Search results for: 'intern float pursue for state'

Rig Make: Hydramaster Model: 2000 - Fully Tooled & Spares - Recently painted Truck Make: International Model: Acco Year: 1998 KM's: 506,309 Type: 4x2 Engine: Cummins 300 HP Gearbox: 9 Speed Tri Axle Trailer - Near New - Set up for cable tool equipment Condition: Good Truck Mounted Cable Tool Drill Rig Tri Axle Trailer Location: Queensland, Australia Learn More

Rig Make: Hydrapower Model: Explorer 500 Year: 2007 Hours: 6,700 Engine: Cummins CPAK-6BTA Turbo After Cooled 6 Cylinder (176 HP @ 2,500 RPM) Rig Hydraulics; - Sauer Danfoss proportionally controlled control valves - Sauer closed loop pump on Rotary Drive Sauer open loop pump on auxiliary functions Rotary Drive; - Hydrapower Gearbox - Steel Casing with floating hollow spindle and hydraulic head lock and swing - Two Speed, 0 - 225 RPM & 0 - 966 RPM - Low speed torque to 4150 Nm - High speed torque to 966 Nm Head Travel: 6.8 m Main Winch; -Max. Pull: 4,200 kg -Max. Line Speed: 28 m/min Wireline Winch; Max. Pull: 780 kg Max. Line Speed: 83 m/min Pulldown; - Electrically controlled with dial for speed control Pull Down Capacity: 7000 kg Pull Out Capacity: 11,500 kg Mast; - Fitted with 2.0 m mast dump for angle drilling - Standard length is 10 m, supplied with hydraulically operated breakout spanner and top pulley swivel - Supplied with hydraulic circuit with quick-connect couplings for optional breakout table - Brakeout Table with Split Type Table - Bean Pump - 5x6 Gardner Denver Mud Pump (Hydraulic Driven) Truck Make: MAN Model: M2000 Year: 2005 KM's: 75,000 - Not registered - Some gearbox problems Truck Mounted Drill Rig Location: New South Wales, Australia Learn More

Make: Epiroc Model: DM-L Year: 2005 Hours: 8,453 Engine: Cummins QSX15 Tier 3 - 33.5" Inch Triple Grouser Tracks - 30' Foot Tower Carousel - Can be set up for 5.5" Inch or 6.25" Inch Rods - 4 or 5 Pieces Air End Track Mounted Rotary Drill Rig Location: United States of America Learn More

Make: Caterpillar Model: 16M Year: 2008 Hours: 37,752 (Frame) / 5,834 (After Overhaul) Engine: Caterpillar CAT C13 - Complete Overhaul in 2022 Motor Grader Location: United States of America Learn More

Sizes; 1x 10mm x 1,800mm (ID) x 12m (5.36mt) 1x 10mm x 1,500mm (ID) x 12m (4.468mt) 1x 10mm x 1,200mm (ID) x 12m (3.581mt) 1x 10mm x 1,000mm (ID) x 12m (2.989mt) 1x 10mm x 900mm (ID) x 12m (2.693mt) 1x 10mm x 700mm (ID) x 12m (2.1mt) 1x 10mm x 600mm (ID) x 12m (1.835mt) - Steel Pipes Spiral Welded (API 5L B C250) - All pipes coated internal/external with Amerlock 2/400 blue & white Large Irrigation Pipe Location: Australia Learn More

Make: International Model: Acco 2350G Year: 1997 KM's: 96,179 Engine: Cummins C300 Type: 8x4 Cab Chassis Truck Location: Queensland, Australia Learn More

Make: International Model: 2700 Year: 1996 KM's: 399,361 Engine: Cummins C330 Type: 6x4 - Fold Down Walkways - Flat Bed Water Truck Location: Queensland, Australia Learn More

Q80K - Top Head Drive - 0-8,328 Nm (6,142 ft/lbf) in low gear - High Gear 3.04:1 Ratio - Low Gear 12.61:1 Ratio - Shift between High and Low Gear Ratios - 0-1,500 RPM Speed Range - Splined Floating Spindle - Independent Pressurized Lubrication System - Gearbox oil level inspection windows - Variable Speed Hydraulic Motor - Gear train for High/Low Ratio Q150K - Top Head Drive - 0-14,324 Nm (10,564 ft/lbf) in low gear - High Gear 3:1 Ratio - Low Gear 22.5:1 Ratio - Shift between High and Low Gear Ratios - 0-1,500 RPM Speed Range - Splined Floating Spindle - Independent Pressurized Lubrication System - Gearbox oil level inspection windows - Variable Speed Hydraulic Motor - Planetary Gear set for High/Low Ratio Q280K - Top Head Drive - 0-28,000 Nm (20,651 ft/lbf) in low gear - High Gear 3:1 Ratio - Low Gear 22.5:1 Ratio - Shift between High and Low Gear Ratios - 0-1,500 RPM Speed Range - Splined Floating Spindle - Independent Pressurized Lubrication System - Gearbox oil level inspection windows - Variable Speed Hydraulic Motor - Dual Planetary Gear set for High/Low Ratio Rotation Head Gearboxes Location: Australia Learn More

Model: FH2000 Engine: Caterpillar CAT C7.1 Electronic @ 205 kW (275 HP) Pull Back: 280 kN (62,900 lbf) Limited Speed 244.8 kN (55,033 lbf) Full Speed Pull Down: 115 kN (25,853 lbf) Water Pump Options; - Standard FMC W1122BCD 140 lpm @ 1,000 psi - FMC L11-18SC 265 lpm @ 1,800 psi Depth Capacity; NQ Core: 2,030 m HQ Core: 1,377 m Open Hole 3 1/2" Inch Rods: 900 m RC 4 1/2" Inch: 600 m (Nominal) Traverse Speed; Up: 50 m/min (164 ft/min) Down: 39 m/min (128 ft/min) Rotation Head; - Top Head Drive - Maximum Torque: 14,324 Nm (10,564 ft/lb) in low gear - 0-1,500 RPM Speed Range - Bosch Rexroth A6VM160 Variable Displacement Motor - High Gear 3:1 & Low Gear 19.57:1 ratios - Adjustable Rotation Torque Control - Infinitely Variable Rotation Speed Control - Floating Spindle 3 1/2" Inch API IF Pin Thread - Pressure Lube Bearings and Gears with filtered and cooled lubrication oil system Main Winch; - Maximum Pull: 156 kN (35,048 lbf) - 120 m/min (394 ft/min) - Mast Top Mounted - Electronic Winch Travel - Fail to safe - 28 mm Main Winch Rope - Safety Factor 3.35:1 (exceeds BS/EN791) - 1x Bosch Rexroth A6VM160 Variable Displacement Motors - 1x Brevini Planetary Reduction Gear Boxes - 1x Multi Disc Brake Units - Fail Safe Spring Activated - Hydraulic Pressure Release Wireline Winch; - Mast Mounted - Maximum Pull: 25 kN (5,617 lbf) - Rope Capacity: 2,100 Metres x 8 mm Rope - Adjustable Position Wireline Spooler - Maximum Speed: 450 m/min (1,476 ft/min) - Adjustable Pull Limiter - Safety Stop System - Wireline Depth Counter as an option New Build Multipurpose Track / Truck Mounted Drill Rig Location: Australia Learn More

Model: FH1300 Engine: Caterpillar CAT C7.1 Electronic @ 187 kW (250 HP) Pull Back: 115 kN (25,853 lbf) Actual Pull Down: 70 kN (15,736 lbf) Water Pump Options; - Standard FMC W1122BCD 140 lpm @ 1,000 psi - FMC L11-18SC 265 lpm @ 1,800 psi Depth Capacity; NQ Core: 1,300 m HQ Core: 885 m Open Hole 3 1/2" Inch Rods: 380 m RC 4 1/2" Inch: 220 m (Nominal) Traverse Speed; Up: 60 m/min (196.8 ft/min) Down: 56 m/min (183.7 ft/min) Rotation Head; - Top Head Drive - Maximum Torque: 8,087 Nm (6,111 ft/lb) in low gear - 0-1,500 RPM Speed Range - Two Speed Gearbox - High Gear 3.04:1 & Low Gear 12.61:1 ratios - Variable Displacement 160cc Hydraulic Motor - Adjustable Rotation Torque Control - Infinitely Variable Rotation Speed Control - Floating Spindle 3 1/2" Inch API IF Pin Thread - Pressure Lube System with Cooler and Filter Main Winch; - Maximum Pull: 100 kN (10,000 lbf) - 120 m/min (393 ft/min) - Mast Top Mounted - Electronic Winch Travel - Fail to safe - Main Winch Rope - Safety Factor to Meet BS/EN791 - Planetary Reduction Gear Box & Brake - Variable Displacement Hydraulic Motor Drive Wireline Winch; - Deck Mounted - Maximum Pull: 15 kN (3,372 lbf) - Rope Capacity: 1,400 Metres x 6 mm Rope - Adjustable Position Wireline Spooler - Maximum Speed: 450 m/min (1,476 ft/min) - Adjustable Pull Limiter - Safety Stop System - Wireline Depth Counter as an option New Build Multipurpose Track / Truck Mounted Drill Rig Location: Australia Learn More

Make: International Navistar Model: 4900 Year: 2001 KM's: 346,813 Type: 6x4 Includes; - 59x 6 Metre HQ Drill Rods - 34x 6 Metre HWT Drill Rods - 2x Inner Tubes - 1x Barrel Complete Support Truck Location: Queensland, Australia Learn More

Truck Make: International Model: T2700 Year: 1994 Engine: Cummins 350 HP KM's: 925,000 Type: 8x4 Grout Unit Make / Model: Drillex Year: 2011 Hours: Less than 5,000 - 800 m Capability - HIAB Crane Fix for Handling 1 Tonne bag of Cement Powder - 4,000 Litre Mixing Tank and Hopper - Large Capacity Mono Pump - 10,000 Litre Flat Bed Water Tank - 8 Tonne Cement Storage - PTO Driven Hydraulics Bulk Handling Self-Contained Grouting Rig Location: Queensland, Australia Learn More

Make: Gardner Denver Model: PZ-7 Year: 2014 - Triplex w/ Forged Steel Fluid End & Quick Change Caps - 5M Pulsation Dampener - Oteco 3" Inch Shear Relief Valve - Pressure Gauge - Mission 6x5 Charge Pump - Fitted with 7" Inch Liners & Pistons - No Engine or Transmission Condition: Good Skid Mounted Mud Pump Location: United States of America Learn More

Make: FMC Model: L1122 Stroke Length: 2.75" Inch Piston Diameter: 2.75" Inch Frame Load Rating: 6,000 lbs Internal Gear Ratio: 3.6:1 Intermittent Duty Speed Rating: 1,275 RPM Continuous Duty Speed Rating: 900 RPM Standard Suction Size: 2.50" Inch NPT Standard Discharge Size: 1.25" Inch NPT Number of Pistons: 3 Horizontal Triplex Piston Pump Location: New South Wales, Australia Learn More

Make: UDR / Sandvik Model: 1000 / DE840 Year: 2005 Engine: Cummins 6CTA8.3 - Hydraulic Rod Clamp - Top Drive Rotary Head - Hollow Floating Spindle - Onboard FMC W1122 Bean Pump - Onboard Sullair 1150 CFM / 350 PSI Air Compressor - Still operational but due for a rebuild Includes; - Mast Dump - Rod Spinner - Sandvik DA554 Rod Handler - RC Sampling System - Fire Suppression Truck Make: MAN Type: 8x4 Truck Mounted Multipurpose Drill Rig Location: New South Wales, Australia Learn More

Make: Rail Gantry Model: RGC Load Capacity: 500 Tonne Lifting Speed Under Loading: 0.5m/min Trolley Running Speed: 1m/min Crane Running Speed: 0.10m/min - Only used for 1-2 lifts - Basically New & already dismantled for shipping - CIMOLAI Technology Spa will also be able to provide installation anywhere around the world Dimensions Internal Width: 15 mt Max Width: 18.3 mt Lifting Height: 22 m from top to 46 m underground Crane Location: Italy Learn More

Seamless Steel Drill Pipe with Tool Joints API Specification 5DP PSL 1 - 35" Inch Pin Taper Shoulder - Tool Joints will be included with 18 Deg Box - 2" Inch XL Tong Space & Threads shall be phosphatised - Internal Plastic Coating - Fitted with presses steel thread protectors on both ends - Shall be coated on the outside with rust preventing coating to withstand marine transportation. - Will be API Monogrammed Quantity: Various *Brand New* Drill Pipe Location: New South Wales, Australia Learn More

Make: International Model: T-Line T2670 Year: 1990 KM's: TBA Type: 8x4 Chassis / Cab Seats: 2 Compressor Make: Atlas Copco Model: XRVS 976CD Year: 2005 Hours: 5,674 Weight: 5,500 kg 317 kW Support Truck Air Compressor Location: Queensland, Australia Learn More

Rig Make: Sandvik Model: UDR650 Year: 1988 Hours: 6,568 - Historical Maintenance / Service Records Available - UDR650 Equipment Manuals - Upgrade - Mast Replaced March 2019 - Equipment upgraded / refitted every year to comply with standards and maintenance - Department of Transport Pit Inspections - Yearly - Compliance Certifications - NDT - Yearly - Lifting Register - Bi-Annual - Fire Extinguishers - Bi-Annual - Brake Tests - Bi-Annual - Spare Mast & Traverse Cylinder Included - No Onboard Air Compressor - Traverse cylinder - Tower / Mast (The mast was replaced approx. 3 years ago) - Steel hydraulic piping up the tower - New back plate for the Head Rack Truck Make: International Model: 2250-D Year: 1988 KM's: 94,122 Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Specifications; - 50 mm Tow-Ball Coupling & Dual Safety Chains - 50 mm Solid Square Axles - 9 Leaf Load Share Suspension - 12" Inch Electric Brakes - Electric Breakaway Unit - LED Tail, Indicator and Marker Lights - 15" Inch Sunraiser Wheels with 8 Ply Light Truck Tyres - 2 x Spare Wheels - 4 x Adjustable Stabiliser Legs Dimensions; Transport Width: 2.45 m Transport Height: 3.0 m Transport Length: 5.5 m Capacities; - Tare Weight: 2,500 kg to 2,750 kg - ATM: 3,500 kg Functions & Features; - Pigeonholes and under-bench tool storage - 125 mm Multipurpose Vice - Tooling and Hard Hat Hooks - 1 x Personal Access Door - Microwave - Fridge - Storage Cabinets - 5.5 kW Diesel Generator - 4 x Double Power Point GPO 10 AMP - 3.5 kW Daiken Split System Air Conditioner - Water Tank & Hand Wash Station - 8 x 12V/24V LED External Lights - 2 x 240v LED Internal Lighting - Retractable Awning - Dual Wheel Chocks Options; - Open Layout - Open plan full walkthrough - Split Layout - Separate workshop and office Roof mounted AC Unit (Domestic IBIS 4) Two-piece Rear Door 8.0 kW Diesel Generator Humpty Site Office / Workshop Trailers Location: Queensland, Australia Learn More