPM Suction Diameter: 150 mm Discharge Diameter: 200 mm Suction Flange: 406 OD x 200 ID 8 Holes 21 Dia. On 356 PCD Discharge Flange: 368 OD x 150 ID 8 Holes 21 Dia. On 324 PCD - Hydraulic Powered Highwall Pump Unit Location: Western Australia Learn More

Make: Everdigm Model: Rocky B180 Bit Shank: N180 Shank Connection: API 8-5/8" Inch Reg. Pin Piston Stroke: 5.75" Inch Cylinder Bore: 12.28" Inch Hole Sizes: 18" Inch ~ 26" Inch Wrench Size: A/F 14" Inch - Brand New - Bailing Subs/Break Out Plate, etc. - Hammer forklift cradle included - 19” Hammer bit included (unused) RS Hammer Location: Queensland, Australia Learn More

Make: New Holland Model: B115B Backhoe Location: New South Wales, Australia Learn More

Make: Drill Techniques Model: GM-2GI Year: 2020 Height: 3.5 Metres Tare: 4,000 kg Hydraulic Jack Up Grout Unit Location: New South Wales, Australia Learn More

Capacity: 15,000 Litre Quantity: 15 Above Ground Waste Sumps / Tanks Location: New South Wales, Australia Learn More

Make: Brevini Year: 2017 Hours: 0 (Complete Overhaul in June 2025) Weight: 1,650 kg - All Hydraulics and Electrics have been fully re-conditioned - 55kW Electric Motor driving a hydraulic pump, which in turn drives a reciprocating high pressure water pump with a maximum output of 90L/min of water at 180 Bar pressure. - The complete pump system has been designed to run continuously and all equipment is housed within a fully enclosed cover. - As the motor drives a hydraulic pump, the high pressure water output is fully adjustable while the motor runs at a constant speed, unlike a high pressure water pump that is direct driven by a fixed speed electric motor. Additionally, because the hydraulic circuit incorporates an unloader valve, it is possible to switch the high pressure water on and off without the need to stop the motor or bypass high pressure water into a holding tank. - The hydraulics system is of robust construction containing 300L of oil and an integrated oil cooler. - The system can also be used as a 55 kW hydraulic power pack. Skid Mounted Pump Location: Queensland, Australia Learn More

Make: Remet Size: 4" Inch Length: 3 Metres Quantity: 54 - RC - With Inner Tubes Drill Pipe Location: Queensland, Australia Learn More

Make: Gardner Denver Model: SCH2500 Year: 1990 approx. Engine: Cummins 6 BTA 5.9 Serial Number: 2711468 - Includes Drill Rods and Sampling Equipment Complete Overhaul; - Hammer HPRI - New Head Injectors on Fuel Pump - Track and Final Drives - Oil Cooler Replaced with CAT Cooler and mounted on left hand side Hydratrack Track Mounted Blast Hole Drill Rig Location: Queensland, Australia Learn More

Sizes: 3" Inch / 4" Inch / 5" Inch Working Pressure: 2,500 PSI - Basic Hard Shut in Nitrile Bladder - Wireline Stripper - Hydraulic Activator - Hand Pump Activator - All Hoses Burst Protection or Fire Protected - Zone One Hoses are Coflexip and Armour Plated - Casing Adaptor to be purchased Annular Diverter Location: Queensland, Australia Learn More

- Fully Hydraulically Operated - No Electrics - Various API Screen Sizes available - 600 GPM Jack Up Rod Sloop Mounted Shale Shaker Location: Queensland, Australia Learn More

Model: HT400 Engine: Cummins Transmission: Alison Gearbox - Variable Speed - 450 to 500 GPM Skid Mounted Triplex Mud Pump Location: Queensland, Australia Learn More

Rig Make: Mayhew Model: 1000 Hours: 16,000 Rig Truck Make: Mack Model: Quantum Year: 2005 KM's: 750,000 Includes; - Onboard Sullair 350/750 Air Compressor (Low Hour) - Onboard 5/4 Mud Pump - 4 Pot Bean Pump - GD 2000 Table - Mayhew 1000 Draw Works - 4 Long Stroke Jacks - All Powered off Truck Engine - All Variable Speed Hydraulic Drive - Isolators - Mine Spec - Excellent Tyres - Air Conditioning - 2 UHF Radio - Jump Start - E Stop - Isolators - Plastic Rollover Guards - Good Rubber Skirting Under Table - 2 Tool Boxes - Fire Extinguisher - All service records available - Rig has had extensive rebuilds every second year Support Truck Make: Volvo Model: FL10 Year: 1995 Includes; - Holds 6,500 L of Water - Jump Start, E Stop, Isolators - Ample Toolboxes, Storage - Slide Out Safety Rails - Storage on Top of Water Tank - Spare Tyre Tracks - All New Paint - New Drive Tyres, Steer Good Tyres - Certified ROPS - Air Conditioning - UHF Radios - Fire Extinguisher - Hydraulic Water Pump - Can hold 90 m 5" Inch PVC & Plenty of Rods Compressor Make: Sullair Model: 350/1100 or 500/900 Year: 2006 Hours: 2,000 - Computerised CAT C15 Manual Sullair Control System - Split Intercooler & Compressor Oil Cooler Mounting - Cabinet Braces - Receiver Bracing - Remote E Stop - Jump Start Receptacle - Isolators, Mine Spec - Connected to 4,000 L Diesel Fuel Tank underneath (Can pump diesel out of bulk tank) Truck Mounted Drill Rig & Support Truck Package Location: Queensland, Australia Learn More

Make: Caterpillar Model: 3406E 550 HP Engine Number: 5EK70781 Arrangement Number: 1285403 - Removed from a 1991 Kenworth T900 Truck (Done approx. 25,000 km - Diagnosed radiator was too small in the truck for a 3x trailer road train assembly) - Number 1 Cylinder has nipped up and an insurance claim was carried out by a mechanic and an exchange of a C15 fitted to truck, engine still turns over - New Cylinder Head, Injectors, and Rocker Gear with New Top and Bottom Engine Harnesses - New Exhaust Manifold, Turbo, Water Pump, Oil Cooler & Oil Squirters - New Pistons, Liners & Rods are all IPD Parts Engine Location: Northern Territory, Australia Learn More