Search results for: 'wheel to loader for rang for spare'

Make: AFHTechFLOW Package Type: Gas Heating & Pressure Regulating Skid Application: Fuel gas conditioning for gas engine / generator Year: October 2014 Fluid: Natural Gas / Fuel Gas Typical End Use: GE Jenbacher Gas Generator Fuel Gas Train Electrical Supply: 415 V, 3-phase, 50 Hz Heater Power Load: ~11 kW Gas Inlet Connection: Flanged pipeline inlet Gas Outlet Connection: Flanged connection to engine gas train Drains: Heater vessel drain Relief: PSVs vented to atmosphere Earthing: Dedicated skid earth lug Nominal Gas Flow: 330 Nm³/hr Maximum Flow Rate: 330 Nm³/hr Inlet Pressure (Operating): 35 – 90 barg Inlet Pressure (Design / MAOP): 102 barg (upstream of regulator PRV2301) Outlet Pressure (Operating): 4 barg Inlet Temperature: 2 – 60 °C Outlet Temperature: 0 – 40 °C Design Temperature Range: -15 to +60 °C Gas Quality Assumption: Pipeline Quality Natural Gas Gas Heating System; - Electric gas heater, 10.8 kW - Explosion-protected heater suitable for Zone 1 - Carbon steel pressure vessel heater housing - 100 NB, Class 600 - Designed to AS 1210 PT100 RTD temperature elements; - Element sheath over-temperature protection - Heater outlet temperature control Thyristor-controlled heater system; - Control panel supplied separately for non-hazardous area installation - Heater pressure safety relief valve Pressure Control & Safety; - Primary pressure regulator (carbon steel body) - Over-pressure shut-off valve with fracture disk - Pressure safety relief valve (PSV) - Pressure gauges with block and bleed valves - Manual isolation ball valves (Class 800) Gas Filtration & Separation; - Cyclone separator for liquid droplet removal - Particle filter rated >3 µm - Designed to prevent condensate and solids entering engine gas train Fuel Gas Conditioning Skid Location: Queensland, Australia Learn More

Make: Iveco Model: Acco 2350G Year: 1993 KM's: 221,000 Engine: Cummins 6 Cylinder Transmission: 9 Speed Road Ranger GVM: 35,000 kg - 12.00 R 20 Tyres - 90% Tyres All Round Plus Spares - 7.5 Metre Tray - 2,200 Litre Bunded Fuel Cell - 7,500 Litre Center Mount Water Tank - New Clutch Tray Truck Location: Western Australia Learn More

Make: Caterpillar Model: 994 Year: 1998 Hours: 17,577 Serial Number: 9YF00226 - Field Follow Unit for D Series Items Done to Machine; - Replaced Turbo and 1x Injector - Replaced Oil Coolers - Rebuilt Water Pump - Replaced All Wiring Harness KA21045 - Replaced Turbo - Rods & Main Bearings - Rebuilt Pump Drive & Replaced Engine Mounts - Installed New Mufflers & Repaired Starter Wheel Loader Location: United States of America Learn More

Drill Rig Make: UDR Model: 650 Year: 1996 Engine: Rebuilt 4 Cylinder Detroit - Rebuilt Drill Head - Main Ram Rebuilt - New Holdback and Microfeed Valves - New Cameron Gauge - New Main Winch Hydraulic Motor - New Secondary Valve Bank - Jack Legs Resealed and New Piston Seals - New Hydraulic Charge Pump - Hydraulic Pumps tested and making full pressure - Bean Pump Pistons just replaced - New Mast Slides - Outrigger Front Jack Legs - Spare Pulldown Ropes (New) - Rebushed Foot Clamps with New HQ and PQ Slips (NQ Slips included too) Truck Make: Mack Model: Quantum 435 HP Twin Steer Truck Mounted Drill Rig Location: New South Wales, Australia Learn More

Make: Allight Hours: 8,570 - Recent Paint Job - A Frame Supports Fitted - All New Tyres and Rims - Engine Mounts - Engine Service - Lights changed to LED - All Electrical Redone - Brakes checked and adjusted - Wheel Bearings serviced - Safety Stickers Fitted - Wheel Chocks - Isolator - E-Stop - Turn Key Portable Lighting Tower Location: New South Wales, Australia Learn More

Rig Make: Edson Model: CP-Tiga Series Year: 1994 - Repair History since 2021 available - Off Road from November 2022 to October 2025 for repairs (Rear Diff) - Serviced and Ready - Aluminium Traction Tracks/Ramps - Mounted Auger & Drill Bit - Spare Auger Extensions (Plain) - 1x 1.5 Metre Concrete Cutting Drill Bit - 1x 1.0 Metre Concrete Cutting Drill Bit - Rock Drilling Bit - Soil Sampler - Other Spare Parts & Fittings Vehicle Make: Toyota Landcruiser Model: 79 Series Year: 2000 KM's: 443,920 - Spare Tyre - Spare Brake Drums (Need to be machined) Ute Mounted Drill Rig Location: Victoria, Australia Learn More

Make: Mobile Drill Model: B37 Year: 2012 Refurbished Year: 2025 (Comprehensively Rebuilt & Upgraded) Hours: 1,830 Engine: John Deere 4045TF285 Diesel Engine @ 99 HP Feed Stroke: 4 Metres with 15,700 lb Retract Force Rod Pull: 6 Metres Haul/Wireline/Jib Winch: 8,500 lb Front Mounted Recovery Winch: 20,000 lb Track Base: Remote Controlled MT-20 with Engineered FOPS for operator safety Rebuild & Upgrade; - Traverse Assembly & Traverse Box replaced and upgraded - New Toa-Tone SP8000 Sonic Drill Head (Oscillation Head) - New Hydrovane Compressor - New Tracks for improved mobility and stability - Upgraded Spindle Attachment - Full Service Completed with regular servicing history maintained Includes; - Dump Mast - Triple Clamp with Make & Break - Auto SPT Hammer - Bean W1122D Pump - Caterpillar CAT 430 Injection Pump - 10 Speed Mobile Drill Head - 30 Metres Sonic Tooling (140 mm Casing / 115 m Barrel) - Spares + Consumables - Upgraded Sonic Tooling to Boart Longyear standard Track Mounted Sonic + Conventional Drill Rig Location: Queensland, Australia Learn More

Make: Caterpillar Model: 994F Year: 2007 Hours: 52,528 - Good Working Condition Wheel Loader Location: Peru Learn More

Make: Sandvik Model: LH202 Year: 2020 Hours: 487 - CE Machine - Very Good Condition - EPA Tier 4 Narrow Vein Loader Location: Sweden Learn More

Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - Warman Clamps - Under Casing Clamps - Wireline and Main Winch - Rod Bin - Auger Carrying Rack at Front of Rig - Auto SPT - Silvan Pump - Repair Kit for Silvan Pump - All New Suction and Hydraulic Hoses for Pump with Camlocks - 2x Mud Tanks (1,000 L & 500 L - Plastic) - 1x 7x5 Trailer with Fold Out Canopy + 12 Volt Fridge & Esky (In a locked container) - 2x Gas Bottles & Cookers (Mounted on Front of Trailer) - 2x 20 Litre Water Containers (Mounted on Front of Trailer) Down Hole Gear - 10x 3m PQ Rods Plus Shorts - 10x 3m HQ Rods Plus Shorts - 10x 3m NQ Rods Plus Shorts - 10x 3m Junior Mayhew Rods with Spanner Flats Plus 2x 1.5 m - 5x 100mm x 1.5m Augers Plus Bit & 20 Pins - 2x 1.5 NMLC Core Barrels - 6x NMLC Core Bits - 4x Impreg & 2x Surface Set - 40x Core Lifters / 6x Cases / 40x Stop Rings - 2x NMLC Reamers - 2x BQ Reamers - 3x BQ Core Bits - 2x 1.5m NQ3 Core Barrels - 2x Sets of Splits - 1x 3m NQ3 Core Barrel - 2x Locking Couplings - 2x Adaptor Couplings - Box of Barrel Spares - 1x HQ/NQ Overshot - 1x Set of PQ, HQ, NQ Inner Tube Wrenches - 10x 75mm Shelby Tubes Plus Drive Head - 10x 50mm Shelby Tubes Plus Drive Head - 2x SPT Samplers - 2x Pulling Plugs - 1x Spare Water Swivel Plus 2x Repair Kits - 1x Repair Kit for Rig Swivel - Many Subs to Facilitate all the Drilling Requirements - Stillsons - 2x 36" Inch, 2x 24" Inch & 2x 18" Inch - 1x Gas Mig Welder - 1x Honda 3.5 kVA Powered Generator - 1x PQ Birds Mouth for Water Return to Mud Tanks - 1x HQ Birds Mouth for Water Return to Mud Tanks - New Suction and Delivery Hoses - 1x 100mm Down Hole Hammer with 2x Bits 118mm *New* - 1x 75mm Down Hole Hammer with 2x Bits 95mm *New* - 2x 1.5m HQ3 Core Barrels - 2x 3m HQ3 Outer & Inner Splits - 1x 3m NQ3 Outer & Inner Splits - 4x HQ3 Core Bits - 20x HQ3 Core Lifters, Stop Rings & Cases Support Truck Make: Mitsubishi Model: Canter Year: 2009 Type: 4x4 - Hydraulic Hi-Ab Crane - 500 Litre Water Tank - 400 Litre Diesel Tank for Rig & 12 Volt Pump - 1x kVA Inverter - Wired so diesel pump won't engage until the switch is turned on in the locked tool box. - 1x Centrifugal Pump 1 1/2" Inch plus Suction and Delivery Hoses with Camlocks - 2x Tool Boxes - 1x Box of Hand Spanners & Sockets - Fitted Drill Rod Bins & Core Barrel Bins - Currently Registered until May 2025 Tracked Mounted Drill Rig Support Truck + Down Hole Gear Package Location: New South Wales, Australia Learn More

Air Core Drill Rig - New Comp Rotation Head - Deck Engine - Main Feed Ram - Radiator Hydraulic Pump - Tilting Rod Bin - Onboard Air Compressor Hours: 100 Approx. Compressor Capacity: 600 CFM / 230 PSI - Cradle for Cyclone Pump points for Booster Bean Pump - Dump Mast - Has been water boring for the last 5 years - Too many spares to list Truck Make: Hino Model: GT Year: 2014 KM's: 64,000 Type: 4x4 Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Make: G&K Model: 850 Engine: Caterpillar CAT 3208 (Rebuilt) Hours: 200 approx. - Replaced Extensive Hydraulic Hoses - Bean Pump on deck - 72 Metres of 4" Inch Waterbore Drill Pipe, comes with Head Tubes and Air Swivel Lots of Spares; - 2x Spare Heads -2x Spare Winches -1x Spare Wireline Drilling Capacity; 12" Inch Hole: Approx. 200 + Metres NQ: 800 Metres HQ: 600 Metres Truck Mounted Waterbore / Diamond Drill Rig Location: Victoria, Australia Learn More

Rig Make: Mayhew Model: 1000 Hours: 16,000 Rig Truck Make: Mack Model: Quantum Year: 2005 KM's: 750,000 Includes; - Onboard Sullair 350/750 Air Compressor (Low Hour) - Onboard 5/4 Mud Pump - 4 Pot Bean Pump - GD 2000 Table - Mayhew 1000 Draw Works - 4 Long Stroke Jacks - All Powered off Truck Engine - All Variable Speed Hydraulic Drive - Isolators - Mine Spec - Excellent Tyres - Air Conditioning - 2 UHF Radio - Jump Start - E Stop - Isolators - Plastic Rollover Guards - Good Rubber Skirting Under Table - 2 Tool Boxes - Fire Extinguisher - All service records available - Rig has had extensive rebuilds every second year Support Truck Make: Volvo Model: FL10 Year: 1995 Includes; - Holds 6,500 L of Water - Jump Start, E Stop, Isolators - Ample Toolboxes, Storage - Slide Out Safety Rails - Storage on Top of Water Tank - Spare Tyre Tracks - All New Paint - New Drive Tyres, Steer Good Tyres - Certified ROPS - Air Conditioning - UHF Radios - Fire Extinguisher - Hydraulic Water Pump - Can hold 90 m 5" Inch PVC & Plenty of Rods Compressor Make: Sullair Model: 350/1100 or 500/900 Year: 2006 Hours: 2,000 - Computerised CAT C15 Manual Sullair Control System - Split Intercooler & Compressor Oil Cooler Mounting - Cabinet Braces - Receiver Bracing - Remote E Stop - Jump Start Receptacle - Isolators, Mine Spec - Connected to 4,000 L Diesel Fuel Tank underneath (Can pump diesel out of bulk tank) Truck Mounted Drill Rig & Support Truck Package Location: Queensland, Australia Learn More

Make: Tracto Model: 18ACS Year: 2014 Hours: 2,992 - 9x Rod Boxes of TD82 Dirt - 12x Rod Boxes of D95 Rock Rods - 2x Rock Motors - Reamers Including Rock and Dirt - Cross Over from Tracto to API Reg Thread - Various Spare Parts - Breakout Tool Track Mounted Drill Rig Location: New South Wales, Australia Learn More

Make: MAN Model: F2000 Year: 2002 - Resprayed - All New Interior - New 440 HP Engine & Road Ranger - New Brakes & Steering Arms - Bull Bar - Crates included are spares - mostly new and still in MAN packaging - 7 Metre Tray with Twist Locks - Complete Ground Rebuild Truck Location: Northern Territory, Australia Learn More

Drill Rig Make: American Augers Model: DD140 Control Room Capacity: 20’ Foot Storeroom Capacity: 10’ Foot Genset Make: Kubota Model: GL9000D-AU-B Serial No: K10450 Capacity: 9kVA Control Room Trailer Make: Krueger Model: ST338 Year: 2008 ATM: 38 Tonne VIN: 6FH9079AB8M012264 - Trailer Pipe Handler Trailer Make: Gallagher Year: 2024 Max. Lifting Capacity: 1,100 kg - Purpose built Tandem Axle Trailer on airbag suspension with EBS braking - 4x Hydraulic Jack Legs - Self-Contained other than using the DD140 Auxiliary Hydraulics - Can present Horizontal Rod/Casing/BHA from a rod bench & install into the machine - Supplied with requested dies to suit rods, casing & BHA equipment - Full operational dash, with E-Stops on various positions - Complete working deck between the rig & road loader Including; - Rig Sub Base and Drill Floor Not Included; - Koomey Unit (in Photos) Track Mounted Drill Rig Package Location: Queensland, Australia Learn More

Rig Make: Boart Longyear Model: LS600 / BL600C Hours: 5,905 (New Engine Fitted in 2023 – Only a few hundred hours since) - 2x Boart Longyear BLY150 Reconditioned Sonic Heads (Ready to go and can be included) - Head Spares and some other big spares Support Unit Make: Morooka Hours: 423 Year: 2011 Track Mounted Multipurpose Sonic Drill Rig Support Unit Location: Scotland Learn More

Make: Nissan Model: Patrol DX GU MY08 Year: 2009 KM's: 282,381 Transmission: 5 Speed Manual Type: 4x4 - New Engine at 241,000 km's - Clutch and Flywheel - 3" Inch Exhaust - Long Range Tank - Water Tank - 2x Spare Tyres - Full Mine Spec (inc. UHF, High Vis, etc.) Ute Location: Western Australia Learn More

Make: Komatsu Model: WA 900-8 Year: 2020 Hours: 14,212 Wheel Loader Location: United States of America Learn More

Make: Atlas Copco Model: RD20-III Year: 2007 Hours: 7,500 - In Good Working Order - Full Service Report Available This used 2007 RD20 Range III Atlas Copco Rig is a powerful and versatile drilling machine, ideal for a wide range of applications. Equipped with on IR 1,250 CFM / 350 PSI Air Compressor, this rig delivers exceptional performance and efficiency. Powered by a robust CAT C13 engine, the rig ensures smooth operation and ample power. The Cummins QSK19 deck engine further enhances its performance capabilities, delivering 755 HP for demanding drilling tasks. With a substantial pullback capacity of 120,000 lbs (54,446 kg), this rig can handle tough drilling conditions with ease. Mounted on a crane carrier truck, this RD20 III Atlas Copco Rig provides excellent mobility and stability. The rig has been meticulously maintained to ensure optimal condition and longevity. Its clean appearance reflects the owner’s commitment to proper care and maintenance. Carrier Mounted Drill Rig Location: New South Wales, Australia Learn More