Search results for: 'intern flat pursue for spare'

Make: Narrow Series Model: KWL350RC DTH Fitted with Twin Saeur Danfoss OMTW 315 Hydraulic Orbital Motors Condition: New (Spare Part) Drill Rig Top Head Rotation Drive Unit Location: Western Australia Learn More

Make: General Breaker Model: GB7TL/GB8ATL Weight: 18-22 Tonne Titan Headplate: 80 mm pins, 320 mm ears and 470 mm centers - Industry standard breaker with Australian dealer and parts support - Comes with toolbox containing gas charge kit, tools and spares Full in house rebuild with the following new parts; - Tie Rods - Tool Retainers - Upper and Lower Bushes - Full Seal Kit - Charge Valve - Wedge Chisel - All Hardware and Fasteners Flame Resistant Hydraulic Hoses Piston and Bore in Perfect Condition Transport and Storage Stand Supplied Operators Manual in PDF Full 12 month Workshop warranty supplied Excavator Hammer Rock Breaker Location: Australia Learn More

Seamless Steel Drill Pipe with Tool Joints API Specification 5DP PSL 1 - 35" Inch Pin Taper Shoulder - Tool Joints will be included with 18 Deg Box - 2" Inch XL Tong Space & Threads shall be phosphatised - Internal Plastic Coating - Fitted with presses steel thread protectors on both ends - Shall be coated on the outside with rust preventing coating to withstand marine transportation. - Will be API Monogrammed Quantity: Various *Brand New* Drill Pipe Location: New South Wales, Australia Learn More

Make: International Model: T-Line T2670 Year: 1990 KM's: TBA Type: 8x4 Chassis / Cab Seats: 2 Compressor Make: Atlas Copco Model: XRVS 976CD Year: 2005 Hours: 5,674 Weight: 5,500 kg 317 kW Support Truck Air Compressor Location: Queensland, Australia Learn More

Rig Make: Sandvik Model: UDR650 Year: 1988 Hours: 6,568 - Historical Maintenance / Service Records Available - UDR650 Equipment Manuals - Upgrade - Mast Replaced March 2019 - Equipment upgraded / refitted every year to comply with standards and maintenance - Department of Transport Pit Inspections - Yearly - Compliance Certifications - NDT - Yearly - Lifting Register - Bi-Annual - Fire Extinguishers - Bi-Annual - Brake Tests - Bi-Annual - Spare Mast & Traverse Cylinder Included - No Onboard Air Compressor - Traverse cylinder - Tower / Mast (The mast was replaced approx. 3 years ago) - Steel hydraulic piping up the tower - New back plate for the Head Rack Truck Make: International Model: 2250-D Year: 1988 KM's: 94,122 Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Specifications; - 50 mm Tow-Ball Coupling & Dual Safety Chains - 50 mm Solid Square Axles - 9 Leaf Load Share Suspension - 12" Inch Electric Brakes - Electric Breakaway Unit - LED Tail, Indicator and Marker Lights - 15" Inch Sunraiser Wheels with 8 Ply Light Truck Tyres - 2 x Spare Wheels - 4 x Adjustable Stabiliser Legs Dimensions; Transport Width: 2.45 m Transport Height: 3.0 m Transport Length: 5.5 m Capacities; - Tare Weight: 2,500 kg to 2,750 kg - ATM: 3,500 kg Functions & Features; - Pigeonholes and under-bench tool storage - 125 mm Multipurpose Vice - Tooling and Hard Hat Hooks - 1 x Personal Access Door - Microwave - Fridge - Storage Cabinets - 5.5 kW Diesel Generator - 4 x Double Power Point GPO 10 AMP - 3.5 kW Daiken Split System Air Conditioner - Water Tank & Hand Wash Station - 8 x 12V/24V LED External Lights - 2 x 240v LED Internal Lighting - Retractable Awning - Dual Wheel Chocks Options; - Open Layout - Open plan full walkthrough - Split Layout - Separate workshop and office Roof mounted AC Unit (Domestic IBIS 4) Two-piece Rear Door 8.0 kW Diesel Generator Humpty Site Office / Workshop Trailers Location: Queensland, Australia Learn More

Rig Make: Edson Model: 8000 Year: 1993 Hours: 4,600 Engine: Cummins 855 @ 300 HP Deck Engine Mast: 11.5 m Pullback: 16 Tonne Stroke: 7 m Includes; - Dump Mast & Sliding Base - 13 Tonne Winch - 9 m Rod Pull - Head Side Rack - 2 Tonne Wireline Winch - Dual W1122 Bean Pumps - Foot Clamps - Overshot - Burst Protection on Hosing - E-Stops - Has Fire Suppression System Installed (Out of date) Rig Truck Make / Model: International Engine: Cummins 855 @ 400 HP Type: 8x4 - Road Ranger Box Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Cleveland Model: 400W Engine: Caterpillar CAT 3306 Quantity: 2 - Fully Guarded - Full Set of Buckets - Parts Including: - 20' Foot Container with Parts & Spare Engine (To be sold only internationally, not available to be sold in Australia) Trenchers Location: Queensland, Australia Learn More

Rig Make: Midway Model: 10M Year: 1983 Rotary: Rotary Serial No: 140467 Truck Make: International Model: SF2650 184 Year: 1980 Chassis / Serial No: K016680 Engine Make: Caterpillar Model: 3208T Serial No: 02Z54900 Family: 7C8805 Onboard Leroi 600 CFM / 125 PSI Compressor The Mud Pump is a Gardner Denver 5x6. Rig is functional. Hasn’t been used for about 5 years. Chains & cables are good on it. Draw works have been changed to Twin discs. 7 ½” Table that is retractable. Rig has been repainted. Everything runs off the truck engine. It has a Spicer transfer case 792. Location: Queensland, Australia Learn More

Total tank capacity: 79.5kL (500BBL) Road trainable Full-size submarine access door into tank Ladder accessible viewing platform to observe inflows and fluid heights Sight glass fluid level indicator Sunken suction sump with strainer grate Rugged 200 x 100 RHS perimeter frame 6mm crimped walls, 10mm floors Tandem axle, leaf spring suspension Internal surfaces coated with corrosion resistant paint *For any additional information, please contact us* Learn More

Make: Cortech Model: CSD3000 CSD3000 core drilling rig is specially designed for diamond core drilling. It provides precise control on the drilling capacity. The drill head is designed to slide and dump, together with the full angle rotation structure for drill mast, it effectively reduces manual inputs and improves efficiency. The hydraulic legs are stretchable, which broaden the bearing surface, and ensure outstanding reliability. Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. • 9 meters rod pulling largely improves drilling efficiency due to rod collection frame design on mast • The design of side shift by hydraulic of rotation head largely reduces working tensions and guarantees personnel safety • Multi-pressure gauge reads real time pressures for kinds of major components • High/low speed control of main winch largely meets speed requirements for rods handling • Stepless control of mud pump flow facilitates various drilling needs for mud • telescopic mast greatly reduces working tensions and improves drilling efficiency. • Horizontal extension of jack legs guarantees firm rig standing on the ground. • Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. • Independent tramming cab set in front provides full view for easy rig walking and driver’s safety • Mast dumping guarantees perfect stability during drilling; • Independent hydraulic jacks facilities leveling of the rig; • Great convenience of control of feed pressure; • Standardized parts and components make maintenance and repairing easy; • Real time reading of drilling data on gauges on the control panel; • Mud pump and mixer powered by the rig’s hydraulic system, controlled directly on the rig’s panel; • Top grade hydraulics of European origin; • Experienced engineers plus adequate spare parts ready to provide full service. Specifications: Drilling Capacity Dia of Drill Rod BS,NS,HS,PS Drilling Depth 3,000m 2,300m 1,600m 1,050m Hydraulic System Pressure 28MPa Cooling Air Cooled Power System Model Cummins 6LTAA8.9-C325 Type Turbo Charged Power 239KW Engine RPM 2,200rpm Drill Head Max Torque 8,170Nm Max Rotation ,RPM 1,250rpm Feed Stroke 3,450mm Max Inside Diameter 117mm Max Pull /Max Push 250KN/110KN Main Winch Max Pull 181.44KN Pulling Speed Low:33m/min High:70m/min Rope Diameter 24mm Rope Length 41m Wireline Winch Max Pull 18KN(bare drum) Pulling Speed 150m/min(bare drum) Rope Diameter 6.6mm Rope Length 2,500m Mast Length 11.2-13.7m Drilling Angle 45°-90° Dump Length 1.4m Foot Clamp Drill Rod BS, NS, HS, PS Travelling Capacity Max.Permissible Gradient 30° Max.Travelling Speed 2km/h Transporting Dimensions L×W×H 11,240×2,310×3,330mm Total Weight 23.5t Diamond Coring Drill Rig Location: China Learn More