Search results for: 'wheel to load for reel for size'
- Related search terms
- wheel to load for rent for sale
- wheel to loader for rent for sale
- size we enabled rate in bros
- size we enabled rate in bore
- size we enabled rate in base
-
2014 Caterpillar CAT 773G Water Truck (POA) (sale-ehub4176)For Sale$0.00Make: Caterpillar Model: 773G Year: 2014 Hours: 23,585 Idle Hours: 13,606 - New Tank - 3x Adjustable Rear Spray Heads - 2x Side Spray Heads - Hose Reel - Water Cannon - Top Fill Water Truck Location: United States of America Learn MoreMachine hours 23,585
KILOMETERS N/A YEAR 2014
BRAND Caterpillar
LOCATION United States of America
MODEL 773G
-
Everdigm Rocky B180 API 8-5/8" Inch Reg. Pin RS Hammer with N180 Shank ($35,000 ex GST) (sale-ehub3765)For Sale$35,000.00Make: Everdigm Model: Rocky B180 Bit Shank: N180 Shank Connection: API 8-5/8" Inch Reg. Pin Piston Stroke: 5.75" Inch Cylinder Bore: 12.28" Inch Hole Sizes: 18" Inch ~ 26" Inch Wrench Size: A/F 14" Inch - Brand New - Bailing Subs/Break Out Plate, etc. - Hammer forklift cradle included - 19” Hammer bit included (unused) RS Hammer Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Everdigm
LOCATION Queensland, Australia
MODEL Rocky B180
-
54x 3 Metre Lengths of 4" Inch Remet RC Drill Pipe with Inner Tubes ($650 ex GST per length) (sale-ehub4081)For Sale$650.00Make: Remet Size: 4" Inch Length: 3 Metres Quantity: 54 - RC - With Inner Tubes Drill Pipe Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Remet
LOCATION Queensland, Australia
MODEL 3 Metre
-
Annular Diverter (FOR HIRE/RENT - POA) (hire-ehub4126)For Sale$0.00Sizes: 3" Inch / 4" Inch / 5" Inch Working Pressure: 2,500 PSI - Basic Hard Shut in Nitrile Bladder - Wireline Stripper - Hydraulic Activator - Hand Pump Activator - All Hoses Burst Protection or Fire Protected - Zone One Hoses are Coflexip and Armour Plated - Casing Adaptor to be purchased Annular Diverter Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL 3" / 4" / 5" Inch
-
600 GPM Shale Shaker Mounted on Jack Up Rod Sloop (FOR HIRE/RENT - POA) (hire-ehub4125)For Hire- Fully Hydraulically Operated - No Electrics - Various API Screen Sizes available - 600 GPM Jack Up Rod Sloop Mounted Shale Shaker Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL 600 GPM
-
7x 6 Metre Lengths of Ozcon 12-3/4" Inch Casing (POA) (sale-ehub4084)For Sale$0.00Make: Ozcon Size: 12-3/4" Inch Length: 6 Metre Quantity: 7 Casing Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL 12-3/4" Inch
-
25x 6 Metre Lengths of 5-9/16" Inch Casing (POA) (sale-ehub4082)For Sale$0.00Size: 5-9/16" Inch Length: 6 Metre Quantity: 25 Casing Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL 5-9/16" Inch
-
Exploration Drill Masters EDM MKI Track/Jack Up Rod Sloop Mounted Rod Feeder (EOI) (sale-ehub4077)For Sale$0.00Make: Exploration Drill Masters EDM Model: MKI Year: 2020 Hours: 502 Engine: Hatz 1B20V - All Haul and Drive Subs Included (HRQ, NRQ) Capacity; Max Load Capacity: 15,000 kg - Capacity for 2,000 Nm NQ Drill Pipe in 6 Metre Lengths Track Base; Make: Strickland Model: DT224E - Positioning Tracks Dimensions; Overall Platform Width: 2,460 mm Overall Platform Length: 7,466 mm Overall Height: 2,765 mm Empty Weight: 10,500 kg Clearance When Jacked Up: 1,650 mm Track Mounted Jack Up Rod Sloop Rod Feeder Location: Western Australia Learn MoreMachine hours 502
KILOMETERS N/A YEAR 2020
BRAND EDM
LOCATION Western Australia
MODEL MKI
-
2020 Komatsu WA 900-8 Wheel Loader (POA) (sale-ehub4018)For Sale$0.00Make: Komatsu Model: WA 900-8 Year: 2020 Hours: 14,212 Wheel Loader Location: United States of America Learn MoreMachine hours 14,212
KILOMETERS N/A YEAR 2020
BRAND Komatsu
LOCATION United States of America
MODEL WA 900-8
-
2006 Caterpillar CAT C15 Skid Mounted Engine ($59,000 ex GST) (sale-ehub4016)For Sale$59,000.00Make: Caterpillar Model: C15 Year: 2006 Hours: 1,533 • 440 HP @ 2,100 RPM • 1482LB-FT @ 1,400 RPM • Air to Air intercooled • 12 Volt (We can covert to 24 Volt if required) • SAE #1 flywheel housing multi fit industrial flywheel. • If required, we can supply and install a Caterpillar Air Compressor to the motor which runs off the auxiliary drive. The motor has been removed from the unit and fully workshop inspected and run up under load on the Dyno, results are as follows: Workshop inspection: • Intake manifold clean. • Cylinder head and rocker gear clean, no moisture or sludge, tune ok. • Turbocharge in nice condition, no excessive shaft play. • Camshaft in nice condition, no pitting • Crankshaft in good condition (Standard) • Main bearings and Con rod bearings in good condition – minimal wear • Crankshaft end float within spec Load test Report • Oil pressure: Cold Idle 70psi / Cold Top Revs 85psi / Hot Idle 50psi / Hot Top Revs 75psi • Water temps: Top Radiator 92 degrees. Bottom Radiator 69 degrees. • Thermostat opened and engine recovered correctly. • Turbocharger boost: 23 PSI @ 2,100 RPM • Breathing/ Blow by: 20 mm @ idle 30 mm @ 1,200 RPM 50 mm @ 1,350 RPM. 120 mm @ 1,800 RPM. • Smoke condition: small amount of black on startup, none at idle and very small white under full load. Skid Mounted Engine Location: Queensland, Australia Learn MoreMachine hours 1,400
KILOMETERS N/A YEAR 2006
BRAND Caterpillar CAT
LOCATION Queensland, Australia
MODEL C15
-
2010 Ubuilt Cassady CTU Coil Tubing Unit Mounted on 2005 Ensign Carrier ($295,000 ex GST) (sale-ehub4015)For Sale$295,000.00Make / Model: Ubuilt Cassady CTU Carrier & Booster OD Year: 2010 Hours: 310 Engine: John Deere ATM: 61,500 kg Trailer Make: Ensign Model: C.T. 1000 Year: 2005 Tyre Size: 275/70R22.5 Rim Size: 8.25x22.5 Axle Group Load Carrying Capacity: 37,500 kg - Handrail and Stair Upgrade by Obadare CTU Coil Tubing Unit Carrier Mounted Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2010
BRAND N/A
LOCATION Queensland, Australia
MODEL Ubuilt Cassady CTU Carrier & Booster OD
-
2010 IMS Bulwark 200 20 Tonne Work-Over Drill Rig ($75,000 ex GST) (sale-ehub3977)For Sale$75,000.00Make: IMS Model: Bulwark 200 Year: 2010 Max Operating Wind Velocity: 12.5 m/sec Max Rated Hook Load: 196kN Height: 16 Metres 20 Tonne Work-Over Drill Rig Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2010
BRAND IMS
LOCATION Queensland, Australia
MODEL Bulwark 200
-
Exploration Drill Masters EDM MKII Track/Jack Up Rod Sloop Mounted Rod Feeder (EOI) (sale-ehub3931)For Sale$0.00Make: Exploration Drill Masters EDM Model: MKII Hours: 539 Engine: Hatz 1D90V Max. Load Capacity: 15,000 kg Hydraulics: Rexroth 28CC Piston Pump - Capacity for 1,900 m NQ Drill Pipe in 6 m Lengths - 270 Degree Range of Movement - 2.1 m Arm Displacement - 4.770 m Roller Travel Roller Tramming Speed: 0.79 m/s Track Base Make: Sejin Model: 2P254075 Max. Speed: 0.6 km/h - 2 Speed Jack Up Base - 4 Extending Jack Legs - 1.8 m Jack Up Height Dimensions; Overall Platform Length: 8,460 mm Overall Platform Width: 2,500 mm Overall Height: 2,470 mm Empty Weight: 13,000 kg Clearance When Jacked Up: 1,650 mm Track Mounted Jack Up Rod Sloop Rod Feeder Location: Western Australia Learn MoreMachine hours 539
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL EDM MKII
-
2012 Caterpillar CAT 992K Wheel Loader (POA) (sale-ehub3905)For Sale$0.00Make: Caterpillar Model: 992K Year: 2012 Hours: 20,199 - No EPA - No CE Wheel Loader Location: Chile Learn MoreMachine hours 20,199
KILOMETERS N/A YEAR 2012
BRAND Caterpillar
LOCATION Chile
MODEL 992K
-
S Reps 750 Gear Package ($8,000 ex GST) (sale-ehub3900)For Sale$8,000.00Includes; - 2x Complete Hammers (1x with a Hole Opener) - 1x Hammer in parts (Can Assemble with New Casing) - 17x Various Sized Shrouds (Mostly New) - 10x Bits (5x New & 5x Had One Run but Nearly New) - 7x Hammer Tubes - 4.5" Inch Remet to Metzke Hammer Adaptor and Inner Tubes - Various Other Spares S Reps 750 Gear Package Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL See Description
-
4x Sandvik DD420 Underground Mining Truck Bridgestone 12.00R20 Wheel Set ($8,750 ex GST) (sale-ehub3894)For Sale$8,750.00Make: Sandvik Model: DD420 Tyres: Bridgestone 12.00R20 - Typical Wear & Tear - Surface Rust on Rims - Was Removed from Running Machine Condition: Good Quantity: 4 Wheel Set Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Western Australia
MODEL DD420
-
8x DIAEDGE W168WDP203R-140 MG10 8" Inch Drill Bits (POA) (sale-ehub3888)For Sale$0.00Make: DIAEDGE Model: W168WDP203R-140 MG10 Size: 8" Inch Quantity: 8 Drill Bit Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND DIAEDGE
LOCATION Queensland, Australia
MODEL W168WDP203R-140 MG10
-
Dust Suppression (FOR HIRE/RENT - POA) (hire-ehub3874)For HirePower (kW): 9-13, 30-50, 58-90, 150 Min. Flow (m3/hr): 1.5-6, 4.8-9, 8-15, 15-24 Throw (m): 30-50, 70-100, 120-150, 250 Oscillation (Deg): 0-360 Throw Angle (Deg): -5 to +45 - Stockpiles - Mine Blast Dust - Conveyor Discharge Chutes - Dust Hoppers - Crusher Machinery - Loading and Unloading Trucks - General Pollution - Airborne Dust - Construction Sites - Odor Control and Management Dust Suppression Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
Dust Suppression (POA) (sale-ehub3874)For Sale$0.00Power (kW): 9-13, 30-50, 58-90, 150 Min. Flow (m3/hr): 1.5-6, 4.8-9, 8-15, 15-24 Throw (m): 30-50, 70-100, 120-150, 250 Oscillation (Deg): 0-360 Throw Angle (Deg): -5 to +45 - Stockpiles - Mine Blast Dust - Conveyor Discharge Chutes - Dust Hoppers - Crusher Machinery - Loading and Unloading Trucks - General Pollution - Airborne Dust - Construction Sites - Odor Control and Management Dust Suppression Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
8 1/2" Inch PDC Drill Bit (POA) (sale-ehub3860)For Sale$0.00Size: 8 1/2" Inch - PDC Condition: Good Drill Bit Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL 8 1/2" Inch
Filter