Search results for: 'blast gener high for spare'

Make / Model: Solar Generators - Full Solar Data Logging - Full Monthly Data Logging for Carbon Offsets Peak Power: 6 kW Continuous: 2.4 kW Battery Storage: 12 kWh Solar Power: 2,520 W Weight: 750 kg appox. Pricing: 1-7 days $120.00 per day ex GST 8-30 days $105.00 per day ex GST Trailer Location: New South Wales, Australia Learn More

Make: Newage Stamford Model: SC634B Year: 1999 Hours: 371 Engine: Detroit 12V149 Diesel Quad Turbo + Twin Super Charged @ 800 HP - Control Cabinet - 4x Bolt On, Fold Up and Down Steel Walk Platforms for Side Access - 760 kVA / 1057 AMPS / 415 Volt - Load Tested 12 months ago and stored since - unused - Video of load test available on request - Batteries Included - Battery Holder / Stand - 1000 Litre Fuel Tank Available (Not original, but easily plumbed by competent person) - Fuel Tank Stand - Muffler and Engine Pipes Included Skid Mounted Generator Location: Victoria, Australia Learn More

Make: Sullair Model: Dino DXN12 (ID Plate on 1 Unit Only) - Plus 1 only Disassembled Quantity: 3 High Pressure Compressor Units Rotary Screw Air Ends Location: Western Australia Learn More

Make: Narrow Series Model: KWL350RC DTH Fitted with Twin Saeur Danfoss OMTW 315 Hydraulic Orbital Motors Condition: New (Spare Part) Drill Rig Top Head Rotation Drive Unit Location: Western Australia Learn More

Make: General Breaker Model: GB7TL/GB8ATL Weight: 18-22 Tonne Titan Headplate: 80 mm pins, 320 mm ears and 470 mm centers - Industry standard breaker with Australian dealer and parts support - Comes with toolbox containing gas charge kit, tools and spares Full in house rebuild with the following new parts; - Tie Rods - Tool Retainers - Upper and Lower Bushes - Full Seal Kit - Charge Valve - Wedge Chisel - All Hardware and Fasteners Flame Resistant Hydraulic Hoses Piston and Bore in Perfect Condition Transport and Storage Stand Supplied Operators Manual in PDF Full 12 month Workshop warranty supplied Excavator Hammer Rock Breaker Location: Australia Learn More

Rig Make: Sandvik Model: UDR650 Year: 1988 Hours: 6,568 - Historical Maintenance / Service Records Available - UDR650 Equipment Manuals - Upgrade - Mast Replaced March 2019 - Equipment upgraded / refitted every year to comply with standards and maintenance - Department of Transport Pit Inspections - Yearly - Compliance Certifications - NDT - Yearly - Lifting Register - Bi-Annual - Fire Extinguishers - Bi-Annual - Brake Tests - Bi-Annual - Spare Mast & Traverse Cylinder Included - No Onboard Air Compressor - Traverse cylinder - Tower / Mast (The mast was replaced approx. 3 years ago) - Steel hydraulic piping up the tower - New back plate for the Head Rack Truck Make: International Model: 2250-D Year: 1988 KM's: 94,122 Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Specifications; - 50 mm Tow-Ball Coupling & Dual Safety Chains - 50 mm Solid Square Axles - 9 Leaf Load Share Suspension - 12" Inch Electric Brakes - Electric Breakaway Unit - LED Tail, Indicator and Marker Lights - 15" Inch Sunraiser Wheels with 8 Ply Light Truck Tyres - 2 x Spare Wheels - 4 x Adjustable Stabiliser Legs Dimensions; Transport Width: 2.45 m Transport Height: 3.0 m Transport Length: 5.5 m Capacities; - Tare Weight: 2,500 kg to 2,750 kg - ATM: 3,500 kg Functions & Features; - Pigeonholes and under-bench tool storage - 125 mm Multipurpose Vice - Tooling and Hard Hat Hooks - 1 x Personal Access Door - Microwave - Fridge - Storage Cabinets - 5.5 kW Diesel Generator - 4 x Double Power Point GPO 10 AMP - 3.5 kW Daiken Split System Air Conditioner - Water Tank & Hand Wash Station - 8 x 12V/24V LED External Lights - 2 x 240v LED Internal Lighting - Retractable Awning - Dual Wheel Chocks Options; - Open Layout - Open plan full walkthrough - Split Layout - Separate workshop and office Roof mounted AC Unit (Domestic IBIS 4) Two-piece Rear Door 8.0 kW Diesel Generator Humpty Site Office / Workshop Trailers Location: Queensland, Australia Learn More

Make: Elastec Model: 770 Hours: Less than 250 KM's: Less than 1,000 Engine: 48 HP Diesel Year: 2019 Includes - Air Cooled Blower - Pulling Vacuum @ 770 CFM - Vacuum Clutch Present - Auxiliary Hydraulic Power - More Manoeuvrable than Vacuum Tanks - High Air Flow conveys material through long hoses - Heavy Duty Chassis - 27 Gallon / 102 Litre Fuel Tank - Hydraulic Brakes on all four wheels - Heavy Duty Suction Wand with Cyclonic Separator - DDT Approved Safety Chains and Hooks - Stabilizer Jacks for rear of trailer - Tongue extends 15 inches Spill Trailer Location: Nakuru, Kenya Learn More

Make: Cleveland Model: 400W Engine: Caterpillar CAT 3306 Quantity: 2 - Fully Guarded - Full Set of Buckets - Parts Including: - 20' Foot Container with Parts & Spare Engine (To be sold only internationally, not available to be sold in Australia) Trenchers Location: Queensland, Australia Learn More

Make: Atlas Copco Model: ROC D9C Hours: 12,000 - 13,000 Year: 2008 Drill Bit Size: 76 mm to 115 mm - The rock drill was rebuilt 250 impact hours ago - Has the original engine Condition: Good Track Mounted Drill Rig Location: Queensland, Australia Learn More

Drill Rig Frame / Base Make: Sandvik Model: UDR1000 Bare Mast Make: Sandvik Model: UDR1000 Bare Mast New Slides Sand Blasted & Painted Condition: Excellent Truck (Available additional option for $25,000 ex GST) Make: MAN Model: 41-403 Year: 1998 Rig Carrier Location: New South Wales, Australia Learn More

Make/Model: DW400C Year: New (2022) Machine Hours: 0 Engine: Cummins 6LTAA8.9 @ 360 HP Includes: - Sauer Danfoss Load Sensed Piston Pumps - Sauer Danfoss PVG Valves - 4 Speed Rotation Head 0-600 RPM / 16,000 Nm Torque - Sliding Head - Tilting Head - Floating Spindle with 2.5" Waterway - 25 Tonne Pullback - Dump Mast (Long Stroke) - 20" Inch Diameter Through the Work Table - Breakout Ram - 8 7.5" Inch Mud Pump (Made in India) - 10 Tonne Single Pull Winch Mounted on Top of Mast - Manuli Hoses on All High Pressure Lines - 4 x Enclosed Outriggers - Can extend for ease of loading onto a lowbed trailer *Can easily be converted to RC due to the large thru-hole in the rotation head* *Can be delivered on rails for mounting onto any truck* Location: Philippines Learn More

Drill Rig Make: Bourne Model: 2000 TDH-NT Truck 6x4 Crane Carrier 12v 1992 GM Powers Truck & Hydraulics 6 Speed Alison Automatic Drives Truck (High & Low Range) Rod Handler 5 1/2" x 8 Bourne Mud Pumps on Board Location: Western Australia Learn More

Make: Ingersoll Rand Engine: Detroit Diesel Hours: 5,831 Condition: Average Track Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Terex Reedrill Model: R20T Weight: 14,696kg Piston Hydraulic Pump Diesel Isuzu Engine Gardner Denver Tempest 12 Compressor Track Mounted Drill Rig Location: New South Wales, Australia Learn More

Make: Cortech Model: CSD1300L CSD1300L core drilling rig is specially designed for diamond core drilling. Track crawler mounted rig facilitates moving around with great convenience. Robust structure plus strong power supply ensures high penetration rate and outstanding reliability. Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. Specifications: Drilling Capacity Dia of Drill Rod BS,NS,HS,PS Drilling Depth 1,300m 1,000m 700m 400m Hydraulic System Pressure 26MPa Cooling Air Cooled Power System Model Cummins 6BTA5.9 –C180 Type Turbo Charged Power 132KW Engine RPM 2,500rpm Drill Head Max Torque 4,257Nm Max Rotation ,RPM 1,182rpm Feed Stroke 3.5m Max Inside Diameter 117mm Max Pull / Max Push 127KN/ 50KN Main Winch Max Pull 68KN Pulling Speed 28m/min Rope Diameter 16mm Rope Length 30m Wireline Winch Max Pull 11KN(bare drum) Pulling Speed 120m/min Rope Diameter 6.6mm Rope Length 1,000m Mast Length 10m Drilling Angle 45°-90° Dump Length 1.1m Foot Clamp Drill Rod BS, NS, HS, PS Travelling Capacity Max.Permissible Gradient 30° Max.Travelling Speed 2km/h Transporting Dimensions L×W×H 5,100×2,350×2,600mm Total Weight: 8.5t Diamond Coring Drill Rig Location: China Learn More

Make: Cortech Model: CSD3000 CSD3000 core drilling rig is specially designed for diamond core drilling. It provides precise control on the drilling capacity. The drill head is designed to slide and dump, together with the full angle rotation structure for drill mast, it effectively reduces manual inputs and improves efficiency. The hydraulic legs are stretchable, which broaden the bearing surface, and ensure outstanding reliability. Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. • 9 meters rod pulling largely improves drilling efficiency due to rod collection frame design on mast • The design of side shift by hydraulic of rotation head largely reduces working tensions and guarantees personnel safety • Multi-pressure gauge reads real time pressures for kinds of major components • High/low speed control of main winch largely meets speed requirements for rods handling • Stepless control of mud pump flow facilitates various drilling needs for mud • telescopic mast greatly reduces working tensions and improves drilling efficiency. • Horizontal extension of jack legs guarantees firm rig standing on the ground. • Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. • Independent tramming cab set in front provides full view for easy rig walking and driver’s safety • Mast dumping guarantees perfect stability during drilling; • Independent hydraulic jacks facilities leveling of the rig; • Great convenience of control of feed pressure; • Standardized parts and components make maintenance and repairing easy; • Real time reading of drilling data on gauges on the control panel; • Mud pump and mixer powered by the rig’s hydraulic system, controlled directly on the rig’s panel; • Top grade hydraulics of European origin; • Experienced engineers plus adequate spare parts ready to provide full service. Specifications: Drilling Capacity Dia of Drill Rod BS,NS,HS,PS Drilling Depth 3,000m 2,300m 1,600m 1,050m Hydraulic System Pressure 28MPa Cooling Air Cooled Power System Model Cummins 6LTAA8.9-C325 Type Turbo Charged Power 239KW Engine RPM 2,200rpm Drill Head Max Torque 8,170Nm Max Rotation ,RPM 1,250rpm Feed Stroke 3,450mm Max Inside Diameter 117mm Max Pull /Max Push 250KN/110KN Main Winch Max Pull 181.44KN Pulling Speed Low:33m/min High:70m/min Rope Diameter 24mm Rope Length 41m Wireline Winch Max Pull 18KN(bare drum) Pulling Speed 150m/min(bare drum) Rope Diameter 6.6mm Rope Length 2,500m Mast Length 11.2-13.7m Drilling Angle 45°-90° Dump Length 1.4m Foot Clamp Drill Rod BS, NS, HS, PS Travelling Capacity Max.Permissible Gradient 30° Max.Travelling Speed 2km/h Transporting Dimensions L×W×H 11,240×2,310×3,330mm Total Weight 23.5t Diamond Coring Drill Rig Location: China Learn More

Extreme HP Frac Pump Skid The Jack Up Skid when raised measures 1660 mm from ground to bottom of skid enough height for a trailer of 1500mm height to drive underneath. The Jack Up Skid dimensions are: 2505mm wide x 9135mm overall length and will reach a height of 2615 mm high when the jack legs are retracted and skid is sitting on the ground .Total height dimension of the skid is 4280 mm when the jacking legs are raised. Total Mass of unit complete with equipment 20 000 Kg. CAT C32 rated at 1350hp Allison 8000 series auto trans DP8962R Weir SPM pump Model Tw52250 Build date July 2008 Hours – Approx. 1000 Learn More