Search results for: 'wheel to loader for remot for spare'

Make: Geoprobe Model: 7822DT Year: 2025 Hours: 319 - Geoprobe GH63 Hammer - Tethered and Wireless Remote - 4 Speed Head (4,000 ft-lbf @ 750 RPM) - Dual Winch Kit - 3' Mast Extension - 7" Inch Breakout Kit - H Feed Control / CPT Valve Kit - 140 lbs Auto Drop Hammer - Anvil Hanger - ADH Drive Cap AWJ, Pin Down - 5' Extruder with Moyno 3L6 - Helper Side - 53" Inch Toolbox - Open Storage Box - Drop Rack System w/ Rod Rack - Yoke Vise & Mounting Bracket - High Speed Water Swivel w/ Float - Float Sub NWJ Pin Assembly Track Mounted Drill Rig Location: United States of America Learn More

Make: Schramm Model: AD400AC Year: 2012 Hours: 10,600 Mast Top Head Travel: 4.7 m Mast Slide (Dump): 2.38 m Pullback Capacity: 13,607 kg (30,000 lb) - Rod Loader with 120 Metre Capacity of 3.5" Inch x 3 Metre RC Rods (Rods Not Included) - FMC EO413 Water Injection Pump (82 LPM @ 48 Bar / Max Pressure: 103 Bar) - Rotary Head (0-146 RPM / 6,022 Nm (4,442 ft lb) - 800 Litre Fuel Tank - 1,000 Litre Water Tank Refurbishments; - All Hydraulic Pumps fully reconditioned (Only have less than 4,000 hours) - Compressor fully reconditioned (Less than 4,000 hours) - Complete Mast changed (Less than 4,000 hours) - Engine & Hydraulic Cooler (Less than 4,000 hours) - CAT 3406 Engine (10,600 hours) Fully Reconditioned & In stock, can arrange to fit to rig for extra - Sullair Air Compressor 20/12 H 1,150 CFM / 1,800 RPM to 1,350 CFM / 1,800 RPM (Max Discharge Pressure: 500 PSI @ 1,150 CFM & 350 PSI @ 1,350 CFM) - Fully Reconditioned (Little less than 8,000 hours) Track Mounted Drill Rig Location: New Caledonia Learn More

Make: Iveco Model: Acco 2350G Year: 1993 KM's: 221,000 Engine: Cummins 6 Cylinder Transmission: 9 Speed Road Ranger GVM: 35,000 kg - 12.00 R 20 Tyres - 90% Tyres All Round Plus Spares - 7.5 Metre Tray - 2,200 Litre Bunded Fuel Cell - 7,500 Litre Center Mount Water Tank - New Clutch Tray Truck Location: Western Australia Learn More

Make: Caterpillar Model: 994 Year: 1998 Hours: 17,577 Serial Number: 9YF00226 - Field Follow Unit for D Series Items Done to Machine; - Replaced Turbo and 1x Injector - Replaced Oil Coolers - Rebuilt Water Pump - Replaced All Wiring Harness KA21045 - Replaced Turbo - Rods & Main Bearings - Rebuilt Pump Drive & Replaced Engine Mounts - Installed New Mufflers & Repaired Starter Wheel Loader Location: United States of America Learn More

Drill Rig Make: UDR Model: 650 Year: 1996 Engine: Rebuilt 4 Cylinder Detroit - Rebuilt Drill Head - Main Ram Rebuilt - New Holdback and Microfeed Valves - New Cameron Gauge - New Main Winch Hydraulic Motor - New Secondary Valve Bank - Jack Legs Resealed and New Piston Seals - New Hydraulic Charge Pump - Hydraulic Pumps tested and making full pressure - Bean Pump Pistons just replaced - New Mast Slides - Outrigger Front Jack Legs - Spare Pulldown Ropes (New) - Rebushed Foot Clamps with New HQ and PQ Slips (NQ Slips included too) Truck Make: Mack Model: Quantum 435 HP Twin Steer Truck Mounted Drill Rig Location: New South Wales, Australia Learn More

Make/Model: DE881 Engine: Cummins QSL9 Inline 6 Cylinder Tier 3 Depth Capacity (Coring): 2,223 m (7,291 ft) N Size Depth Capacity (Reverse Circulation): 450 m (1,470 ft) in Size Feed Force: 11.4 Tonne (25,350 lbf) Pull Force: 23 Tonne (50,700 lbf) Feed Length (Stroke): 7.32 m Speed Up: 65.4 m/min Speed Down: 49 m/min Features; - DA555 Diamond/RC Rod Handler - Hands Free Breakout Tool - FOPS Fitted over the Control Panel - Jaws for N, H & P Size Rod Handler and Rod Clamps - Starter Rods included for N, H & P Sizes - Rotating Rod Guard with Interlock - Front Mount Diesel Engine - Sophisticated Microfeed System - Water/Mud Pump - Water Swivel - Acoustic Enclosure on Engine - Powerful Top Drive Rotation Unit - Self-Energizing Rod Clamp - 1x Rod Clamp to support B, N, H, P & S Rod Sizes; 44.5 to 177.8 mm - Auxiliary Hydraulic Outlets - Multiple Guarding - Onboard Rod Storage - Remote Wedge Interlock Kit - Deck Mounted Wireline Winch - Wireline Counter / Cleaner / Overrun Cut Out - Left-Hand Hydraulic Operated Walkway with Stairs - Fluid Catch Tray (Under Engine) - High Pressure Filter Kit - Hose Sleeving on High Risk Hoses - Airline Oiler + Options Drill Rig Location: TBA (New Build - Built to Order) Learn More

Make/Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Features; - Radio Remote Tramming with No Driver Compartment - FOPS Fitted over Control Panel - Rotating Rod Guard with Interlock - "P" Size Rotation Unit with Chuck Drive and Hollow Spindle - Stepless Rotation Speed Control - Pilot Hydraulic Controls - Self-Propelled Drill Unit - 1x Rod Clamp to support B, N, H, P & S Rod Sizes; 44.5 to 177.8 mm - Fits in a high cube 40' Foot closed Shipping Container - Hydraulically Operated Left-Hand and Right-Hand Walkways - Tier 3 or Stage 5 / Tier 4 Diesel Engine Models Available - Wireline Spooler - Fire Suppression System - Main Winch Travel Limiter - Safety Spin capable of making up and breaking out of Rod Joints during tripping operations + Options Track Mounted Drill Rig Location: TBA (New Build - Built to Order) Learn More

Make: Allight Hours: 8,570 - Recent Paint Job - A Frame Supports Fitted - All New Tyres and Rims - Engine Mounts - Engine Service - Lights changed to LED - All Electrical Redone - Brakes checked and adjusted - Wheel Bearings serviced - Safety Stickers Fitted - Wheel Chocks - Isolator - E-Stop - Turn Key Portable Lighting Tower Location: New South Wales, Australia Learn More

Rig Make: Edson Model: CP-Tiga Series Year: 1994 - Repair History since 2021 available - Off Road from November 2022 to October 2025 for repairs (Rear Diff) - Serviced and Ready - Aluminium Traction Tracks/Ramps - Mounted Auger & Drill Bit - Spare Auger Extensions (Plain) - 1x 1.5 Metre Concrete Cutting Drill Bit - 1x 1.0 Metre Concrete Cutting Drill Bit - Rock Drilling Bit - Soil Sampler - Other Spare Parts & Fittings Vehicle Make: Toyota Landcruiser Model: 79 Series Year: 2000 KM's: 443,920 - Spare Tyre - Spare Brake Drums (Need to be machined) Ute Mounted Drill Rig Location: Victoria, Australia Learn More

- 2x Jaw / Rod Booms - 1x Main Pivot Cylinder with Hydraulic Motor and Rod Knuckle Assy (No Motor) - 1x Rod Kicker - 1x Main Pivot Cylinder *New* - 1x Remote Control Unit *New* Rod Handler Parts Package Location: South Australia Learn More

Make: Mobile Drill Model: B37 Year: 2012 Refurbished Year: 2025 (Comprehensively Rebuilt & Upgraded) Hours: 1,830 Engine: John Deere 4045TF285 Diesel Engine @ 99 HP Feed Stroke: 4 Metres with 15,700 lb Retract Force Rod Pull: 6 Metres Haul/Wireline/Jib Winch: 8,500 lb Front Mounted Recovery Winch: 20,000 lb Track Base: Remote Controlled MT-20 with Engineered FOPS for operator safety Rebuild & Upgrade; - Traverse Assembly & Traverse Box replaced and upgraded - New Toa-Tone SP8000 Sonic Drill Head (Oscillation Head) - New Hydrovane Compressor - New Tracks for improved mobility and stability - Upgraded Spindle Attachment - Full Service Completed with regular servicing history maintained Includes; - Dump Mast - Triple Clamp with Make & Break - Auto SPT Hammer - Bean W1122D Pump - Caterpillar CAT 430 Injection Pump - 10 Speed Mobile Drill Head - 30 Metres Sonic Tooling (140 mm Casing / 115 m Barrel) - Spares + Consumables - Upgraded Sonic Tooling to Boart Longyear standard Track Mounted Sonic + Conventional Drill Rig Location: Queensland, Australia Learn More

Make: Caterpillar Model: 994F Year: 2007 Hours: 52,528 - Good Working Condition Wheel Loader Location: Peru Learn More

Make: Sandvik Model: LH202 Year: 2020 Hours: 487 - CE Machine - Very Good Condition - EPA Tier 4 Narrow Vein Loader Location: Sweden Learn More

Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - Warman Clamps - Under Casing Clamps - Wireline and Main Winch - Rod Bin - Auger Carrying Rack at Front of Rig - Auto SPT - Silvan Pump - Repair Kit for Silvan Pump - All New Suction and Hydraulic Hoses for Pump with Camlocks - 2x Mud Tanks (1,000 L & 500 L - Plastic) - 1x 7x5 Trailer with Fold Out Canopy + 12 Volt Fridge & Esky (In a locked container) - 2x Gas Bottles & Cookers (Mounted on Front of Trailer) - 2x 20 Litre Water Containers (Mounted on Front of Trailer) Down Hole Gear - 10x 3m PQ Rods Plus Shorts - 10x 3m HQ Rods Plus Shorts - 10x 3m NQ Rods Plus Shorts - 10x 3m Junior Mayhew Rods with Spanner Flats Plus 2x 1.5 m - 5x 100mm x 1.5m Augers Plus Bit & 20 Pins - 2x 1.5 NMLC Core Barrels - 6x NMLC Core Bits - 4x Impreg & 2x Surface Set - 40x Core Lifters / 6x Cases / 40x Stop Rings - 2x NMLC Reamers - 2x BQ Reamers - 3x BQ Core Bits - 2x 1.5m NQ3 Core Barrels - 2x Sets of Splits - 1x 3m NQ3 Core Barrel - 2x Locking Couplings - 2x Adaptor Couplings - Box of Barrel Spares - 1x HQ/NQ Overshot - 1x Set of PQ, HQ, NQ Inner Tube Wrenches - 10x 75mm Shelby Tubes Plus Drive Head - 10x 50mm Shelby Tubes Plus Drive Head - 2x SPT Samplers - 2x Pulling Plugs - 1x Spare Water Swivel Plus 2x Repair Kits - 1x Repair Kit for Rig Swivel - Many Subs to Facilitate all the Drilling Requirements - Stillsons - 2x 36" Inch, 2x 24" Inch & 2x 18" Inch - 1x Gas Mig Welder - 1x Honda 3.5 kVA Powered Generator - 1x PQ Birds Mouth for Water Return to Mud Tanks - 1x HQ Birds Mouth for Water Return to Mud Tanks - New Suction and Delivery Hoses - 1x 100mm Down Hole Hammer with 2x Bits 118mm *New* - 1x 75mm Down Hole Hammer with 2x Bits 95mm *New* - 2x 1.5m HQ3 Core Barrels - 2x 3m HQ3 Outer & Inner Splits - 1x 3m NQ3 Outer & Inner Splits - 4x HQ3 Core Bits - 20x HQ3 Core Lifters, Stop Rings & Cases Support Truck Make: Mitsubishi Model: Canter Year: 2009 Type: 4x4 - Hydraulic Hi-Ab Crane - 500 Litre Water Tank - 400 Litre Diesel Tank for Rig & 12 Volt Pump - 1x kVA Inverter - Wired so diesel pump won't engage until the switch is turned on in the locked tool box. - 1x Centrifugal Pump 1 1/2" Inch plus Suction and Delivery Hoses with Camlocks - 2x Tool Boxes - 1x Box of Hand Spanners & Sockets - Fitted Drill Rod Bins & Core Barrel Bins - Currently Registered until May 2025 Tracked Mounted Drill Rig Support Truck + Down Hole Gear Package Location: New South Wales, Australia Learn More

Air Core Drill Rig - New Comp Rotation Head - Deck Engine - Main Feed Ram - Radiator Hydraulic Pump - Tilting Rod Bin - Onboard Air Compressor Hours: 100 Approx. Compressor Capacity: 600 CFM / 230 PSI - Cradle for Cyclone Pump points for Booster Bean Pump - Dump Mast - Has been water boring for the last 5 years - Too many spares to list Truck Make: Hino Model: GT Year: 2014 KM's: 64,000 Type: 4x4 Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Make: G&K Model: 850 Engine: Caterpillar CAT 3208 (Rebuilt) Hours: 200 approx. - Replaced Extensive Hydraulic Hoses - Bean Pump on deck - 72 Metres of 4" Inch Waterbore Drill Pipe, comes with Head Tubes and Air Swivel Lots of Spares; - 2x Spare Heads -2x Spare Winches -1x Spare Wireline Drilling Capacity; 12" Inch Hole: Approx. 200 + Metres NQ: 800 Metres HQ: 600 Metres Truck Mounted Waterbore / Diamond Drill Rig Location: Victoria, Australia Learn More

Rig Make: Mayhew Model: 1000 Hours: 16,000 Rig Truck Make: Mack Model: Quantum Year: 2005 KM's: 750,000 Includes; - Onboard Sullair 350/750 Air Compressor (Low Hour) - Onboard 5/4 Mud Pump - 4 Pot Bean Pump - GD 2000 Table - Mayhew 1000 Draw Works - 4 Long Stroke Jacks - All Powered off Truck Engine - All Variable Speed Hydraulic Drive - Isolators - Mine Spec - Excellent Tyres - Air Conditioning - 2 UHF Radio - Jump Start - E Stop - Isolators - Plastic Rollover Guards - Good Rubber Skirting Under Table - 2 Tool Boxes - Fire Extinguisher - All service records available - Rig has had extensive rebuilds every second year Support Truck Make: Volvo Model: FL10 Year: 1995 Includes; - Holds 6,500 L of Water - Jump Start, E Stop, Isolators - Ample Toolboxes, Storage - Slide Out Safety Rails - Storage on Top of Water Tank - Spare Tyre Tracks - All New Paint - New Drive Tyres, Steer Good Tyres - Certified ROPS - Air Conditioning - UHF Radios - Fire Extinguisher - Hydraulic Water Pump - Can hold 90 m 5" Inch PVC & Plenty of Rods Compressor Make: Sullair Model: 350/1100 or 500/900 Year: 2006 Hours: 2,000 - Computerised CAT C15 Manual Sullair Control System - Split Intercooler & Compressor Oil Cooler Mounting - Cabinet Braces - Receiver Bracing - Remote E Stop - Jump Start Receptacle - Isolators, Mine Spec - Connected to 4,000 L Diesel Fuel Tank underneath (Can pump diesel out of bulk tank) Truck Mounted Drill Rig & Support Truck Package Location: Queensland, Australia Learn More

Make: Tracto Model: 18ACS Year: 2014 Hours: 2,992 - 9x Rod Boxes of TD82 Dirt - 12x Rod Boxes of D95 Rock Rods - 2x Rock Motors - Reamers Including Rock and Dirt - Cross Over from Tracto to API Reg Thread - Various Spare Parts - Breakout Tool Track Mounted Drill Rig Location: New South Wales, Australia Learn More

Make: MAN Model: F2000 Year: 2002 - Resprayed - All New Interior - New 440 HP Engine & Road Ranger - New Brakes & Steering Arms - Bull Bar - Crates included are spares - mostly new and still in MAN packaging - 7 Metre Tray with Twist Locks - Complete Ground Rebuild Truck Location: Northern Territory, Australia Learn More

Drill Rig Make: American Augers Model: DD140 Control Room Capacity: 20’ Foot Storeroom Capacity: 10’ Foot Genset Make: Kubota Model: GL9000D-AU-B Serial No: K10450 Capacity: 9kVA Control Room Trailer Make: Krueger Model: ST338 Year: 2008 ATM: 38 Tonne VIN: 6FH9079AB8M012264 - Trailer Pipe Handler Trailer Make: Gallagher Year: 2024 Max. Lifting Capacity: 1,100 kg - Purpose built Tandem Axle Trailer on airbag suspension with EBS braking - 4x Hydraulic Jack Legs - Self-Contained other than using the DD140 Auxiliary Hydraulics - Can present Horizontal Rod/Casing/BHA from a rod bench & install into the machine - Supplied with requested dies to suit rods, casing & BHA equipment - Full operational dash, with E-Stops on various positions - Complete working deck between the rig & road loader Including; - Rig Sub Base and Drill Floor Not Included; - Koomey Unit (in Photos) Track Mounted Drill Rig Package Location: Queensland, Australia Learn More