Search results for: 'mobil axle coffee tank spt for spare'

Set Ascending Direction

121 items

per page
Did you mean
mobil axle coffee tank spt for sale
Related search terms
forks river r poa 2007 for sale
forc ripper r poa 2007 for sale
for ripper r poa 2007 for sale
foremost revers r poa 2008 for sale
for ripper r poa 200 for sale
  1. American Augers DD140 Track Mounted Drill Rig HDD SIS Package (POA) (sale-ehub4048)
    For Sale
    $0.00
    Drill Rig Make: American Augers Model: DD140 Control Room Capacity: 20’ Foot Storeroom Capacity: 10’ Foot Genset Make: Kubota Model: GL9000D-AU-B Serial No: K10450 Capacity: 9kVA Control Room Trailer Make: Krueger Model: ST338 Year: 2008 ATM: 38 Tonne VIN: 6FH9079AB8M012264 - Trailer Pipe Handler Trailer Make: Gallagher Year: 2024 Max. Lifting Capacity: 1,100 kg - Purpose built Tandem Axle Trailer on airbag suspension with EBS braking - 4x Hydraulic Jack Legs - Self-Contained other than using the DD140 Auxiliary Hydraulics - Can present Horizontal Rod/Casing/BHA from a rod bench & install into the machine - Supplied with requested dies to suit rods, casing & BHA equipment - Full operational dash, with E-Stops on various positions - Complete working deck between the rig & road loader Including; - Rig Sub Base and Drill Floor Not Included; - Koomey Unit (in Photos) Track Mounted Drill Rig Package Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Queensland, Australia

    MODEL

    DD140

  2. Boart Longyear LS600 / BL600C Track Mounted Multipurpose Sonic Drill Rig & 2011 Morooka Track Mounted Support Unit ($USD550,200 / $USD700,650 w/ Sonic Heads) (sale-ehub4047)
    For Sale
    $0.00
    Rig Make: Boart Longyear Model: LS600 / BL600C Hours: 5,905 (New Engine Fitted in 2023 – Only a few hundred hours since) - 2x Boart Longyear BLY150 Reconditioned Sonic Heads (Ready to go and can be included) - Head Spares and some other big spares Support Unit Make: Morooka Hours: 423 Year: 2011 Track Mounted Multipurpose Sonic Drill Rig Support Unit Location: Scotland Learn More
    Machine hours

    5,905 / 423

    KILOMETERS N/A
    YEAR

    2011

    BRAND

    Boart Longyear

    LOCATION

    Scotland

    MODEL

    LS600 / BL600C

  3. 2009 Nissan Patrol DX GU MY08 4x4 Ute ($30,000) (sale-ehub4044)
    For Sale
    $30,000.00
    Make: Nissan Model: Patrol DX GU MY08 Year: 2009 KM's: 282,381 Transmission: 5 Speed Manual Type: 4x4 - New Engine at 241,000 km's - Clutch and Flywheel - 3" Inch Exhaust - Long Range Tank - Water Tank - 2x Spare Tyres - Full Mine Spec (inc. UHF, High Vis, etc.) Ute Location: Western Australia Learn More
    Machine hours N/A KILOMETERS

    282,381

    YEAR

    2009

    BRAND

    Nissan

    LOCATION

    Western Australia

    MODEL

    Patrol DX GU MY08

  4. 2010 Ubuilt Cassady CTU Coil Tubing Unit Mounted on 2005 Ensign Carrier ($295,000 ex GST) (sale-ehub4015)
    For Sale
    $295,000.00
    Make / Model: Ubuilt Cassady CTU Carrier & Booster OD Year: 2010 Hours: 310 Engine: John Deere ATM: 61,500 kg Trailer Make: Ensign Model: C.T. 1000 Year: 2005 Tyre Size: 275/70R22.5 Rim Size: 8.25x22.5 Axle Group Load Carrying Capacity: 37,500 kg - Handrail and Stair Upgrade by Obadare CTU Coil Tubing Unit Carrier Mounted Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR

    2010

    BRAND

    N/A

    LOCATION

    Queensland, Australia

    MODEL

    Ubuilt Cassady CTU Carrier & Booster OD

  5. 2007 Drill Rig Mounted on 2007 Isuzu FTS 750 4x4 Table Top Truck ($145,000 ex GST) (sale-ehub4003)
    For Sale
    $145,000.00
    Rig Year: 2007 Hours: 3,000 Engine: Caterpillar (85 HP) Stroke: 3,300 mm - 2 Speed Head Rotation Torque: 2,500/450 Nm Rotation Speed: 140/750 RPM Pullback: 7,000 kg Pull Down: 4,000 kg - Set up for Geotechnical Drilling with Auto SPT - 1x Main Winch - 2x Wireline Winch - Mono Pump - Four Jack Legs - Drilling Rods, Alloy Mud Tanks, Accessories for 50 m (All in Good Condition) Truck Make: Isuzu Model: FTS 750 Year: 2007 KM's: 55,000 Type: 4x4 Table Top Truck Mounted Drill Rig Location: Queensland, Australia Learn More
    Machine hours

    3,000

    KILOMETERS

    55,000

    YEAR

    2007

    BRAND

    N/A

    LOCATION

    Queensland, Australia

    MODEL

    N/A

  6. TT300 Trailerised Drill Rig + Volvo FH12 460 Truck with Atlas Copco XRV1200 Air Compressor & More Package (POA) (sale-ehub3999)
    For Sale
    $0.00
    Rig Model: TT300 Hours: 18 Engine: Deutz F6L912 / 66 kW Rated Depth Capacity: 300 m Feed Cylinder: 100 mm Barrel / 70 mm Shaft / 4 m Stroke Outrigger (Jacks): 4x Boxed Outriggers with 800 m Stroke Foam Pump: 21 Litre per min / 35 bar Foam/Water Tank: 120 Litre Axles: 2x 5 Tonne Air Braked Axles Tower: Direct on Cylinder / Triangle Shape Winch: 1 Tonne Push Down Force: 5,000 kgf @ 175 bar Pull Up Force: 13,000 kgf @ 175 bar Tilt Cylinders: 2x 80 Barrel 50 Shaft Breakout: 300 mm Stroke Cylinder Hydraulic Oil Tank Capacity: 330 Litres - Hydraulic Oil Cooler - Extended Tower to accommodate 4 m Stroke Cylinder - Spanners Included: 1x Breakout / 2x Keeper / 3x Hammer Modifications; - Hydraulically Tilt Rotary Head - Rotary changed to geared Rotary Head with Hollow Spindle (8,000 Nm Torque) - Including 2x Eaton Hydraulic Motors - Side Shift (on rotary head – opens up the tower for longer casing, etc.) Support Truck Make: Volvo Model: FH12 460 KM’s: 1,040,378 Type: 8x4 Air Compressor Make: Atlas Copco Model: XRV1200 Year: 2020 Hours: 122 Engine: Cummins Pressure: 22.7 bar / 330 PSI Engine/Motor Speed: 1,900 RPM Engine/Motor Power: 325 kW / 430 HP 1,200 CFM / 330 PSI - Included Drill Bits, Rods and Drilling Equipment Trailerised Drill Rig Support Truck Air Compressor Package Location: New Zealand Learn More
    Machine hours

    18

    KILOMETERS

    1,040,378

    YEAR

    2020

    BRAND

    N/A

    LOCATION

    New Zealand

    MODEL

    TT300

  7. 2012 ZJ50D/3150 Drill Rig (FOR HIRE/RENT - POA) (hire-ehub3991)
    For Hire
    Rig Model: ZJ50D/3150 Year: 2012 Mast Model: JJ315/45-K6 Substructure Model: DZ3159-S Drawworks Model: JC50D Power: 1,500 HP Rotary Table Model: ZP-375 Full Opening: 37.5” Inch Rotary Speed: 300 RPM Mud Pump Power: 1,600 HP Stroke: 120 RPM Working Pressure: 5,000 PSI Quantity: 2x Mud Tank Shaker Tank: 25 CuM Intermediate Tank: 40 CuM Suction and Mixing Tank: 20 CuM Solids Control - 3x Shale Shaker - 1x Mud Cleaner - 1x Centrifuge Drill Rig Location: Japan Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Japan

    MODEL

    ZJ50D/3150

  8. 2007 Atlas Copco RD20-III Carrier Mounted Drill Rig (POA) (sale-ehub3983)
    For Sale
    $0.00
    Make: Atlas Copco Model: RD20-III Year: 2007 Hours: 7,500 - In Good Working Order - Full Service Report Available This used 2007 RD20 Range III Atlas Copco Rig is a powerful and versatile drilling machine, ideal for a wide range of applications. Equipped with on IR 1,250 CFM / 350 PSI Air Compressor, this rig delivers exceptional performance and efficiency. Powered by a robust CAT C13 engine, the rig ensures smooth operation and ample power. The Cummins QSK19 deck engine further enhances its performance capabilities, delivering 755 HP for demanding drilling tasks. With a substantial pullback capacity of 120,000 lbs (54,446 kg), this rig can handle tough drilling conditions with ease. Mounted on a crane carrier truck, this RD20 III Atlas Copco Rig provides excellent mobility and stability. The rig has been meticulously maintained to ensure optimal condition and longevity. Its clean appearance reflects the owner’s commitment to proper care and maintenance. Carrier Mounted Drill Rig Location: New South Wales, Australia Learn More
    Machine hours

    7,500

    KILOMETERS N/A
    YEAR

    2007

    BRAND

    Atlas Copco

    LOCATION

    New South Wales, Australia

    MODEL

    RD20-III

  9. Caterpillar CAT C11 Skid Mounted Engine with Integrated 800 Litre Diesel Tank ($39,500 ex GST) (sale-ehub3976)
    For Sale
    $39,500.00
    Make: Caterpillar Model: C11 Hours: 17,316 - With Integrated 800 Litre Diesel Tank - Dyno Test Results and ECM Available 350 HP 1,800-2,100 Complete Package with Control Panel and Starter and Alternator Dimensions; Length: Overall 250 cm (Take off 50 cm if you relocate Air Cleaner) Height to top of Valve Cover (Engine): 120 cm To top of Pre-Cleaner: 180cm To top of Muffler: 220 cm Width: 110 cm (Radiator) Skid Mounted Engine Location: Australia Learn More
    Machine hours

    17,316

    KILOMETERS N/A
    YEAR N/A BRAND

    Caterpillar CAT

    LOCATION

    Australia

    MODEL

    C11

  10. 4,000 Litre Skid Mounted Tank ($4,500 ex GST) (sale-ehub3964)
    For Sale
    $4,500.00
    Capacity: 4,000 Litres Skid Mounted Tank Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Queensland, Australia

    MODEL

    4,000 Litre

  11. Hydramaster 2000 Cable Tool Drill Rig Mounted on 1998 International Acco 4x2 Truck & Tri Axle Trailer ($99,000 ex GST) (sale-ehub3957)
    For Sale
    $99,000.00
    Rig Make: Hydramaster Model: 2000 - Fully Tooled & Spares - Recently painted Truck Make: International Model: Acco Year: 1998 KM's: 506,309 Type: 4x2 Engine: Cummins 300 HP Gearbox: 9 Speed Tri Axle Trailer - Near New - Set up for cable tool equipment Condition: Good Truck Mounted Cable Tool Drill Rig Tri Axle Trailer Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS

    506,309

    YEAR

    1998

    BRAND

    Hydramaster

    LOCATION

    Queensland, Australia

    MODEL

    2000

  12. 2012 Caterpillar CAT 775G Truck with MEGA Water Tank (POA) (sale-ehub3926)
    For Sale
    $0.00
    Make: Caterpillar Model: 775G Year: 2012 Hours: 8,737 Water Tank: MEGA Condition: Very Good Water Tank Truck Location: Chile Learn More
    Machine hours

    8,737

    KILOMETERS N/A
    YEAR

    2012

    BRAND

    Caterpillar

    LOCATION

    Chile

    MODEL

    775G

  13. 2013 Caterpillar CAT 777G Truck with Mega TT20 20,000 Gallon Water Tank (POA) (sale-ehub3925)
    For Sale
    $0.00
    Make: Caterpillar Model: 777G Year: 2013 Hours: 5,575 Condition: Very Good Water Tank Make: Mega Model: TT20 Gallons: 20,000 Water Tank Truck Location: Chile Learn More
    Machine hours

    5,575

    KILOMETERS N/A
    YEAR

    2013

    BRAND

    Caterpillar

    LOCATION

    Chile

    MODEL

    777G

  14. 2000 & 2001 Caterpillar CAT 777D Lubricator Trucks (POA) (sale-ehub3923)
    For Sale
    $0.00
    Make: Caterpillar Model: 777D Year: 2000 & 2001 Hours: 32,012 (2000) & 21,378 (2001) Quantity: 2 - Olympic Tank Lubricator Trucks Location: Central America Learn More
    Machine hours

    32,012 & 21,378

    KILOMETERS N/A
    YEAR

    2000

    BRAND

    Caterpillar

    LOCATION

    Central America

    MODEL

    777D

  15. DB Traserscreen DB-40M Mobile Compact Sieve Sorter (POA) (sale-ehub3916)
    For Sale
    $0.00
    Make: DB Model: Traserscreen DB-40M Transport Length: 2,300 mm Transport Width: 1,520 mm Transport Height: 1,925 mm Weight: 500 kg Mobile Compact Sieve Screen Location: Slovakia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Slovakia

    MODEL

    DB-40M

  16. DB Traserscreen DB-15XL Mobile Compact Sieve Sorter (POA) (sale-ehub3915)
    For Sale
    $0.00
    Make: DB Model: Traserscreen DB-15XL Transport Length: 2,310 mm Transport Width: 1,380 mm Transport Height: 1,657 mm Weight: 350 kg Mobile Compact Sieve Screen Location: Slovakia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Slovakia

    MODEL

    DB-15XL

  17. S Reps 750 Gear Package ($8,000 ex GST) (sale-ehub3900)
    For Sale
    $8,000.00
    Includes; - 2x Complete Hammers (1x with a Hole Opener) - 1x Hammer in parts (Can Assemble with New Casing) - 17x Various Sized Shrouds (Mostly New) - 10x Bits (5x New & 5x Had One Run but Nearly New) - 7x Hammer Tubes - 4.5" Inch Remet to Metzke Hammer Adaptor and Inner Tubes - Various Other Spares S Reps 750 Gear Package Location: Western Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Western Australia

    MODEL

    See Description

  18. Water Evaporator (FOR HIRE/RENT - POA) (hire-ehub3873)
    For Hire
    Model: OIE187 Cannon Fan: 425,000 m3/hr / Dual Fiber Glass PAG Impeller Discharge Hose: 1.5" Inch & 500 PSI High Pressure Pump: 7-8 Bars Discharge Fan Power: 130 kW Pump Power: 55 kW Pump Flow: 150 m3/hr Evaporation Rate: 24.98 lps @ 60% Daily Operating Time: 10 Hours + - SS Ring with Nozzles - Spiral Nozzle SS316 - Fan Safeguard Mesh - Control Panel Generator Make: Shanghai Stamford Brushless Engine: Dongfeng Cummins Control System: HGM6110 Large Screen Radiator: Engine Standard Matching Fuel Tank: 1,000 Litres Battery: 2x Camel 12V Weight: 6,000 kg approx. - Waste Water Handling - Dewatering Process - Tailing Dams - Water Production - Rainstorm Water Clearance Water Evaporator Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Queensland, Australia

    MODEL

    OIE187

  19. Water Evaporator (POA) (sale-ehub3873)
    For Sale
    $0.00
    Model: OIE187 Cannon Fan: 425,000 m3/hr / Dual Fiber Glass PAG Impeller Discharge Hose: 1.5" Inch & 500 PSI High Pressure Pump: 7-8 Bars Discharge Fan Power: 130 kW Pump Power: 55 kW Pump Flow: 150 m3/hr Evaporation Rate: 24.98 lps @ 60% Daily Operating Time: 10 Hours + - SS Ring with Nozzles - Spiral Nozzle SS316 - Fan Safeguard Mesh - Control Panel Generator Make: Shanghai Stamford Brushless Engine: Dongfeng Cummins Control System: HGM6110 Large Screen Radiator: Engine Standard Matching Fuel Tank: 1,000 Litres Battery: 2x Camel 12V Weight: 6,000 kg approx. - Waste Water Handling - Dewatering Process - Tailing Dams - Water Production - Rainstorm Water Clearance Water Evaporator Location: Queensland, Australia Learn More
    Machine hours N/A KILOMETERS N/A
    YEAR N/A BRAND

    N/A

    LOCATION

    Queensland, Australia

    MODEL

    OIE187

  20. 2016 Hanjin D&B-8D Track Mounted Drill Rig ($107,500 ex GST) (sale-ehub3839)
    For Sale
    $107,500.00
    Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - 1x Set of NQ Jaws *New* - 1x Set of HQ Jaws *New* - Cameron Water Gauge *New* - Wrap Around Mast - SPT Hammer Included - Rod Racks - Suction Hose and 2x Double Braid 1" Inch Duffield Bypass Hoses - 5x 100 mm Augers and 1x Bit Plus Drive Sub - 1 1/2" Inch Centrifugal Pump and Hoses - Plus Camlocks *All New* - 36" Inch & 24" Inch Stilsons - Chain Wrench - 1.5 Metre NMLC Core Barrel Plus 5x 3 Metre NQ Rods - 2x Mud Tanks - 7x5' Foot Box Trailer Tracked Mounted Drill Rig Location: New South Wales, Australia Learn More
    Machine hours

    5,800

    KILOMETERS N/A
    YEAR

    2016

    BRAND

    Hanjin

    LOCATION

    New South Wales, Australia

    MODEL

    D&B-8D

Set Ascending Direction

121 items

per page