Search results for: 'receiv estate for size in menominee condit mi'
- Did you mean
- receiv estate for sale in menominee condit mi
- Related search terms
- forest river r poa 200 for sale
- forest revers r poa 2007 for sale
- forest ripper r poa 2008 for sale
- forest river r poa 2008 for sale
- foremost ripper r poa 2014 for sale
-
Sandvik Drilltech D75KS Track Mounted Rotary Blast Hole Drill Rig ($55,000 ex GST) (sale-ehub1616)For Sale$55,000.00Make: Sandvik Drilltech Model: D75KS Engine: Caterpillar CAT 3412 - 2 x Rotation Heads (One still on mast) - Complete Mast (New Generation) - Air End - Air Receiver - Newly Rebuilt Drifter Track Mounted Rotary Blast Hole Drill Rig Location: Northern Territory, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Northern Territory, Australia
MODEL D75KS
-
7x 6 Metre Lengths of Ozcon 12-3/4" Inch Casing (POA) (sale-ehub4084)For Sale$0.00Make: Ozcon Size: 12-3/4" Inch Length: 6 Metre Quantity: 7 Casing Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL 12-3/4" Inch
-
25x 6 Metre Lengths of 5-9/16" Inch Casing (POA) (sale-ehub4082)For Sale$0.00Size: 5-9/16" Inch Length: 6 Metre Quantity: 25 Casing Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL 5-9/16" Inch
-
2006 Caterpillar CAT C15 Skid Mounted Engine ($59,000 ex GST) (sale-ehub4016)For Sale$59,000.00Make: Caterpillar Model: C15 Year: 2006 Hours: 1,533 • 440 HP @ 2,100 RPM • 1482LB-FT @ 1,400 RPM • Air to Air intercooled • 12 Volt (We can covert to 24 Volt if required) • SAE #1 flywheel housing multi fit industrial flywheel. • If required, we can supply and install a Caterpillar Air Compressor to the motor which runs off the auxiliary drive. The motor has been removed from the unit and fully workshop inspected and run up under load on the Dyno, results are as follows: Workshop inspection: • Intake manifold clean. • Cylinder head and rocker gear clean, no moisture or sludge, tune ok. • Turbocharge in nice condition, no excessive shaft play. • Camshaft in nice condition, no pitting • Crankshaft in good condition (Standard) • Main bearings and Con rod bearings in good condition – minimal wear • Crankshaft end float within spec Load test Report • Oil pressure: Cold Idle 70psi / Cold Top Revs 85psi / Hot Idle 50psi / Hot Top Revs 75psi • Water temps: Top Radiator 92 degrees. Bottom Radiator 69 degrees. • Thermostat opened and engine recovered correctly. • Turbocharger boost: 23 PSI @ 2,100 RPM • Breathing/ Blow by: 20 mm @ idle 30 mm @ 1,200 RPM 50 mm @ 1,350 RPM. 120 mm @ 1,800 RPM. • Smoke condition: small amount of black on startup, none at idle and very small white under full load. Skid Mounted Engine Location: Queensland, Australia Learn MoreMachine hours 1,400
KILOMETERS N/A YEAR 2006
BRAND Caterpillar CAT
LOCATION Queensland, Australia
MODEL C15
-
2010 Ubuilt Cassady CTU Coil Tubing Unit Mounted on 2005 Ensign Carrier ($295,000 ex GST) (sale-ehub4015)For Sale$295,000.00Make / Model: Ubuilt Cassady CTU Carrier & Booster OD Year: 2010 Hours: 310 Engine: John Deere ATM: 61,500 kg Trailer Make: Ensign Model: C.T. 1000 Year: 2005 Tyre Size: 275/70R22.5 Rim Size: 8.25x22.5 Axle Group Load Carrying Capacity: 37,500 kg - Handrail and Stair Upgrade by Obadare CTU Coil Tubing Unit Carrier Mounted Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2010
BRAND N/A
LOCATION Queensland, Australia
MODEL Ubuilt Cassady CTU Carrier & Booster OD
-
2007 Drill Rig Mounted on 2007 Isuzu FTS 750 4x4 Table Top Truck ($145,000 ex GST) (sale-ehub4003)For Sale$145,000.00Rig Year: 2007 Hours: 3,000 Engine: Caterpillar (85 HP) Stroke: 3,300 mm - 2 Speed Head Rotation Torque: 2,500/450 Nm Rotation Speed: 140/750 RPM Pullback: 7,000 kg Pull Down: 4,000 kg - Set up for Geotechnical Drilling with Auto SPT - 1x Main Winch - 2x Wireline Winch - Mono Pump - Four Jack Legs - Drilling Rods, Alloy Mud Tanks, Accessories for 50 m (All in Good Condition) Truck Make: Isuzu Model: FTS 750 Year: 2007 KM's: 55,000 Type: 4x4 Table Top Truck Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours 3,000
KILOMETERS 55,000
YEAR 2007
BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
5x 2018 & 3x 2019 Caterpillar CAT 745 Dump Trucks (POA) (sale-ehub3984)For Sale$0.00Make: Caterpillar Model: 745 Year: 2018 & 2019 Quantity: 3x 2019 / 5x 2018 - No EPA or CE Condition: Excellent & Good Tyres Dump Trucks Location: Chile Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2018
BRAND Caterpillar
LOCATION Chile
MODEL 745
-
2007 Atlas Copco RD20-III Carrier Mounted Drill Rig (POA) (sale-ehub3983)For Sale$0.00Make: Atlas Copco Model: RD20-III Year: 2007 Hours: 7,500 - In Good Working Order - Full Service Report Available This used 2007 RD20 Range III Atlas Copco Rig is a powerful and versatile drilling machine, ideal for a wide range of applications. Equipped with on IR 1,250 CFM / 350 PSI Air Compressor, this rig delivers exceptional performance and efficiency. Powered by a robust CAT C13 engine, the rig ensures smooth operation and ample power. The Cummins QSK19 deck engine further enhances its performance capabilities, delivering 755 HP for demanding drilling tasks. With a substantial pullback capacity of 120,000 lbs (54,446 kg), this rig can handle tough drilling conditions with ease. Mounted on a crane carrier truck, this RD20 III Atlas Copco Rig provides excellent mobility and stability. The rig has been meticulously maintained to ensure optimal condition and longevity. Its clean appearance reflects the owner’s commitment to proper care and maintenance. Carrier Mounted Drill Rig Location: New South Wales, Australia Learn MoreMachine hours 7,500
KILOMETERS N/A YEAR 2007
BRAND Atlas Copco
LOCATION New South Wales, Australia
MODEL RD20-III
-
Hydramaster 2000 Cable Tool Drill Rig Mounted on 1998 International Acco 4x2 Truck & Tri Axle Trailer ($99,000 ex GST) (sale-ehub3957)For Sale$99,000.00Rig Make: Hydramaster Model: 2000 - Fully Tooled & Spares - Recently painted Truck Make: International Model: Acco Year: 1998 KM's: 506,309 Type: 4x2 Engine: Cummins 300 HP Gearbox: 9 Speed Tri Axle Trailer - Near New - Set up for cable tool equipment Condition: Good Truck Mounted Cable Tool Drill Rig Tri Axle Trailer Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS 506,309
YEAR 1998
BRAND Hydramaster
LOCATION Queensland, Australia
MODEL 2000
-
Schramm 685 Track Mounted Drill Rig with Onboard Air Compressor ($1,200,000 ex GST) (sale-ehub3582)For Sale$1,200,000.00Rig Make: Schramm Model: 685 Year: 1996 Hours: 2,500 (Since Rebuild) Engine: Cummins K19 Accessories; - FOPS - Rod Rack - 4x Levelling Jacks - In Mast Make/Break Rod Break Out System - Rotating Cyclone Set Up on Metz Manipulator - Airdrill Maker Breaker - Air Spanner - KL Rod Handler Set to 4.5" Inch Pipe - Dual RC Swivel and Auto Blow Down - ROPS Air-Conditioned Drillers Cabin - Complete Re-Hose 11/25 - Fire Suppression Air Compressor Make: Sullair 1,150 CFM / 500 PSI Water Capacity: Approx. 500 Litres Dimensions; Height: 4.6 m Width: 4.0 m Track Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours 2,500
KILOMETERS N/A YEAR 1996
BRAND Schramm
LOCATION Queensland, Australia
MODEL 685
-
Gemco H13 Drill Rig Mounted on 1985 Isuzu FTS 4x4 Truck ($35,000 ex GST) (sale-ehub3927)For Sale$35,000.00Rig Make: Gemco Model: H13 Engine: Ford Diesel 4 Cylinder Condition: Fair - 3 Metre Stroke - 7.5 Metre Mast - Water Injection Pump - New Hydraulic Pump - Couple of leaks at spool pack / leavers Truck Make: Isuzu Model: FTS Year: 1985 KM's: 168,000 Type: 4x4 Truck Mounted Drill Rig Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS 168,000
YEAR 1985
BRAND Gemco
LOCATION New South Wales, Australia
MODEL H13
-
2012 Caterpillar CAT 775G Truck with MEGA Water Tank (POA) (sale-ehub3926)For Sale$0.00Make: Caterpillar Model: 775G Year: 2012 Hours: 8,737 Water Tank: MEGA Condition: Very Good Water Tank Truck Location: Chile Learn MoreMachine hours 8,737
KILOMETERS N/A YEAR 2012
BRAND Caterpillar
LOCATION Chile
MODEL 775G
-
2013 Caterpillar CAT 777G Truck with Mega TT20 20,000 Gallon Water Tank (POA) (sale-ehub3925)For Sale$0.00Make: Caterpillar Model: 777G Year: 2013 Hours: 5,575 Condition: Very Good Water Tank Make: Mega Model: TT20 Gallons: 20,000 Water Tank Truck Location: Chile Learn MoreMachine hours 5,575
KILOMETERS N/A YEAR 2013
BRAND Caterpillar
LOCATION Chile
MODEL 777G
-
S Reps 750 Gear Package ($8,000 ex GST) (sale-ehub3900)For Sale$8,000.00Includes; - 2x Complete Hammers (1x with a Hole Opener) - 1x Hammer in parts (Can Assemble with New Casing) - 17x Various Sized Shrouds (Mostly New) - 10x Bits (5x New & 5x Had One Run but Nearly New) - 7x Hammer Tubes - 4.5" Inch Remet to Metzke Hammer Adaptor and Inner Tubes - Various Other Spares S Reps 750 Gear Package Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL See Description
-
Sandvik DD420 Underground Mining Truck Cooler Pack ($2,500 ex GST) (sale-ehub3898)For Sale$2,500.00Make: Sandvik Model: DD420 - Was from Running Machine Condition: Good Cooler Pack Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Western Australia
MODEL DD420
-
Mercedes Benz OM904LA.E3A/2-00 Engine ($22,500 ex GST) (sale-ehub3896)For Sale$22,500.00Make: Mercedes Benz Model: OM904LA.E3A/2-00 - Was Removed from Running Machine Condition: Good Engine Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Mercedes Benz
LOCATION Western Australia
MODEL OM904LA.E3A/2-00
-
4x Sandvik DD420 Underground Mining Truck Bridgestone 12.00R20 Wheel Set ($8,750 ex GST) (sale-ehub3894)For Sale$8,750.00Make: Sandvik Model: DD420 Tyres: Bridgestone 12.00R20 - Typical Wear & Tear - Surface Rust on Rims - Was Removed from Running Machine Condition: Good Quantity: 4 Wheel Set Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Western Australia
MODEL DD420
-
8x DIAEDGE W168WDP203R-140 MG10 8" Inch Drill Bits (POA) (sale-ehub3888)For Sale$0.00Make: DIAEDGE Model: W168WDP203R-140 MG10 Size: 8" Inch Quantity: 8 Drill Bit Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND DIAEDGE
LOCATION Queensland, Australia
MODEL W168WDP203R-140 MG10
-
Homemade Stabilizer (POA) (sale-ehub3861)For Sale$0.00Make: Homemade Condition: Used Stabilizer Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Home Made
LOCATION Western Australia
MODEL N/A
-
8 1/2" Inch PDC Drill Bit (POA) (sale-ehub3860)For Sale$0.00Size: 8 1/2" Inch - PDC Condition: Good Drill Bit Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL 8 1/2" Inch
Filter