Search results for: 'hole to enabl 100 hz and adaptive spare'

Make: Mercedes Benz Model: Unimog Year: 1984 KM's: 9,116 - Ex Military Truck Location: Queensland, Australia Learn More

Drill Rig Model: GS5000 Hours: 300 Max. Torque: 3,200 ft lbs / 4,340 Nm Max. Spindle Speed: Approx. 118 RPM Stroke/Head Travel: 4 Metres Pullback: Approx. 8,000 kg Pulldown: Approx. 7,500 kg - Head Designed for Air Core / RAB / or Drilling Fluids - Sonic Head Included (Both have Hydraulic Side Shift Function) - Rexroth 100cc Variable Displacement Pump - 2x 45cc Rexroth Variable Displacement Pumps - Austeng Engineering Rotation Head (with 90mm Hollow Spindle) - 488 Litre Water Tank coupled to Dynaset 3,000 PSI Pressure Pump - 290 Litre Fuel Tank - 1 Metre Dump Mast - New Wireline Winch with 6 mm Non Rotating Cable - Hydraulic Grout Pump - Remote Hydraulic Breakaways - Toolboxes / Spare Parts Cabinets (Mounted on deck) Rebuild; - Completed January 2010 - Complete New Engineer Designed Chassis - New Casing Rack - Hydraulic Circuit Redesigned (Simplified) - New Tramming Hoses - New Tilt Ram Hoses - New Dump Ram Hoses - New Head Hoses - Various Other Hoses Replaced (Where Necessary) - New Seal Kits (To Tilt and Dump Rams) - Complete New Wiring Harness - New Breakout Arm - All Lights Replaced - All Hardware to Cabinets Replaced - All Bolts Replaced - Repainted with 3 Coat System - Radiator Serviced and Repainted Tracked Carrier Make: Yanmar Model: C50R Engine: Perkins 1004-4T Turbocharged 4 Cylinder Diesel Weight: 8,380 kg (9 Tonne) - .5 Metre Wide Bridgestone Rubber Tracks Support Truck Make: Volvo Model: FM12 Year: 2003 KM's: 350,855 - 7.5 Metre Tray Top - 2.6 Metre Long Ramps (Built into Tray) to accommodate a 500 mm wide track Track Mounted Crawler Drill Rig Package Location: Western Australia Learn More

Make: Colloidal Model: Colmixer SD400 Year: 2006 Hours: 77 Max. Output: 5.0 - 10 m3/hr Batch Capacity: 400 Litres Max. Press: 2 Bars Power: 22 kW Grout Mixing Unit Location: Western Australia Learn More

Make: CompAir Model: AP600 250 PC-2875 Year: 1995 Hours: 5,207 Engine: Cummins C6 Engine Number: 45032873 Serial: P-03887 600 CFM 250 PSI Dimensions; Length: 2.5 m Width: 1.8 m Height: 1.75 m Weight: 3.2 Tonne Skid Mounted Air Compressor Location: Western Australia Learn More

Make: Morooka Model: MST-2200VD Year: 2012 Hours: 82 Engine Power: 137 kW Serial Number: 223498 Weight: 11,350 kg Track Mounted Carrier Location: Western Australia Learn More

Make: Victor Pumps Model: S120 G32SR Year: 2006 Weight: 370 kg Hydraulic Driven Dewatering Pump Location: Western Australia Learn More

Make: Kemtron Model: SALSA-250 Year: 2010 Serial Number: 420005 Jack Up Drilling Fluid Recycling Unit Location: Western Australia Learn More

Year: 1999 - No Hour Meter Grout Mixing Trailer Location: Western Australia Learn More

Grout Mixing Unit Location: Western Australia Learn More

Make: Mitsubishi Model: Fuso Canter Year: 2010 KM's: 221,328 Type: 4x4 - 4.9 Litre Tray Truck Location: Western Australia Learn More

Make: Mitsubishi Model: Canter Year: 2010 KM's: 77,630 Type: 4x4 - 4.9 Litre Dimensions; Length: 5.8 m Width: 2.5 m Height: 3.1 m Weight: 3,620 kg Tray Truck Location: Western Australia Learn More

Make: Max Vac Model: RVS-00044 Vacuum Unit Location: Western Australia Learn More

- Containerised Vacuum Unit Location: Western Australia Learn More

Make: Rig Vac Discharge: Universal Silencer 6" SDY (RV-50HP) / 10" SDY (RV-100HP) - Rotary Lobe Blower with Direct Drive and Helical Timing Gear - DNV 2.7.1 Approved - Containerised - 20' Foot Vacuum System Location: Western Australia Learn More

Make: Rig Vac Model: RV-10HP - Offshore - Containerised - 10' Foot Vacuum System Location: Western Australia Learn More

Make: Max Vac Model: RVS-5 RV3560 Serial Number: 35610 Blower Unit: Roots Blower Pulley Diameter: 147 mm Motor Pulley Diameter: 280 Vacuum Unit Location: Western Australia Learn More

Make: Rig Vac Model: RV-50HP Flow (ICFM): 925.8 Speed (RPM): 1,775 BHP at Operating: 46.6 - Offshore - Containerised - 10' Foot Vacuum System Location: Western Australia Learn More

Tapping Range: -5% to +5% in 2.5% step (Off Load Tap Changer on HV Side) Windings: Aluminium HV / LV Bushings: Cable Box from sides Ambient Temp: 45 degrees C Type of Cooling: ONAN Vector Group: Dyn11 Number of Phase: 3 Impedance: Approx. 5% Input / Output Frequency: 50 Hz - 800 kVA 0.400/6.6 kV Transformer Location: Western Australia Learn More

- Containerised - Full Electrical Protection - Ventilation System - DNV / EN61558 Certified - 60 Hz - 480V to 690V Step-Up Transformer Location: Western Australia Learn More

Make: Toshiba Year: 2017 (SS14) Frequency: 50 Hz Oil (First Filling): 595 kg Total Mass: 3,400 kg - HV 11,000 Volts - LV 433 Volts - Dyn11 - 1,000 kVA Transformer Location: Western Australia Learn More