Search results for: 'forks ripper r pdc 2020 for side'

Make: Drill Techniques Model: GM-2GI Year: 2020 Height: 3.5 Metres Tare: 4,000 kg Hydraulic Jack Up Grout Unit Location: New South Wales, Australia Learn More

Make: Foremost Rod Handler Location: Queensland, Australia Learn More

Make: Gardner Denver Model: SCH2500 Year: 1990 approx. Engine: Cummins 6 BTA 5.9 Serial Number: 2711468 - Includes Drill Rods and Sampling Equipment Complete Overhaul; - Hammer HPRI - New Head Injectors on Fuel Pump - Track and Final Drives - Oil Cooler Replaced with CAT Cooler and mounted on left hand side Hydratrack Track Mounted Blast Hole Drill Rig Location: Queensland, Australia Learn More

Rig Make: UDR Model: 650 Onboard Compressor: Sullair 1,150 CFM / 350 PSI Air Compressor - Set up for Waterbores, RC and Aircore - Table opens up to allow 14” inch casing or bit - Recent major service of Air End, Separator Filter & New Oil - New Head Slides - New Jib Ram - New Pull Down Ropes - Head Serviced Includes; - Cyclone & Splitter - New Bull Hose - 25x Used 4” Inch RC Rods with Inner Tubes - 2x Head Tubes - Air RC Swivel - Mud Rotary Swivel - Hydraulic Breakout Arm - 4” Inch Airdrill RC Hammer (in Good Condition) & 2x Hammer Tubes - 7x 5” Inch Hammer Bits (Used) - 1x 4” Inch Back Hammer - 1x 8” Inch Aircore Bit - 4” Inch Aircore Bits (2x New & 3x Used) - Blow Up Sub - 1x 4 ½” Inch PDC Bit - 6” Inch Casing Elevator Set - Diverter Box with 20x Rubbers - Stuffing Box - Rod Spanner to suit - Dig Out Sub Rig Truck Make: Volvo Year: 2012 - Twin Steer Option 1 – Water Bore Drilling Equipment (Additional $15,400 ex GST) - 12” Inch Blade Bit (Near New) - 7 7/8” Inch Blade Bit - 8” Inch Tri-Cone Med Formation (Near New) - 6” Inch Shreps Hammer with 6” Inch & 8” Inch Bits (New) - Adaptor Subs to suit - Rod Spanners to suit - Casing Elevators Option 2 – RC Rods (Additional $55,000 ex GST) - 180 Metres of RC 4” Inch Remet Rod String (New) Option 3 – Hooklift Truck + Bins ($55,000 ex GST) Truck Make: Isuzu Year: 2000 - Hooklift Truck Bins; 1st Bin: 6x5 Gardner Denver Mud Pump with Perkins Engine 2nd Bin: To carry PVC and Gravel 3rd Bin: To carry Water Suttles Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Nissan Model: UG1F2A30U Year: 2013 Hours: 4,170 Capacity: 3 Tonne Lift Height: 4,500 mm Forklift Location: New South Wales, Australia Learn More

Make: Komatsu Model: D155AX-7 Year: 2014 Hours: 3,683 Engine: Komatsu SAA6D140E-6 @ 360 HP Horsepower: 360 HP Automatic Transmission: Komatsu TORQFLOW Max. Speed Forward: 11.6 km/h Max. Speed Reverse: 14 km/h Hydraulic System: CLSS Tare: 39,700 kg Shoe Width: 610 mm Blade Width: 4,060 mm - SS Ripper - Unique Torque Converter with Auto Lock-Up - EU Stage IIIB - Selectable Working Modes - Adjustable Eco-Gauge and Idle Caution Track Mounted Crawler Dozer Location: New Zealand Learn More

Make: Ford Model: Ranger KM's: 218,754 Ute Location: Queensland, Australia Learn More

Make: Exploration Drill Masters EDM Model: MKI Year: 2020 Hours: 502 Engine: Hatz 1B20V - All Haul and Drive Subs Included (HRQ, NRQ) Capacity; Max Load Capacity: 15,000 kg - Capacity for 2,000 Nm NQ Drill Pipe in 6 Metre Lengths Track Base; Make: Strickland Model: DT224E - Positioning Tracks Dimensions; Overall Platform Width: 2,460 mm Overall Platform Length: 7,466 mm Overall Height: 2,765 mm Empty Weight: 10,500 kg Clearance When Jacked Up: 1,650 mm Track Mounted Jack Up Rod Sloop Rod Feeder Location: Western Australia Learn More

Make: Ford Model: Ranger Year: 2016 KM's: 198,349 GVM: 3,200 kg Dual Cab Ute Location: Queensland, Australia Learn More

Make: Komatsu Model: WA 900-8 Year: 2020 Hours: 14,212 Wheel Loader Location: United States of America Learn More

Make: Caterpillar Model: D8T Year: 2009 & 2018 Hours; 2009: 10,723 2018: 15,100 - EPA Tier 3 (2009) / Tier 3 (2018) - MS Ripper (2009) - SS Ripper (2018) Track Mounted Bulldozer Location: Chile Learn More

Rig Model: TT300 Hours: 18 Engine: Deutz F6L912 / 66 kW Rated Depth Capacity: 300 m Feed Cylinder: 100 mm Barrel / 70 mm Shaft / 4 m Stroke Outrigger (Jacks): 4x Boxed Outriggers with 800 m Stroke Foam Pump: 21 Litre per min / 35 bar Foam/Water Tank: 120 Litre Axles: 2x 5 Tonne Air Braked Axles Tower: Direct on Cylinder / Triangle Shape Winch: 1 Tonne Push Down Force: 5,000 kgf @ 175 bar Pull Up Force: 13,000 kgf @ 175 bar Tilt Cylinders: 2x 80 Barrel 50 Shaft Breakout: 300 mm Stroke Cylinder Hydraulic Oil Tank Capacity: 330 Litres - Hydraulic Oil Cooler - Extended Tower to accommodate 4 m Stroke Cylinder - Spanners Included: 1x Breakout / 2x Keeper / 3x Hammer Modifications; - Hydraulically Tilt Rotary Head - Rotary changed to geared Rotary Head with Hollow Spindle (8,000 Nm Torque) - Including 2x Eaton Hydraulic Motors - Side Shift (on rotary head – opens up the tower for longer casing, etc.) Support Truck Make: Volvo Model: FH12 460 KM’s: 1,040,378 Type: 8x4 Air Compressor Make: Atlas Copco Model: XRV1200 Year: 2020 Hours: 122 Engine: Cummins Pressure: 22.7 bar / 330 PSI Engine/Motor Speed: 1,900 RPM Engine/Motor Power: 325 kW / 430 HP 1,200 CFM / 330 PSI - Included Drill Bits, Rods and Drilling Equipment Trailerised Drill Rig Support Truck Air Compressor Package Location: New Zealand Learn More

Mud Pump Make: Sandman Model: Mission Magnum Sandmaster 8x10x14 Year: 2017 Engine: Cummins 6 Cylinder Diesel w/ Clutch - 8 Valve Discharge Manifold on back - 2x 8 Valve Suction Manifold on each side - Flow Meter Trailer Year: 2012 - Pindle Hitch Dimensions; Width: 7.6' Length: 16' Tyres: 245/70R17.5" Trailerised Mud Pump Location: New Zealand Learn More

Rig Make: Gemco Model: H13 Engine: Ford Diesel 4 Cylinder Condition: Fair - 3 Metre Stroke - 7.5 Metre Mast - Water Injection Pump - New Hydraulic Pump - Couple of leaks at spool pack / leavers Truck Make: Isuzu Model: FTS Year: 1985 KM's: 168,000 Type: 4x4 Truck Mounted Drill Rig Location: New South Wales, Australia Learn More

Make: Atlas Copco Model: E-Air V1100 VSD Year: 2020 Hours: 2,405 Skid Mounted Air Compressor Location: Queensland, Australia Learn More

Make: Caterpillar Model: 16M Year: 2012 Hours: 10,192 Engine: Caterpillar CAT C13 Tyres: Michelin 23.5R25 - Cab A/C & Heater - Push Block - 16' Blade - MS Ripper - Mine Spec - EPA Tier 3 Motor Grader Location: Chile Learn More

Make: Caterpillar Model: D10T2 Year: 2020 Hours: 9,500 Includes; - SU Blade & Single Shank - Platforms & Walkways - Self-Closing Gates - Battery & Starter Isolation - Turbo blanket Isolators - Ground & Cab Mounted E-Stops - Fire Suppression - 2x 9kg Fire Extinguishers - Auto Grease System - Platform /Walkway - AM/FM Radio - UHF - Breath Safe - Fast Fuel Fit - LED work lights - Poly Sign Box - Reflective Tape - Caterpillar Fast Fuel System - Good A/C Track Mounted Bulldozer Location: Queensland, Australia Learn More

Size: 8 1/2" Inch - PDC Condition: Good Drill Bit Location: Western Australia Learn More

Size: 7" Inch - PDC Condition: Used Drill Bit Location: Western Australia Learn More

Rig Make: UDR Model: 650 Hours: 9,202 - Commissioned Mid 2023 - Onboard PTO Driven Air Compressor - New water pump - New fan belts - New radiator core - Recent service with oil & new filters - New rod & piston seals to main feed Ram - New Dump Mast Ram - New rods & seals to mast raise rams - New side shift ram - New break out ram - New rod crane raise ram - New hydraulic valve blocks in control cabinet for main pump & secondary pump controls - New micro control fine feed controller - Replaced majority of gauges with new - New main rotation shaft seals & speedy sleeves - New main rotation torque control cartridge - New hammer oiler pump - New seats & O rings in majority of valve banks Air Compressor - New Air / Oil separator filter - New Oil stop valve - New Castrol Aircoil 68 synthetic oil - New filters - Recently been serviced by Midcoast Compressors Truck Make: MAN Year: 1997 KM's: 200,000 Type: 8x8 Transmission: Recon 18 Speed Gear Box - Kevrek 1500 Hiab Crane with Winch & Umbilical Cord Remote - Radiator back flushed - New Water Pump - New Fan Belts - New brake boosters on every wheel - New four way valve - New valve on brake pedal - Rebuilt Truck Compressor - New air on drivers seat - New air valves on diff locks / cross locks - New clutch, fly wheel & pressure plate - New bearings & seals in Dana drive box - New oil pump on Dana drive box - New universals on tail shafts - New ram on power steering - New tyres all around - All ball joints on truck replaced that were needed, or new rubbers on them - Recently passed Pit Inspection - 7 months Rego as Plant - No need for overhang permits; within length Truck Mounted Drill Rig Location: New South Wales, Australia Learn More