Search results for: 'new hose for size'

Hammers; 1x Halco 8" Inch Hammer - Running 8" Inch Bits - 1x Used & 1x New 1x Halco 8" Inch Hammer - With Integral Spiral Stabiliser to give 10" Inch OD - Running 10" Inch Bits with Retention; 2x Used - Good Condition & 1x Brand New Drill Pipe; Length: 4.5" Inch Type: 2 7/8" Inch IF Threads - Most Near New - Done 6x Bores (All less than 100 Metres) - Cleaned & Greased - Fitted with Thread Caps & Plugs Drill Pipe & Hammers Package Location: South Australia Learn More

- 2x Jaw / Rod Booms - 1x Main Pivot Cylinder with Hydraulic Motor and Rod Knuckle Assy (No Motor) - 1x Rod Kicker - 1x Main Pivot Cylinder *New* - 1x Remote Control Unit *New* Rod Handler Parts Package Location: South Australia Learn More

Rig Make: UDR Model: 1000 Hours: 270 (Since Engine Rebuild) Engine: Detroit GM 6V-71 (Completely Rebuilt) - Head Rebuilt, All New Selectors, Gear Train, Bearings and Upgraded to Splined Output Spindle and Shaft (17 Hours used since) - Genuine Sandvik Parts Used - Hydraulic Motor tested (when apart and in good condition) - No Cylinder leaks - Lots of Hoses replaced - Slight leak from Control Panel - Good gauges and spool valves - Hydraulic Tank repaired, cleaned, and new filters and new oil (12 hours ago) - Bean Pump has new fluid end and in good condition - Table Modified to accept 400 mm Casing and running 300 mm Square Slips Plate - Original UDR Table available - Rod Safety Cage Included Truck Make: International Model: Acco T2650 Engine: Cummins 350 Big Cam Transmission: 18 Speed Road Ranger Type: 8x4 - No Oil Leaks - Lots spent for Rego - Cab has minimal rust - Tyres New 3 years ago and done 7,000 km's since Truck Mounted Drill Rig Location: South Australia Learn More

Model: DAC150 Year: 2022 Hours: 1,211 Engine: Caterpillar CAT 3406 Track Base: Morooka 2500 (Stripped & Rebuilt - Subframe and Chassis extended and Track Frame moved central to machine) - Tilt/Dump Rod Bin (Holds 40x 3 Metre Rods - 120 Metres) - Sullair 1150/350 Air Compressor - Airdrill Rotation Head - Bottom Mount Air Swivel - Automatic Blow Down - Sand Cyclone with Revolving Splitter - RC Cyclone with Cone Splitter - Hydraulic Fold Down Walkway with Pull Out Ladder - Pedal Operated Air Spanner - Hydraulic Breakouts Track Mounted Drill Rig Location: New South Wales, Australia Learn More

Make: Mobile Drill Model: B37 Year: 2012 Refurbished Year: 2025 (Comprehensively Rebuilt & Upgraded) Hours: 1,830 Engine: John Deere 4045TF285 Diesel Engine @ 99 HP Feed Stroke: 4 Metres with 15,700 lb Retract Force Rod Pull: 6 Metres Haul/Wireline/Jib Winch: 8,500 lb Front Mounted Recovery Winch: 20,000 lb Track Base: Remote Controlled MT-20 with Engineered FOPS for operator safety Rebuild & Upgrade; - Traverse Assembly & Traverse Box replaced and upgraded - New Toa-Tone SP8000 Sonic Drill Head (Oscillation Head) - New Hydrovane Compressor - New Tracks for improved mobility and stability - Upgraded Spindle Attachment - Full Service Completed with regular servicing history maintained Includes; - Dump Mast - Triple Clamp with Make & Break - Auto SPT Hammer - Bean W1122D Pump - Caterpillar CAT 430 Injection Pump - 10 Speed Mobile Drill Head - 30 Metres Sonic Tooling (140 mm Casing / 115 m Barrel) - Spares + Consumables - Upgraded Sonic Tooling to Boart Longyear standard Track Mounted Sonic + Conventional Drill Rig Location: Queensland, Australia Learn More

Make: Sullair Model: 900XHHDTQ Year: 2007 Hours: 1,399 (Hour Meter has stopped working) 900 CFM 500 PSI - Tri Axle Trailer Portable Air Compressor Location: New South Wales, Australia Learn More

Make: Hydco Model: 8V92 Year: 2021 Hours: 7,370 - New Air Side at 500 hours - Pistons, Rings, Barrels, etc. all out of Hydco - New Blower fitted in December with 60 hours - New Fuel Rack and Tune Up completed - Spare PRV's 1,800 CFM 900 PSI Skid Mounted Booster Location: Northern Territory, Australia Learn More

Make: Caterpillar Model: 390FL Year: 2020 Hours: 19,391 - Auxiliary Hydraulics (Never Used - Hoses were removed) - 2x Buckets in Good Condition; 1x with almost no use - No EPA Track Mounted Excavator Location: South America Learn More

Make: Caterpillar Model: 773G Year: 2014 Hours: 23,585 Idle Hours: 13,606 - New Tank - 3x Adjustable Rear Spray Heads - 2x Side Spray Heads - Hose Reel - Water Cannon - Top Fill Water Truck Location: United States of America Learn More

Make: Everdigm Model: Rocky B180 Bit Shank: N180 Shank Connection: API 8-5/8" Inch Reg. Pin Piston Stroke: 5.75" Inch Cylinder Bore: 12.28" Inch Hole Sizes: 18" Inch ~ 26" Inch Wrench Size: A/F 14" Inch - Brand New - Bailing Subs/Break Out Plate, etc. - Hammer forklift cradle included - 19” Hammer bit included (unused) RS Hammer Location: Queensland, Australia Learn More

Make: SPX Flow Model: FRE50-125B G1 MQ1 Johnson - Self-Priming - Cast Iron Housing and Impeller Centrifugal Pump Location: New South Wales, Australia Learn More

Make: SPX Flow Model: CB.65C-125R6.A6 CombiBloc Johnson Year: 2024 Max. Capacity: 850 m3/h Max. Head: 105 m Max. Working Pressure: 10 bar Max. Temperature: 120 degrees Celsius Max. Speed: 3,600 RPM - Comes with 5.5 kW 4 Pole Motor - Stainless Steel Pump Housing and Impeller - Never Used Centrifugal Pump Location: New South Wales, Australia Learn More

Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - Warman Clamps - Under Casing Clamps - Wireline and Main Winch - Rod Bin - Auger Carrying Rack at Front of Rig - Auto SPT - Silvan Pump - All New Suction and Hydraulic Hoses for Pump with Camlocks - 2x Mud Tanks (1,000 L & 500 L - Plastic) Down Hole Gear - 10x 3m PQ Rods Plus Shorts - 10x 3m HQ Rods Plus Shorts - 10x 3m NQ Rods Plus Shorts - 10x 3m Junior Mayhew Rods with Spanner Flats Plus 2x 1.5 m - 5x 100mm x 1.5m Augers Plus Bit & 20 Pins - 2x 1.5 NMLC Core Barrels - 6x NMLC Core Bits - 4x Impreg & 2x Surface Set - 40x Core Lifters / 6x Cases / 40x Stop Rings - 2x NMLC Reamers - 2x BQ Reamers - 3x BQ Core Bits - 2x 1.5m NQ3 Core Barrels - 2x Sets of Splits - 1x 3m NQ3 Core Barrel - 2x Locking Couplings - 2x Adaptor Couplings - Box of Barrel Spares - 1x HQ/NQ Overshot - 1x Set of PQ, HQ, NQ Inner Tube Wrenches - 10x 75mm Shelby Tubes Plus Drive Head - 10x 50mm Shelby Tubes Plus Drive Head - 2x SPT Samplers - 2x Pulling Plugs - 1x Spare Water Swivel Plus 2x Repair Kits - 1x Repair Kit for Rig Swivel - Many Subs to Facilitate all the Drilling Requirements - Stillsons - 2x 36" Inch, 2x 24" Inch & 2x 18" Inch - 1x Gas Mig Welder - 1x Honda 3.5 kVA Powered Generator - 1x PQ Birds Mouth for Water Return to Mud Tanks - 1x HQ Birds Mouth for Water Return to Mud Tanks - New Suction and Delivery Hoses - 1x 100mm Down Hole Hammer with 2x Bits 118mm *New* - 1x 75mm Down Hole Hammer with 2x Bits 95mm *New* Support Truck Make: Mitsubishi Model: Canter Year: 2009 Type: 4x4 - Hydraulic Hi-Ab Crane - 500 Litre Water Tank - 400 Litre Diesel Tank for Rig & 12 Volt Pump - 1x kVA Inverter - Wired so diesel pump won't engage until the switch is turned on in the locked tool box. - 1x Centrifugal Pump 1 1/2" Inch plus Suction and Delivery Hoses with Camlocks - 2x Tool Boxes - 1x Box of Hand Spanners & Sockets - Fitted Drill Rod Bins & Core Barrel Bins - Currently Registered until May 2025 Tracked Mounted Drill Rig Support Truck + Down Hole Gear Package Location: New South Wales, Australia Learn More

Make: JLG Model: 460SJ Year: 2007 Hours: 1,307 Boomlift Location: New South Wales, Australia Learn More

Make: New Holland Model: B115B Backhoe Location: New South Wales, Australia Learn More

Make: Eddie's Trailers & Steel Model: TTT Year: 2021 Tare: 3,740 kg ATM: 20,000 kg Tandem Axle Pig Trailer Location: New South Wales, Australia Learn More

Make: Drill Techniques Model: GM-2GI Year: 2020 Height: 3.5 Metres Tare: 4,000 kg Hydraulic Jack Up Grout Unit Location: New South Wales, Australia Learn More

Make: Drill Techniques Model: GM-2GI Year: 2020 Height: 3.5 Metres Tare: 4,000 kg Hydraulic Jack Up Grout Unit Location: New South Wales, Australia Learn More

Make: Baroid IDP System Model: 360 Mud Cleaning System Location: New South Wales, Australia Learn More

Capacity: 15,000 Litre Quantity: 15 Above Ground Waste Sumps / Tanks Location: New South Wales, Australia Learn More