Search results for: 'hire for site in johnson case tx'
- Related search terms
- hire for sale 1,350
- hire for sale 11234
- hire black yellow guppies for sale
- hire for sale 1100
- hire for sale 1000
- Dust Suppression (POA) (sale-ehub3874)For Sale$0.00Power (kW): 9-13, 30-50, 58-90, 150 Min. Flow (m3/hr): 1.5-6, 4.8-9, 8-15, 15-24 Throw (m): 30-50, 70-100, 120-150, 250 Oscillation (Deg): 0-360 Throw Angle (Deg): -5 to +45 - Stockpiles - Mine Blast Dust - Conveyor Discharge Chutes - Dust Hoppers - Crusher Machinery - Loading and Unloading Trucks - General Pollution - Airborne Dust - Construction Sites - Odor Control and Management Dust Suppression Location: Queensland, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
- DCS-S 4-4.7/8" Inch Drilling Collar Casing Slip Bowls (POA) (sale-ehub3795)For Sale$0.00Type: DCS-S 4-4.7/8" Inch - Comes with 1x Set of Inserts Drilling Collar Slips Casing Slip Bowls Location: Queensland, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL DCS-S 4-4.7/8" Inch
- Edson Versadrill 300 Drill Rig Mounted on Toyota Landcruiser Ute ($125,000 ex GST) (sale-ehub3781)For Sale$125,000.00Rig Make: Edson Model: Versadrill 300 Year: 1996 Engine: Hatze - 6x6 Multidrive Technology - Rotation head MR260 Rotation hollow spindle, single speed, dial in, rotation head around 120 rpm - Winching gear on back of mast for hollow augering - Can do diamond drilling if you were to change the hydraulic motor - Dump Mast - Near New Hydraulic Pump - 4x Leveling Jacks - Currently doing 80mtr holes at 4.5” - Client used to aircore with it, but currently set up doing mud - Used to do a lot of Geotech work, 6” hollow augering - Southern Cross Mud pump on the side - 3.2 mtr Stroke - 3 mtr Rods - Extension arm to run 6mtr casing into the ground Ute Make: Toyota Model: Landcruiser Year: 1990 KM's: 107,000 Ute Mounted Drill Rig Location: Western Australia Learn More
Machine hours N/A KILOMETERS 107,000
YEAR 1996
BRAND Edson
LOCATION Western Australia
MODEL Versadrill 300
- National Oilwell Varco NOV CRT350/500 FAC-Tool Casing Running Tool (POA) (sale-ehub3764)For Sale$0.00Make: National Oilwell Varco NOV Model: CRT350/500 FAC-Tool Casing Running Tool Location: Queensland, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND NOV
LOCATION Queensland, Australia
MODEL CRT350/500
- 45x 4" Inch 100 mm 6 Metre Schedule 4 304 Stainless Steel Casings (Open to Offers) (sale-ehub3708)For Sale$0.00Type: 4" Inch Length: 6 Metre - 100 mm - Schedule 4 - 304 Stainless Steel Casing Quantity: 45 Casing Location: Victoria, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Victoria, Australia
MODEL 4" Inch
- Kitchen, Lunch/Work Space Room + Storage Dual-Axle Van (FOR HIRE/RENT - POA) (hire-ehub3708)For HireIncludes; - Kitchen - Lunch Room / Work Space Room - Storage Dual-Axle Van Location: Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Australia
MODEL Dual Axle
- 2,500 Litre Mobile Keg Beer & Chill Cold Room Galvanised Trailer ($19,500 ex GST) (sale-ehub3698)For Sale$19,500.00Generator: Honda 2kVA Dimensions; Length: 4 Metres (Inc. Trailer) Width: 1.6 Metres Height: 2.5 Metres Cold Room: 1.2 m x 1.2 m x 1.8 m - Fully Insured & Ready to Go - Mobile- Galvanised Trailer - 2,500 Litre Cold Room - Holds 4x Kegs with 4x Taps (2 Either Side) - Drip Trays on Both Sides - Extra Cold Room Storage - Pull Out Shade Cloths on Both Sides - Party Hire - Camping - Beach Party (Trailer is Purpose Built) - Functions - Corporate - Event Management - Fundraisers Mobile Keg & Chill Cold Room Trailer Location: Queensland, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL 2,500 Litre Mobile Keg & Chill Cold Room Galvanised Trailer
- Kitchen, Lunch/Work Station Room + Generator & Bathroom Tri-Axle Van (FOR HIRE/RENT - POA) (hire-ehub3582)For HireIncludes; - Kitchen - Lunch Room / Work Station Room - Generator - 2x Toilets Tri-Axle Van Location: Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Australia
MODEL Tri-Axle
- 1981 Chicago Pneumatic CP650 Water Well Drill Rig Mounted on 6x4 Crane Carrier ($137,500 ex GST) (sale-ehub3581)For Sale$137,500.00Drill Rig Make: Chicago Pneumatic Model: CP650 Year: 1981 Engine: Caterpillar CAT 3406 Onboard Air Compressor: GHH 825 CFM / 350 PSI Twin Screw Injection Pump: Comet APS 71 ltr/min @ 580 PSI Casing Driver: 612 Banger 6" Inch - 12" Inch Winch: 1/2" Inch 7,000 lbs Extendable Rod Handling Jib Hole Capacity: 6" Inch - 12" Inch 500 m 4 1/2" Inch Rods Capacity; Pull Down: 21,000 lbs Pull Back: 55,000 lbs 5 1/2" Inch Heavy Hoist Rams 73 ft/min Rapid Feed - 160 Pitch Chains Levelling Jacks; Front: 1 x 5" Inch x 48" Inch Stroke Rear: 2 x 5" Inch x 36" Inch Stroke Top Drive Rotary; 0-152 RPM - 76,000 lb Torque Twin Dynex Motors R/C Head - 7 m Travel Carrier Type: 6x4 Engine: Caterpillar CAT 3208 @ 210 HP Crane Carrier Carrier Mounted Water Well Drill Rig Location: New Zealand Learn More
Machine hours N/A KILOMETERS N/A YEAR 1981
BRAND Chicago Pneumatic
LOCATION New Zealand
MODEL CP650
- Gardner Denver 8x5 Hydraulic Driven Trailer Mounted Mud Pump (FOR HIRE/RENT - POA) (hire-ehub3493)For HireMake: Gardner Denver Model: 8x5 - Hydraulic Driven Trailer Mounted Mud Pump Location: New South Wales, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND Gardner Denver
LOCATION New South Wales, Australia
MODEL 8x5
- Keypower 6V92TA1400 Skid Mounted Booster *Not Actual Photo of Unit* (FOR HIRE/RENT - POA) (hire-ehub3426)For HireMake: Keypower Model: 6V92TA1400 Max Inlet Pressure: 2,413 kPa / 350 PSI Max. Delivery: 660 l/sec / 1,400 CFM Max. Discharge Pressure: 5,171 / 850 PSI Compression Ratio: 2:1 (Nominal) / 3:1 (Maximum) Bore: 57 mm Stroke: 127 mm Max. Operating Angle: 15 degrees Engine: Detroit 6V92TA Diesel *Not Actual Photo of Unit* Skid Mounted Booster Location: New South Wales, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND Key Power
LOCATION New South Wales, Australia
MODEL 6V92TA1400
- Sullair 900 CFM / 350 PSI Air Compressor & Air Research 1809 Booster Mounted on Rod Sloop (FOR HIRE/RENT - POA) (hire-ehub3431)For HireCompressor Make: Sullair 900 CFM 350 PSI Booster Make: Air Research Model: 1809 - Mounted on Rod Sloop Location: New South Wales, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND Sullair
LOCATION New South Wales, Australia
MODEL 900 CFM / 350 PSI
- 2022 Atlas Copco X-Air 1,100 CFM / 380 PSI Portable Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3425)For HireMake: Atlas Copco Model: X-Air Year: 2022 Hours: 200 1,100 CFM 380 PSI Portable Air Compressor Location: New South Wales, Australia Learn More
Machine hours 200
KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION New South Wales, Australia
MODEL X-Air
- 2019 Atlas Copco DrillAir XRYS 1260 CD7 1,260 CFM / 550 PSI Skid Mounted Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3424)For HireMake: Atlas Copco Model: DrillAir XRYS 1260 CD7 Year: 2019 Hours: 2,000 1,260 CFM 550 PSI Skid Mounted Air Compressor Location: New South Wales, Australia Learn More
Machine hours 2,000
KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION New South Wales, Australia
MODEL DrillAir XRYS 1260 CD7
- Air Research ARC 1809/1310 1,800 CFM / 900 PSI Skid Mounted Booster (FOR HIRE/RENT - POA) (hire-ehub3423)For HireMake: Air Research ARC Model: 1809/1310 Hours: 900 Engine: Detroit 8V92TA Power: 210 HP Weight: 2,400 kg 1,800 CFM 900 PSI Dimensions Length: 1,900 mm Width: 1,500 mm Height: 2,050 mm Skid Mounted Booster Location: New South Wales, Australia Learn More
Machine hours 900
KILOMETERS N/A YEAR N/A BRAND Air Research
LOCATION New South Wales, Australia
MODEL 1809/1310
- 20 Tonne Payload Remote Control Track Mounted Carrier (FOR HIRE/RENT - POA) (hire-ehub3420)For HireTray Length: 12 m (Not Including Power Pack) Width: 3.2 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL N/A
- 20 Tonne Payload Remote Control Track Mounted Carrier (FOR HIRE/RENT - POA) (hire-ehub3419)For HireTray Length: 10 m (Not Including Power Pack) Width: 2.5 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL N/A
- 6x Sandvik DR560/80 Track Mounted Contour DTH Drill Rigs (FOR HIRE/RENT - POA) (hire-ehub3356)For HireMake: Sandvik Model: DR560/80 Hours: Various Max Feed Rate: 1.3 m/s (257 ft/min) Max Hoisting @ 2,100 RPM: 47 kN (10,600 lbf) Max Pulldown @ 2,100 RPM: 47 kN Top Drive Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM (Variable) Carousel Standard Capacity: 6 Rods (5 Rods for OD 140 mm (5.5" inch) Max Rod Size: 140 mm / 5.5" inch Min Rod Size: 89 mm / 3.5" inch Rod Length: 6.1 m / 20 ft Min Hammer Size: 102 mm / 4" inch Carousel Hole Depth: 42.6 m / 140 ft Max Hole Size: 216 mm / 8.5" inch Min Hole Size: 115 mm / 4.5" inch + More information can be provided Track Mounted Contour DTH Drill Rig Location: Western Australia Learn More
Machine hours Various
KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Western Australia
MODEL DR560/80
- 2017 Drilling Techniques Casing Lifter/Extractor (POA) (sale-ehub3321)For Sale$0.00Make: Drill Techniques Model: Casing Lifter/Extractor Year: 2017 Location: Queensland, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR 2017
BRAND Drilling Techniques
LOCATION Queensland, Australia
MODEL Casing Lifter/Extractor
- Sykes VP150i 1,500 RPM Skid Mounted Pump (FOR HIRE/RENT - POA) (hire-ehub3197)For HireMake: Sykes Model: VP150i Pump Speed: 1,500 RPM Max Pressure: 230 kPa Best Pressure: 167 kPa Min Pressure: 133 kPa 150 x 150 x 285 Skid Mounted Pump Location: Queensland, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND Sykes
LOCATION Queensland, Australia
MODEL VP150i